This patch supports basic gfx passthrough on xen side:
- add a VGA type for gfx passthrough, and get the size of VGA bios
of passthrouged gfx in hvmloader
- add a config option 'gfx_passthru' for gfx passthrough
Signed-off-by: Ben Lin <ben.y.lin@intel.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
If boot="ndc", rombios cannot try to boot next device.
Because rombios jump to the boot vector without pushing return
address, gPXE code and so on cannot return if it fail to boot.
Signed-off-by: Akio Takebe <takebe_akio@jp.fujitsu.com>
This patch adds the ACPI fixed hardware power button for HVM.
It enables a graceful shutdown of a guest OS by direction of Dom0.
(if a proper action for the power button is set inside the guest)
usage:
xm trigger <Domain> power
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
Now there are two control registers plus one register for
each of the 32 PHP slots. A total of 34 registers. Accordingly the
ioport space required has expanded by from 3 to 34 bytes.
Signed-off-by: Simon Horman <horms@verge.net.au>
hvmloader acpi: Use If and Else instead of Switch
Signed-off-by: Simon Horman <horms@verge.net.au>
The bcc compiler generates wrong stack pointer offset of a local
variable within ASM code if another local variable is declared
later.
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
Signed-off-by: Akio Takebe <takebe_akio@jp.fujitsu.com>
The pointer to PMM function arguments must be flattened for protected
mode with zero-based segments.
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
This gets rid of shenanigans with relocating the jump table around the
place.
Also clean up bios_info table while we are updating it.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Since it is a build prerequisite (in some cases) simply fail the build
if it is not found when it turns out to be required. Just as we would
for any other tool-chain prereq.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
The rombios always becomes read-only after using 32bit gateway.
That is not handy for using the gateway.
Signed-off-by: Kouya Shimura <kouya@jp.fujitsu.com>
* enables linear framebuffer and VBE 3.0 extensions.
* add a number of new resolutions, up to 2560x1600, and including
* widescreen modes common to modern displays.
* Introduce configurable video ram size through the "videoram" config
* file option, shrinking default video ram used to 4 Megs (thus
* eliminating 4 wasted megs/VM that have been the case until now), but
* allowing users to specify up to 16 Megs of vram, to support the
* extreme high resolutions such as 2560x1600x32.
Signed-off-by: Trolle Selander <trolle.selander@eu.citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
without deferring the test execution of CC. This avoids extra
executions of CC every time CFLAGS is expanded.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
dev_memsize ends up 0 when it shouldn't be on 16G boundary conditions.
Signed-off-by: Bill Rieske <brieske@novell.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This has finally bugged me enough to do something about it:
make prints `***' when it stops due to an error. With make -j, and/or
with automated build systems, this error marker can be in the middle
of a large logfile. It is useful to be able to search for it.
Therefore change occurrences of `*' to `=' for information and warning
messages. `***' is reserved for cases where the build stops.
A corresponding change is being applied to qemu-xen-unstable.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
If you use -MMD -MF then the correct .o filename is written to the
.*.d file as the compiler driver arranges everything. This was done
in 19010:275abe1c5d24 for the hypervisor.
In this patch we do the same elsewhere in the xen-unstable tree,
particularly tools/. Specifically:
* Change tools/Rules.mk to add -MMD -MF ... to CFLAGS and set DEPS.
* Remove -Wp,-MD... from every other Makefile
* Remove setting of DEPS from every other Makefile
* Ensure that every Makefile says -include $(DEPS)
* Ensure that every Makefile's clean target removes $(DEPS)
Some Makefiles were already halfway there, but often for a different
variable name eg PROG_DEP. The variable name is now standardised in
Rules.mk as DEPS.
I have done a test build with this change, on Debian etch.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
To make memory management easier in hvmloader, defer building a
generic E820 map until the end of hvmloader bootstrap.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
hvm_info_table to describe memory parameters in a simpler form from
domain builder to hvmloader.
Also move reserved special page mappings immediately below the 4GB
boundary.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
I have copied the tarballs that the xen-unstable build downloads to
xenbits.xensource.com (which also hosts our hg and git). This patch
changes the download URLs to use that location.
That way the build will depend on only one external machine, under one
administration, rather than many. Also it means that the build won't
break if these sites become permanently unavailable or are rearranged
and we don't run a risk of having to panic and beg if a file should go
missing.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
In DSDT, reserve the IO port ranges: [0x10c0, 0x10c2] and [0xb044,
0xb047] that are used by the virtual PCI hotplug.
Or else, for a hotplugged-in device, the port IO BAR assigned by guest
OS may conflict with the ranges here.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Keir Fraser