xen-project/xen
1
0 Fork 0
mirror of https://github.com/xen-project/xen.git synced 2026-10-28 02:01:24 +01:00
Code Issues Activity

xen/arm: Fix platforms Kconfig indent

Browse Source 
Fix platforms/Kconfig and Kconfig.debug help indent to respect the
standard (tab + 2 spaces).
While there also move some default in Kconfig.debug before the help
message.

Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
This commit is contained in:
Bertrand Marquis authored and Michal Orzel committed 2025-03-04 08:54:53 +01:00
1 parent 23bb5f1a11
commit 0ddbaba408
2 files changed
+54 -54
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

xen/arch/arm/Kconfig.debug
+44 -44
View File
@@ -2,85 +2,85 @@ choice
bool "Early printk"
optional
help
You may want to enable early printk if you are debugging code
that executes before the console is initialized.
You may want to enable early printk if you are debugging code
that executes before the console is initialized.
Note that selecting this option will limit Xen to a single UART
definition. Attempting to boot Xen image on a different
platform *will not work*, so this option should not be enable
for Xens that are intended to be portable.
Note that selecting this option will limit Xen to a single UART
definition. Attempting to boot Xen image on a different
platform *will not work*, so this option should not be enable
for Xens that are intended to be portable.
Choose one of the UART drivers for early printk, then you'll
have to specify the parameters, like the base address.
Choose one of the UART drivers for early printk, then you'll
have to specify the parameters, like the base address.
config EARLY_UART_CHOICE_8250
select EARLY_UART_8250
bool "Early printk via 8250 UART"
help
Say Y here if you wish the early printk to direct their
output to a 8250 UART.
Say Y here if you wish the early printk to direct their
output to a 8250 UART.
config EARLY_UART_CHOICE_CADENCE
select EARLY_UART_CADENCE
depends on ARM_64
bool "Early printk via Cadence UART"
help
Say Y here if you wish the early printk to direct their
output to a Cadence UART.
Say Y here if you wish the early printk to direct their
output to a Cadence UART.
config EARLY_UART_CHOICE_EXYNOS4210
select EARLY_UART_EXYNOS4210
depends on ARM_32
bool "Early printk via Exynos4210 UART"
help
Say Y here if you wish the early printk to direct their
output to a Exynos 4210 UART.
Say Y here if you wish the early printk to direct their
output to a Exynos 4210 UART.
config EARLY_UART_CHOICE_IMX_LPUART
select EARLY_UART_IMX_LPUART
depends on ARM_64
bool "Early printk via i.MX LPUART"
help
Say Y here if you wish the early printk to direct their
output to a i.MX LPUART.
Say Y here if you wish the early printk to direct their
output to a i.MX LPUART.
config EARLY_UART_CHOICE_LINFLEX
select EARLY_UART_LINFLEX
depends on ARM_64
bool "Early printk via NXP LINFlexD UART"
help
Say Y here if you wish the early printk to direct their
output to an NXP LINFlexD UART.
Say Y here if you wish the early printk to direct their
output to an NXP LINFlexD UART.
config EARLY_UART_CHOICE_MESON
select EARLY_UART_MESON
depends on ARM_64
bool "Early printk via MESON UART"
help
Say Y here if you wish the early printk to direct their
output to a MESON UART.
Say Y here if you wish the early printk to direct their
output to a MESON UART.
config EARLY_UART_CHOICE_MVEBU
select EARLY_UART_MVEBU
depends on ARM_64
bool "Early printk via MVEBU UART"
help
Say Y here if you wish the early printk to direct their
output to a MVEBU UART.
Say Y here if you wish the early printk to direct their
output to a MVEBU UART.
config EARLY_UART_CHOICE_PL011
select EARLY_UART_PL011
bool "Early printk via PL011 UART"
help
Say Y here if you wish the early printk to direct their
output to a PL011 UART.
Say Y here if you wish the early printk to direct their
output to a PL011 UART.
config EARLY_UART_CHOICE_SCIF
select EARLY_UART_SCIF
bool "Early printk via SCIF UART"
help
Say Y here if you wish the early printk to direct their
output to a SCIF UART.
Say Y here if you wish the early printk to direct their
output to a SCIF UART.
endchoice
@@ -131,15 +131,14 @@ config EARLY_UART_SIZE
config EARLY_UART_PL011_BAUD_RATE
depends on EARLY_UART_PL011
int "Early printk UART baud rate for pl011"
help
Optionally sets the baud rate which should be used to configure
the UART at start of day.
If EARLY_UART_PL011_BAUD_RATE is set to 0 then the code will
not try to initialize the UART, so that bootloader or firmware
settings can be used for maximum compatibility.
default 0
help
Optionally sets the baud rate which should be used to configure
the UART at start of day.
If EARLY_UART_PL011_BAUD_RATE is set to 0 then the code will
not try to initialize the UART, so that bootloader or firmware
settings can be used for maximum compatibility.
config EARLY_UART_PL011_MMIO32
bool "32-bit only MMIO for PL011 early printk"
@@ -155,24 +154,25 @@ config EARLY_UART_INIT
config EARLY_UART_8250_REG_SHIFT
depends on EARLY_UART_8250
int "Early printk, left-shift to apply to the register offsets within the 8250 UART"
help
EARLY_UART_8250_REG_SHIFT is, optionally, the left-shift to
apply to the register offsets within the UART with early
printk.
Default to 0.
default 0
help
EARLY_UART_8250_REG_SHIFT is, optionally, the left-shift to
apply to the register offsets within the UART with early
printk.
Default to 0.
choice EARLY_UART_SCIF_VERSION
prompt "Early printk UART SCIF interface version"
depends on EARLY_UART_SCIF
default EARLY_UART_SCIF_VERSION_NONE
help
Select the interface version of the SCIF UART.
Select the interface version of the SCIF UART.
Select EARLY_UART_SCIF_VERSION_NONE to use the default
interface version (SCIF).
Select EARLY_UART_SCIF_VERSION_NONE to use the default
interface version (SCIF).
config EARLY_UART_SCIF_VERSION_NONE
bool "default SCIF UART interface"
config EARLY_UART_SCIF_VERSION_A
xen/arch/arm/platforms/Kconfig
+10 -10
View File
@@ -2,15 +2,15 @@ choice
prompt "Platform Support" if MMU
default ALL_PLAT
help
Choose which hardware platform to enable in Xen.
Choose which hardware platform to enable in Xen.
If unsure, choose ALL_PLAT.
If unsure, choose ALL_PLAT.
config ALL_PLAT
bool "All Platforms"
help
Enable support for all available hardware platforms. It doesn't
automatically select any of the related drivers.
Enable support for all available hardware platforms. It doesn't
automatically select any of the related drivers.
config QEMU
bool "QEMU aarch virt machine support"
@@ -18,8 +18,8 @@ config QEMU
select GICV3
select HAS_PL011
help
Enable all the required drivers for QEMU aarch64 virt emulated
machine.
Enable all the required drivers for QEMU aarch64 virt emulated
machine.
config RCAR3
bool "Renesas RCar3 support"
@@ -27,7 +27,7 @@ config RCAR3
select HAS_SCIF
select IPMMU_VMSA
help
Enable all the required drivers for Renesas RCar3
Enable all the required drivers for Renesas RCar3
config RCAR4
bool "Renesas RCar4 support"
@@ -44,7 +44,7 @@ config MPSOC
select HAS_CADENCE_UART
select ARM_SMMU
help
Enable all the required drivers for Xilinx Ultrascale+ MPSoC
Enable all the required drivers for Xilinx Ultrascale+ MPSoC
config S32G3
bool "NXP S32G3 Processors support"
@@ -52,12 +52,12 @@ config S32G3
select HAS_LINFLEX
select SCMI_SMC
help
Enable all the required drivers for NXP S32G3 Processors Family
Enable all the required drivers for NXP S32G3 Processors Family
config NO_PLAT
bool "No Platforms"
help
Do not enable specific support for any platform.
Do not enable specific support for any platform.
endchoice
Reference in new issue
xen-project/xen
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.

The note is not visible to the blocked user.