Mixed throughout libxc are uint32_t, int, and domid_t for domid parameters.
With a signed type, and an explicitly 16-bit type, it is exceedingly difficult
to construct an INVALID_DOMID constant which works with all of them. (The
main problem being that domid_t gets unconditionally zero extended when
promoted to int for arithmatic.)
Libxl uses uint32_t consistently everywhere, so alter libxc to match.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@linaro.org>
[ wei: fix compilation error in libxl ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
As recommended in http://www.gnu.org/licenses/gpl-howto.en.html.
This is the result of:
$ git grep -El Mass\|Temple\|Franklin | xargs ./fsf.pl
Where fsf.pl is:
#!/usr/bin/perl -w -pi.bak -0777
my $repl = 'If not, see <http://www.gnu.org/licenses/>.';
my $br = qr/(?:\s*\n\s*(?:[\*\#]|\/\/|\.\\" )?\s*|\s+)/;
my $inwt = qr/[Ii]f${br}not,${br}write${br}(?:to${br})?the${br}Free${br}Software${br}Foundation,(?:${br}Inc\.,)?/;
my $mass = qr/675${br}Mass${br}Ave,?${br}Cambridge,?${br}MA${br}02139,?${br}USA,?\.?/;
my $franklin = qr/51${br}Franklin${br}St(?:reet)?(?:,${br}| - )Fifth${br}Floor,?${br}Boston,?${br}MA,?${br}02110-1301,?${br}USA,?\.?/;
my $temple = qr/59${br}Temple${br}Place(?:,${br}| - )Suite${br}330,?${br}Boston,?${br}MA,?${br}021110?-1307,?${br}USA,?\.?/;
s|$inwt$br$mass|$repl|m;
s|$inwt$br$franklin|$repl|m;
s|$inwt$br$temple|$repl|m;
The only remaining mentions of these addresses are in COPYING files which I
haven't touched.
Some of the changed files are imports from elsewhere, however
filtering them out is tricky, I think it is tolerable to have these
files be modified here and then perhaps reverted on the next sync,
since it's only 1-2 lines and obvious what is going on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
The code to initialize the grant table in libxc uses
xc_domain_maximum_gpfn() + 1 to get a guest pfn for mapping the grant
frame and to initialize it.
This solution has two major issues:
- The check of the return of xc_domain_maximum_gpfn is buggy because
xen_pfn_t is unsigned and in case of an error -ERRNO is returned.
Which is never catch with ( pfn <= 0 ).
- The guest memory layout maybe filled up to the end, i.e
xc_domain_maximum_gpfn() + 1 gives either 0 or an invalid PFN due to
hardware limitation.
Futhermore, on ARM, xc_domain_maximum_gpfn() is not implemented and
return -ENOSYS. This will make libxc to use always the same PFN which
may colapse with an already mapped region (see xen/include/public/arch-arm.h
for the layout).
This patch only address the problem for ARM, the x86 version use the same
behavior (ie xc_domain_maximum_gpfn() + 1), as I'm not familiar with Xen x86.
A new function xc_core_arch_get_scratch_gpfn is introduced to be able to
choose the gpfn per architecture.
For the ARM version, we use the GUEST_GNTTAB_GUEST which is the base of
the region by the guest to map the grant table. At the build time,
nothing is mapped there.
At the same time correctly check the return of xc_domain_maximum_gpfn
for x86.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The emacs variable to set the C style from a local variable block is
c-file-style, not c-set-style.
Signed-off-by: David Vrabel <david.vrabel@citrix.com
Removed support from libxc and mini-os.
This also took me under xen/include/public via various symlinks.
Dropped tools/debugger/xenitp entirely, it was described upon commit
as:
"Xenitp is a low-level debugger for ia64" and doesn't appear to be
linked into the build anywhere.
99 files changed, 14 insertions(+), 32361 deletions(-)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Introduce an empty implementation of the arch specific ARM functions in
xc_core_arm.c and xc_core_arm.h; define barriers on ARM.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
# User Ian Campbell <ian.campbell@citrix.com>
# Date 1282671421 -3600
# Node ID d1dd29a470ef1b9d2c77478a123326036dfe90bb
# Parent d7a4adad9c328decbd384d87b23001aea8951b86
tools/libxc, tools/libelf: Relicense under LGPL v2.1
Relicense these two libraries under LGPL v2.1 only except where
individual files already included the "or later" provision.
Copyright holders have been contacted by Stephen Spector and have all
agreed this change.
Removed tools/libxc/ia64/aclinux.h since it appeared to be
unused. There is a separate, more up to date, copy in
xen/include/acpi/platform/aclinux.h which does appear to be used.
Clarify the license of MiniOS privcmd.h under the same terms as other
tools/include/xen-sys headers.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stephen Spector <stephen.spector@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch eliminate the global variables in libxenctrl (used for
logging and error reporting).
Instead the information which was in the global variables is now in a
new xc_interface* opaque structure, which xc_interface open returns
instead of the raw file descriptor; furthermore, logging is done via
xentoollog.
There are three new parameters to xc_interface_open to control the
logging, but existing callers can just pass "0" for all three to get
the old behaviour.
All libxc callers have been adjusted accordingly.
Also update QEMU_TAG for corresponding qemu change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch firstly change the xc_core_arch_map_p2m() to map the p2m to
be writable, then it export this function.
One notice for this patch is, caller should make sure change the p2m
in flight will not cause trouble.
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
This patch allows core-dumping to work on a cross-bit host/guest
configuration, whereas previously that was not supported. It supports
both PV and FV guests. The core file format generated by the host,
needs to match that of the guest, so an alignment issue is addressed,
along with the p2m frame list handling being done according to the
guest size.
Signed-off-by: Bruce Rogers <brogers@novell.com>
On ia64 trying to map a foreign domain page which isn't allocated
cause annoying warning message. xm dump-core results in too many
warnings. With this hook, ia64 dump-core can suprress warning.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
added PFN-GMFN table for non-auto translated physmap
added PFN table for auto translated physmap.
HVM domain support.
IA64 support
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Use the guest's own p2m table instead of xc_get_pfn_list(), which
cannot handle PFNs with no MFN.
Dump a zeroed page for PFNs with no MFN.
Clearly deprecate xc_get_pfn_list().
Do not include a P2M table with HVM domains.
Refuse to dump HVM until we can map its pages with PFNs.
Signed-off-by: John Levon <john.levon@sun.com>
Andrew Cooper
Ian Campbell
Julien Grall
David Vrabel
Stefano Stabellini
Keir Fraser
kfraser@localhost.localdomain
Hollis Blanchard
Keir Fraser