And use it almost everywhere. It is easy to use it for the
sysctl since the hypervisor and toolstack are intertwined.
But for the tmem hypercall we need to be dilligient (as it
is guest facing) so delaying that to another patch:
"tmem: Use 'struct xen_tmem_oid' for every user" to help
with bisection issues.
We also move some of the parameters on functions to be within
the right location.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jen Beulich <jbeulich@suse.com>
It mentions it but it is never used. The hypercall interface
knows nothing of this sort of thing either. Lets just remove it.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com> [release + toolstack]
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Update the libxc spec to indicate more sternly that TOOLSTACK records
should no longer be used.
Also, trim further toolstack infrastructure which should have gone in
c/s 39bf4e9 "tools/libxl: Drop all knowledge of toolstack callbacks"
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Added support for a new class of vm_events: VM_EVENT_REASON_REQUEST,
sent via HVMOP_request_vm_event. The guest can request that a
generic vm_event (containing only the vm_event-filled guest registers
as information) be sent to userspace by setting up the correct
registers and doing a VMCALL. For example, for a 32-bit guest, this
means: EAX = 34 (hvmop), EBX = 24 (HVMOP_guest_request_vm_event),
ECX = 0 (NULL required for the hypercall parameter, reserved).
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Tamas K Lengyel <tlengyel@novetta.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
And call it when a checkpoint record is found in the libxc stream.
Some parts of this patch have been based on patches from the COLO
series.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
v3: Named constants for the API
v2: Borrow sufficient fragments from several COLO patches to get
BROKEN_CHANNEL and checkpoint failover to function.
This is the xc/xl changes to support Intel Cache Allocation
Technology(CAT).
'xl psr-hwinfo' is updated to show CAT info and two new commands
for CAT are introduced:
- xl psr-cat-cbm-set [-s socket] <domain> <cbm>
Set cache capacity bitmasks(CBM) for a domain.
- xl psr-cat-show <domain>
Show CAT domain information.
Examples:
[root@vmm-psr vmm]# xl psr-hwinfo --cat
Cache Allocation Technology (CAT):
Socket ID : 0
L3 Cache : 12288KB
Maximum COS : 15
CBM length : 12
Default CBM : 0xfff
[root@vmm-psr vmm]# xl psr-cat-cbm-set 0 0xff
[root@vmm-psr vmm]# xl psr-cat-show
Socket ID : 0
L3 Cache : 12288KB
Default CBM : 0xfff
ID NAME CBM
0 Domain-0 0xff
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. Extend I/O req server creation so the caller can
indicate that it is using suitable atomic accesses where needed (not
all accesses to the two pointers really need to be atomic), allowing
the hypervisor to atomically canonicalize both pointers when both have
gone through at least one cycle.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
As suggested by Andrew Cooper, this patch attempts to remove
some redundancy and allow for an easier time when adding vm_events
for new control registers in the future, by having a single
VM_EVENT_REASON_WRITE_CTRLREG vm_event type, meant to serve CR0,
CR3, CR4 and (newly introduced) XCR0. The actual control register
will be deduced by the new .index field in vm_event_write_ctrlreg
(renamed from vm_event_mov_to_cr).
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Said commit ("libxl_set_memory_target: retain the same maxmem offset on
top of the current target") caused a regression for "xl mem-set"
against Dom0: While prior to creation of the first domain this works,
the first domain creation involving ballooning breaks. Due to "enforce"
not being set in the domain creation case, and due to Dom0's initial
->max_pages (in the hypervisor) being UINT_MAX, the calculation of
"memorykb" in the first "xl mem-set" adusting the target upwards
subsequent to domain creation and termination may cause an overflow,
resulting in Dom0's maximum getting to a very small value. This small
maximum will the make the subsequent setting of the PoD target fail.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When we use a DECLARE_HYPERCALL_BUFFER_SHADOW it defines a user
pointer '_name' and a shadow xc_hypercall_buffer_t.
When calling xc_hypercall_buffer_free_pages(_xch, _name, _nr),
the complier will report '_name' unused error, because
xc_hypercall_buffer_free_pages() is a MACRO and '_name' is
transparently converted to the hypercall buffer. it confuses
the caller because xc_hypercall_buffer_free_pages() looks
like a function and takes '_name' as an arg.
Add an if check to let the compiler think we are actually
using the argument '_name'.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
[ ijc -- some rewording of the commit message ]
There are cases where we only need to use the hypercall buffer data,
and do not use the xc_hypercall_buffer_t struct.
DECLARE_HYPERCALL_BUFFER_SHADOW defines a user pointer that can allow
us to access the hypercall buffer data but it also defines a
xc_hypercall_buffer_t that we don't use, the compiler will report arg
unused error.
Add __attribute__((unused)) before xc_hypercall_buffer_t to avoid
the compiler error.
Example cases:
In send_all_pages(), we only need to use the hypercall buffer data
which is a dirty bitmap, we set the dirty bitmap to all dirty and call
send_dirty_pages, we will not use the xc_hypercall_buffer_t and hypercall
to retrieve the dirty bitmap.
In send_some_pages(), we will also only need to use the dirty_bitmap.
the retrieve dirty bitmap hypercall are done by the caller.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
The old code checks the callbacks "postcopy & checkpoint", if the
callbacks exists, it will call them. However this is unreliable, so
add this flag to explicitly indicate a checkpointed stream in the new
code. This is backward compatible with the legacy migration just don't
know this flag and will ignore it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Yang Hongyang <yanghy@cn.fujitsu.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
[ ijc -- added discussion of legacy compat ]
.. and use this new interface to display it along with CPU topology
and NUMA information when 'xl info -n' command is issued
The output will look like
...
cpu_topology :
cpu: core socket node
0: 0 0 0
...
device topology :
device node
0000:00:00.0 0
0000:00:01.0 0
...
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add set_xen_guest_handle_offset() macro that can be used for setting
xen_guest_handle to an offset into hypercall buffer.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xc_numainfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error logging macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xc_cputopoinfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error reporting macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A device node is described by a path. It will be used to retrieve the
node in the device tree and assign the related device to the domain.
Only non-PCI devices protected by an IOMMU can be assigned to a guest.
Also document the behavior of XEN_DOMCTL_deassign_device in the public
headers which differ between non-PCI and PCI.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
On x86, an IRQ is assigned in 2 steps to an HVM guest:
- The toolstack is calling PHYSDEVOP_map_pirq in order to create a
guest PIRQ (IRQ bound to an event channel)
- The emulator (QEMU) is calling DOMCTL_bind_pt_irq in order to
bind the IRQ
On ARM, there is no concept of PIRQ as the IRQ can be assigned to a
virtual IRQ using the interrupt controller.
It's not clear if we will need 2 different hypercalls on ARM to assign
IRQ and, for now, only the toolstack will manage IRQ.
In order to avoid re-using a fixed ABI hypercall (PHYSDEVOP_*) for a
different purpose and allow us more time to figure out the right out,
only DOMCTL_{,un}bind_pt_pirq is implemented on ARM.
The DOMCTL is extended with a new type PT_IRQ_TYPE_SPI and only IRQ ==
vIRQ (i.e machine_irq == spi) is supported.
In order to keep the same XSM checks done by the 2 hypercalls on x86,
call both xsm_map_domain_irq & xsm_bind_pt_irq in the ARM implementation.
Note: The toolstack changes for routing an IRQ to a guest will be done
in a separate patch.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Jan Beulich <jbeulich@suse.com>
xentrace is the only caller at the moment. Split the cpu and event
mask setting out into seperate functions, but leave the current limit
of 32 bits for masks passed in from the command-line.
Based on a patch from Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We export the xc_cpumap_alloc but not the bit operations.
One could include 'xc_bitops.h' but that is naughty - so instead
we just export the proper functions to do it on the xc_cpumap_t
typedef.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
----
v2: Use our own macro to make sure ARM is not affected negatively
v3: Lifted Ian's explanation.
For testing purposes, the environmental variable "XG_MIGRATION_V2" allows the
two save/restore codepaths to coexist, and have a runtime switch.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Thus far mem_access and mem_sharing memops had been able to signal
to Xen to start pulling responses off the corresponding rings. In this patch
we retire these memops and add them to the option to the vm_event_op domctl.
The vm_event_op domctl suboptions are the same for each ring thus we
consolidate them into XEN_VM_EVENT_ENABLE/DISABLE/RESUME.
As part of this patch in libxc we also rename the mem_access_enable/disable
functions to monitor_enable/disable and move them into xc_monitor.c.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
In preparation for allowing for introspecting ARM and PV domains the old
control interface via the hvm_op hypercall is retired. A new control mechanism
is introduced via the domctl hypercall: monitor_op.
This patch aims to establish a base API on which future applications can build
on.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Tim Deegan <tim@xen.org>
The only use-case of the mem_event_op structure had been in mem_paging,
thus renaming the structure mem_paging_op and relocating its associated
functions clarifies its actual usage.
As part of this fix-up we also convert the gfn's in the toolstack to be
explicitely 64-bit wide and clean the code a bit.
Signed-off-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
On ARM the virtual GIC may differ between each guest (emulated GIC version,
number of SPIs...). This information is already known at the domain creation
and can never change.
For now only the gic_version is set. In the long run, there will be more
parameters such as the number of SPIs. All will be required to be set at the
same time.
A new arch-specific structure arch_domainconfig has been created, the x86
one doesn't have any specific configuration, for now, a dummy structure
(C-spec compliant) has been created.
Some external tools (qemu, xenstore) may be required to create a domain.
Rather than asking them to take care of the arch-specific domain
configuration, let the current function (xc_domain_create) chose a
default configuration and introduce a new one (xc_domain_create_config).
This patch also drops the previously introduced DOMCTL arm_configure_domain
in Xen 4.5, as it has been made useless.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Keir Fraser <keir@xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
The commit a8f8a590e0
"libxc: Check xc_domain_maximum_gpfn for negative return values"
introduced an regression in tools outside libxc (migrate v2)
which wanted the unfiltered GPFN value. Said commit added
a wrapper which added +1 if there were no errors.
To make it work pre-commit a8f8a59 we add an xc_domain_nr_gpfns
which will add +1 if there are no errors (and change all in-tree
callers to use it). The xc_domain_maximum_gpfn will return the
unfiltered GPFN value.
Suggested-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A number of changes to XEN_SYSCTL_topologyinfo interface:
* Instead of copying data for each field in xen_sysctl_topologyinfo separately
put cpu/socket/node into a single structure and do a single copy for each
processor.
* A NULL cputopo handle passed is a request for maximum number of CPUs
(num_cpus). If cputopo is valid and num_cpus is smaller than the number of
CPUs in the system then -ENOBUFS is returned (and correct num_cpus is provided)
* Do not use max_cpu_index, which is almost always used for calculating number
CPUs (thus requiring adding or subtracting one), replace it with num_cpus.
* There is no need to copy whole op in sysctl to user at the end, we only need
num_cpus.
* Rename xen_sysctl_topologyinfo and XEN_SYSCTL_topologyinfo to reflect the fact
that these are used for CPU topology. Subsequent patch will add support for
PCI topology sysctl.
* Replace INVALID_TOPOLOGY_ID with "XEN_"-prefixed macros for each invalid type
(core, socket, node).
Update sysctl version to 0x0000000C
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Instead of assuming everything is always OK. As such
we return now the return value (or zero for success).
The max_mfn is now passed in as the parameter.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Instead of assuming everything is always OK. We stash
the gpfns value as an parameter. Since we use it in three
of places we might as well update xc_domain_maximum_gpfn
to do the right thing.
Suggested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The algorithm is more or less the same as the one used for PV guest.
Libxc gets hold of the mapping of vnode to pnode and size of each vnode
then allocate memory accordingly.
And then the function returns low memory end, high memory end and mmio
start to caller. Libxl needs those values to construct vmemranges for
that guest.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
From libxc's point of view, it only needs to know vnode to pnode mapping
and size of each vnode to allocate memory accordingly. Add these fields
to xc_dom structure.
The caller might not pass in vNUMA information. In that case, a dummy
layout is generated for the convenience of libxc's allocation code. The
upper layer (libxl etc) still sees the domain has no vNUMA
configuration.
Note that for this patch on PV x86 guest can have multiple regions of
ram allocated.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add a new field p2m_size to keep track of the number of pages covered by
p2m. Change total_pages to p2m_size in functions which in fact need
the size of p2m.
This is needed because we are going to ditch the assumption that PV x86
has only one contiguous ram region. Originally the p2m size was always
equal to total_pages, but we will soon change that in later patch.
This patch doesn't change the behaviour of libxc.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add Memory Bandwidth Monitoring(MBM) for VMs. Two types of monitoring
are supported: total and local memory bandwidth monitoring. To use it,
CMT should be enabled in hypervisor.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
- space: remove space after '(' or before ')' in 'if' condition;
- indention: align function definition/call arguments;
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When commit 6865e52b78, "PCI multi-seg: adjust domctl interface",
is introduced, we missed to sync that head file.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Wei Liu
Vitaly Kuznetsov
Konrad Rzeszutek Wilk
Ian Campbell
Andrew Cooper
Tamas K Lengyel
Julien Grall
Tiejun Chen
Razvan Cojocaru
Chao Peng
Dario Faggioli
Jan Beulich
Yang Hongyang
Boris Ostrovsky
Julien Grall
George Dunlap
Tamas K Lengyel