Use the apply-build-vars make macro to replace the @xxx@ markers in
most *.in files only at build time.
As some of the markers are local to tools/configure, introduce
config/Tools-paths.mk.in and add the related make variables to it.
Add Tools-paths to the PATH_FILES make variable in order to include
the definitions for replacing them in the *.in files.
Add the generated files to the distclean target.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
On a fedora system, if you run `sudo sh install.sh` you break your
system. The installation clobbers /var/run, a symlink to /run.
A subsequent boot fails when /var/run and /run are different since
accesses through /var/run can't find items that now only exist in /run
and vice-versa.
Skip populating /var/run/xen during make install.
The directory is already created by some scripts. Adjust all remaining
scripts to create XEN_RUN_DIR at runtime.
Use the shell variable XEN_RUN_DIR instead of hardcoded paths.
XEN_RUN_STORED is covered by XEN_RUN_DIR because xenstored is usually
started afterwards.
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
XEN_LIB_STORED is serving no real purpose, as it is a mount point for
a tmpfs, so it can be replaced easily by XEN_RUN_STORED.
XENSTORED_ROOTDIR is basically unused already, there is just a single
reference in xs_daemon_rootdir() with a fallback to XEN_LIB_STORED,
and a .gdbinit file setting it.
Remove the .gdbinit file, as it is not known having been used since
ages, and make xs_daemon_rootdir() an alias of xs_daemon_rundir().
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Remove "build" targets.
Use simply expanded variables when recursively expanded variable
aren't needed. (Use ":=" instead of "=".)
Don't check if a directory already exist when installing, just create
it.
Fix $(HOTPLUGPATH), it shouldn't have any double-quote.
Some reindentation.
FreeBSD, "hotplugpath.sh" is already installed by common/.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
The sysconfig variable XENSTORED_ROOTDIR is not used anymore.
It used to point to a directory with tdb files, which is now a tmpfs.
In case the database is not in tmpfs, like on sysv and BSD systems,
xenstored will truncate existing database files during start.
Fixes: 2ef6ace428 ("tools: don't remove tdb data base file before starting xenstored")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
--log does not take a file, it specifies what is supposed to be logged.
Also separate the XENSTORED and XENCONSOLED variables by a newline.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
At the moment the execution of xencommons is gated on the presence of the
privcmd device, but that's not correct, since privcmd is available to all Xen
domains (privileged or unprivileged). Instead of using privcmd use the
xenstored device, which will only be available to the domain that's in charge
of running xenstored, and thus xencommons.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
...because it's empty. While there also rename xendriverdomain_startcmd to
xendriverdomain_start in order to match the nomenclature of the file.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: fix up minor error ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
FreeBSD init scripts don't have /usr/local/{bin/sbin} in it's PATH, which
prevents `xl devd` from working properly since hotplug scripts require the set
of xenstore cli tools to be in PATH.
While there also fix the usage of --pidfile, which according to the xl help
doesn't use "=", and add braces around XLDEVD_PIDFILE.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This is the default hotplug script for block devices. Its only job is to
copy the "params" blkback xenstore node to "physical-device".
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The removal of the udev rules highlighted that although it has been
replaced by "xl devd" there isn't an initscript to replace it.
To enable this add a --pidfile option to xl devd.
Tested on Linux by running the script in dom0 and checking the daemon
was started/stopped, but not in an actual driver domain environment
since I don't have one conveniently available. I also checked that
running without the --pidfile option still works.
Scripts mainly cribbed from the xencommons for each platform.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On creation time, tap and xnb interfaces are created with an mtu of
1500 bytes, assuming the bridge will have the same value.
Instead, check the bridge mtu and configure the new xnb or
tap interface with the same value.
The tools used are sed and ifconfig, both included on base. No need
to install additional ports (no new dependences).
Signed-off-by: Gustau Perez <gustau.perez@gmail.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.cmapbell@citrix.com>
[ ijc -- clarified title ]
The original rule to target "distclean" in tools/Rules.mk was in effect
"make clean". It should be "make distclean".
However not all Makefiles in subdirectories have distclean target
defined. So this patch also adds a bunch of distclean targets to various
Makefiles. They only depend on clean target and don't have any actions
in most cases.
With the patch applied, following command outputs 0 results:
find tools -name 'Makefile*' -exec grep -L 'distclean' {} \+ \
| grep -v ocaml | grep -v libfsimage
Ocaml and libfsimage are known to have distclean defined in a dedicated
rules file.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The "install" rules depends on both "all" and "subdirs-install" and
"all" depends on "subdirs-all". This leads the "install" rules to call
both "subdirs-all" and "subdirs-install" which create a race with two
concurrent `make` within the same directory (systemd) trying to make the
same things (xen.conf) and failing.
Ultimatly, "install" should only depend on the things it needs to
install, and not on "all".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The current usage of LIBEXEC is bogus. It describes the directory for
private xen executables. Other places create their own, similar
libexecdir path as $prefix/lib/xen/*.
Additional two other variables are used to describe similar paths:
PRIVATE_BINDIR and PRIVATE_PREFIX
The autoconf documentation refers to libexec as a directory for
executables and stuff which is called by other programs, not by the
user.
Adjust all places that want libexecdir as a target path. LIBEXEC refers
now to the base directory. Three convenience variables are used to refer
to paths to private binaries, libs and include files.
In the systemd files LIBEXEC_BIN is substituted, so this variable has to
be present in autoconf. All other variables are expanded in Paths.mk
because they are only used in Makefiles.
Most users of LIBEXEC are updated to use LIBEXEC_BIN because that is
what they want.
Users of PRIVATE_BINDIR are updated to use LIBEXEC_BIN because that is
what they want. PRIVATE_BINDIR and PRIVATE_PREFIX usage is removed by
this patch, in favour of LIBXEC_BIN and LIBEXEC
An internal libxl function was removed. A single helper to retrieve
LIBEXEC_BIN remains.
As suggested by the autoconf documentation, configure appends the
package name to LIBEXEC to make sure the provided directory really
refers to xen. This makes sure "make uninstall" preserves the real
libexecdir.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested, updated QEMU_TRADITIONAL_REVISION to
pickup version which uses LIBEXEC_BIN ]
This small helper is responsible for generating Dom0 JSON config
stub and writing Dom0 xenstore entries. This helpers subsumes two calls
to xenstore-write in xencommons script.
Dom0 UUID is intentionally left untouched, so it is always all
zeros. This makes sure that we don't leak Dom0 stubs across rebooting.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- folded in incremental patch for *BSD ]
Juergen Gross