xen-project/xen
1
0 Fork 1
mirror of https://github.com/xen-project/xen.git synced 2026-10-29 18:50:05 +01:00
Code Issues Activity
Files
2fac4e3ea3bb301f87426e24b9dfd765c22c9cf9
xen/docs/misc/arm/device-tree/booting.txt
T
Luca Fancellu 60649d443d arm/efi: Introduce xen,uefi-cfg-load DT property 
Introduce the xen,uefi-cfg-load DT property of /chosen
node for ARM whose presence decide whether to force
the load of the UEFI Xen configuration file.

The logic is that if any multiboot,module is found in
the DT, then the xen,uefi-cfg-load property is used to see
if the UEFI Xen configuration file is needed.

Modify a comment in efi_arch_use_config_file, removing
the part that states "dom0 required" because it's not
true anymore with this commit.

Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
2021-10-01 16:26:04 -07:00

321 lines
9.5 KiB
Plaintext
Raw Blame History

Dom0 kernel and ramdisk modules
================================
Xen is passed the dom0 kernel and initrd via a reference in the /chosen
node of the device tree.
Each node contains the following properties:
- compatible
Must always include at least the generic compatiblity string:
"multiboot,module"
Optionally a more specific compatible string may be used in
addition to the above. One of:
- "multiboot,kernel" -- the dom0 kernel
- "multiboot,ramdisk" -- the dom0 ramdisk
- "xen,xsm-policy" -- XSM policy blob
It is normally recommended to include a more specific
compatible string (if one applies) in addition to the generic
string (which must always be present).
Xen will assume that the first module which lacks a more
specific compatible string is a "multiboot,kernel".
Xen will examine each module, starting from the second
module that lacks a specific compatible string. Xen will
check each such module for the XSM Magic number:
- For a module which has the XSM Magic number: it will be
treated by Xen as if its compatible string was
"xen,xsm-policy";
- For a module which does not have the XSM Magic: the second
module lacking a compatible string will be treated by Xen as
if its compatible string was "multiboot,ramdisk"; for the
third and subsequent modules which lack a specific
compatible string, Xen will not apply any special treatment.
This means if the ramdisk module is present and does not have the
compatible string "multiboot,ramdisk", then it must always be the
second module.
Note: This XSM Magic detection behavior was introduced by Xen 4.7.
Xen 4.6 (and downwards) still requires the XSM module to have the
compatible string "xen,xsm-policy".
Xen 4.4 supported a different set of legacy compatible strings
which remain supported such that systems supporting both 4.4
and later can use a single DTB.
- "xen,multiboot-module" equivalent to "multiboot,module"
- "xen,linux-zimage" equivalent to "multiboot,kernel"
- "xen,linux-initrd" equivalent to "multiboot,ramdisk"
For compatibility with Xen 4.4 the more specific "xen,linux-*"
names are non-optional and must be included.
- reg
Specifies the physical address of the module in RAM and the
length of the module.
- bootargs (optional)
Command line associated with this module. See below for the
priority of this field vs. other mechanisms of specifying the
bootargs for the kernel.
Examples
========
A boot module of unspecified type:
module@0xc0000000 {
compatible = "multiboot,module";
reg = <0xc0000000 0x1234>;
bootargs = "...";
};
A boot module containing a ramdisk:
module@0xd0000000 {
compatible = "multiboot,ramdisk", "multiboot,module";
reg = <0xd0000000 0x5678>;
};
The previous examples are compatible with Xen 4.5+ only.
To be compatible with Xen 4.4 as well use the legacy names:
module@0xd0000000 {
compatible = "xen,linux-initrd", "xen,multiboot-module";
reg = <0xd0000000 0x5678>;
};
Command lines
=============
Xen also checks for properties directly under /chosen to find suitable command
lines for Xen and Dom0. The logic is the following:
- If xen,xen-bootargs is present, it will be used for Xen.
- If xen,dom0-bootargs is present, it will be used for Dom0.
- If xen,xen-bootargs is _not_ present, but xen,dom0-bootargs is,
bootargs will be used for Xen.
- If a kernel boot module is present and has a bootargs property then
the top-level bootargs will used for Xen.
- If no Xen specific properties are present, bootargs is for Dom0.
- If xen,xen-bootargs is present, but xen,dom0-bootargs is missing,
bootargs will be used for Dom0.
Most of these cases is to make booting with Xen-unaware bootloaders easier.
For those you would hardcode the Xen commandline in the DTB under
/chosen/xen,xen-bootargs and would let the bootloader set the Dom0 command
line by writing bootargs (as for native Linux).
A Xen-aware bootloader would set xen,xen-bootargs for Xen, xen,dom0-bootargs
for Dom0 and bootargs for native Linux.
UEFI boot and DT
================
When Xen is booted using UEFI, it doesn't read the configuration file if any
multiboot module is specified. To force Xen to load the configuration file, the
boolean property xen,uefi-cfg-load must be declared in the /chosen node.
Creating Multiple Domains directly from Xen
===========================================
It is possible to have Xen create other domains, in addition to dom0,
out of the information provided via device tree. A kernel and initrd
(optional) need to be specified for each guest.
For each domain to be created there needs to be one node under /chosen
with the following properties:
- compatible
For domUs: "xen,domain"
- memory
A 64-bit integer specifying the amount of kilobytes of RAM to
allocate to the guest.
- cpus
An integer specifying the number of vcpus to allocate to the guest.
- vpl011
An empty property to enable/disable a virtual pl011 for the guest to
use. The virtual pl011 uses SPI number 0 (see GUEST_VPL011_SPI).
Please note that the SPI used for the virtual pl011 could clash with the
physical SPI of a physical device assigned to the guest.
- nr_spis
Optional. A 32-bit integer specifying the number of SPIs (Shared
Peripheral Interrupts) to allocate for the domain. If nr_spis is
missing, the max number of SPIs supported by the physical GIC is
used, or GUEST_VPL011_SPI+1 if vpl011 is enabled, whichever is
greater.
- #address-cells and #size-cells
Both #address-cells and #size-cells need to be specified because
both sub-nodes (described shortly) have reg properties.
Under the "xen,domain" compatible node, one or more sub-nodes are present
for the DomU kernel and ramdisk.
The kernel sub-node has the following properties:
- compatible
"multiboot,kernel", "multiboot,module"
- reg
Specifies the physical address of the kernel in RAM and its
length.
- bootargs (optional)
Command line parameters for the guest kernel.
The ramdisk sub-node has the following properties:
- compatible
"multiboot,ramdisk", "multiboot,module"
- reg
Specifies the physical address of the ramdisk in RAM and its
length.
Example
=======
chosen {
domU1 {
compatible = "xen,domain";
#address-cells = <0x2>;
#size-cells = <0x1>;
memory = <0 131072>;
cpus = <2>;
vpl011;
module@0x4a000000 {
compatible = "multiboot,kernel", "multiboot,module";
reg = <0x0 0x4a000000 0xffffff>;
bootargs = "console=ttyAMA0 init=/bin/sh";
};
module@0x4b000000 {
compatible = "multiboot,ramdisk", "multiboot,module";
reg = <0x0 0x4b000000 0xffffff>;
};
};
domU2 {
compatible = "xen,domain";
#address-cells = <0x2>;
#size-cells = <0x1>;
memory = <0 65536>;
cpus = <1>;
module@0x4c000000 {
compatible = "multiboot,kernel", "multiboot,module";
reg = <0x0 0x4c000000 0xffffff>;
bootargs = "console=ttyAMA0 init=/bin/sh";
};
module@0x4d000000 {
compatible = "multiboot,ramdisk", "multiboot,module";
reg = <0x0 0x4d000000 0xffffff>;
};
};
};
Device Assignment
=================
Device Assignment (Passthrough) is supported by adding another module,
alongside the kernel and ramdisk, with the device tree fragment
corresponding to the device node to assign to the guest.
The dtb sub-node should have the following properties:
- compatible
"multiboot,device-tree" and "multiboot,module"
- reg
Specifies the physical address of the device tree binary fragment
RAM and its length.
As an example:
module@0xc000000 {
compatible = "multiboot,device-tree", "multiboot,module";
reg = <0x0 0xc000000 0xffffff>;
};
The DTB fragment is loaded at 0xc000000 in the example above. It should
follow the convention explained in docs/misc/arm/passthrough.txt. The
DTB fragment will be added to the guest device tree, so that the guest
kernel will be able to discover the device.
Static Allocation
=============
Static Allocation refers to system or sub-system(domains) for which memory
areas are pre-defined by configuration using physical address ranges.
Memory can be statically allocated to a domain using the property "xen,static-
mem" defined in the domain configuration. The number of cells for the address
and the size must be defined using respectively the properties
"#xen,static-mem-address-cells" and "#xen,static-mem-size-cells".
The property 'memory' is still needed and should match the amount of memory
given to the guest. Currently, it either comes from static memory or lets Xen
allocate from heap. *Mixing* is not supported.
The static memory will be mapped in the guest at the usual guest memory
addresses (GUEST_RAM0_BASE, GUEST_RAM1_BASE) defined by
xen/include/public/arch-arm.h.
Below is an example on how to specify the static memory region in the
device-tree:
/ {
chosen {
domU1 {
compatible = "xen,domain";
#address-cells = <0x2>;
#size-cells = <0x2>;
cpus = <2>;
memory = <0x0 0x80000>;
#xen,static-mem-address-cells = <0x1>;
#xen,static-mem-size-cells = <0x1>;
xen,static-mem = <0x30000000 0x20000000>;
...
};
};
};
This will reserve a 512MB region starting at the host physical address
0x30000000 to be exclusively used by DomU1.
Reference in new issue View Git Blame Copy Permalink