xen/arm: introduce vexpress_syscfg

Introduce a Versatile Express specific function to read/write
motherboard settings.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>

xen/arch/arm/Makefile

@@ -1,4 +1,5 @@
 subdir-$(arm32) += arm32
+subdir-y += platforms
 
 obj-y += early_printk.o
 obj-y += domain.o

xen/arch/arm/arm32/mode_switch.S

@@ -19,7 +19,7 @@
 
 #include <asm/config.h>
 #include <asm/page.h>
-#include <asm/platform_vexpress.h>
+#include <asm/platforms/vexpress.h>
 #include <asm/asm_defns.h>
 #include <asm/gic.h>
 

xen/arch/arm/platforms/Makefile

@@ -0,0 +1 @@
+obj-y += vexpress.o

xen/arch/arm/platforms/vexpress.c

@@ -0,0 +1,100 @@
+/*
+ * xen/arch/arm/platform_vexpress.c
+ *
+ * Versatile Express specific settings
+ *
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>
+ * Copyright (c) 2013 Citrix Systems.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/platforms/vexpress.h>
+#include <xen/mm.h>
+
+#define DCC_SHIFT      26
+#define FUNCTION_SHIFT 20
+#define SITE_SHIFT     16
+#define POSITION_SHIFT 12
+#define DEVICE_SHIFT   0
+
+static inline int vexpress_ctrl_start(uint32_t *syscfg, int write,
+                                      int function, int device)
+{
+    int dcc = 0; /* DCC to access */
+    int site = 0; /* motherboard */
+    int position = 0; /* daughterboard */
+    uint32_t stat;
+
+    /* set control register */
+    syscfg[V2M_SYS_CFGCTRL/4] = V2M_SYS_CFG_START |
+        (write ? V2M_SYS_CFG_WRITE : 0) |
+        (dcc << DCC_SHIFT) | (function << FUNCTION_SHIFT) |
+        (site << SITE_SHIFT) | (position << POSITION_SHIFT) |
+        (device << DEVICE_SHIFT);
+
+    /* wait for complete flag to be set */
+    do {
+        stat = syscfg[V2M_SYS_CFGSTAT/4];
+        dsb();
+    } while ( !(stat & V2M_SYS_CFG_COMPLETE) );
+
+    /* check error status and return error flag if set */
+    if ( stat & V2M_SYS_CFG_ERROR )
+    {
+        printk(KERN_ERR "V2M SYS_CFGSTAT reported a configuration error\n");
+        return -1;
+    }
+    return 0;
+}
+
+int vexpress_syscfg(int write, int function, int device, uint32_t *data)
+{
+    uint32_t *syscfg = (uint32_t *) FIXMAP_ADDR(FIXMAP_MISC);
+    int ret = -1;
+
+    set_fixmap(FIXMAP_MISC, V2M_SYS_MMIO_BASE >> PAGE_SHIFT, DEV_SHARED);
+
+    if ( syscfg[V2M_SYS_CFGCTRL/4] & V2M_SYS_CFG_START )
+        goto out;
+
+    /* clear the complete bit in the V2M_SYS_CFGSTAT status register */
+    syscfg[V2M_SYS_CFGSTAT/4] = 0;
+
+    if ( write )
+    {
+        /* write data */
+        syscfg[V2M_SYS_CFGDATA/4] = *data;
+
+        if ( vexpress_ctrl_start(syscfg, write, function, device) < 0 )
+            goto out;
+    } else {
+        if ( vexpress_ctrl_start(syscfg, write, function, device) < 0 )
+            goto out;
+        else
+            /* read data */
+            *data = syscfg[V2M_SYS_CFGDATA/4];
+    }
+
+    ret = 0;
+out:
+    clear_fixmap(FIXMAP_MISC);
+    return ret;
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-set-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */

xen/include/asm-arm/platform_vexpress.h

@@ -1,17 +0,0 @@
-#ifndef __ASM_ARM_PLATFORM_H
-#define __ASM_ARM_PLATFORM_H
-
-/* V2M */
-#define V2M_SYS_MMIO_BASE     (0x1c010000)
-#define V2M_SYS_FLAGSSET      (0x30)
-#define V2M_SYS_FLAGSCLR      (0x34)
-
-#endif /* __ASM_ARM_PLATFORM_H */
-/*
- * Local variables:
- * mode: C
- * c-set-style: "BSD"
- * c-basic-offset: 4
- * indent-tabs-mode: nil
- * End:
- */

xen/include/asm-arm/platforms/vexpress.h

@@ -0,0 +1,40 @@
+#ifndef __ASM_ARM_PLATFORMS_VEXPRESS_H
+#define __ASM_ARM_PLATFORMS_VEXPRESS_H
+
+/* V2M */
+#define V2M_SYS_MMIO_BASE     (0x1c010000)
+#define V2M_SYS_FLAGSSET      (0x30)
+#define V2M_SYS_FLAGSCLR      (0x34)
+
+#define V2M_SYS_CFGDATA       (0x00A0)
+#define V2M_SYS_CFGCTRL       (0x00A4)
+#define V2M_SYS_CFGSTAT       (0x00A8)
+
+#define V2M_SYS_CFG_START     (1<<31)
+#define V2M_SYS_CFG_WRITE     (1<<30)
+#define V2M_SYS_CFG_ERROR     (1<<1)
+#define V2M_SYS_CFG_COMPLETE  (1<<0)
+
+#define V2M_SYS_CFG_OSC_FUNC  1
+#define V2M_SYS_CFG_OSC0      0
+#define V2M_SYS_CFG_OSC1      1
+#define V2M_SYS_CFG_OSC2      2
+#define V2M_SYS_CFG_OSC3      3
+#define V2M_SYS_CFG_OSC4      4
+#define V2M_SYS_CFG_OSC5      5
+
+#ifndef __ASSEMBLY__
+#include <xen/inttypes.h>
+
+int vexpress_syscfg(int write, int function, int device, uint32_t *data);
+#endif
+
+#endif /* __ASM_ARM_PLATFORMS_VEXPRESS_H */
+/*
+ * Local variables:
+ * mode: C
+ * c-set-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */