[IA64] iomem support for driver domains.

First steps in hypevisor to support driver domains.

IO ports capabilities added (not yet used).
IO mem capabilities checked.
ASSIGN_nocache flag added.
Memory attributes checked.

Signed-off-by: Tristan Gingold <tristan.gingold@bull.net>
This commit is contained in:
awilliam@xenbuild.aw committed 2006-07-27 09:47:10 -06:00
1 parent fc3d48f35d
commit 0ba183ab7e
6 files changed
+135 -41

No files matched your search

+43 -1
View File
@@ -20,6 +20,7 @@
#include <public/sched_ctl.h>
#include <asm/vmx.h>
#include <asm/dom_fw.h>
#include <xen/iocap.h>
void build_physmap_table(struct domain *d);
@@ -279,6 +280,29 @@ long arch_do_dom0_op(dom0_op_t *op, XEN_GUEST_HANDLE(dom0_op_t) u_dom0_op)
}
break;
case DOM0_IOPORT_PERMISSION:
{
struct domain *d;
unsigned int fp = op->u.ioport_permission.first_port;
unsigned int np = op->u.ioport_permission.nr_ports;
ret = -ESRCH;
d = find_domain_by_id(op->u.ioport_permission.domain);
if (unlikely(d == NULL))
break;
if (np == 0)
ret = 0;
else {
if (op->u.ioport_permission.allow_access)
ret = ioports_permit_access(d, fp, fp + np - 1);
else
ret = ioports_deny_access(d, fp, fp + np - 1);
}
put_domain(d);
}
break;
default:
printf("arch_do_dom0_op: unrecognized dom0 op: %d!!!\n",op->cmd);
ret = -ENOSYS;
@@ -289,6 +313,24 @@ long arch_do_dom0_op(dom0_op_t *op, XEN_GUEST_HANDLE(dom0_op_t) u_dom0_op)
}
#ifdef CONFIG_XEN_IA64_DOM0_VP
static unsigned long
dom0vp_ioremap(struct domain *d, unsigned long mpaddr, unsigned long size)
{
unsigned long end;
/* Linux may use a 0 size! */
if (size == 0)
size = PAGE_SIZE;
end = PAGE_ALIGN(mpaddr + size);
if (!iomem_access_permitted(d, mpaddr >> PAGE_SHIFT,
(end >> PAGE_SHIFT) - 1))
return -EPERM;
return assign_domain_mmio_page(d, mpaddr, size);
}
unsigned long
do_dom0vp_op(unsigned long cmd,
unsigned long arg0, unsigned long arg1, unsigned long arg2,
@@ -299,7 +341,7 @@ do_dom0vp_op(unsigned long cmd,
switch (cmd) {
case IA64_DOM0VP_ioremap:
ret = assign_domain_mmio_page(d, arg0, arg1);
ret = dom0vp_ioremap(d, arg0, arg1);
break;
case IA64_DOM0VP_phystomach:
ret = ____lookup_domain_mpa(d, arg0 << PAGE_SHIFT);
+5
View File
@@ -360,6 +360,9 @@ int arch_domain_create(struct domain *d)
if ((d->arch.mm.pgd = pgd_alloc(&d->arch.mm)) == NULL)
goto fail_nomem;
d->arch.ioport_caps = rangeset_new(d, "I/O Ports",
RANGESETF_prettyprint_hex);
printf ("arch_domain_create: domain=%p\n", d);
return 0;
@@ -885,6 +888,8 @@ static void physdev_init_dom0(struct domain *d)
BUG();
if (irqs_permit_access(d, 0, NR_IRQS-1))
BUG();
if (ioports_permit_access(d, 0, 0xffff))
BUG();
}
int construct_dom0(struct domain *d,
+73 -40
View File
@@ -418,13 +418,13 @@ u64 translate_domain_pte(u64 pteval, u64 address, u64 itir__, u64* logps,
u64 mask, mpaddr, pteval2;
u64 arflags;
u64 arflags2;
u64 maflags2;
pteval &= ((1UL << 53) - 1);// ignore [63:53] bits
// FIXME address had better be pre-validated on insert
mask = ~itir_mask(itir.itir);
mpaddr = (((pteval & ~_PAGE_ED) & _PAGE_PPN_MASK) & ~mask) |
(address & mask);
mpaddr = ((pteval & _PAGE_PPN_MASK) & ~mask) | (address & mask);
#ifdef CONFIG_XEN_IA64_DOM0_VP
if (itir.ps > PAGE_SHIFT) {
itir.ps = PAGE_SHIFT;
@@ -454,6 +454,8 @@ u64 translate_domain_pte(u64 pteval, u64 address, u64 itir__, u64* logps,
}
#endif
pteval2 = lookup_domain_mpa(d, mpaddr, entry);
/* Check access rights. */
arflags = pteval & _PAGE_AR_MASK;
arflags2 = pteval2 & _PAGE_AR_MASK;
if (arflags != _PAGE_AR_R && arflags2 == _PAGE_AR_R) {
@@ -466,36 +468,53 @@ u64 translate_domain_pte(u64 pteval, u64 address, u64 itir__, u64* logps,
pteval2, arflags2, mpaddr);
#endif
pteval = (pteval & ~_PAGE_AR_MASK) | _PAGE_AR_R;
}
}
pteval2 &= _PAGE_PPN_MASK; // ignore non-addr bits
pteval2 |= (pteval & _PAGE_ED);
pteval2 |= _PAGE_PL_2; // force PL0->2 (PL3 is unaffected)
pteval2 |= (pteval & ~_PAGE_PPN_MASK);
/*
* Don't let non-dom0 domains map uncached addresses. This can
* happen when domU tries to touch i/o port space. Also prevents
* possible address aliasing issues.
* WB => WB
* UC, UCE, WC => WB
* NaTPage => NaTPage
*/
if (d != dom0 && (pteval2 & _PAGE_MA_MASK) != _PAGE_MA_NAT)
pteval2 &= ~_PAGE_MA_MASK;
/* Check memory attribute. The switch is on the *requested* memory
attribute. */
maflags2 = pteval2 & _PAGE_MA_MASK;
switch (pteval & _PAGE_MA_MASK) {
case _PAGE_MA_NAT:
/* NaT pages are always accepted! */
break;
case _PAGE_MA_UC:
case _PAGE_MA_UCE:
case _PAGE_MA_WC:
if (maflags2 == _PAGE_MA_WB) {
/* Don't let domains WB-map uncached addresses.
This can happen when domU tries to touch i/o
port space. Also prevents possible address
aliasing issues. */
printf("Warning: UC to WB for mpaddr=%lx\n", mpaddr);
pteval = (pteval & ~_PAGE_MA_MASK) | _PAGE_MA_WB;
}
break;
case _PAGE_MA_WB:
if (maflags2 != _PAGE_MA_WB) {
/* Forbid non-coherent access to coherent memory. */
panic_domain(NULL, "try to use WB mem attr on "
"UC page, mpaddr=%lx\n", mpaddr);
}
break;
default:
panic_domain(NULL, "try to use unknown mem attribute\n");
}
/* If shadow mode is enabled, virtualize dirty bit. */
if (shadow_mode_enabled(d) && (pteval2 & _PAGE_D)) {
u64 mp_page = mpaddr >> PAGE_SHIFT;
pteval2 |= _PAGE_VIRT_D;
/* If shadow mode is enabled, virtualize dirty bit. */
if (shadow_mode_enabled(d) && (pteval & _PAGE_D)) {
u64 mp_page = mpaddr >> PAGE_SHIFT;
pteval |= _PAGE_VIRT_D;
/* If the page is not already dirty, don't set the dirty bit.
This is a small optimization! */
if (mp_page < d->arch.shadow_bitmap_size * 8
&& !test_bit(mp_page, d->arch.shadow_bitmap))
pteval2 = (pteval2 & ~_PAGE_D);
}
return pteval2;
/* If the page is not already dirty, don't set the dirty bit! */
if (mp_page < d->arch.shadow_bitmap_size * 8
&& !test_bit(mp_page, d->arch.shadow_bitmap))
pteval &= ~_PAGE_D;
}
/* Ignore non-addr bits of pteval2 and force PL0->2
(PL3 is unaffected) */
return (pteval & ~_PAGE_PPN_MASK) |
(pteval2 & _PAGE_PPN_MASK) | _PAGE_PL_2;
}
// given a current domain metaphysical address, return the physical address
@@ -823,8 +842,19 @@ assign_new_domain0_page(struct domain *d, unsigned long mpaddr)
#endif
}
static unsigned long
flags_to_prot (unsigned long flags)
{
unsigned long res = _PAGE_PL_2 | __DIRTY_BITS;
res |= flags & ASSIGN_readonly ? _PAGE_AR_R: _PAGE_AR_RWX;
res |= flags & ASSIGN_nocache ? _PAGE_MA_UC: _PAGE_MA_WB;
return res;
}
/* map a physical address to the specified metaphysical addr */
// flags: currently only ASSIGN_readonly
// flags: currently only ASSIGN_readonly, ASSIGN_nocache
// This is called by assign_domain_mmio_page().
// So accessing to pte is racy.
void
@@ -836,13 +866,12 @@ __assign_domain_page(struct domain *d,
pte_t old_pte;
pte_t new_pte;
pte_t ret_pte;
unsigned long arflags = (flags & ASSIGN_readonly)? _PAGE_AR_R: _PAGE_AR_RWX;
unsigned long prot = flags_to_prot(flags);
pte = lookup_alloc_domain_pte(d, mpaddr);
old_pte = __pte(0);
new_pte = pfn_pte(physaddr >> PAGE_SHIFT,
__pgprot(__DIRTY_BITS | _PAGE_PL_2 | arflags));
new_pte = pfn_pte(physaddr >> PAGE_SHIFT, __pgprot(prot));
ret_pte = ptep_cmpxchg_rel(&d->arch.mm, mpaddr, pte, old_pte, new_pte);
if (pte_val(ret_pte) == pte_val(old_pte))
smp_mb();
@@ -941,7 +970,7 @@ assign_domain_mmio_page(struct domain *d,
__func__, __LINE__, d, mpaddr, size);
return -EINVAL;
}
assign_domain_same_page(d, mpaddr, size, ASSIGN_writable);
assign_domain_same_page(d, mpaddr, size, ASSIGN_writable | ASSIGN_nocache);
return mpaddr;
}
@@ -967,11 +996,12 @@ assign_domain_page_replace(struct domain *d, unsigned long mpaddr,
volatile pte_t* pte;
pte_t old_pte;
pte_t npte;
unsigned long arflags = (flags & ASSIGN_readonly)? _PAGE_AR_R: _PAGE_AR_RWX;
unsigned long prot = flags_to_prot(flags);
pte = lookup_alloc_domain_pte(d, mpaddr);
// update pte
npte = pfn_pte(mfn, __pgprot(__DIRTY_BITS | _PAGE_PL_2 | arflags));
npte = pfn_pte(mfn, __pgprot(prot));
old_pte = ptep_xchg(mm, mpaddr, pte, npte);
if (pte_mem(old_pte)) {
unsigned long old_mfn = pte_pfn(old_pte);
@@ -1013,7 +1043,7 @@ assign_domain_page_cmpxchg_rel(struct domain* d, unsigned long mpaddr,
unsigned long old_arflags;
pte_t old_pte;
unsigned long new_mfn;
unsigned long new_arflags;
unsigned long new_prot;
pte_t new_pte;
pte_t ret_pte;
@@ -1029,10 +1059,9 @@ assign_domain_page_cmpxchg_rel(struct domain* d, unsigned long mpaddr,
return -EINVAL;
}
new_arflags = (flags & ASSIGN_readonly)? _PAGE_AR_R: _PAGE_AR_RWX;
new_prot = flags_to_prot(flags);
new_mfn = page_to_mfn(new_page);
new_pte = pfn_pte(new_mfn,
__pgprot(__DIRTY_BITS | _PAGE_PL_2 | new_arflags));
new_pte = pfn_pte(new_mfn, __pgprot(new_prot));
// update pte
ret_pte = ptep_cmpxchg_rel(mm, mpaddr, pte, old_pte, new_pte);
@@ -1152,6 +1181,10 @@ dom0vp_add_physmap(struct domain* d, unsigned long gpfn, unsigned long mfn,
int error = 0;
struct domain* rd;
/* Not allowed by a domain. */
if (flags & ASSIGN_nocache)
return -EINVAL;
rd = find_domain_by_id(domid);
if (unlikely(rd == NULL)) {
switch (domid) {
+4
View File
@@ -11,6 +11,7 @@
#include <xen/list.h>
#include <xen/cpumask.h>
#include <asm/fpswa.h>
#include <xen/rangeset.h>
struct p2m_entry {
volatile pte_t* pte;
@@ -87,6 +88,9 @@ struct arch_domain {
};
};
/* Allowed accesses to io ports. */
struct rangeset *ioport_caps;
/* There are two ranges of RID for a domain:
one big range, used to virtualize domain RID,
one small range for internal Xen use (metaphysical). */
+7
View File
@@ -7,4 +7,11 @@
#ifndef __IA64_IOCAP_H__
#define __IA64_IOCAP_H__
#define ioports_permit_access(d, s, e) \
rangeset_add_range((d)->arch.ioport_caps, s, e)
#define ioports_deny_access(d, s, e) \
rangeset_remove_range((d)->arch.ioport_caps, s, e)
#define ioports_access_permitted(d, s, e) \
rangeset_contains_range((d)->arch.ioport_caps, s, e)
#endif /* __IA64_IOCAP_H__ */
+3
View File
@@ -359,6 +359,9 @@ DEFINE_XEN_GUEST_HANDLE(vcpu_guest_context_t);
#define _ASSIGN_readonly 0
#define ASSIGN_readonly (1UL << _ASSIGN_readonly)
#define ASSIGN_writable (0UL << _ASSIGN_readonly) // dummy flag
/* Internal only: memory attribute must be WC/UC/UCE. */
#define _ASSIGN_nocache 1
#define ASSIGN_nocache (1UL << _ASSIGN_nocache)
/* This structure has the same layout of struct ia64_boot_param, defined in
<asm/system.h>. It is redefined here to ease use. */
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.