x86: Split cache_flush() out of cache_writeback()

Subsequent changes will want a fully flushing version.

Use the new helper rather than opencoding it in flush_area_local().  This
resolves an outstanding issue where the conditional sfence is on the wrong
side of the clflushopt loop.  clflushopt is ordered with respect to older
stores, not to younger stores.

Rename gnttab_cache_flush()'s helper to avoid colliding in name.
grant_table.c can see the prototype from cache.h so the build fails
otherwise.

This is part of XSA-402.

Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 9a67ffee33
master date: 2022-06-09 14:22:38 +0200
This commit is contained in:
Andrew Cooper authored and Jan Beulich committed 2022-06-09 15:36:40 +02:00
1 parent 9b1e1e74a6
commit 78fd76e188
6 files changed
+88 -66

No files matched your search

+76 -8
View File
@@ -234,7 +234,7 @@ unsigned int flush_area_local(const void *va, unsigned int flags)
if ( flags & FLUSH_CACHE )
{
const struct cpuinfo_x86 *c = &current_cpu_data;
unsigned long i, sz = 0;
unsigned long sz = 0;
if ( order < (BITS_PER_LONG - PAGE_SHIFT) )
sz = 1UL << (order + PAGE_SHIFT);
@@ -244,13 +244,7 @@ unsigned int flush_area_local(const void *va, unsigned int flags)
c->x86_clflush_size && c->x86_cache_size && sz &&
((sz >> 10) < c->x86_cache_size) )
{
alternative("", "sfence", X86_FEATURE_CLFLUSHOPT);
for ( i = 0; i < sz; i += c->x86_clflush_size )
alternative_input(".byte " __stringify(NOP_DS_PREFIX) ";"
" clflush %0",
"data16 clflush %0", /* clflushopt */
X86_FEATURE_CLFLUSHOPT,
"m" (((const char *)va)[i]));
cache_flush(va, sz);
flags &= ~FLUSH_CACHE;
}
else
@@ -265,6 +259,80 @@ unsigned int flush_area_local(const void *va, unsigned int flags)
return flags;
}
void cache_flush(const void *addr, unsigned int size)
{
/*
* This function may be called before current_cpu_data is established.
* Hence a fallback is needed to prevent the loop below becoming infinite.
*/
unsigned int clflush_size = current_cpu_data.x86_clflush_size ?: 16;
const void *end = addr + size;
addr -= (unsigned long)addr & (clflush_size - 1);
for ( ; addr < end; addr += clflush_size )
{
/*
* Note regarding the "ds" prefix use: it's faster to do a clflush
* + prefix than a clflush + nop, and hence the prefix is added instead
* of letting the alternative framework fill the gap by appending nops.
*/
alternative_io("ds; clflush %[p]",
"data16 clflush %[p]", /* clflushopt */
X86_FEATURE_CLFLUSHOPT,
/* no outputs */,
[p] "m" (*(const char *)(addr)));
}
alternative("", "sfence", X86_FEATURE_CLFLUSHOPT);
}
void cache_writeback(const void *addr, unsigned int size)
{
unsigned int clflush_size;
const void *end = addr + size;
/* Fall back to CLFLUSH{,OPT} when CLWB isn't available. */
if ( !boot_cpu_has(X86_FEATURE_CLWB) )
return cache_flush(addr, size);
/*
* This function may be called before current_cpu_data is established.
* Hence a fallback is needed to prevent the loop below becoming infinite.
*/
clflush_size = current_cpu_data.x86_clflush_size ?: 16;
addr -= (unsigned long)addr & (clflush_size - 1);
for ( ; addr < end; addr += clflush_size )
{
/*
* The arguments to a macro must not include preprocessor directives. Doing so
* results in undefined behavior, so we have to create some defines here in
* order to avoid it.
*/
#if defined(HAVE_AS_CLWB)
# define CLWB_ENCODING "clwb %[p]"
#elif defined(HAVE_AS_XSAVEOPT)
# define CLWB_ENCODING "data16 xsaveopt %[p]" /* clwb */
#else
# define CLWB_ENCODING ".byte 0x66, 0x0f, 0xae, 0x30" /* clwb (%%rax) */
#endif
#define BASE_INPUT(addr) [p] "m" (*(const char *)(addr))
#if defined(HAVE_AS_CLWB) || defined(HAVE_AS_XSAVEOPT)
# define INPUT BASE_INPUT
#else
# define INPUT(addr) "a" (addr), BASE_INPUT(addr)
#endif
asm volatile (CLWB_ENCODING :: INPUT(addr));
#undef INPUT
#undef BASE_INPUT
#undef CLWB_ENCODING
}
asm volatile ("sfence" ::: "memory");
}
unsigned int guest_flush_tlb_flags(const struct domain *d)
{
bool shadow = paging_mode_shadow(d);
+2 -2
View File
@@ -3423,7 +3423,7 @@ gnttab_swap_grant_ref(XEN_GUEST_HANDLE_PARAM(gnttab_swap_grant_ref_t) uop,
return 0;
}
static int cache_flush(const gnttab_cache_flush_t *cflush, grant_ref_t *cur_ref)
static int _cache_flush(const gnttab_cache_flush_t *cflush, grant_ref_t *cur_ref)
{
struct domain *d, *owner;
struct page_info *page;
@@ -3517,7 +3517,7 @@ gnttab_cache_flush(XEN_GUEST_HANDLE_PARAM(gnttab_cache_flush_t) uop,
return -EFAULT;
for ( ; ; )
{
int ret = cache_flush(&op, cur_ref);
int ret = _cache_flush(&op, cur_ref);
if ( ret < 0 )
return ret;
-1
View File
@@ -76,7 +76,6 @@ int __must_check qinval_device_iotlb_sync(struct vtd_iommu *iommu,
struct pci_dev *pdev,
u16 did, u16 size, u64 addr);
unsigned int get_cache_line_size(void);
void flush_all_cache(void);
uint64_t alloc_pgtable_maddr(unsigned long npages, nodeid_t node);
+3 -50
View File
@@ -31,6 +31,7 @@
#include <xen/pci.h>
#include <xen/pci_regs.h>
#include <xen/keyhandler.h>
#include <asm/cache.h>
#include <asm/msi.h>
#include <asm/nops.h>
#include <asm/irq.h>
@@ -204,54 +205,6 @@ static void check_cleanup_domid_map(struct domain *d,
}
}
static void sync_cache(const void *addr, unsigned int size)
{
static unsigned long clflush_size = 0;
const void *end = addr + size;
if ( clflush_size == 0 )
clflush_size = get_cache_line_size();
addr -= (unsigned long)addr & (clflush_size - 1);
for ( ; addr < end; addr += clflush_size )
/*
* The arguments to a macro must not include preprocessor directives. Doing so
* results in undefined behavior, so we have to create some defines here in
* order to avoid it.
*/
#if defined(HAVE_AS_CLWB)
# define CLWB_ENCODING "clwb %[p]"
#elif defined(HAVE_AS_XSAVEOPT)
# define CLWB_ENCODING "data16 xsaveopt %[p]" /* clwb */
#else
# define CLWB_ENCODING ".byte 0x66, 0x0f, 0xae, 0x30" /* clwb (%%rax) */
#endif
#define BASE_INPUT(addr) [p] "m" (*(const char *)(addr))
#if defined(HAVE_AS_CLWB) || defined(HAVE_AS_XSAVEOPT)
# define INPUT BASE_INPUT
#else
# define INPUT(addr) "a" (addr), BASE_INPUT(addr)
#endif
/*
* Note regarding the use of NOP_DS_PREFIX: it's faster to do a clflush
* + prefix than a clflush + nop, and hence the prefix is added instead
* of letting the alternative framework fill the gap by appending nops.
*/
alternative_io_2(".byte " __stringify(NOP_DS_PREFIX) "; clflush %[p]",
"data16 clflush %[p]", /* clflushopt */
X86_FEATURE_CLFLUSHOPT,
CLWB_ENCODING,
X86_FEATURE_CLWB, /* no outputs */,
INPUT(addr));
#undef INPUT
#undef BASE_INPUT
#undef CLWB_ENCODING
alternative_2("", "sfence", X86_FEATURE_CLFLUSHOPT,
"sfence", X86_FEATURE_CLWB);
}
/* Allocate page table, return its machine address */
uint64_t alloc_pgtable_maddr(unsigned long npages, nodeid_t node)
{
@@ -271,7 +224,7 @@ uint64_t alloc_pgtable_maddr(unsigned long npages, nodeid_t node)
clear_page(vaddr);
if ( (iommu_ops.init ? &iommu_ops : &vtd_ops)->sync_cache )
sync_cache(vaddr, PAGE_SIZE);
cache_writeback(vaddr, PAGE_SIZE);
unmap_domain_page(vaddr);
cur_pg++;
}
@@ -1302,7 +1255,7 @@ int __init iommu_alloc(struct acpi_drhd_unit *drhd)
iommu->nr_pt_levels = agaw_to_level(agaw);
if ( !ecap_coherent(iommu->ecap) )
vtd_ops.sync_cache = sync_cache;
vtd_ops.sync_cache = cache_writeback;
/* allocate domain id bitmap */
iommu->domid_bitmap = xzalloc_array(unsigned long, BITS_TO_LONGS(nr_dom));
-5
View File
@@ -47,11 +47,6 @@ void unmap_vtd_domain_page(const void *va)
unmap_domain_page(va);
}
unsigned int get_cache_line_size(void)
{
return ((cpuid_ebx(1) >> 8) & 0xff) * 8;
}
void flush_all_cache()
{
wbinvd();
+7
View File
@@ -11,4 +11,11 @@
#define __read_mostly __section(".data.read_mostly")
#ifndef __ASSEMBLY__
void cache_flush(const void *addr, unsigned int size);
void cache_writeback(const void *addr, unsigned int size);
#endif
#endif
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.