Except for an additional prereq Arm and x86 have the same needs here,
and Arm can also benefit from the recent x86 side improvement. Recurse
into arch/*/ only for a phony include target (doing nothing on Arm),
and handle asm-offsets itself entirely locally to xen/Makefile.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
NetBSD doens't need xenbackendd with xl toolstack so don't build it.
Remove now unused xenbackendd directory/files, and remaining references
in the hotplug scripts.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
[Also clean up stale comments in the Linux xencommons script]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
memshrtool is a tool for a human to use, rather than a test. Move it into
misc/ as a more appropriate location to live. Also rename it to
xen-memshare
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
xen-access is a tool for a human to use, rather than a test. Move it
into misc/ as a more appropriate location to live.
Move the -DXC_WANT_COMPAT_DEVICEMODEL_API from CFLAGS into xen-access.c itself
to avoid adding Makefile complexity.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
The python unit tests were dropped in Xen 4.12 due to being obsolete, but the
scripts to run the tests were missed. Clean up .gitignore as well.
Also drop the libxenctrl {C,LD}FLAGS adjustments in the Makefile. This logic
isn't used, and isn't appropriate even in principle, as there are tests in
here which don't want to use libxenctrl.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Instead of each library having an own include directory move the
official headers to tools/include instead. This will drop the need to
link those headers to tools/include and there is no need any longer
to have library-specific include paths when building Xen.
While at it remove setting of the unused variable
PKG_CONFIG_CFLAGS_LOCAL in libs/*/Makefile.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Tested-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Add a PVH xenstore stubdom in order to support a Xenstore stubdom on
a hypervisor built without PV-support.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Wei Liu <wl@xen.org>
This patch adds support for bundling the xen.efi hypervisor, the xen.cfg
configuration file, the Linux kernel and initrd, as well as the XSM,
and architectural specific files into a single "unified" EFI executable.
This allows an administrator to update the components independently
without requiring rebuilding xen, as well as to replace the components
in an existing image.
The resulting EFI executable can be invoked directly from the UEFI Boot
Manager, removing the need to use a separate loader like grub as well
as removing dependencies on local filesystem access. And since it is
a single file, it can be signed and validated by UEFI Secure Boot without
requring the shim protocol.
It is inspired by systemd-boot's unified kernel technique and borrows the
function to locate PE sections from systemd's LGPL'ed code. During EFI
boot, Xen looks at its own loaded image to locate the PE sections for
the Xen configuration (`.config`), dom0 kernel (`.kernel`), dom0 initrd
(`.ramdisk`), and XSM config (`.xsm`), which are included after building
xen.efi using objcopy to add named sections for each input file.
For x86, the CPU ucode can be included in a section named `.ucode`,
which is loaded in the efi_arch_cfg_file_late() stage of the boot process.
On ARM systems the Device Tree can be included in a section named
`.dtb`, which is loaded during the efi_arch_cfg_file_early() stage of
the boot process.
Note that the system will fall back to loading files from disk if
the named sections do not exist. This allows distributions to continue
with the status quo if they want a signed kernel + config, while still
allowing a user provided initrd (which is how the shim protocol currently
works as well).
This patch also adds constness to the section parameter of
efi_arch_cfg_file_early() and efi_arch_cfg_file_late(),
changes pe_find_section() to use a const CHAR16 section name,
and adds pe_name_compare() to match section names.
Signed-off-by: Trammell Hudson <hudson@trmm.net>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
[Fix ARM build by including pe.init.o]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Carve out all libxenlight related sources and move them to
tools/libs/light in order to use the generic library build environment.
The closely related sources for libxl-save-helper and the libxl test
environment are being moved, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
There is no reason why libxenstat is not placed in the tools/libs
directory.
At the same time move xenstat.h to a dedicated include directory
in tools/libs/stat in order to follow the same pattern as the other
libraries in tools/libs.
As now xentop is the only left directory in xenstat move it directly
under tools and get rid of tools/xenstat.
Fix some missing prototype errors (add one prototype and make two
functions static).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
There is no reason why libvchan is not placed in the tools/libs
directory.
At the same time move libxenvchan.h to a dedicated include directory
in tools/libs/vchan in order to follow the same pattern as the other
libraries in tools/libs.
As tools/libvchan now contains no library any longer rename it to
tools/vchan.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
There is no reason why libxenstore is not placed in the tools/libs
directory.
The common files between libxenstore and xenstored are kept in the
tools/xenstore directory to be easily accessible by xenstore-stubdom
which needs the xenstored files to be built.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
tools/libxc now contains libxenguest only. Move it to tools/libs/guest.
When generating the pkg-config file for libxenguest a filter is now
required for replacing "xenctrl" by "xencontrol" in the
"Requires.private:" entry. Add this filter to tools/libs/libs.mk.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> (stubdom parts)
Today tools/libxc needs to be built after tools/libs as libxenctrl is
depending on some libraries in tools/libs. This in turn blocks moving
other libraries depending on libxenctrl below tools/libs.
So carve out libxenctrl from tools/libxc and move it into
tools/libs/ctrl.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> (stubdom parts)
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> (python parts)
Acked-by: Wei Liu <wl@xen.org>
The headers.chk target in tools/Rules.mk tries to compile all headers
stand alone for testing them not to include any internal header.
Unfortunately the headers tested against are not complete, as any
header for a Xen library is not included in the include path of the
test compile run, resulting in a failure in case any of the tested
headers in including an official Xen library header.
Fix that by copying the official headers located in
tools/libs/*/include to tools/include.
In order to support libraries with header name other than xen<lib>.h
or with multiple headers add a LIBHEADER make variable a lib specific
Makefile can set in that case.
Move the headers.chk target from Rules.mk to libs.mk as it is used
for libraries in tools/libs only.
Add NO_HEADERS_CHK variable to skip checking headers as this will be
needed e.g. for libxenctrl.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
A previous commit split ebmalloc to its own translation unit but forgot
to modify gitignore.
Fixes: 8856a914bf ("build: also check for empty .bss.* in .o -> .init.o conversion")
Signed-off-by: Wei Liu <wl@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add the /buildinfo/config entry to the hypervisor filesystem. This
entry contains the .config file used to build the hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add a new script xen/tools/binfile for including a binary file at build
time being usable via a pointer and a size variable in the hypervisor.
Make use of that generic tool in xsm.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Add a simple proxy for tunneling socket connection over vchan. This is
based on existing vchan-node* applications, but extended with socket
support. vchan-socket-proxy serves both as a client and as a server,
depending on parameters. It can be used to transparently communicate
with an application in another domian that normally expose UNIX socket
interface. Specifically, it's written to communicate with qemu running
within stubdom.
Server mode listens for vchan connections and when one is opened,
connects to a pointed UNIX socket. Client mode listens on UNIX
socket and when someone connects, opens a vchan connection. Only
a single connection at a time is supported.
Additionally, socket can be provided as a number - in which case it's
interpreted as already open FD (in case of UNIX listening socket -
listen() needs to be already called). Or "-" meaning stdin/stdout - in
which case it is reduced to vchan-node2 functionality.
Example usage:
1. (in dom0) vchan-socket-proxy --mode=client <DOMID>
/local/domain/<DOMID>/data/vchan/1234 /run/qemu.(DOMID)
2. (in DOMID) vchan-socket-proxy --mode=server 0
/local/domain/<DOMID>/data/vchan/1234 /run/qemu.(DOMID)
This will listen on /run/qemu.(DOMID) in dom0 and whenever connection is
made, it will connect to DOMID, where server process will connect to
/run/qemu.(DOMID) there. When client disconnects, vchan connection is
terminated and server vchan-socket-proxy process also disconnects from
qemu.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Commit df669de074 un-tracked the generated
Go code, but it was decided that we actually keep the generated code
in-tree.
Undo the changes to ignore the generated code, and re-generate it.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
The generated go files were tracked temporarily while the initial
implementation of gengotypes.py was in progress. They can now be removed
and ignored by git and hg.
While here, make sure generated files are removed by make clean.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Acked-by: Wei Liu <wl@xen.org>
The if_changed macro from Linux, in addition to check if any files
needs an update, check if the command line has changed since the last
invocation. The latter will force a rebuild if any options to the
executable have changed.
if_changed_rule checks dependencies like if_changed, but execute
rule_$(1) instead of cmd_$(1) when a target needs to be rebuilt. A rule_
macro can call more than one cmd_ macro. One of the cmd_ macro in a
rule need to be call using a macro that record the command line, so
cmd_and_record is introduced. It is similar to cmd_and_fixup from
Linux but without a call to fixdep which we don't have yet. (We will
later replace cmd_and_record by cmd_and_fixup.)
Example of a rule_ macro:
define rule_cc_o_c
$(call cmd_and_record,cc_o_o)
$(call cmd,objcopy)
endef
This needs one of the call to use cmd_and_record, otherwise no .*.cmd
file will be created, and the target will keep been rebuilt.
In order for if_changed to works correctly, we need to load the .%.cmd
files that the macro generates, this is done by adding targets in to
the $(targets) variable. We use intermediate_targets to add %.init.o
dependency %.o to target since there aren't in obj-y.
We also add $(MAKECMDGOALS) to targets so that when running for
example `make common/memory.i`, make will load the associated .%.cmd
dependency file.
Beside the if_changed*, we import the machinery used for a "beautify
output". The important one is when running make with V=2 which help to
debug the makefiles by printing why a target is been rebuilt, via the
$(echo-why) macro.
if_changed and if_changed_rule aren't used yet.
Most of this code is copied from Linux v5.4, including the
documentation.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Having Linux kernel drivers for 2.6 based kernels in the Xen tree is
not really needed any longer. So remove them from the tree.
In case anyone wants to look at them they are still available in
older branches.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This is the initial implementation of the expectations enhancement
to improve inline asm livepatching.
Expectations are designed as optional feature, since the main use of
them is planned for inline asm livepatching. The flag enabled allows
to control the expectation state.
Each expectation has data and len fields that describe the data
that is expected to be found at a given patching (old_addr) location.
The len must not exceed the data array size. The data array size
follows the size of the opaque array, since the opaque array holds
the original data and therefore must match what is specified in the
expectation (if enabled).
The payload structure is modified as each expectation structure is
part of the livepatch_func structure and hence extends the payload.
Each expectation is checked prior to the apply action (i.e. as late
as possible to check against the most current state of the code).
For the replace action a new payload's expectations are checked AFTER
all applied payloads are successfully reverted, but BEFORE new payload
is applied. That breaks the replace action's atomicity and in case of
an expectation check failure would leave a system with all payloads
reverted. That is obviously insecure. Use it with caution and act
upon replace errors!
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Reviewed-by: Norbert Manthey <nmanthey@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
This is an implementation of 4 new livepatch module vetoing hooks,
that can be optionally supplied along with modules.
Hooks that currently exists in the livepatch mechanism aren't agile
enough and have various limitations:
* run only from within a quiescing zone
* cannot conditionally prevent applying or reverting
* do not have access to the module context
To address these limitations the following has been implemented:
1) pre-apply hook
runs before the apply action is scheduled for execution. Its main
purpose is to prevent from applying a livepatch when certain
expected conditions aren't met or when mutating actions implemented
in the hook fail or cannot be executed.
2) post-apply hook
runs after the apply action has been executed and quiescing zone
exited. Its main purpose is to provide an ability to follow-up on
actions performed by the pre- hook, when module application was
successful or undo certain preparation steps of the pre- hook in
case of a failure. The success/failure error code is provided to
the post- hooks via the rc field of the payload structure.
3) pre-revert hook
runs before the revert action is scheduled for execution. Its main
purpose is to prevent from reverting a livepatch when certain
expected conditions aren't met or when mutating actions implemented
in the hook fail or cannot be executed.
4) post-revert hook
runs after the revert action has been executed and quiescing zone
exited. Its main purpose is to perform cleanup of all previously
executed mutating actions in order to restore the original system
state from before the current module application.
The success/failure error code is provided to the post- hooks via
the rc field of the payload structure.
The replace action performs atomically the following actions:
- revert all applied modules
- apply a single replacement module.
With the vetoing hooks in place various inter-hook dependencies may
arise. Also, during the revert part of the operation certain vetoing
hooks may detect failing conditions that previously were satisfied.
That could in turn lead to situation when the revert part must be
rolled back with all the pre- and post- hooks re-applied, which again
can't be guaranteed to always succeed.
The simplest response to this complication is to disallow the replace
action completely on modules with vetoing hooks.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Petre Eftime <epetre@amazon.com>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Reviewed-by: Norbert Manthey <nmanthey@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
This change is part of a independant stacked livepatch modules
feature. This feature allows to bypass dependencies between modules
upon loading, but still verifies Xen build ID matching.
In order to prevent (up)loading any livepatches built for different
hypervisor version as indicated by the Xen Build ID, add checking for
the payload's vs Xen's build id match.
To achieve that embed into every livepatch another section with a
dedicated hypervisor build id in it. After the payload is loaded and
the .livepatch.xen_depends section becomes available, perform the
check and reject the payload if there is no match.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Bjoern Doebel <doebel@amazon.de>
Reviewed-by: Eslam Elnikety <elnikety@amazon.de>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
c/s f089fddd94 broke the Ocaml ABI by renumering
XEN_SYSCTL_PHYSCAP_directio without adjusting the Ocaml
physinfo_cap_flag enumeration.
Add build machinery which will check the ABI correspondence.
This will result in a compile time failure whenever constants get
renumbered/added without a compatible adjustment to the Ocaml ABI.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
After building the hypervisor binary. Note that the check is performed
by searching for the magic header value at the start of the binary.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Instead of ignoring xen.lds and asm-offsets.s for every specific arch,
let's instead just use gitignore's wildcard feature to ignore them for
all archs.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Blktap2 is effectively dead for a few years.
Notable changes in this patch:
0. Unhook blktap2 from build system
1. libxl no longer supports TAP disk backend, with appropriate assertions
added and some code paths now return ERROR_FAIL
2. Tap is no longer a supported backend
3. Remove blktap2 entry from MAINTAINERS
A patch to remove blktap2 directory will come later.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The directory is created by Visual Studio Code editor to store its
local state.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
The original intent of this patch was to rename xen-vbd-interface.markdown.7
to xen-vbd-interface.pandoc.7 to remove the final markdown file from the docs/
tree.
The DOC_MANx lists are broken. They contain MANxSRC-y twice, the first half
with a partial %.pod substituation, and the second half with a partial
%.markdown substitution. This is also the root cause behind the filtering
activity in the uninstall-man$(i)-pages rule.
Furthermore, the logic for generating the manpage targets is unnecesserily
repetative, owing to the layout of source files in the man/ directory.
Therefore, tackle the problem by renaming all of our manpage source files from
"$FORMAT.$SECTION" to "$SECTION.$FORMAT". For the two xl.cfg.5 and xl.1 which
are preprocessed by autoconf to contain path information, this requires
updating configure.ac and .gitignore. The markdown to pandoc conversion is
performed as well, as it is also a straight rename.
An ancillary benefit of this renaming is that text editors stand a chance of
being able to work out the correct mode to use.
As for the makefile:
1) Break the MAN_SECTIONS list out of the GENERATE_MANPAGE_RULES loop, as we
are going to use it a second time.
2) Do away with the individaul MANxSRC-y variables. Use a single list,
derived from all *.pod and *.pandoc files, with their format suffixes
removed.
3) Use a $(foreach ...) to generate the DOC_MANx lists, filling them with the
correct content.
4) The DOC_HTML and DOC_TXT can now include all manpages with a single
substitution, as they don't need to separate the manpages by
section-numbered-directory.
5) Fix up the filenames in the manpage metarule to match the renaming.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In order to be able to verify the 32-bit variant builds and runs,
introduce a respective target (and the necessary other adjustments).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
As was validly pointed out as motivation for similar Linux side changes
(https://lkml.org/lkml/2018/6/22/677), using long sequences of
directives and auxiliary instructions, like is commonly the case when
setting up an alternative patch site, gcc can be mislead into believing
an asm() to be more heavy weight than it really is. By presenting it
with an assembler macro invocation instead, this can be avoided.
Initially I wanted to outright change the C macros ALTERNATIVE() and
ALTERNATIVE_2() to invoke the respective assembler ones, but doing so
would require quite a bit of cleanup of some use sites, because of the
exra necessary quoting combined with the need that each assembler macro
argument must consist of just a single string literal. We can consider
working towards that subsequently.
For now, set the stage of using the assembler macros here by providing a
new generated header, being the slightly massaged pre-processor output
of (for now just) alternative-asm.h. The massaging is primarily to be
able to properly track the build dependency: For this, we need the C
compiler to see the inclusion, which means we shouldn't directly use an
asm(". include ...") directive.
The dependency added to asm-offsets.s is not a true one; it's just the
easiest approach I could think of to make sure the new header gets
generated early on, without having to fiddle with xen/Makefile (and
introducing some x86-specific construct there).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
So that it can be used by other components apart from the efi specific
code. By moving the detection code creating a dummy efi/disabled file
can be avoided.
This is required so that the conditional used to define the efi symbol
in the linker script can be removed and instead the definition of the
efi symbol can be guarded using the preprocessor.
The motivation behind this change is to be able to build Xen using lld
(the LLVM linker), that at least on version 6.0.0 doesn't work
properly with a DEFINED being used in a conditional expression:
ld -melf_x86_64_fbsd -T xen.lds -N prelink.o --build-id=sha1 \
/root/src/xen/xen/common/symbols-dummy.o -o /root/src/xen/xen/.xen-syms.0
ld: error: xen.lds:233: symbol not found: efi
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Daniel Kiper <daniel.kiper@oracle.com>
I have chosen to licence this utility as LGPL-v2.1-only, similar to
other LGPL elements of the Xen tools, because it may want to be moved
into or combined with osstest or some other project at some point in
the future, so it wants a licence compatible with osstest's AGPLv3+.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This archaeology script:
- figures out what the current and previous Xen versions were
- looks for appropriate git branches for them
- finds SUPPORT.md for each one
- feeds its findings to parse-support-md
We do not intend to integrate this into docs/Makefile, because it
relies on the git history. Instead, we will take the rune provided in
the head comment and paste a variant of it into an appropriate cronjob
on xenbits.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Lars Kurth <lars.kurth@citrix.com>
---
v3: Provide -D option.
This functionality is going to reside in vpci.c (and the corresponding
vpci.h header), and should be arch-agnostic. The handlers introduced
in this patch setup the basic functionality required in order to trap
accesses to the PCI config space, and allow decoding the address and
finding the corresponding handler that should handle the access
(although no handlers are implemented).
Note that the traps to the PCI IO ports registers (0xcf8/0xcfc) are
setup inside of a x86 HVM file, since that's not shared with other
arches.
A new XEN_X86_EMU_VPCI x86 domain flag is added in order to signal Xen
whether a domain should use the newly introduced vPCI handlers, this
is only enabled for PVH Dom0 at the moment.
A very simple user-space test is also provided, so that the basic
functionality of the vPCI traps can be asserted. This has been proven
quite helpful during development, since the logic to handle partial
accesses or accesses that expand across multiple registers is not
trivial.
The handlers for the registers are added to a linked list that's keep
sorted at all times. Both the read and write handlers support accesses
that expand across multiple emulated registers and contain gaps not
emulated.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
[IO parts]
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
[ARM]
Acked-by: Julien Grall <julien.grall@arm.com>
[Tools]
Acked-by: Wei Liu <wei.liu2@citrix.com>
Yes, recent AMD CPUs don't support them anymore, but I think we should
nevertheless cope.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add the shim build symbol file and remove the xen-shim binary (which
is no longer created).
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Jan Beulich