Also change libxl__cpuid_legacy to propagate the error from
xc_cpuid_apply_policy into callers.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
AMD Milan (Zen3) CPUs have an LFENCE Always Serialising CPUID bit in
leaf 80000021.eax. Previous AMD versions used to have a user settable
bit in DE_CFG MSR to select whether LFENCE was dispatch serialising,
which Xen always attempts to set. The forcefully always on setting is
due to the addition of SEV-SNP so that a VMM cannot break the
confidentiality of a guest.
In order to support this new CPUID bit move the LFENCE_DISPATCH
synthetic CPUID bit to map the hardware bit (leaving a hole in the
synthetic range) and either rely on the bit already being set by the
native CPUID output, or attempt to fake it in Xen by modifying the
DE_CFG MSR. This requires adding one more entry to the featureset to
support leaf 80000021.eax.
The bit is always exposed to guests by default even if the underlying
hardware doesn't support leaf 80000021. Note that Xen doesn't allow
guests to change the DE_CFG value, so once set by Xen LFENCE will always
be serialising.
Note that the access to DE_CFG by guests is left as-is: reads will
unconditionally return LFENCE_SERIALISE bit set, while writes are
silently dropped.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
[Always expose to guests by default]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
The removed lines were initially added by commit 314e64084d, but the
subsequent code which was using the nb_vm variable was later removed by
commit 2ba368d138, which makes these lines of code an overlooked
reminiscence. Moreover, the call becomes very expensive when there is a
considerable number of VMs (~1000 instances) running on the host.
Signed-off-by: Costin Lupu <costin.lupu@cs.pub.ro>
Acked-by: Wei Liu <wl@xen.org>
Like ERMS this can always be exposed to guests, but I guess once we
introduce full validation we want to make sure we don't reject incoming
policies with any of these set when in the raw/host policies they're
clear.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Implementing qrexec+usbip+qemu in Linux-based stub domain leads me to
an issue where a device model stub domain doesn't have maptrack entries.
Signed-off-by: Dmitry Fedorov <d.fedorov@tabit.pro>
Acked-by: Wei Liu <wl@xen.org>
While part of the original AMD64 spec, Long Mode Segment Limit was a feature
not picked up by Intel, and therefore didn't see much adoption in software.
AMD have finally dropped the feature from hardware, and allocated a CPUID bit
to indicate its absence.
Xen has never supported the feature for guests, even when running on capable
hardware, so advertise the feature's absence unilaterally.
There is nothing specifically wrong with exposing this bit to PV guests, but
the PV ABI doesn't include a working concept of MSR_EFER in the first place,
so exposing it to PV guests would be out-of-place.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
In do_domain_soft_reset(), a `libxl__domain_suspend_state' is used
without been properly initialised and disposed of. This lead do a
abort() in libxl due to the `dsps.qmp' state been used before been
initialised:
libxl__ev_qmp_send: Assertion `ev->state == qmp_state_disconnected || ev->state == qmp_state_connected' failed.
Once initialised, `dsps' also needs to be disposed of as the `qmp'
state might still be in the `Connected' state in the callback for
libxl__domain_suspend_device_model(). So this patch adds
libxl__domain_suspend_dispose() which can be called from the two
places where we need to dispose of `dsps'.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Tested-by: Olaf Hering <olaf@aepfle.de>
Introduce an option to allow selecting a behavior similar to the pre
Xen 4.15 one for accesses to MSRs not explicitly handled. Since commit
84e848fd7a and 322ec7c89f accesses to MSRs not explicitly
handled by Xen result in the injection of a #GP to the guest. This
is a behavior change since previously a #GP was only injected if
accessing the MSR on the real hardware would also trigger a #GP, or if
the attempted to be set bits wouldn't match the hardware values (for
PV). The reasons for not leaking hardware MSR values and injecting a
#GP are fully valid, so the solution proposed here should be
considered a temporary workaround until all the required MSRs are
properly handled.
This seems to be problematic for some guests, so introduce an option
to fallback to this kind of legacy behavior without leaking the
underlying MSR values to the guest.
When the option is set, for both PV and HVM don't inject a #GP to the
guest on MSR read if reading the underlying MSR doesn't result in a
#GP, do the same for writes and simply discard the value to be written
on that case.
Note that for guests restored or migrated from previous Xen versions
the option is enabled by default, in order to keep a compatible
MSR behavior. Such compatibility is done at the libxl layer, to avoid
higher-level toolstacks from having to know the details about this flag.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Just like all other object files - wherever *.o is mentioned, *.opic
also needs mentioning to yield consistent behavior. Otherwise make may
decide to (re)build the object before recursion into $(ACPI_PATH)/ (to
update $(DSDT_FILES-y) and ssdt_*.h) was actually finished.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
libxl_domain_resume() won't work correctly for the case it was called
due to a "xl save -c" command, i.e. to continue the suspended domain.
The information to do that is not saved in libxl__dm_resume_state for
non-HVM domains.
Fixes: 6298f0eb8f ("libxl: Re-introduce libxl__domain_resume")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wl@xen.org>
Various version of gcc, when compiling with -Og, complain:
libxl_dm.c: In function 'libxl__domain_get_device_model_uid':
libxl_dm.c:256:12: error: 'kill_by_uid' may be used uninitialized in this function [-Werror=maybe-uninitialized]
256 | if (kill_by_uid)
| ^
The logic is very tangled. Set kill_by_uid on every path.
No funcational change.
Requested-by: Ian Jackson <iwj@xenproject.org>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Not-acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Various version of gcc, when compiling with -Og, complain:
libxl_dm.c: In function ‘libxl__write_stub_dmargs’:
libxl_dm.c:2166:16: error: ‘dmargs’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
rc = libxl__xs_write_checked(gc, t, path, dmargs);
~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It isn't actually used while uninitialised, but only because of how the
is_linux_stubdom checks line up.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Fixes: 804fe75137 ("tools/libxl: pass libxl__domain_build_state to libxl__arch_domain_create")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Domains migrating or restoring should have viridian HVM param key in
the migration stream already and setting that twice results in Xen
returing -EEXIST on the second attempt later (during migration stream parsing)
in case the values don't match. That causes migration/restore operation
to fail at destination side.
That issue is now resurfaced by the latest commits (983524671 and 7e5cffcd1e)
extending default viridian feature set making the values from the previous
migration streams and those set at domain construction different.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Add CPUID/MSR enumeration details for Processor Trace. For now, we will only
support its use inside VMX operation. Fill in the vmtrace_available boolean
to activate the newly introduced common infrastructure for allocating trace
buffers.
For now, Processor Trace is going to be operated in Single Output mode behind
the guests back. Add the MSRs to struct vcpu_msrs, and set up the buffer
limit in vmx_init_ipt() as it is fixed for the lifetime of the domain.
Context switch the most of the MSRs in and out of vCPU context, but the main
control register needs to reside in the MSR load/save lists. Explicitly pull
the msrs pointer out into a local variable, because the optimiser cannot keep
it live across the memory clobbers in the MSR accesses.
Signed-off-by: Michał Leszczyński <michal.leszczynski@cert.pl>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
We're about to introduce support for Intel Processor Trace, but similar
functionality exists in other platforms.
Aspects of vmtrace can reasonably can be common, so start with
XEN_SYSCTL_PHYSCAP_vmtrace and plumb the signal from Xen all the way down into
`xl info`.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Pass bridge name to qemu as command line option
When starting qemu, set an environnement variable XEN_DOMAIN_ID,
to be used by qemu helper scripts
The only functional difference of using the br parameter is that the
bridge name gets passed to the QEMU script.
NetBSD doesn't have the ioctl to rename network interfaces implemented, and
thus cannot rename the interface from tapX to vifX.Y-emu. Only qemu knowns
the tap interface name, so we need to use the qemu script from qemu itself.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
NetBSD doesn't have setresuid(). introcuce libxl__setresuid(),
which on NetBSD assert() that it's never called (it should not be called when
dm restriction is off, and NetBSD doesn't support dm restriction at
this time).
On linux and FreeBSD it just calls setresuid().
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
NetBSD uses the same uuid library as FreeBSD. As this is in a
__FreeBSD__ || __NetBSD__ block, just drop the #ifdef __FreeBSD__
and dead code.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Don't assume tv_sec is a unsigned long, it is 64 bits on NetBSD 32 bits.
Use %jd and cast to (intmax_t) instead
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Switch NetBSD to QEMU_XEN.
All 3 versions of libxl__default_device_model() now return
LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN, so remove it and just set
b_info->device_model_version to LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN in
libxl__domain_build_info_setdefault().
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
If Viridian extensions are enabled, Windows wouldn't currently allow
a hotplugged vCPU to be brought up dynamically. We need to expose a special
bit to let the guest know we allow it. Hide it behind an option to stay
on the safe side regarding compatibility with existing guests but
nevertheless set the option on by default.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
TLFS 7.8.1 stipulates that "a virtual processor index must be less than
the maximum number of virtual processors per partition" that "can be obtained
through CPUID leaf 0x40000005". Furthermore, "Requirements for Implementing
the Microsoft Hypervisor Interface" defines that starting from Windows Server
2012, which allowed more than 64 CPUs to be brought up, this leaf can now
contain a value -1 basically assuming the hypervisor has no restriction while
0 (that we currently expose) means the default restriction is still present.
Along with the previous changes exposing ExProcessorMasks this allows a recent
Windows VM with Viridian extension enabled to have more than 64 vCPUs without
going into BSOD in some cases.
Since we didn't expose the leaf before and to keep CPUID data consistent for
incoming streams from previous Xen versions - let's keep it behind an option.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Use unsigned char variable, or cast to (unsigned char), for
tolower()/islower() and friends. Fix compiler error
array subscript has type 'char' [-Werror=char-subscripts]
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
While the lack of proper dependency tracking of #include-d files is
wider than just the libs/ subtree, dealing with the problem universally
there or in tools/Rules.mk is too much of a risk at this point in the
release cycle. Add the missing inclusion of $(DEPS_INCLUDE) only in the
specific Makefile-s, after having checked that their prior Makefile-s
had such includes.
Interestingly the $(DEPS_RM) use is present in tools/libs/libs.mk's
clean target, so doesn't need taking care of in individual Makefile-s.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Ian Jackson <iwj@xenproject.org>
This patch modifies libxlu_pci_parse_spec_string() to parse the new 'name'
parameter of PCI_SPEC_STRING detailed in the updated documention in
xl-pci-configuration(5) and populate the 'name' field of 'libxl_device_pci'.
If the 'name' field is non-NULL then both libxl_device_pci_add() and
libxl_device_pci_remove() will use it to look up the device BDF in
the list of assignable devices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and modify libxl_pci_bdf_assignable_add/remove/list() to make use of it.
libxl_pci_bdf_assignable_add() will store the name of the device in xenstore
if the field is specified (i.e. non-NULL) and libxl_pci_bdf_assignable_remove()
will remove devices specified only by name, looking up the BDF as necessary.
libxl_pci_bdf_assignable_list() will also populate the 'name' field if a name
was stored by libxl_pci_bdf_assignable_add().
NOTE: This patch also fixes whitespace in the declaration of 'libxl_device_pci'
in the IDL.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
There are only two call-sites. One always sets it to 0 (which is unnecessary
as the structure is already initialized to zero) and the other can simply set
the 'vdevfn' field directly (after proper structure initialization), avoiding
the need for a local variable.
A subsequent patch will also make use of pci_struct_fill() in a context
where 'vdevfn' may already have been set.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
When device is removed, backend domain (which may be a driver domain) is
responsible for removing backend entries from xenstore. But in case of
driver domain, it has no access to remove all of them - specifically the
directory named after frontend-id remains. This may accumulate enough to
exceed xenstore quote of the driver domain, breaking further devices.
Fix this by calling libxl__xs_path_cleanup() on the backend path from
libxl__device_destroy() in the toolstack domain too. Note
libxl__device_destroy() is called when the driver domain already removed
what it can (see device_destroy_be_watch_cb()->device_hotplug_done()).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wl@xen.org>
This patch reverts eight patches from staging.
The offending patch is the one that introduced libxl_pci_bdf (last one
in the list). The rest depend on that patch so they are also reverted.
8bf0fab142 "libxl / libxlu: support 'xl pci-attach/detach' by name"
e1141654c3 "docs/man: modify xl-pci-configuration(5) to add 'name' field to PCI_SPEC_STRING"
93c16ae47b "xl: support naming of assignable devices"
5ab684cb3e "libxl: introduce libxl_pci_bdf_assignable_add/remove/list/list_free(), ..."
66c2fbc6e8 "libxl: convert internal functions in libxl_pci.c..."
f73c5dd56d "docs/man: modify xl(1) in preparation for naming of assignable devices"
96ed6ff297 "libxlu: introduce xlu_pci_parse_spec_string()"
929f231140 "libxl: introduce 'libxl_pci_bdf' in the idl..."
Signed-off-by: Wei Liu <wl@xen.org>
This patch adds a 'name' field into the idl for 'libxl_device_pci' and
libxlu_pci_parse_spec_string() is modified to parse the new 'name'
parameter of PCI_SPEC_STRING detailed in the updated documention in
xl-pci-configuration(5).
If the 'name' field is non-NULL then both libxl_device_pci_add() and
libxl_device_pci_remove() will use it to look up the device BDF in
the list of assignable devices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
which support naming and use 'libxl_pci_bdf' rather than 'libxl_device_pci',
as replacements for libxl_device_pci_assignable_add/remove/list/list_free().
libxl_pci_bdf_assignable_add() takes a 'name' parameter which is stored in
xenstore and facilitates two addtional functions added by this patch:
libxl_pci_bdf_assignable_name2bdf() and libxl_pci_bdf_assignable_bdf2name().
Currently there are no callers of these two functions. They will be added in
a subsequent patch.
libxl_device_pci_assignable_add/remove/list/list_free() are left in place
for compatibility but are re-implemented in terms of the newly introduced
functions.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and use in 'libxl_device_pci'
This patch is preparatory work for restricting the type passed to functions
that only require BDF information, rather than passing a 'libxl_device_pci'
structure which is only partially filled. In this patch only the minimal
mechanical changes necessary to deal with the structural changes are made.
Subsequent patches will adjust the code to make better use of the new type.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
... rather than an open-coded equivalent.
This patch tidies up the is_pci_in_array() function, making it take a single
'libxl_device_pci' argument rather than separate domain, bus, device and
function arguments. The already-available COMPARE_PCI() macro can then be
used and it is also modified to return 'bool' rather than 'int'.
The patch also modifies libxl_pci_assignable() to use is_pci_in_array() rather
than a separate open-coded equivalent, and also modifies it to return a
'bool' rather than an 'int'.
NOTE: The COMPARE_PCI() macro is also fixed to include the 'domain' in its
comparison, which should always have been the case.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
... to be used by callers of libxl_device_pci_assignable_list().
Currently there is no API for callers of libxl_device_pci_assignable_list()
to free the list. The xl function pciassignable_list() calls
libxl_device_pci_dispose() on each element of the returned list, but
libxl_pci_assignable() in libxl_pci.c does not. Neither does the implementation
of libxl_device_pci_assignable_list() call libxl_device_pci_init().
This patch adds the new API function, makes sure it is used everywhere and
also modifies libxl_device_pci_assignable_list() to initialize list
entries rather than just zeroing them.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
A previous patch introduced libxl_device_pci_list_free() which should be used
by callers of libxl_device_pci_list() to properly dispose of the exported
'libxl_device_pci' types and the free the memory holding them. Whilst all
current callers do ensure the memory is freed, only the code in xl's
pcilist() function actually calls libxl_device_pci_dispose(). As it stands
this laxity does not lead to any memory leaks, but the simple addition of
.e.g. a 'string' into the idl definition of 'libxl_device_pci' would lead
to leaks.
This patch makes sure all callers of libxl_device_pci_list() can call
libxl_device_pci_list_free() by keeping copies of 'libxl_device_pci'
structures inline in 'pci_add_state' and 'pci_remove_state' (and also making
sure these are properly disposed at the end of the operations) rather
than keeping pointers to the structures returned by libxl_device_pci_list().
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Use of this function is a very inefficient way to check whether a device
has already been assigned.
This patch adds code that saves the domain id in xenstore at the point of
assignment, and removes it again when the device id de-assigned (or the
domain is destroyed). It is then straightforward to check whether a device
has been assigned by checking whether a device has a saved domain id.
NOTE: To facilitate the xenstore check it is necessary to move the
pci_info_xs_read() earlier in libxl_pci.c. To keep related functions
together, the rest of the pci_info_xs_XXX() functions are moved too.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
The code currently checks explicitly whether the device is already assigned,
but this is actually unnecessary as assigned devices do not form part of
the list returned by libxl_device_pci_assignable_list() and hence the
libxl_pci_assignable() test would have already failed.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
For the purposes of re-binding a device to its previous driver
libxl__device_pci_assignable_add() writes the driver path into xenstore.
This path is then read back in libxl__device_pci_assignable_remove().
The functions that support this writing to and reading from xenstore are
currently dedicated for this purpose and hence the node name 'driver_path'
is hard-coded. This patch generalizes these utility functions and passes
'driver_path' as an argument. Subsequent patches will invoke them to
access other nodes.
NOTE: Because functions will have a broader use (other than storing a
driver path in lieu of pciback) the base xenstore path is also
changed from '/libxl/pciback' to '/libxl/pci'.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
... to hold a pointer to the device.
There is already a 'pci' field in 'pci_add_state' so simply use that from
the start. This also allows the 'pci' (#3) argument to be dropped from
do_pci_add().
NOTE: This patch also changes the type of the 'pci_domid' field in
'pci_add_state' from 'int' to 'libxl_domid' which is more appropriate
given what the field is used for.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Both 'domid' and 'pci' are available in 'pci_remove_state' so there is no
need to also pass them as separate arguments.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Other parameters, such as 'msitranslate' and 'permissive' are dealt with
but 'rdm_policy' appears to be have been completely missed.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Currently libxl__device_pci_add_xenstore() is broken in that does not
update the domain's configuration for the first device added (which causes
creation of the overall backend area in xenstore). This can be easily observed
by running 'xl list -l' after adding a single device: the device will be
missing.
This patch fixes the problem and adds a DEBUG log line to allow easy
verification that the domain configuration is being modified. Also, the use
of libxl__device_generic_add() is dropped as it leads to a confusing situation
where only partial backend information is written under the xenstore
'/libxl' path. For LIBXL__DEVICE_KIND_PCI devices the only definitive
information in xenstore is under '/local/domain/0/backend' (the '0' being
hard-coded).
NOTE: This patch includes a whitespace in add_pcis_done().
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
... devices.
Currently there is an assumption built into libxl__device_list() that device
backends are fully enumarated under the '/libxl' path in xenstore. This is
not the case for PCI backend devices, which are only properly enumerated
under '/local/domain/0/backend'.
This patch adds a new get_path() method to libxl__device_type to allow a
backend implementation (such as PCI) to specify the xenstore path where
devices are enumerated and modifies libxl__device_list() to use this method
if it is available. Also, if the get_num() method is defined then the
from_xenstore() method expects to be passed the backend path without the device
number concatenated, so this issue is also rectified.
Having made libxl__device_list() work correctly, this patch removes the
open-coded libxl_pci_device_pci_list() in favour of an evaluation of the
LIBXL_DEFINE_DEVICE_LIST() macro. This has the side-effect of also defining
libxl_pci_device_pci_list_free() which will be used in subsequent patches.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Roger Pau Monne
Costin Lupu
Jan Beulich
Dmitry Fedorov
Andrew Cooper
Anthony PERARD
Juergen Gross
Olaf Hering
Igor Druzhinin
Michał Leszczyński
Manuel Bouyer
Paul Durrant
Marek Marczykowski-Górecki
Wei Liu