bitkeeper revision 1.202 (3eb16700-gEpXFlt08DC4GuoWltR6Q)

jws merge

.rootkeys

@@ -298,6 +298,7 @@
 3ddb79c0c0cX_DZE209-Bb-Rx1v-Aw xen/include/xeno/cache.h
 3e9c248aEG_nCngztiFmv5CfayNkcA xen/include/xeno/cdrom.h
 3ddb79c259jh8hE7vre_8NuE7nwNSA xen/include/xeno/config.h
+3eb165e0eawr3R-p2ZQtSdLWtLRN_A xen/include/xeno/console.h
 3ddb79c1V44RD26YqCUm-kqIupM37A xen/include/xeno/ctype.h
 3ddb79c05DdHQ0UxX_jKsXdR4QlMCA xen/include/xeno/delay.h
 3ddb79c2PMeWTK86y4C3F4MzHw4A1g xen/include/xeno/dom0_ops.h
@@ -416,7 +417,6 @@
 3ea53c6em6uzVHSiGqrbbAVofyRY_g xenolinux-2.4.21-pre4-sparse/drivers/block/genhd.c
 3e5a4e66mrtlmV75L1tjKDg8RaM5gA xenolinux-2.4.21-pre4-sparse/drivers/block/ll_rw_blk.c
 3ead095dEkj9JJWYYBnbvW3OYbKFxg xenolinux-2.4.21-pre4-sparse/drivers/char/Config.in
-3ead095d00j61GCBaYdu_SwmY-vdSQ xenolinux-2.4.21-pre4-sparse/drivers/char/Makefile
 3ead095dPseRoFELVf_xcnVXjq02hw xenolinux-2.4.21-pre4-sparse/drivers/char/dummy_console.c
 3e5a4e66rw65CxyolW9PKz4GG42RcA xenolinux-2.4.21-pre4-sparse/drivers/char/tty_io.c
 3e5a4e669uzIE54VwucPYtGwXLAbzA xenolinux-2.4.21-pre4-sparse/fs/exec.c

xen/common/domain.c

@@ -15,6 +15,7 @@
 #include <asm/flushtlb.h>
 #include <asm/msr.h>
 #include <xeno/blkdev.h>
+#include <xeno/console.h>
 
 /*
  * NB. No ring-3 access in initial guestOS pagetables. Note that we allow
@@ -625,6 +626,11 @@ int setup_guestos(struct task_struct *p, dom0_newdomain_t *params,
 
     virt_startinfo_address->dom_id = p->domain;
     virt_startinfo_address->flags  = IS_PRIV(p) ? SIF_PRIVILEGED : 0;
+    // guest os can have console if:
+    // 1) its privileged (need iopl right now)
+    // 2) its the owner of the console (and therefore will get kbd/mouse events)
+    // 3) xen hasnt tried to touch the console (see console.h)
+    virt_startinfo_address->flags |= (IS_PRIV(p) && CONSOLE_ISOWNER(p) && opt_console == 0) ? SIF_CONSOLE : 0;
 
     if ( initrd_len )
     {

xen/common/kernel.c

@@ -15,6 +15,7 @@
 #include <asm/byteorder.h>
 #include <linux/if_ether.h>
 #include <asm/domain_page.h>
+#include <xeno/console.h>
 
 static int xpos, ypos;
 static volatile unsigned char *video;
@@ -32,6 +33,7 @@ void init_serial(void);
 void start_of_day(void);
 
 /* Command line options and variables. */
+int opt_console = 1;
 unsigned int opt_ser_baud = 9600;  /* default baud for COM1 */
 unsigned int opt_dom0_mem = 16000; /* default kbytes for DOM0 */
 unsigned int opt_ne_base = 0; /* NE2k NICs cannot be probed */
@@ -43,6 +45,7 @@ static struct {
     int type;
     void *var;
 } opts[] = {
+    { "console",  OPT_BOOL, &opt_console },
     { "ser_baud", OPT_UINT, &opt_ser_baud },
     { "dom0_mem", OPT_UINT, &opt_dom0_mem }, 
     { "ne_base",  OPT_UINT, &opt_ne_base },
@@ -219,6 +222,7 @@ void cmain (unsigned long magic, multiboot_info_t *mbi)
 
 void init_serial(void)
 {
+#ifdef CONFIG_OUTPUT_SERIAL
     /* 'opt_ser_baud' baud, no parity, 1 stop bit, 8 data bits. */
     outb(0x83, SERIAL_BASE+DATA_FORMAT);
     outb(115200/opt_ser_baud, SERIAL_BASE+DIVISOR_LO);
@@ -227,14 +231,17 @@ void init_serial(void)
 
     /* No interrupts. */
     outb(0x00, SERIAL_BASE+INT_ENABLE);
+#endif
 }
 
 
 void putchar_serial(unsigned char c)
 {
+#ifdef CONFIG_OUTPUT_SERIAL
     if ( c == '\n' ) putchar_serial('\r');
     while ( !(inb(SERIAL_BASE+LINE_STATUS)&(1<<5)) ) barrier();
     outb(c, SERIAL_BASE+TX_HOLD);
+#endif
 }
 
 
@@ -247,6 +254,7 @@ void putchar_serial(unsigned char c)
 /* This is actually code from vgaHWRestore in an old version of XFree86 :-) */
 void init_vga(void)
 {
+#ifdef CONFIG_OUTPUT_CONSOLE
     /* The following VGA state was saved from a chip in text mode 3. */
     static unsigned char regs[] = {
         /* Sequencer registers */
@@ -265,81 +273,93 @@ void init_vga(void)
     int i, j = 0;
     volatile unsigned char tmp;
 
-    tmp = inb(0x3da);
-    outb(0x00, 0x3c0);
-
-    for ( i = 0; i < 5;  i++ )
+    if(opt_console) {
+      tmp = inb(0x3da);
+      outb(0x00, 0x3c0);
+      
+      for ( i = 0; i < 5;  i++ )
         outw((regs[j++] << 8) | i, 0x3c4);
-  
-    /* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 of CRTC[17]. */
-    outw(((regs[5+17] & 0x7F) << 8) | 17, 0x3d4);
-    
-    for ( i = 0; i < 25; i++ ) 
+      
+      /* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 of CRTC[17]. */
+      outw(((regs[5+17] & 0x7F) << 8) | 17, 0x3d4);
+      
+      for ( i = 0; i < 25; i++ ) 
         outw((regs[j++] << 8) | i, 0x3d4);
-    
-    for ( i = 0; i < 9;  i++ )
+      
+      for ( i = 0; i < 9;  i++ )
         outw((regs[j++] << 8) | i, 0x3ce);
-    
-    for ( i = 0; i < 21; i++ )
-    {
-        tmp = inb(0x3da);
-        outb(i, 0x3c0); 
-        outb(regs[j++], 0x3c0);
+      
+      for ( i = 0; i < 21; i++ )
+	{
+	  tmp = inb(0x3da);
+	  outb(i, 0x3c0); 
+	  outb(regs[j++], 0x3c0);
+	}
+      
+      tmp = inb(0x3da);
+      outb(0x20, 0x3c0);
     }
-
-    tmp = inb(0x3da);
-    outb(0x20, 0x3c0);
+#endif
 }
 
 
 /* Clear the screen and initialize VIDEO, XPOS and YPOS.  */
 void cls(void)
 {
+#ifdef CONFIG_OUTPUT_CONSOLE
     int i;
 
-    video = (unsigned char *) VIDEO;
-  
-    for (i = 0; i < COLUMNS * LINES * 2; i++)
+    if(opt_console) {
+      video = (unsigned char *) VIDEO;
+      
+      for (i = 0; i < COLUMNS * LINES * 2; i++)
         *(video + i) = 0;
-
-    xpos = 0;
-    ypos = 0;
-
-    outw(10+(1<<(5+8)), 0x3d4); /* cursor off */
+      
+      xpos = 0;
+      ypos = 0;
+      
+      outw(10+(1<<(5+8)), 0x3d4); /* cursor off */
+    }
+#endif
 }
 
 
 /* Put the character C on the screen.  */
 static void putchar (int c)
 {
+#ifdef CONFIG_OUTPUT_CONSOLE
     static char zeroarr[2*COLUMNS] = { 0 };
-
     if ( (c != '\n') && ((c < 32) || (c > 126)) ) return;
+#endif
 
     putchar_serial(c);
 
-    if ( c == '\n' )
-    {
-    newline:
-        xpos = 0;
-        ypos++;
-        if (ypos >= LINES)
-        {
-            ypos = LINES-1;
-            memcpy((char*)video, 
-                   (char*)video + 2*COLUMNS, (LINES-1)*2*COLUMNS);
-            memcpy((char*)video + (LINES-1)*2*COLUMNS, 
-                   zeroarr, 2*COLUMNS);
-        }
-        return;
-    }
-
-    *(video + (xpos + ypos * COLUMNS) * 2) = c & 0xFF;
-    *(video + (xpos + ypos * COLUMNS) * 2 + 1) = ATTRIBUTE;
-
-    xpos++;
-    if (xpos >= COLUMNS)
+#ifdef CONFIG_OUTPUT_CONSOLE
+    if(opt_console) {
+      if (c == '\n')
+	{
+	newline:
+	  xpos = 0;
+	  ypos++;
+	  if (ypos >= LINES)
+	    {
+	      ypos = LINES-1;
+	      memcpy((char*)video, 
+		     (char*)video + 2*COLUMNS, (LINES-1)*2*COLUMNS);
+	      memcpy((char*)video + (LINES-1)*2*COLUMNS, 
+		     zeroarr, 2*COLUMNS);
+	    }
+	  return;
+	}
+      
+      *(video + (xpos + ypos * COLUMNS) * 2) = c & 0xFF;
+      *(video + (xpos + ypos * COLUMNS) * 2 + 1) = ATTRIBUTE;
+      
+      xpos++;
+      if (xpos >= COLUMNS)
         goto newline;
+    }
+#endif
 }
 
 static inline void __putstr(const char *str)

xen/drivers/char/xen_kbd.c

@@ -31,10 +31,12 @@
 
 #define AUX_IRQ 12
 
+#undef KBD_DEBUG
 
 /* THIS SECTION DEALS WITH CONFIG_XEN_ATTENTION_KEY */
 
-// always set for now.  potentially moved to config.in later.
+// always set for now.  potentially moved to a central config later.
+// this should really affect common/keyhandler.c too
 #define CONFIG_XEN_ATTENTION_KEY
 
 #ifdef CONFIG_XEN_ATTENTION_KEY
@@ -43,8 +45,6 @@ static int xen_attention_key_down = 0;
 #define XEN_ATTENTION_KEY 0x46 // scroll lock
 #define KBD_SCANCODE_KEYUP_MASK 0x80
 
-#undef KBD_DEBUG
-
 /* naive scancode -> key mappings for internal xen use */
 
 static unsigned char keymap_normal[] =
@@ -144,7 +144,7 @@ static unsigned char convert_scancode (unsigned char scancode)
 #endif /* CONFIG_XEN_ATTENTION_KEY */
 
 
-/* THIS SECTION DEALS WITH STORING A RING OF PENDING EVENTS */
+/* THIS SECTION DEALS WITH STORING A RING OF PENDING KBD EVENTS */
 
 // store kbd events waiting to be processed by guest os
 #define KBD_RING_SIZE        64 
@@ -179,9 +179,7 @@ static int kbd_ring_pop() {
 
 /* THIS SECTION DEALS WITH COMMUNICATING PS2 EVENTS/CMDS WITH GUEST OS */
 
-// ownership of keyboard - current defaulting to dom0
-#define KBD_ISOWNER(p) (p->domain == 0) 
-#define KBD_OWNER find_domain_by_id(0) 
+#include <xeno/console.h>
 
 // need lock as there may be _two_ interrupts at play, keyboard and mouse, as well as guest os actions
 static spinlock_t kbd_lock;
@@ -194,7 +192,7 @@ long do_kbd_op(unsigned char op, unsigned char val)
   printk("do_kbd_op: op %2x, val %2x, prod %d, cons %d\n", op, val, kbd_ring_prod, kbd_ring_cons); 
 #endif
 
-  if ( !KBD_ISOWNER(current) ) return -EPERM;  
+  if ( !CONSOLE_ISOWNER(current) ) return -EPERM;  
 
   switch(op) {
   case KBD_OP_WRITEOUTPUT:
@@ -225,6 +223,7 @@ static void keyboard_interrupt(int irq, void *dev_id, struct pt_regs *regs)
   unsigned long flags;
   spin_lock_irqsave(&kbd_lock, flags);
   status = kbd_read_status();
+
 #ifdef KBD_DEBUG
     printk("keyboard_interrupt irq %d, status 0x%2x\n", irq, status);
 #endif
@@ -241,10 +240,14 @@ static void keyboard_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	  //printk("xen_attention_key_down %d\n", xen_attention_key_down);
 	} else if (xen_attention_key_down) {
 	  key_handler *handler; 
-	  unsigned char key = convert_scancode(scancode); 
+	  unsigned char key;
+
+	  spin_unlock_irqrestore(&kbd_lock, flags);
+	  key = convert_scancode(scancode); 
 	  if(key && (handler = get_key_handler(key))) 
 	    (*handler)(key, dev_id, regs); 
 	  
+	  spin_lock_irqsave(&kbd_lock, flags);
 	  status = kbd_read_status();
 	  continue; // do not send key to guest os
 	}
@@ -254,11 +257,11 @@ static void keyboard_interrupt(int irq, void *dev_id, struct pt_regs *regs)
       if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR))) {
 	kbd_ring_push(status, scancode);
 
-	cpu_mask = mark_guest_event(KBD_OWNER, _EVENT_KBD);
+	cpu_mask = mark_guest_event(CONSOLE_OWNER, _EVENT_KBD);
         guest_event_notify(cpu_mask);
 
 	status = kbd_read_status();
-	scancode = kbd_read_input();
+	//scancode = kbd_read_input();
       }
     }
     

xen/include/hypervisor-ifs/hypervisor-if.h

@@ -250,7 +250,8 @@ typedef struct start_info_st {
 } start_info_t;
 
 /* These flags are passed in the 'flags' field of start_info_t. */
-#define SIF_PRIVILEGED 1          /* Is thie domain privileged? */
+#define SIF_PRIVILEGED 1          /* Is the domain privileged? */
+#define SIF_CONSOLE    2          /* Does the domain own the physical console? */
 
 /* For use in guest OSes. */
 extern shared_info_t *HYPERVISOR_shared_info;

xen/include/xeno/console.h

@@ -0,0 +1,32 @@
+// <xeno/console.h> - Xen header file concerning console access
+// Copyright (c) 2003 James Scott, Intel Research Cambridge
+
+// ownership of console - current defaulting to dom0
+// this is currently used to see who gets the PS/2 keyboard/mouse events
+#define CONSOLE_ISOWNER(p) (p->domain == 0) 
+#define CONSOLE_OWNER find_domain_by_id(0) 
+
+
+// Xen output redirection (in common/kernel.c!)
+//
+// This is coarsely done right now - 
+//   a boot-time option for console output
+//   a compile-time option for serial output
+//
+// Really, when starting up a guest os with console privilege, we should:
+//  - reset the video to a known state
+//  - stop sending characters (use global var opt_console)
+//  - allow the guest os access to the video RAM area (instead of the coarse IOPL hack nowadays) and keyboard (see above)
+// Similarly, when stopping that guest os, we should:
+//  - stop allowing the guest os access to video RAM
+//  - reset the video to a known state
+//  - start sending it console output again (if we so desire)
+//
+// resetting the video to a known state has not been explored yet
+// the notion of privileges for guest os's (e.g. console privilege) has not been explored yet
+// so this will do for now
+
+#define CONFIG_OUTPUT_CONSOLE 1 // but see also opt_console
+#define CONFIG_OUTPUT_SERIAL  1
+
+extern int opt_console;

xenolinux-2.4.21-pre4-sparse/arch/xeno/defconfig

@@ -125,9 +125,11 @@ CONFIG_XENOLINUX_BLOCK=y
 #
 # Character devices
 #
+CONFIG_XEN_CONSOLE=y
 # CONFIG_VT is not set
+# CONFIG_VGA_CONSOLE is not set
 # CONFIG_DUMMY_CONSOLE is not set
-CONFIG_PSMOUSE=y
+# CONFIG_PSMOUSE is not set
 # CONFIG_UNIX98_PTYS is not set
 
 #

xenolinux-2.4.21-pre4-sparse/arch/xeno/drivers/console/Makefile

@@ -1,3 +1,3 @@
 O_TARGET := con.o
-obj-y := console.o
+obj-$(CONFIG_XEN_CONSOLE) := console.o
 include $(TOPDIR)/Rules.make

xenolinux-2.4.21-pre4-sparse/arch/xeno/drivers/console/console.c

@@ -24,9 +24,11 @@
 #include <asm/uaccess.h>
 #include <asm/hypervisor.h>
 
+#define XENO_TTY_MINOR 123
+
 /******************** Kernel console driver ********************************/
 
-static void kconsole_write(struct console *co, const char *s, unsigned count)
+static void xen_console_write(struct console *co, const char *s, unsigned count)
 {
 #define STRLEN 256
     static char str[STRLEN];
@@ -49,56 +51,57 @@ static void kconsole_write(struct console *co, const char *s, unsigned count)
     }
 }
 
-static kdev_t kconsole_device(struct console *c)
+static kdev_t xen_console_device(struct console *c)
 {
     /*
      * This is the magic that binds our "struct console" to our
      * "tty_struct", defined below.
      */
-    return MKDEV(TTY_MAJOR, 0);
+    return MKDEV(TTY_MAJOR, XENO_TTY_MINOR);
 }
 
-static struct console kconsole_info = {
-    name:		"xenocon",
-    write:		kconsole_write,
-    device:             kconsole_device,
+static struct console xen_console_info = {
+    name:		"xen_console",
+    write:		xen_console_write,
+    device:             xen_console_device,
     flags:		CON_PRINTBUFFER,
     index:		-1,
 };
 
-void xeno_console_init(void)
+void xen_console_init(void)
 {
-    register_console(&kconsole_info);
+  printk("xeno_console_init\n");
+  register_console(&xen_console_info);
 }
 
 
 /******************** Initial /dev/console *********************************/
 
 
-static struct tty_driver console_driver;
-static int console_refcount;
-static struct tty_struct *console_table[1];
-static struct termios *console_termios[1];
-static struct termios *console_termios_locked[1];
+static struct tty_driver xeno_console_driver;
+static int xeno_console_refcount;
+static struct tty_struct *xeno_console_table[1];
+static struct termios *xeno_console_termios[1];
+static struct termios *xeno_console_termios_locked[1];
 
-static int console_write_room(struct tty_struct *tty)
+static int xeno_console_write_room(struct tty_struct *tty)
 {
     return INT_MAX;
 }
 
-static int console_chars_in_buffer(struct tty_struct *tty)
+static int xeno_console_chars_in_buffer(struct tty_struct *tty)
 {
     return 0;
 }
 
-static inline int console_xmit(int ch)
+static inline int xeno_console_xmit(int ch)
 {
     char _ch = ch;
-    kconsole_write(NULL, &_ch, 1);
+    xen_console_write(NULL, &_ch, 1);
     return 1;
 }
 
-static int console_write(struct tty_struct *tty, int from_user,
+static int xeno_console_write(struct tty_struct *tty, int from_user,
                        const u_char * buf, int count)
 {
     int i;
@@ -119,17 +122,17 @@ static int console_write(struct tty_struct *tty, int from_user,
         {
             ch = buf[i];
         }
-        console_xmit(ch);
+        xeno_console_xmit(ch);
     }
     return i;
 }
 
-static void console_put_char(struct tty_struct *tty, u_char ch)
+static void xeno_console_put_char(struct tty_struct *tty, u_char ch)
 {
-    console_xmit(ch);
+    xeno_console_xmit(ch);
 }
 
-static int console_open(struct tty_struct *tty, struct file *filp)
+static int xeno_console_open(struct tty_struct *tty, struct file *filp)
 {
     int line;
 
@@ -146,37 +149,40 @@ static int console_open(struct tty_struct *tty, struct file *filp)
     return 0;
 }
 
-static void console_close(struct tty_struct *tty, struct file *filp)
+static void xeno_console_close(struct tty_struct *tty, struct file *filp)
 {
     MOD_DEC_USE_COUNT;
 }
 
-static int __init console_ini(void)
+int __init xeno_con_init(void)
 {
-    memset(&console_driver, 0, sizeof(struct tty_driver));
-    console_driver.magic           = TTY_DRIVER_MAGIC;
-    console_driver.driver_name     = "xeno_console";
-    console_driver.name            = "console";
-    console_driver.major           = TTY_MAJOR;
-    console_driver.minor_start     = 0;
-    console_driver.num             = 1;
-    console_driver.type            = TTY_DRIVER_TYPE_SERIAL;
-    console_driver.subtype         = SERIAL_TYPE_NORMAL;
-    console_driver.init_termios    = tty_std_termios;
-    console_driver.flags           = TTY_DRIVER_REAL_RAW;
-    console_driver.refcount        = &console_refcount;
-    console_driver.table           = console_table;
-    console_driver.termios         = console_termios;
-    console_driver.termios_locked  = console_termios_locked;
-    /* Functions */
-    console_driver.open            = console_open;
-    console_driver.close           = console_close;
-    console_driver.write           = console_write;
-    console_driver.write_room      = console_write_room;
-    console_driver.put_char        = console_put_char;
-    console_driver.chars_in_buffer = console_chars_in_buffer;
 
-    if ( tty_register_driver(&console_driver) )
+    printk("xeno_con_init\n");
+
+    memset(&xeno_console_driver, 0, sizeof(struct tty_driver));
+    xeno_console_driver.magic           = TTY_DRIVER_MAGIC;
+    xeno_console_driver.driver_name     = "xeno_console";
+    xeno_console_driver.name            = "xencon";
+    xeno_console_driver.major           = TTY_MAJOR;
+    xeno_console_driver.minor_start     = XENO_TTY_MINOR;
+    xeno_console_driver.num             = 1;
+    xeno_console_driver.type            = TTY_DRIVER_TYPE_SERIAL;
+    xeno_console_driver.subtype         = SERIAL_TYPE_NORMAL;
+    xeno_console_driver.init_termios    = tty_std_termios;
+    xeno_console_driver.flags           = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+    xeno_console_driver.refcount        = &xeno_console_refcount;
+    xeno_console_driver.table           = xeno_console_table;
+    xeno_console_driver.termios         = xeno_console_termios;
+    xeno_console_driver.termios_locked  = xeno_console_termios_locked;
+    /* Functions */
+    xeno_console_driver.open            = xeno_console_open;
+    xeno_console_driver.close           = xeno_console_close;
+    xeno_console_driver.write           = xeno_console_write;
+    xeno_console_driver.write_room      = xeno_console_write_room;
+    xeno_console_driver.put_char        = xeno_console_put_char;
+    xeno_console_driver.chars_in_buffer = xeno_console_chars_in_buffer;
+
+    if ( tty_register_driver(&xeno_console_driver) )
     {
         printk(KERN_ERR "Couldn't register Xeno console driver\n");
     }
@@ -188,17 +194,17 @@ static int __init console_ini(void)
     return 0;
 }
 
-static void __exit console_fin(void)
+void __exit xeno_con_fini(void)
 {
     int ret;
 
-    ret = tty_unregister_driver(&console_driver);
+    ret = tty_unregister_driver(&xeno_console_driver);
     if ( ret != 0 )
     {
         printk(KERN_ERR "Unable to unregister Xeno console driver: %d\n", ret);
     }
 }
 
-module_init(console_ini);
-module_exit(console_fin);
+module_init(xeno_con_init);
+module_exit(xeno_con_fini);
 

xenolinux-2.4.21-pre4-sparse/arch/xeno/kernel/setup.c

@@ -163,8 +163,16 @@ void __init setup_arch(char **cmdline_p)
     ROOT_DEV = MKDEV(RAMDISK_MAJOR,0);
     memset(&drive_info, 0, sizeof(drive_info));
     memset(&screen_info, 0, sizeof(screen_info));
+    // this is drawn from a dump from vgacon:startup in standard linux
+    screen_info.orig_video_mode = 3; 
+    screen_info.orig_video_isVGA = 1;
+    screen_info.orig_video_lines = 25;
+    screen_info.orig_video_cols = 80;
+    screen_info.orig_video_ega_bx = 3;
+    screen_info.orig_video_points = 16;
+
     memset(&apm_info.bios, 0, sizeof(apm_info.bios));
-    aux_device_present = 0;
+    aux_device_present = 0; 
 #ifdef CONFIG_BLK_DEV_RAM
     rd_image_start = 0;
     rd_prompt = 0;
@@ -292,6 +300,27 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
     paging_init();
+
+    if(start_info.flags & SIF_PRIVILEGED) {
+      // we are privileged guest os - should be able to set IOPL
+      if(HYPERVISOR_iopl(1)) {
+	panic("Unable to obtain IOPL, despite being SIF_PRIVILEGED");
+      }
+
+    }
+
+    if(start_info.flags & SIF_CONSOLE) {
+      if(!(start_info.flags & SIF_PRIVILEGED)) {
+	panic("Xen granted us console access but not privileged status");
+      }
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+      conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+      conswitchp = &dummy_con;
+#endif
+#endif
+    }
 }
 
 static int cachesize_override __initdata = -1;

xenolinux-2.4.21-pre4-sparse/drivers/char/Config.in

@@ -4,18 +4,22 @@
 mainmenu_option next_comment
 comment 'Character devices'
 
+bool 'Xen console support' CONFIG_XEN_CONSOLE
+comment 'The options below are alpha-stage and will probably not work'
 bool 'Virtual terminal' CONFIG_VT
-if [ "$CONFIG_VT" = "n" ]; then
-   bool 'Dummy Console (to allow kbd/mouse testing without VTs)' CONFIG_DUMMY_CONSOLE
-fi   
-
-bool 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
+if [ "$CONFIG_VT" = "y" ]; then
+   bool '  Support for console on virtual terminal' CONFIG_VT_CONSOLE
+   bool '  Support for VGA Video' CONFIG_VGA_CONSOLE
+   bool '  Support for Dummy Video (for testing)' CONFIG_DUMMY_CONSOLE
+   bool '  PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
+fi
 
 bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
 if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
    int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
 fi
 
+
 endmenu
 
 # KEPT IN CASE WE WANT TO BRING SOME BACK...

xenolinux-2.4.21-pre4-sparse/drivers/char/Makefile

@@ -1,339 +0,0 @@
-#
-# Makefile for the kernel character device drivers.
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# XENO INFO - this is just copied from the linux one
-# and most is irrelevant for xenolinux and can go.
-# (see Config.in for the relevant bits)
-# JWS - added dummy_console to test ps2 functionality
-
-
-#
-# This file contains the font map for the default (hardware) font
-#
-FONTMAPFILE = cp437.uni
-
-O_TARGET := char.o
-
-obj-y	 += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o
-
-# All of the (potential) objects that export symbols.
-# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-
-export-objs     :=	busmouse.o console.o keyboard.o sysrq.o \
-			misc.o pty.o random.o selection.o serial.o \
-			sonypi.o tty_io.o tty_ioctl.o generic_serial.o \
-			au1000_gpio.o hp_psaux.o nvram.o dummy_console.o
-
-mod-subdirs	:=	joystick ftape drm drm-4.0 pcmcia
-
-list-multi	:=	
-
-KEYMAP   =defkeymap.o
-KEYBD    =pc_keyb.o
-CONSOLE  =console.o
-SERIAL   =serial.o
-
-ifeq ($(ARCH),s390)
-  KEYMAP   =
-  KEYBD    =
-  CONSOLE  =
-  SERIAL   =
-endif
-
-ifeq ($(ARCH),mips)
-  ifneq ($(CONFIG_PC_KEYB),y)
-    KEYBD    =
-  endif
-endif
-
-ifeq ($(ARCH),s390x)
-  KEYMAP   =
-  KEYBD    =
-  CONSOLE  =
-  SERIAL   =
-endif
-
-ifeq ($(ARCH),m68k)
-   ifdef CONFIG_AMIGA
-      KEYBD = amikeyb.o
-   else
-      ifndef CONFIG_MAC
-	 KEYBD =
-      endif
-   endif
-   SERIAL   =
-endif
-
-ifeq ($(ARCH),parisc)
-   ifdef CONFIG_GSC_PS2
-      KEYBD   = hp_psaux.o hp_keyb.o
-   else
-      KEYBD   =
-   endif
-   ifdef CONFIG_SERIAL_MUX
-      CONSOLE += mux.o
-   endif
-   ifdef CONFIG_PDC_CONSOLE
-      CONSOLE += pdc_console.o
-   endif
-endif
-
-ifdef CONFIG_Q40
-  KEYBD += q40_keyb.o
-  SERIAL = serial.o
-endif
-
-ifdef CONFIG_APOLLO
-  KEYBD += dn_keyb.o
-endif
-
-ifeq ($(ARCH),parisc)
-   ifdef CONFIG_GSC_PS2
-      KEYBD   = hp_psaux.o hp_keyb.o
-   else
-      KEYBD   =
-   endif
-   ifdef CONFIG_PDC_CONSOLE
-      CONSOLE += pdc_console.o
-   endif
-endif
-
-ifeq ($(ARCH),arm)
-  ifneq ($(CONFIG_PC_KEYMAP),y)
-    KEYMAP   =
-  endif
-  ifneq ($(CONFIG_PC_KEYB),y)
-    KEYBD    =
-  endif
-endif
-
-ifeq ($(ARCH),sh)
-  KEYMAP   =
-  KEYBD    =
-  CONSOLE  =
-  ifeq ($(CONFIG_SH_HP600),y)
-  KEYMAP   = defkeymap.o
-  KEYBD    = scan_keyb.o hp600_keyb.o
-  CONSOLE  = console.o
-  endif
-  ifeq ($(CONFIG_SH_DMIDA),y)
-  # DMIDA does not connect the HD64465 PS/2 keyboard port
-  # but we allow for USB keyboards to be plugged in.
-  KEYMAP   = defkeymap.o
-  KEYBD    = # hd64465_keyb.o pc_keyb.o
-  CONSOLE  = console.o
-  endif
-  ifeq ($(CONFIG_SH_EC3104),y)
-  KEYMAP   = defkeymap.o
-  KEYBD    = ec3104_keyb.o
-  CONSOLE  = console.o
-  endif
-  ifeq ($(CONFIG_SH_DREAMCAST),y)
-  KEYMAP   = defkeymap.o
-  KEYBD    =
-  CONSOLE  = console.o
-  endif
-endif
-
-ifeq ($(CONFIG_DECSTATION),y)
-  KEYMAP   =
-  KEYBD    =
-  SERIAL   = decserial.o
-endif
-
-ifeq ($(CONFIG_BAGET_MIPS),y)
-  KEYBD    =
-  SERIAL   =
-endif
-
-ifeq ($(CONFIG_NINO),y)
-  SERIAL   =
-endif
-
-ifneq ($(CONFIG_SUN_SERIAL),)
-  SERIAL   =
-endif
-
-ifeq ($(CONFIG_QTRONIX_KEYBOARD),y)
-  KEYBD    = qtronix.o
-  KEYMAP   = qtronixmap.o
-endif
-
-ifeq ($(CONFIG_DUMMY_KEYB),y)
-  KEYBD = dummy_keyb.o
-endif
-
-obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o $(CONSOLE) selection.o
-
-ifeq ($(CONFIG_VT),)
-  obj-$(CONFIG_DUMMY_CONSOLE) += $(KEYBD) dummy_console.o
-endif
-
-obj-$(CONFIG_SERIAL) += $(SERIAL)
-obj-$(CONFIG_SERIAL_HCDP) += hcdp_serial.o
-obj-$(CONFIG_SERIAL_21285) += serial_21285.o
-obj-$(CONFIG_SERIAL_SA1100) += serial_sa1100.o
-obj-$(CONFIG_SERIAL_AMBA) += serial_amba.o
-obj-$(CONFIG_TS_AU1000_ADS7846) += au1000_ts.o
-
-ifndef CONFIG_SUN_KEYBOARD
-  obj-$(CONFIG_VT) += keyboard.o $(KEYMAP) $(KEYBD)
-else
-  obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP)
-endif
-
-obj-$(CONFIG_HIL) += hp_keyb.o
-obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
-obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
-obj-$(CONFIG_ROCKETPORT) += rocket.o
-obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
-obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
-obj-$(CONFIG_DIGI) += pcxx.o
-obj-$(CONFIG_DIGIEPCA) += epca.o
-obj-$(CONFIG_CYCLADES) += cyclades.o
-obj-$(CONFIG_STALLION) += stallion.o
-obj-$(CONFIG_ISTALLION) += istallion.o
-obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o
-obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
-obj-$(CONFIG_RISCOM8) += riscom8.o
-obj-$(CONFIG_ISI) += isicom.o
-obj-$(CONFIG_ESPSERIAL) += esp.o
-obj-$(CONFIG_SYNCLINK) += synclink.o
-obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
-obj-$(CONFIG_N_HDLC) += n_hdlc.o
-obj-$(CONFIG_SPECIALIX) += specialix.o
-obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
-obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
-obj-$(CONFIG_SX) += sx.o generic_serial.o
-obj-$(CONFIG_RIO) += rio/rio.o generic_serial.o
-obj-$(CONFIG_SH_SCI) += sh-sci.o generic_serial.o
-obj-$(CONFIG_SERIAL167) += serial167.o
-obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o
-obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o
-obj-$(CONFIG_TXX927_SERIAL) += serial_txx927.o
-
-subdir-$(CONFIG_RIO) += rio
-subdir-$(CONFIG_INPUT) += joystick
-
-obj-$(CONFIG_ATIXL_BUSMOUSE) += atixlmouse.o
-obj-$(CONFIG_LOGIBUSMOUSE) += logibusmouse.o
-obj-$(CONFIG_PRINTER) += lp.o
-obj-$(CONFIG_TIPAR) += tipar.o
-
-ifeq ($(CONFIG_INPUT),y)
-obj-y += joystick/js.o
-endif
-
-obj-$(CONFIG_BUSMOUSE) += busmouse.o
-obj-$(CONFIG_DTLK) += dtlk.o
-obj-$(CONFIG_R3964) += n_r3964.o
-obj-$(CONFIG_APPLICOM) += applicom.o
-obj-$(CONFIG_SONYPI) += sonypi.o
-obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o
-obj-$(CONFIG_82C710_MOUSE) += qpmouse.o
-obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o
-obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
-obj-$(CONFIG_ADBMOUSE) += adbmouse.o
-obj-$(CONFIG_PC110_PAD) += pc110pad.o
-obj-$(CONFIG_MK712_MOUSE) += mk712.o
-obj-$(CONFIG_RTC) += rtc.o
-obj-$(CONFIG_EFI_RTC) += efirtc.o
-ifeq ($(CONFIG_PPC),)
-  obj-$(CONFIG_NVRAM) += nvram.o
-endif
-obj-$(CONFIG_TOSHIBA) += toshiba.o
-obj-$(CONFIG_I8K) += i8k.o
-obj-$(CONFIG_DS1620) += ds1620.o
-obj-$(CONFIG_INTEL_RNG) += i810_rng.o
-obj-$(CONFIG_AMD_RNG) += amd768_rng.o
-obj-$(CONFIG_AMD_PM768) += amd76x_pm.o
-
-obj-$(CONFIG_ITE_GPIO) += ite_gpio.o
-obj-$(CONFIG_AU1000_GPIO) += au1000_gpio.o
-obj-$(CONFIG_COBALT_LCD) += lcd.o
-
-obj-$(CONFIG_QIC02_TAPE) += tpqic02.o
-
-subdir-$(CONFIG_FTAPE) += ftape
-subdir-$(CONFIG_DRM_OLD) += drm-4.0
-subdir-$(CONFIG_DRM_NEW) += drm
-subdir-$(CONFIG_PCMCIA) += pcmcia
-subdir-$(CONFIG_AGP) += agp
-
-ifeq ($(CONFIG_FTAPE),y)
-obj-y       += ftape/ftape.o
-endif
-
-obj-$(CONFIG_H8) += h8.o
-obj-$(CONFIG_PPDEV) += ppdev.o
-obj-$(CONFIG_DZ) += dz.o
-obj-$(CONFIG_NWBUTTON) += nwbutton.o
-obj-$(CONFIG_NWFLASH) += nwflash.o
-obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o scx200.o
-
-# Only one watchdog can succeed. We probe the hardware watchdog
-# drivers first, then the softdog driver.  This means if your hardware
-# watchdog dies or is 'borrowed' for some reason the software watchdog
-# still gives you some cover.
-
-obj-$(CONFIG_PCWATCHDOG) += pcwd.o
-obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
-obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
-obj-$(CONFIG_IB700_WDT) += ib700wdt.o
-obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
-obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
-obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
-obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
-obj-$(CONFIG_WDT) += wdt.o
-obj-$(CONFIG_WDTPCI) += wdt_pci.o
-obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
-obj-$(CONFIG_977_WATCHDOG) += wdt977.o
-obj-$(CONFIG_I810_TCO) += i810-tco.o
-obj-$(CONFIG_MACHZ_WDT) += machzwd.o
-obj-$(CONFIG_SH_WDT) += shwdt.o
-obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
-obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
-#obj-$(CONFIG_ALIM1535_WDT) += alim1535d_wdt.o
-obj-$(CONFIG_INDYDOG) += indydog.o
-obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
-obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
-obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
-obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
-obj-$(CONFIG_AMD7XX_TCO) += amd7xx_tco.o
-
-subdir-$(CONFIG_MWAVE) += mwave
-ifeq ($(CONFIG_MWAVE),y)
-  obj-y += mwave/mwave.o
-endif
-
-subdir-$(CONFIG_IPMI_HANDLER) += ipmi
-ifeq ($(CONFIG_IPMI_HANDLER),y)
-  obj-y += ipmi/ipmi.o
-endif
-
-include $(TOPDIR)/Rules.make
-
-fastdep:
-
-conmakehash: conmakehash.c
-	$(HOSTCC) $(HOSTCFLAGS) -o conmakehash conmakehash.c
-
-consolemap_deftbl.c: $(FONTMAPFILE) conmakehash
-	./conmakehash $(FONTMAPFILE) > consolemap_deftbl.c
-
-consolemap_deftbl.o: consolemap_deftbl.c $(TOPDIR)/include/linux/types.h
-
-.DELETE_ON_ERROR:
-
-defkeymap.c: defkeymap.map
-	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
-
-qtronixmap.c: qtronixmap.map
-	set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@

xenolinux-2.4.21-pre4-sparse/drivers/char/tty_io.c

@@ -102,8 +102,8 @@
 
 #include <linux/kmod.h>
 
-#ifdef CONFIG_XENO
-extern void xeno_console_init(void);
+#ifdef CONFIG_XEN_CONSOLE
+extern void xen_console_init(void);
 #endif
 
 #ifdef CONFIG_VT
@@ -817,8 +817,9 @@ static int init_dev(kdev_t device, struct tty_struct **ret_tty)
 	int idx;
 
 	driver = get_tty_driver(device);
-	if (!driver)
-		return -ENODEV;
+	if (!driver) {
+	  return -ENODEV;
+	}
 
 	idx = MINOR(device) - driver->minor_start;
 
@@ -2186,7 +2187,7 @@ int tty_unregister_driver(struct tty_driver *driver)
  */
 void __init console_init(void)
 {
-	/* Setup the default TTY line discipline. */
+        /* Setup the default TTY line discipline. */
 	memset(ldiscs, 0, sizeof(ldiscs));
 	(void) tty_register_ldisc(N_TTY, &tty_ldisc_N_TTY);
 
@@ -2209,9 +2210,14 @@ void __init console_init(void)
 #ifdef CONFIG_EARLY_PRINTK
 	disable_early_printk(); 
 #endif
+
 #ifdef CONFIG_VT
 	con_init();
 #endif
+
+#ifdef CONFIG_XEN_CONSOLE
+	xen_console_init();
+#endif
 #ifdef CONFIG_AU1000_SERIAL_CONSOLE
 	au1000_serial_console_init();
 #endif
@@ -2326,9 +2332,6 @@ void __init tty_init(void)
 	/* console calls tty_register_driver() before kmalloc() works.
 	 * Thus, we can't devfs_register() then.  Do so now, instead. 
 	 */
-#ifdef CONFIG_XENO
-        xeno_console_init();
-#endif
 #ifdef CONFIG_VT
 	con_init_devfs();
 #endif
@@ -2358,11 +2361,6 @@ void __init tty_init(void)
 		panic("Couldn't register /dev/tty0 driver\n");
 
 	kbd_init();
-#else
-	// the below is a dodgy hack to allow keyboard/mouse support without the console support, along with the file "dummy_console.c"
-#ifdef CONFIG_DUMMY_CONSOLE
-	kbd_init();
-#endif
 #endif
 
 #ifdef CONFIG_ESPSERIAL  /* init ESP before rs, so rs doesn't see the port */