sysconfig files are not mandatory.
Adjust xen-init-dom0.service to handle a missing sysconfig file by
prepending a dash to the to-be-sourced filename.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
sysconfig files are not mandatory.
Adjust xenconsoled.service to handle a missing sysconfig file by
prepending a dash to the to-be-sourced filename.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
NetBSD doens't need xenbackendd with xl toolstack so don't build it.
Remove now unused xenbackendd directory/files, and remaining references
in the hotplug scripts.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
[Also clean up stale comments in the Linux xencommons script]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Currently the arguments for xenwatchdogd are hardcoded with 15s
keep-alive interval and 30s timeout.
It is not possible to tweak these values via
/etc/systemd/system/xen-watchdog.service.d/*.conf because ExecStart
can not be replaced. The only option would be a private copy
/etc/systemd/system/xen-watchdog.service, which may get out of sync
with the Xen provided xen-watchdog.service.
Adjust the service file to recognize XENWATCHDOGD_ARGS= in a
private unit configuration file.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wl@xen.org>
Copy temp files used to add/remove dhcpd configurations to avoid
replacing potential symlinks.
If dhcp.conf is a symlink pointing to dhcp.conf.real, using 'mv'
creates a new file dhcp.conf where cp will actually modify
dhcp.conf.real instead of replacing the symlink with a real
file.
Using 'cp' prevents some mistakes where the user will actually
continue to modify dhcp.conf.real where it would not be the one
used anymore.
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Wei Liu <wl@xen.org>
Newer versions of the ISC dhcp server expect the dhcpd.conf file
to be located at /etc/dhcp directory.
Also, some distributions and Yocto based ones have these installation
paths by default: /etc/init.d/{isc-dhcp-server,dhcp-server} and
/etc/default/dhcp-server.
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Wei Liu <wl@xen.org>
Setting the hostname is failing because the "$XENBUS_PATH/domain"
doesn't exist anymore. To fix this we set it to dom$domid
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Wei Liu <wl@xen.org>
We're not after any "fall-through" behavior here. Replace the constructs
with ones understood by all conforming shells, including older bash
(problem observed with 3.1.51(1)).
Fixes: b51715f02b ("tools/hotplug/Linux: remove code duplication in vif-bridge")
Fixes: 3683290fc0 ("tools/hotplug: only attempt to call 'ip route' if there is valid command")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Wei Liu <wl@xen.org>
configuration is not parsed by libxl so there is no reason for the hotplug
script to exist
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
...and also inform the frontend.
The set_mtu() function in xen-network-common.sh currently sets the backend
vif MTU to match that of the bridge.
A prior patch added code into libxl such that a tools-configured 'mtu' value
may be present in the xenstore backend area. If the node is present in
xenstore then it should be authoritative. Hence set_mtu() is modified to only
read the MTU of the bridge if it is not present.
The function is also modified to write whatever value it applies to the
backend vif into the xenstore frontend area where is may then be used to
configure the frontend network stack.
NOTE: There is also a small modification replacing '$mtu' with '${mtu}'
for style consistency.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
The 'add' and 'online' cases do exactly the same thing so have 'add' simply
fall through to 'online'.
NOTE: This patch also adds in the missing 'remove' case, which falls though
to 'offline'. (The former is passed for 'tap' devices, the latter for
'vif' devices).
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
This patch adds a remove_from_bridge() function into xen-network-common.sh
to partner with the existing add_to_bridge() function. The vif-bridge
script is then modified to use it.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Remove duplication of 'ip link set dev'. It is perfectly fine to call it
even if the device has already been added to the bridge.
NOTE: This patch also adds code to write a debug log entry if the device
was already on the bridge.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
While commit b72682c602 ("scripts: Use stat to check lock claim")
validly indicates that stat has gained support for the special "-"
command line option in 2009, we should still try to avoid breaking being
able to run on even older distros. As it has been determined, contary to
the comment in the script using /dev/stdin (/proc/self/fd/$_lockfd) is
fine here, as Linux specially treats these /proc inodes.
Suggested-by: Ian Jackson <ian.jackson@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Release-acked-by: Paul Durrant <paul@xen.org>
Replace the perl locking check with stat(1). Stat is able to fstat
stdin (file descriptor 0) when passed '-' as an argument. This is now
used to check $_lockfd. stat(1) support for '-' was introduced to
coreutils in 2009.
After A releases its lock, script B will return from flock and execute
stat. Since the lockfile has been removed by A, stat prints an error to
stderr and exits non-zero. Redirect stderr to /dev/null to avoid
filling /var/log/xen/xen-hotplug.log with "No such file or directory"
messages.
Placing the stat call inside the "if" condition ensures we only check
the stat output when the command completed successfully.
This change removes the only runtime dependency of the xen toolstack on
perl.
Suggested-by: Ian Jackson <ian.jackson@citrix.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Replace two stray tabs with spaces to make the file whitespace
consistent.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Wei Liu <wl@xen.org>
Newer distros like CentOS 8 do not have brctl available. As such, we
can't use it to configure networking anymore.
This patch will fall back to 'ip' or 'bridge' commands if brctl is not
available in the working PATH.
This would be a likely backport candidate to any version expected to be
built on CentOS 8 etc.
Signed-off-by: Steven Haigh <netwiz@crc.id.au>
Acked-by: Wei Liu <wl@xen.org>
The vif-route script should only call 'ip route' when 'ipcmd' has been
set, otherwise it will fail due to an incorrect command string.
This patch also adds routes for 'tap' (i.e. emulated) devices as well as
'vif' (i.e. PV) devices. Empirically offline/online commands relate to
'vif' devices, and add/remove commands relate to 'tap' devices. However,
this patch treats them equally and uses ${type_if} to distinguish. By
adding cases for add/remove the command list becomes exhaustive and hence
'ipcmd' is guaranteed to be set.
Routes for 'tap' and 'vif' devices are distinguished by a route metric.
Emulated devices are used by HVM guests until they are unplugged, at which
point the PV device becomes active. Thus 'tap' devices should get a higher
priority (i.e. lower numbered) metric than 'vif' devices.
There is also one small whitespace fix.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Juergen Gross <jgross@suse.com>
These directories ought not to be even world-readable. If this script
for some reason runs with a lax umask they might be created
overly-writeable. Avoid any such bug by setting the mode explicitly.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
It is useful to have a single `xen' facility (in the LSB Provides
namespace). That allows other facilities to specify that they should
go after `xen' without needing to know the implementation details.
This service name is already Provide'd by the (fairly different) init
scripts used in Debian.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Since udev is no longer used to call hotplug scripts (neither in dom0
nor driver domain), this scripts is no longer referenced anywhere. libxl
(xl devd or else) has own cleanup code.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Fixing top-level "make uninstall":
tools/tests/x86_emulator is missing an uninstall target, which causes
failure. Trivial to add one since it installs nothing, so do that.
Linux hotplug uninstall returns success but doesn't actually remove what
it installed. The Makefile variables are obfuscating incorrect logic, so
strip them out and match existing code for xen-watchdog which does work.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
iptables has a system-wide lock on the xtables. Strangely though, in
the case of two concurrent invocations, the default is for the
instance not grabbing the lock to exit out rather than waiting for it.
This means that when starting a large number of guests in parallel,
many will fail out with messages like this:
2017-05-10 11:45:40 UTC libxl: error: libxl_exec.c:118: libxl_report_child_exitstatus: /etc/xen/scripts/vif-bridge remove [18767] exited with error status 4
2017-05-10 11:50:52 UTC libxl: error: libxl_exec.c:118: libxl_report_child_exitstatus: /etc/xen/scripts/vif-bridge offline [1554] exited with error status 4
In order to instruct iptables to wait for the lock, you have to
specify '-w'. Unfortunately, not all versions of iptables have the
'-w' option, so on first invocation check to see if it accepts the -w
command.
Reported-by: Antony Saba <awsaba@gmail.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
As xenstored now is always starting with an empty tdb data base there
is no need any longer to remove the file before starting xenstored.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a parameter to xencommons configuration file for specifying the
maximum memory size of the xenstore domain.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add configuration entries to sysconfig.xencommons for selection of the
xenstore type (domain or daemon) and start the selected xenstore
service via a script called from sysvinit or systemd.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Instead of trying to read xenstore via xenstore-read use the pidfile
of xenstored for the test whether xenstored is running. This prepares
support of xenstore domain, as trying to read xenstore will block
for ever in case xenstore domain is started after trying to read.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In order to prepare starting a xenstore domain split out the starting
of the xenstore daemon from the xencommons script into a dedicated
launch-xenstore script.
A rerun of autogen.sh is required.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On a system with systemd the xenstore sockets are created via systemd.
Remove the related configuration files in order to be able to decide
at runtime whether the sockets should be created or not. This will
enable Xen to start xenstore either via a daemon or via a stub domain.
As the xenstore domain start program will exit after it has done its
job prepare the same behaviour to be tolerated by systemd for the
xenstore daemon by specifying the appropriate flags in the service
file.
A rerun of autogen.sh is required.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: David Scott <dave@recoil.org>
Having DefaultDependencies=no means it can be started before / is
remounted read-write, which will result in various failures (to start
with opening the log).
Since "libxl: trigger attach events for devices attached before xl devd
startup" it is no longer important to start it as early as possible,
because it will process devices created before its startup.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Store various PID files under XEN_RUN_DIR. Note that this change the
default location from /var/run to /var/run/xen.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
A dedicated Xen driver domain init service starts "xl devd" in domU. But
currently, it is only supplied in the form of a SysV init script, which
systemd users run through a backward compatiblity wrapper automatically
generated by systemd-sysv-generator. This patch adds a (naturally more
lightweight) native systemd unit to be used instead.
The xendriverdomain service is only relevant to domU, but should not run
in dom0. Therefore, the systemd unit uses "ConditionVirtualization=xen",
which evaluates to true in domU and (since systemd version 214, released
on 2014-06-11) to false in dom0. Users or distributors who need to be
compatible with even older systemd versions, but still want to prevent
"xl devd" startup in dom0, could add the following line in [Service]:
ExecStartPre=/bin/sh -c "! grep -q control_d /proc/xen/capabilities"
(Please rerun autogen.sh after applying this patch)
Signed-off-by: Rusty Bird <rustybird@openmailbox.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: rerun autogen.sh ]
At the moment, the xendomains init script will only create a lockfile
if when started, it actually does something -- either tries to restore
a previously saved domain as a result of XENDOMAINS_RESTORE, or tries
to create a domain as a result of XENDOMAINS_AUTO.
RedHat-based SYSV init systems try to only call "${SERVICE} shutdown"
on systems which actually have an actively running component; and they
use the existence of /var/lock/subsys/${SERVICE} to determine which
systems are running.
This means that at the moment, on RedHat-based SYSV systems (such as
CentOS 6), if you enable xendomains, and have XENDOMAINS_RESTORE set
to "true", but don't happen to start a VM, then your running VMs will
not be suspended on shutdown.
Since the lockfile doesn't really have any other effect than to
prevent duplicate starting, just create it unconditionally every time
we start the xendomains script.
The other option would have been to touch the lockfile if
XENDOMAINS_RESTORE was true regardless of whether there were any
domains to be restored. But this would mean that if you started with
the xendomains script active but XENDOMAINS_RESTORE set to "false",
and then changed it to "true", then xendomains would still not run the
next time you shut down. This seems to me to violate the principle of
least surprise.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Commit c996572 changed the LOCKFILE path from a check between two
hardcoded paths (/var/lock/subsys/ or /var/lock) to using the
XEN_LOCK_DIR variable designated at configure time. Since
XEN_LOCK_DIR doesn't (and shouldn't) have the 'subsys' postfix, this
effectively moves all the lock files by default to /var/lock instead.
Unfortunately, this breaks xendomains on RedHat-based SYSV init
systems. RedHat-based SYSV init systems try to only call "${SERVICE}
shutdown" on systems which actually have an actively running
component; and they use the existence of /var/lock/subsys/${SERVICE}
to determine which systems are running.
Changing XEN_LOCK_DIR to /var/lock/subsys is not suitable, as only
system services like xendomains should create lockfiles there; other
locks (such as the console locks) should be created in /var/lock
instead.
Instead, re-instate the check for the subsys/ subdirectory of the lock
directory in the xendomains script.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Most implementations of the sleep command only take integers. GNU
coreutils has a GNU extension to allow any floating point number to be
passed but we shouldn't depend on that.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
The original same_vm check has two bugs. When stubdom is in use because
it relies on numeric domid to check if two domains are in fact the same
one. Another one is that the check would fail when two stubdoms are
checked against each other.
The first bug is fixed by using uuid to identify a domain. The second
bug is fixed by comparing the domains two stubdoms serve.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
COLO and Remus net buffer support both depend on the availability of
libnl. Use a generic name.
No functional changes.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Change block-common.sh on Linux to write physical-device-path with the
path of the device node, in addition to physical-device with its
major:minor numbers.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: George Dunlap <george.dunlap@citrix.com>
Testing the hotplug external script path at the moment involves
actually setting up one of the alternate datapaths (blktap, iscsi,
&c). Simplify testing by making a script which does a simple loopback,
but still has a target that can't be used directly.
To use:
script=block-dummy,vdev=xvda,target=dummy:<file>
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: George Dunlap <george.dunlap@citrix.com>
Olaf Hering