xen/docs/misc/xenstore.txt

Xenstore protocol specification
-------------------------------

Xenstore implements a database which maps filename-like pathnames
(also known as `keys') to values.  Clients may read and write values,
watch for changes, and set permissions to allow or deny access.  There
is a rudimentary transaction system.

While xenstore and most tools and APIs are capable of dealing with
arbitrary binary data as values, this should generally be avoided.
Data should generally be human-readable for ease of management and
debugging; xenstore is not a high-performance facility and should be
used only for small amounts of control plane data.  Therefore xenstore
values should normally be 7-bit ASCII text strings containing bytes
0x20..0x7f only, and should not contain a trailing nul byte.  (The
APIs used for accessing xenstore generally add a nul when reading, for
the caller's convenience.)

A separate specification will detail the keys and values which are
used in the Xen system and what their meanings are.  (Sadly that
specification currently exists only in multiple out-of-date versions.)


Paths are /-separated and start with a /, just as Unix filenames.

We can speak of two paths being <child> and <parent>, which is the
case if they're identical, or if <parent> is /, or if <parent>/ is an
initial substring of <child>.  (This includes <path> being a child of
itself.)

If a particular path exists, all of its parents do too.  Every
existing path maps to a possibly empty value, and may also have zero
or more immediate children.  There is thus no particular distinction
between directories and leaf nodes.  However, it is conventional not
to store nonempty values at nodes which also have children.

The permitted character for paths set is ASCII alphanumerics and plus
the four punctuation characters -/_@ (hyphen slash underscore atsign).
@ should be avoided except to specify special watches (see below).
Doubled slashes and trailing slashes (except to specify the root) are
forbidden.  The empty path is also forbidden.  Paths longer than 3072
bytes are forbidden; clients specifying relative paths should keep
them to within 2048 bytes.  (See XENSTORE_*_PATH_MAX in xs_wire.h.)


Communication with xenstore is via either sockets, or event channel
and shared memory, as specified in io/xs_wire.h: each message in
either direction is a header formatted as a struct xsd_sockmsg
followed by xsd_sockmsg.len bytes of payload.

The payload syntax varies according to the type field.  Generally
requests each generate a reply with an identical type, req_id and
tx_id.  However, if an error occurs, a reply will be returned with
type ERROR, and only req_id and tx_id copied from the request.

A caller who sends several requests may receive the replies in any
order and must use req_id (and tx_id, if applicable) to match up
replies to requests.  (The current implementation always replies to
requests in the order received but this should not be relied on.)

The payload length (len field of the header) is limited to 4096
(XENSTORE_PAYLOAD_MAX) in both directions.  If a client exceeds the
limit, its xenstored connection will be immediately killed by
xenstored, which is usually catastrophic from the client's point of
view.  Clients (particularly domains, which cannot just reconnect)
should avoid this.

Existing clients do not always contain defences against overly long
payloads.  Increasing xenstored's limit is therefore difficult; it
would require negotiation with the client, and obviously would make
parts of xenstore inaccessible to some clients.  In any case passing
bulk data through xenstore is not recommended as the performance
properties are poor.


---------- Xenstore protocol details - introduction ----------

The payload syntax and semantics of the requests and replies are
described below.  In the payload syntax specifications we use the
following notations:

 |		A nul (zero) byte.
 <foo>		A string guaranteed not to contain any nul bytes.
 <foo|>		Binary data (which may contain zero or more nul bytes)
 <foo>|*	Zero or more strings each followed by a trailing nul
 <foo>|+	One or more strings each followed by a trailing nul
 ?		Reserved value (may not contain nuls)
 ??		Reserved value (may contain nuls)

Except as otherwise noted, reserved values are believed to be sent as
empty strings by all current clients.  Clients should not send
nonempty strings for reserved values; those parts of the protocol may
be used for extension in the future.


Error replies are as follows:

ERROR						E<something>|
	Where E<something> is the name of an errno value
	listed in io/xs_wire.h.  Note that the string name
	is transmitted, not a numeric value.


Where no reply payload format is specified below, success responses
have the following payload:
						OK|

Values commonly included in payloads include:

    <path>
	Specifies a path in the hierarchical key structure.
	If <path> starts with a / it simply represents that path.

	<path> is allowed not to start with /, in which case the
	caller must be a domain (rather than connected via a socket)
	and the path is taken to be relative to /local/domain/<domid>
	(eg, `x/y' sent by domain 3 would mean `/local/domain/3/x/y').

    <domid>
	Integer domid, represented as decimal number 0..65535.
	Parsing errors and values out of range generally go
	undetected.  The special DOMID_... values (see xen.h) are
	represented as integers; unless otherwise specified it
	is an error not to specify a real domain id.



The following are the actual type values, including the request and
reply payloads as applicable:


---------- Database read, write and permissions operations ----------

READ			<path>|			<value|>
WRITE			<path>|<value|>
	Store and read the octet string <value> at <path>.
	WRITE creates any missing parent paths, with empty values.

MKDIR			<path>|
	Ensures that the <path> exists, by necessary by creating
	it and any missing parents with empty values.  If <path>
	or any parent already exists, its value is left unchanged.

RM			<path>|
	Ensures that the <path> does not exist, by deleting
	it and all of its children.  It is not an error if <path> does
	not exist, but it _is_ an error if <path>'s immediate parent
	does not exist either.

DIRECTORY		<path>|			<child-leaf-name>|*
	Gives a list of the immediate children of <path>, as only the
	leafnames.  The resulting children are each named
	<path>/<child-leaf-name>.

GET_PERMS	 	<path>|			<perm-as-string>|+
SET_PERMS		<path>|<perm-as-string>|+?
	<perm-as-string> is one of the following
		w<domid>	write only
		r<domid>	read only
		b<domid>	both read and write
		n<domid>	no access
	See http://wiki.xen.org/wiki/XenBus section
	`Permissions' for details of the permissions system.

---------- Watches ----------

WATCH			<wpath>|<token>|?
	Adds a watch.

	When a <path> is modified (including path creation, removal,
	contents change or permissions change) this generates an event
	on the changed <path>.  Changes made in transactions cause an
	event only if and when committed.  Each occurring event is
	matched against all the watches currently set up, and each
	matching watch results in a WATCH_EVENT message (see below).

	The event's path matches the watch's <wpath> if it is an child
	of <wpath>.

	<wpath> can be a <path> to watch or @<wspecial>.  In the
	latter case <wspecial> may have any syntax but it matches
	(according to the rules above) only the following special
	events which are invented by xenstored:
	    @introduceDomain	occurs on INTRODUCE
	    @releaseDomain 	occurs on any domain crash or
				shutdown, and also on RELEASE
				and domain destruction

	When a watch is first set up it is triggered once straight
	away, with <path> equal to <wpath>.  Watches may be triggered
	spuriously.  The tx_id in a WATCH request is ignored.

	Watches are supposed to be restricted by the permissions
	system but in practice the implementation is imperfect.
	Applications should not rely on being sent a notification for
	paths that they cannot read; however, an application may rely
	on being sent a watch when a path which it _is_ able to read
	is deleted even if that leaves only a nonexistent unreadable
	parent.  A notification may omitted if a node's permissions
	are changed so as to make it unreadable, in which case future
	notifications may be suppressed (and if the node is later made
	readable, some notifications may have been lost).

WATCH_EVENT					<epath>|<token>|
	Unsolicited `reply' generated for matching modification events
	as described above.  req_id and tx_id are both 0.

	<epath> is the event's path, ie the actual path that was
	modified; however if the event was the recursive removal of an
	parent of <wpath>, <epath> is just
	<wpath> (rather than the actual path which was removed).  So
	<epath> is a child of <wpath>, regardless.

	Iff <wpath> for the watch was specified as a relative pathname,
	the <epath> path will also be relative (with the same base,
	obviously).

UNWATCH			<wpath>|<token>|?

RESET_WATCHES		|
	Reset all watches and transactions of the caller.

---------- Transactions ----------

TRANSACTION_START	|			<transid>|
	<transid> is an opaque uint32_t allocated by xenstored
	represented as unsigned decimal.  After this, transaction may
	be referenced by using <transid> (as 32-bit binary) in the
	tx_id request header field.  When transaction is started whole
	db is copied; reads and writes happen on the copy.
	It is not legal to send non-0 tx_id in TRANSACTION_START.
	Currently xenstored has the bug that after 2^32 transactions
	it will allocate the transid 0 for an actual transaction.

TRANSACTION_END		T|
TRANSACTION_END		F|
	tx_id must refer to existing transaction.  After this
 	request the tx_id is no longer valid and may be reused by
	xenstore.  If F, the transaction is discarded.  If T,
	it is committed: if there were any other intervening writes
	then our END gets get EAGAIN.

	The plan is that in the future only intervening `conflicting'
	writes cause EAGAIN, meaning only writes or other commits
	which changed paths which were read or written in the
	transaction at hand.

---------- Domain management and xenstored communications ----------

INTRODUCE		<domid>|<mfn>|<evtchn>|?
	Notifies xenstored to communicate with this domain.

	INTRODUCE is currently only used by xend (during domain
	startup and various forms of restore and resume), and
	xenstored prevents its use other than by dom0.

	<domid> must be a real domain id (not 0 and not a special
	DOMID_... value).  <mfn> must be a machine page in that domain
	represented in signed decimal (!).  <evtchn> must be event
	channel is an unbound event channel in <domid> (likewise in
	decimal), on which xenstored will call bind_interdomain.
	Violations of these rules may result in undefined behaviour;
	for example passing a high-bit-set 32-bit mfn as an unsigned
	decimal will attempt to use 0x7fffffff instead (!).

RELEASE			<domid>|
	Manually requests that xenstored disconnect from the domain.
	The event channel is unbound at the xenstored end and the page
	unmapped.  If the domain is still running it won't be able to
	communicate with xenstored.  NB that xenstored will in any
	case detect domain destruction and disconnect by itself.
	xenstored prevents the use of RELEASE other than by dom0.

GET_DOMAIN_PATH		<domid>|		<path>|
	Returns the domain's base path, as is used for relative
	transactions: ie, /local/domain/<domid> (with <domid>
	normalised).  The answer will be useless unless <domid> is a
	real domain id.

IS_DOMAIN_INTRODUCED	<domid>|		T| or F|
	Returns T if xenstored is in communication with the domain:
	ie, if INTRODUCE for the domain has not yet been followed by
	domain destruction or explicit RELEASE.

RESUME			<domid>|

	Arranges that @releaseDomain events will once more be
	generated when the domain becomes shut down.  This might have
	to be used if a domain were to be shut down (generating one
	@releaseDomain) and then subsequently restarted, since the
	state-sensitive algorithm in xenstored will not otherwise send
	further watch event notifications if the domain were to be
	shut down again.

	It is not clear whether this is possible since one would
	normally expect a domain not to be restarted after being shut
	down without being destroyed in the meantime.  There are
	currently no users of this request in xen-unstable.

	xenstored prevents the use of RESUME other than by dom0.

SET_TARGET		<domid>|<tdomid>|
	Notifies xenstored that domain <domid> is targeting domain
	<tdomid>. This grants domain <domid> full access to paths
	owned by <tdomid>. Domain <domid> also inherits all
	permissions granted to <tdomid> on all other paths. This
	allows <domid> to behave as if it were dom0 when modifying
	paths related to <tdomid>.

	xenstored prevents the use of SET_TARGET other than by dom0.

---------- Miscellaneous ----------

DEBUG			print|<string>|??	    sends <string> to debug log
DEBUG			print|<thing-with-no-nul>   EINVAL
DEBUG			check|??		    checks xenstored innards
DEBUG			<anything-else|>	    no-op (future extension)

	These requests should not generally be used and may be
	withdrawn in the future.