In the display protocol connector's id is named as unique-id. This patch renames
it in the libxl/xl code and uses XENDISPL_FIELD... definitions from the protocol
header.
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
ENODATA is not part of the standard set of errno values, so use
ENOENT instead. This fixes the build on FreeBSD.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
clang is not capable of building the x86 emulator test harness, so
disconnect it from the clang build until it can be fixed.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
SeaBIOS requires gcc and GNU ld in order to build, so allow setting
SEABIOSCC and SEABIOSLD by the caller when building in order to pass
the path to the compiler and linker that should be used when building
SeaBIOS.
Note that the LD32BIT-y variable was used by FreeBSD builds and is no
longer needed due to the ability to select the LD to use for SeaBIOS
builds, so remove it.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
For libxengnttab.map, introducing a new VERS* section must be matched with a
equivalent SONAME bump.
For libxencall.map, the hunk as presented would have been ok, if Xen 4.11
hadn't been released between xencall_buffers_never_fault() and xencall_fd()
being introduced. Given the timing of the release, xencall_fd() needs moving
into a new VERS_1.2 section.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
I have chosen to licence this utility as LGPL-v2.1-only, similar to
other LGPL elements of the Xen tools, because it may want to be moved
into or combined with osstest or some other project at some point in
the future, so it wants a licence compatible with osstest's AGPLv3+.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In order to support auditing of qemu depriv, my audit tool wants to
know the fd of a privcmd handle on which it can easily make
hypercalls. xencall provides such a handle, but has no cooked
facilities for making hypercalls. So I open a libxc handle. That
means I need to get the privcmd fd out of the libxc handle.
ISTM that it is best to do this by providing an interface to get the
underlying library handles for a libxc handle. This kind of interface
is quite common elsewhere and has not caused problems.
libxc is not a stable API so the downside risk of providing this
access is not significant.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
These functions are no longer defined or used anywhere. The
declarations should have been deleted when the definitions were.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
This patch is adding a way to enable/disable inguest pagefault
events. It introduces the xc_monitor_inguest_pagefault function
and adds the inguest_pagefault_disabled in the monitor structure.
This is needed by the introspection so it will only get gla
faults and not get spammed with other faults.
In p2m_mem_access_check() we emulate so no event will get sent.
Signed-off-by: Alexandru Isaila <aisaila@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xen-tools/libs.h currently contains a shared BUILD_BUG_ON() implementation and
is used by some tools. Extend this to include ARRAY_SIZE and clean up all the
opencoding.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This function is entirely internal to xenctrl stubs, and serves only to
convert the uuid string to an integer array (making 16 memory allocations as
it goes), while the C stubs turns the integer array back into a binary array.
Instead, pass the string all the way down into C, and have sscanf() unpack it
directly into a xen_domain_handle_t object.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
The new data lives in the .topo union, rather than being treated as a single
leaf in the basic union.
While adjusting cpuid_policy, pad .basic to CPUID_GUEST_NR_BASIC for the
benefit of people extending the number of leaves in the future.
Host data is scanned when filling in the raw policy, but Xen still discards
any toolstack settings for now.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This helper appears to have been introduced 10 years ago by c/s 5f14a87ceb
"x86, hvm: Guest CPUID configuration" and never had any users at all.
alloc_str() is actually an opencoded calloc(), and now only has a single
caller. Use calloc() directly and drop alloc_str().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
None of the called functions return any errors, so there's no point in
returning an int from xc_cpuid_policy.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A read-only check was introduced for XSA-142, commit ef6cb76026 ("libxl:
relax readonly check introduced by XSA-142 fix") added the passing of
the extra setting, but commit dab0539568 ("Introduce COLO mode and
refactor relevant function") dropped the passing of the setting again,
quite likely due to improper re-basing.
Restore the readonly= parameter to SCSI disks. For IDE disks this is
supposed to be rejected; add an assert. And there is a bare ad-hoc
disk drive string in libxl__build_device_model_args_new, which we also
update.
This is XSA-266.
Reported-by: Andrew Reimers <andrew.reimers@orionvm.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
The generated configurations are identical apart from, in some cases,
reordering of the id=%s element. So, overall, no functional change.
This is part of XSA-266.
Reported-by: Andrew Reimers <andrew.reimers@orionvm.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Use error code from libxl namespace, a plain -1 is not valid in this context.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A hypercall issued via the privcmd driver can very rarely return
-EFAULT even if the hypercall buffers are locked in memory. This
happens for hypercall buffers in user memory when the Linux kernel
is doing memory scans e.g. for page migration or compaction.
Retry the getpageframeinfo3 hypercall up to 2 times in case
-EFAULT is returned and the hypervisor might see invalid PTEs for
user hypercall buffers (which should be the case only if the kernel
doesn't offer a /dev/xen/hypercall node).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add a new function to query whether hypercall buffers are always safe
to access by the hypervisor or might result in EFAULT.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Instead of using anonymous memory for hypercall buffers which is then
locked into memory, use the hypercall buffer device of the Linux
privcmd driver if available.
This has the advantage of needing just a single mmap() for allocating
the buffer and page migration or compaction can't make the buffer
unaccessible for the hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The rationalisation of the Xs_ring interface in the xb library
allows to further reduce the unsafe calls withouth introducing
copies. This patch also contains some further code cleanups.
Signed-off-by: Marcello Seri <marcello.seri@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Since Ocaml 4.06.0, that made safe-string on by default, the compiler is
allowed to perform optimisations on immutable strings. They should no
longer be used as mutable buffers, and bytes should be used instead.
The C stubs for Xs_ring have been updated to use bytes, and the interface
rationalised mimicking the new Unix module in the standard library (the
implementation of Unix.write_substring uses unsafe_of_string in the exact same
way, and both the write implementations are using the bytes as an immutable
payload for the write).
Signed-off-by: Marcello Seri <marcello.seri@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Just like for HVM the feature set should be used for EBX output, while
EAX should be restricted to the low 16 bits and ECX/EDX should be zero.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Older gcc does not support #pragma GCC diagnostics, so use alternative
approach - change variable type to uint32_t (this code handle 32-bit
requests only anyway), which apparently also avoid gcc complaining about
this (otherwise correct) code.
Fixes 437e00fea0 "tools/kdd: mute spurious
gcc warning"
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
To combat GPZ SP4 "Speculative Store Bypass", Intel have extended their
speculative sidechannel mitigations specification as follows:
* A feature bit to indicate that Speculative Store Bypass Disable is
supported.
* A new bit in MSR_SPEC_CTRL which, when set, disables memory disambiguation
in the pipeline.
* A new bit in MSR_ARCH_CAPABILITIES, which will be set in future hardware,
indicating that the hardware is not susceptible to Speculative Store Bypass
sidechannels.
For contemporary processors, this interface will be implemented via a
microcode update.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The exact value of cpu_khz can only be obtained via 'xl dmesg', and
therefore can be lost after some time. 'xl info' truncates the value to
full MHz. Adjust the output to show the full khz value.
This helps the host admin to track how a host has calibrated itself. The
value of cpu_khz is used during live migration for the decision if
access to TSC should be emualted.
Commit eb5277a30e ("bitkeeper revision 1.959.1.4
(40d04a87acOb29u-5Y5OxMhHvP2x9g)" gives no hint why cpu_mhz instead of
cpu_khz was chosen.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
CC xenctrl_stubs.o
xenctrl_stubs.c: In function 'failwith_xc':
xenctrl_stubs.c:65:17: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
"%d: %s: %s", error->code,
^
xenctrl_stubs.c:64:4: note: 'snprintf' output 6 or more bytes (assuming 1029) into a destination of size 1028
snprintf(error_str, sizeof(error_str),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%d: %s: %s", error->code,
~~~~~~~~~~~~~~~~~~~~~~~~~~
xc_error_code_to_desc(error->code),
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
error->message);
~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[8]: *** [/build/xen-git/src/xen/tools/ocaml/libs/xc/../../Makefile.rules:37: xenctrl_stubs.o] Error 1
m
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
New versions of iasl have introduced improved C file generation, as
reported in the changelog:
iASL: Enhanced the -tc option (which creates an AML hex file in C,
suitable for import into a firmware project):
1) Create a unique name for the table, to simplify use of multiple
SSDTs.
2) Add a protection #ifdef in the file, similar to a .h header file.
The net effect of that on generated files is:
-unsigned char AmlCode[] =
+#ifndef __SSDT_S4_HEX__
+#define __SSDT_S4_HEX__
+
+unsigned char ssdt_s4_aml_code[] =
The above example is from ssdt_s4.asl.
Fix the build with newer versions of iasl by stripping the '_aml_code'
suffix from the variable name on generated files.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
A user may choose to set his/her own PKG_CONFIG_PATH, which is useful in the
case of cross-compiling. We don't want to completely override the
PKG_CONFIG_PATH, just add to it.
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@dornerworks.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
PVH guests with 4GB of RAM or more get a memory map like the
following:
0x00000000000000 - 0x000000fee00000 RAM
0x000000fee00000 - 0x00000100000000 RESERVED
0x000000fc009000 - 0x000000fc009040 ACPI
0x000000fc000000 - 0x000000fc001000 ACPI
0x000000fc001000 - 0x000000fc009000 ACPI
0x00000100000000 - 0x000001fb200400 RAM
This is wrong because ACPI regions overlap with RAM regions. The cause
of this issue is not setting a big enough MMIO hole and marking the
whole MMIO hole as reserved, when it actually contains several pieces:
- local APIC page.
- ACPI tables.
- HVM special pages.
Of those items only HVM special pages need to be marked as reserved in
order to advise the guest against using them for example for memory
hotplug.
After the fix the layout reported for the same guest is:
0x00000000000000 - 0x000000fc000000 RAM
0x000000feff8000 - 0x000000ff000000 RESERVED
0x000000fc009000 - 0x000000fc009040 ACPI
0x000000fc000000 - 0x000000fc001000 ACPI
0x000000fc001000 - 0x000000fc009000 ACPI
0x00000100000000 - 0x000001fe000400 RAM
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently building the shim will modify shim.config in case some config
option was added or modified in the hypervisor.
Avoid that by copying shim.config to an intermediate file instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Current interface to the gntdev in FreeBSD is wrong, and mostly worked
out of luck before the PTI FreeBSD fixes, when kernel and user-space
where sharing the same page tables.
On FreeBSD ioctls have the size of the passed struct encoded in the ioctl
number, because the generic ioctl handler in the OS takes care of
copying the data from user-space to kernel space, and then calls the
device specific ioctl handler. Thus using ioctl structs with variable
sizes is not possible.
The fix is to turn the array of structs at the end of
ioctl_gntdev_alloc_gref and ioctl_gntdev_map_grant_ref into pointers,
that can be properly accessed from the kernel gntdev driver using the
copyin/copyout functions. Note that this is exactly how it's done for
the privcmd driver.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
qemu upstream uses git submodules. git archive does not work with git
submodules (and could not work properly with them, because this is one
of the many things it is inherently impossible to do correctly with
git submodules).
qemu upstream have worked around this by providing a rather scary
shell script which attempts to do roughly the right thing. It's close
enough that we can use it with only minor precautions.
Unfortunately this does mean that `mktarball' now executes the qemu
source code it was using, rather than merely shuffling it about, as it
did previously. I think this is a less bad ill than copying (and,
effectively, forking) the scary script.
CC: Wei Liu <wei.liu2@citrix.com>
CC: George Dunlap <george.dunlap@eu.citrix.com>
CC: Juergen Gross <jgross@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
c/s 74fd984ae "tools/libxl: Drop xc_domain_configuration_t from
libxl__domain_build_state" removed state->config completely but missed
some conversion libxl_arm.c.
Furthermore, not all the fields of xc_domain_configuration_t have a
corresponding field in libxl_domain_build_info. This is the case of
clock_frequency. As the field should not be exposed to the user, add a
corresponding field in libxl__domain_build_state. This require some
modification in the prototype of libxl__domain_make in order to have the
state.
For all the other fields, use the up-to-date version in
libxl_domain_build_info.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Commit 4a5733771e ("libxl: put RSDP for PVH guest near 4GB") breaks
pre-4.17 Linux guests since they do not use start_info's rsdp_paddr
pointer and instread scan BIOS memory for RSDP signature.
Introduce XENFEAT_linux_rsdp_unrestricted feature flag that indicates
whether the guest can handle RSDP at locations pointed to by
rsdp_paddr.
Since only Linux PVH guests suffer from this problem (BSD has always
relied on rsdp_paddr) we check this flag just for those guests. If the
flag is not set we place RSDP in BIOS, as before.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Oleksandr Grytsov
Roger Pau Monne
Andrew Cooper
Ian Jackson
Alexandru Isaila
Olaf Hering
Juergen Gross
Marcello Seri
Jan Beulich
Marek Marczykowski-Górecki
John Thomson
Stewart Hildebrand
Anthony PERARD
Julien Grall
Boris Ostrovsky
Wei Liu