Introduce spec_ctrl_new_guest_context() to encapsulate all logic pertaining to
using MSR_PRED_CMD for a new guest context, even if it only has one user
presently.
Introduce X86_BUG_IBPB_NO_RET, and use it extend spec_ctrl_new_guest_context()
with a manual fixup for hardware which mis-implements IBPB.
This is part of XSA-422 / CVE-2022-23824.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 2b27967fb8)
The IBPB_RET bit indicates that the CPU's implementation of MSR_PRED_CMD.IBPB
does flush the RSB/RAS too.
This is part of XSA-422 / CVE-2022-23824.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 24496558e6)
The addition of a call to shadow_blow_tables() from shadow_teardown()
has resulted in the "no vcpus" related assertion becoming triggerable:
If domain_create() fails with at least one page successfully allocated
in the course of shadow_enable(), or if domain_create() succeeds and
the domain is then killed without ever invoking XEN_DOMCTL_max_vcpus.
Note that in-tree tests (test-resource and test-tsx) do exactly the
latter of these two.
The assertion's comment was bogus anyway: Shadow mode has been getting
enabled before allocation of vCPU-s for quite some time. Convert the
assertion to a conditional: As long as there are no vCPU-s, there's
nothing to blow away.
Fixes: e7aa55c0aa ("x86/p2m: free the paging memory pool preemptively")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
A similar assertion/comment pair exists in _shadow_prealloc(); the
comment is similarly bogus, and the assertion could in principle trigger
e.g. when shadow_alloc_p2m_page() is called early enough. Replace those
at the same time by a similar early return, here indicating failure to
the caller (which will generally lead to the domain being crashed in
shadow_prealloc()).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: a92dc2bb30
master date: 2022-10-24 15:46:11 +0200
When finalizing a transaction, any error occurring after checking for
conflicts will result in the transaction being performed only
partially today. Additionally accounting data will not be updated at
the end of the transaction, which might result in further problems
later.
Avoid those problems by multiple modifications:
- free any transaction specific nodes which don't need to be committed
as they haven't been written during the transaction as soon as their
generation count has been verified, this will reduce the risk of
out-of-memory situations
- store the transaction specific node name in struct accessed_node in
order to avoid the need to allocate additional memory for it when
finalizing the transaction
- don't stop the transaction finalization when hitting an error
condition, but try to continue to handle all modified nodes
- in case of a detected error do the accounting update as needed and
call the data base checking only after that
- if writing a node in a transaction is failing (e.g. due to a failed
quota check), fail the transaction, as prior changes to struct
accessed_node can't easily be undone in that case
This is part of XSA-421 / CVE-2022-42326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Tested-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 2dd823ca72)
In case a node has been created in a transaction and it is later
deleted in the same transaction, the transaction will be terminated
with an error.
As this error is encountered only when handling the deleted node at
transaction finalization, the transaction will have been performed
partially and without updating the accounting information. This will
enable a malicious guest to create arbitrary number of nodes.
This is part of XSA-421 / CVE-2022-42325.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 13ac37f141)
Integers in Ocaml have 63 or 31 bits of signed precision.
On 64-bit builds of Ocaml, this is fine because a C uint32_t always fits
within a 63-bit signed integer.
In 32-bit builds of Ocaml, this goes wrong. The C uint32_t is truncated
first (loses the top bit), then has a unsigned/signed mismatch.
A "negative" value (i.e. a packet on the ring of between 1G and 2G in size)
will trigger an exception later in Bytes.make in xb.ml, and because the packet
is not removed from the ring, the exception re-triggers on every subsequent
query, creating a livelock.
Fix both the source of the exception in Xb, and as defence in depth, mark the
domain as bad for any Invalid_argument exceptions to avoid the risk of
livelock.
This is XSA-420 / CVE-2022-42324.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit ae34df4d82)
XSA-322 fixed a domid reuse vulnerability by assigning Dom0 as the owner of
any nodes left after a domain is shutdown (e.g. outside its /local/domain/N
tree).
However Dom0 has no quota on purpose, so this opened up another potential
attack vector. Avoid it by deleting these nodes instead of assigning them to
Dom0.
This is part of XSA-419 / CVE-2022-42323.
Fixes: c46eff9212 ("tools/ocaml/xenstored: clean up permissions for dead domains")
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit db471408ed)
The permission scheme of Xenstore nodes is not really covered by
docs/misc/xenstore.txt, other than referring to the Xen wiki.
Add a paragraph explaining the permissions of nodes, and especially
mentioning removal of nodes when a domain has been removed from
Xenstore.
This is part of XSA-419.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit d084d2c6df)
Having a file backed data base has the only advantage of being capable
to dump the contents of it while Xenstore is running, and potentially
using less swap space in case the data base can't be kept in memory.
It has the major disadvantage of a huge performance overhead: switching
to keep the data base in memory only speeds up live update of xenstored
with 120000 nodes from 20 minutes to 11 seconds. A complete tree walk
of this configuration will be reduced from 7 seconds to 280 msecs
(measured by "xenstore-control check").
So make the internal memory data base the default and enhance the
"--internal-db" command line parameter to take an optional parameter
allowing to switch the internal data base back to the file based one.
This is part of XSA-419.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit d174fefa90)
In case a domain is removed from Xenstore, remove all nodes owned by
it per default.
This tackles the problem that nodes might be created by a domain
outside its home path in Xenstore, leading to Xenstore hogging more
and more memory. Domain quota don't work in this case if the guest is
rebooting in between.
Since XSA-322 ownership of such stale nodes is transferred to dom0,
which is helping against unintended access, but not against OOM of
Xenstore.
As a fallback for weird cases add a Xenstore start parameter for
keeping today's way to handle stale nodes, adding the risk of Xenstore
hitting an OOM situation.
This is part of XSA-419 / CVE-2022-42322.
Fixes: 496306324d ("tools/xenstore: revoke access rights for removed domains")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 755d3f9deb)
Instead of doing an open tree walk using call recursion, use
walk_node_tree() when deleting a sub-tree of nodes.
This will reduce code size and avoid many nesting levels of function
calls which could potentially exhaust the stack.
This is part of XSA-418 / CVE-2022-42321.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit ea16962053)
Instead of doing an open tree walk using call recursion, use
walk_node_tree() when checking the store for inconsistencies.
This will reduce code size and avoid many nesting levels of function
calls which could potentially exhaust the stack.
This is part of XSA-418 / CVE-2022-42321.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit a07cc0ec60)
check_store() is using a hash table for storing all node names it has
found via walking the tree. Additionally it using another hash table
for all children of a node to detect duplicate child names.
Simplify that by dropping the second hash table as the first one is
already holding all the needed information.
This is part of XSA-418 / CVE-2022-42321.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 70f719f52a)
Add a generic function to walk the complete node tree. It will start
at "/" and descend recursively into each child, calling a function
specified by the caller. Depending on the return value of the user
specified function the walk will be aborted, continued, or the current
child will be skipped by not descending into its children.
This is part of XSA-418 / CVE-2022-42321.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 0d7c5d19bc)
In case of write_node() returning an error, remove_child_entry() will
call corrupt() today. This could result in an endless recursion, as
remove_child_entry() is called by corrupt(), too:
corrupt()
check_store()
check_store_()
remove_child_entry()
Fix that by letting remove_child_entry() return an error instead and
let the caller decide what to do.
This is part of XSA-418 / CVE-2022-42321.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 0c00c51f3b)
In order to reduce stack usage due to recursion, switch
construct_node() to use a loop instead.
This is part of XSA-418 / CVE-2022-42321.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit da8ee25d02)
Today chk_domain_generation() is being used to check whether a node
permission entry is still valid or whether it is referring to a domain
no longer existing. This is done by comparing the node's and the
domain's generation count.
In case no struct domain is existing for a checked domain, but the
domain itself is valid, chk_domain_generation() assumes it is being
called due to the first node created for a new domain and it will
return success.
This might be wrong in case the checked permission is related to an
old domain, which has just been replaced with a new domain using the
same domid.
Fix that by letting chk_domain_generation() fail in case a struct
domain isn't found. In order to cover the case of the first node for
a new domain try to allocate the needed struct domain explicitly when
processing the related SET_PERMS command. In case a referenced domain
isn't existing, flag the related permission to be ignored right away.
This is XSA-417 / CVE-2022-42320.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit ab12821822)
Using the struct buffered data pointer of the current processed request
for temporary data allocations has a major drawback: the used area (and
with that the temporary data) is freed only after the response of the
request has been written to the ring page or has been read via the
socket. This can happen much later in case a guest isn't reading its
responses fast enough.
As the temporary data can be safely freed after creating the response,
add a temporary context for that purpose and use that for allocating
the temporary memory, as it was already the case before commit
cc06124648 ("xenstore: add small default data buffer to internal
struct").
Some sub-functions need to gain the "const" attribute for the talloc
context.
This is XSA-416 / CVE-2022-42319.
Fixes: cc06124648 ("xenstore: add small default data buffer to internal struct")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 2a587de219)
Add a support statement for the scope of support regarding different
Xenstore variants. Especially oxenstored does not (yet) have security
support of untrusted driver domains, as those might drive oxenstored
out of memory by creating lots of watch events for the guests they are
servicing.
Add a statement regarding Live Update support of oxenstored.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit c7bc20d8d1)
Introduce a limit on the number of outstanding reply packets in the xenbus
queue. This limits the number of in-flight requests: when the output queue is
full we'll stop processing inputs until the output queue has room again.
To avoid a busy loop on the Unix socket we only add it to the watched input
file descriptor set if we'd be able to call `input` on it. Even though Dom0
is trusted and exempt from quotas a flood of events might cause a backlog
where events are produced faster than daemons in Dom0 can consume them, which
could lead to an unbounded queue size and OOM.
Therefore the xenbus queue limit must apply to all connections, Dom0 is not
exempt from it, although if everything works correctly it will eventually
catch up.
This prevents a malicious guest from sending more commands while it has
outstanding watch events or command replies in its input ring. However if it
can cause the generation of watch events by other means (e.g. by Dom0, or
another cooperative guest) and stop reading its own ring then watch events
would've queued up without limit.
The xenstore protocol doesn't have a back-pressure mechanism, and doesn't
allow dropping watch events. In fact, dropping watch events is known to break
some pieces of normal functionality. This leaves little choice to safely
implement the xenstore protocol without exposing the xenstore daemon to
out-of-memory attacks.
Implement the fix as pipes with bounded buffers:
* Use a bounded buffer for watch events
* The watch structure will have a bounded receiving pipe of watch events
* The source will have an "overflow" pipe of pending watch events it couldn't
deliver
Items are queued up on one end and are sent as far along the pipe as possible:
source domain -> watch -> xenbus of target -> xenstore ring/socket of target
If the pipe is "full" at any point then back-pressure is applied and we prevent
more items from being queued up. For the source domain this means that we'll
stop accepting new commands as long as its pipe buffer is not empty.
Before we try to enqueue an item we first check whether it is possible to send
it further down the pipe, by attempting to recursively flush the pipes. This
ensures that we retain the order of events as much as possible.
We might break causality of watch events if the target domain's queue is full
and we need to start using the watch's queue. This is a breaking change in
the xenstore protocol, but only for domains which are not processing their
incoming ring as expected.
When a watch is deleted its entire pending queue is dropped (no code is needed
for that, because it is part of the 'watch' type).
There is a cache of watches that have pending events that we attempt to flush
at every cycle if possible.
Introduce 3 limits here:
* quota-maxwatchevents on watch event destination: when this is hit the
source will not be allowed to queue up more watch events.
* quota-maxoustanding which is the number of responses not read from the ring:
once exceeded, no more inputs are processed until all outstanding replies
are consumed by the client.
* overflow queue on the watch event source: all watches that cannot be stored
on destination are queued up here, a single command can trigger multiple
watches (e.g. due to recursion).
The overflow queue currently doesn't have an upper bound, it is difficult to
accurately calculate one as it depends on whether you are Dom0 and how many
watches each path has registered and how many watch events you can trigger
with a single command (e.g. a commit). However these events were already
using memory, this just moves them elsewhere, and as long as we correctly
block a domain it shouldn't result in unbounded memory usage.
Note that Dom0 is not excluded from these checks, it is important that Dom0 is
especially not excluded when it is the source, since there are many ways in
which a guest could trigger Dom0 to send it watch events.
This should protect against malicious frontends as long as the backend follows
the PV xenstore protocol and only exposes paths needed by the frontend, and
changes those paths at most once as a reaction to guest events, or protocol
state.
The queue limits are per watch, and per domain-pair, so even if one
communication channel would be "blocked", others would keep working, and the
domain itself won't get blocked as long as it doesn't overflow the queue of
watch events.
Similarly a malicious backend could cause the frontend to get blocked, but
this watch queue protects the frontend as well as long as it follows the PV
protocol. (Although note that protection against malicious backends is only a
best effort at the moment)
This is part of XSA-326 / CVE-2022-42318.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit 9284ae0c40)
Ensures we cannot store more than [capacity] elements in a [Queue]. Replacing
all Queue with this module will then ensure at compile time that all Queues
are correctly bound checked.
Each element in the queue has a class with its own limits. This, in a
subsequent change, will ensure that command responses can proceed during a
flood of watch events.
No functional change.
This is part of XSA-326.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit 19171fb5d8)
The queue here would only ever hold at most one element. This will simplify
follow-up patches.
This is part of XSA-326.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit c0a86a4627)
Hiding the type will make it easier to change the implementation
in the future without breaking code that relies on it.
No functional change.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit 7ade30a145)
By default the OCaml garbage collector would return memory to the OS only
after unused memory is 5x live memory. Tweak this to 120% instead, which
would match the major GC speed.
This is part of XSA-326.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit 4a8bacff20)
Previously we'd perform the operation, record the updated tree in the
transaction record, then try to insert a watchop path and the reply packet.
If we exceeded max requests we would've returned EQUOTA, but still:
* have performed the operation on the transaction's tree
* have recorded the watchop, making this queue effectively unbounded
It is better if we check whether we'd have room to store the operation before
performing the transaction, and raise EQUOTA there. Then the transaction
record won't grow.
This is part of XSA-326 / CVE-2022-42317.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit 329f4d1a65)
We currently have 2 different set of defaults in upstream Xen git tree:
* defined in the source code, only used if there is no config file
* defined in the oxenstored.conf.in upstream Xen
An oxenstored.conf file is not mandatory, and if missing, maxrequests in
particular has an unsafe default.
Resync the defaults from oxenstored.conf.in into the source code.
This is part of XSA-326 / CVE-2022-42316.
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit 84734955d4)
Add a xenstore-control command "quota" to:
- show current quota settings
- change quota settings
- show current quota related values of a domain
Note that in the case the new quota is lower than existing one,
Xenstored may continue to handle requests from a domain exceeding the
new limit (depends on which one has been broken) and the amount of
resource used will not change. However the domain will not be able to
create more resource (associated to the quota) until it is back to below
the limit.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 9c484bef83)
Some quota variables are not exported via header files.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 1da16d5990)
Add the memory accounting for Xenstore nodes. In order to make this
not too complicated allow for some sloppiness when writing nodes. Any
hard quota violation will result in no further requests to be accepted.
This is part of XSA-326 / CVE-2022-42315.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 00e9e32d02)
Add the memory accounting for registered watches.
When a socket connection is destroyed, the associated watches are
removed, too. In order to keep memory accounting correct the watches
must be removed explicitly via a call of conn_delete_all_watches() from
destroy_conn().
This is part of XSA-326 / CVE-2022-42315.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 7f9978a2cc)
Add the memory accounting for queued responses.
In case adding a watch event for a guest is causing the hard memory
quota of that guest to be violated, the event is dropped. This will
ensure that it is impossible to drive another guest past its memory
quota by generating insane amounts of events for that guest. This is
especially important for protecting driver domains from that attack
vector.
This is part of XSA-326 / CVE-2022-42315.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit f6d0013364)
The amount of memory a domain can consume in Xenstore is limited by
various quota today, but even with sane quota a domain can still
consume rather large memory quantities.
Add the infrastructure for keeping track of the amount of memory a
domain is consuming in Xenstore. Note that this is only the memory a
domain has direct control over, so any internal administration data
needed by Xenstore only is not being accounted for.
There are two quotas defined: a soft quota which will result in a
warning issued via syslog() when it is exceeded, and a hard quota
resulting in a stop of accepting further requests or watch events as
long as the hard quota would be violated by accepting those.
Setting any of those quotas to 0 will disable it.
As default values use 2MB per domain for the soft limit (this basically
covers the allowed case to create 1000 nodes needing 2kB each), and
2.5MB for the hard limit.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 0d4a8ec7a9)
Setting up the basic structure when introducing dom0 has the advantage
to be able to add proper node memory accounting for the added nodes
later.
This makes it possible to do proper node accounting, too.
An additional requirement to make that work fine is to correct the
owner of the created nodes to be dom0_domid instead of domid 0.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 60e2f6020d)
Today a guest is free to access as many nodes in a single transaction
as it wants. This can lead to unbounded memory consumption in Xenstore
as there is the need to keep track of all nodes having been accessed
during a transaction.
In oxenstored the number of requests in a transaction is being limited
via a quota maxrequests (default is 1024). As multiple accesses of a
node are not problematic in C Xenstore, limit the number of accessed
nodes.
In order to let read_node() detect a quota error in case too many nodes
are being accessed, check the return value of access_node() and return
NULL in case an error has been seen. Introduce __must_check and add it
to the access_node() prototype.
This is part of XSA-326 / CVE-2022-42314.
Suggested-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 268369d8e3)
The accounting of nodes can be simplified now that each connection
holds the associated domid.
Fix the node accounting to cover nodes created for a domain before it
has been introduced. This requires to react properly to an allocation
failure inside domain_entry_inc() by returning an error code.
Especially in error paths the node accounting has to be fixed in some
cases.
This is part of XSA-326 / CVE-2022-42313.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit dbef1f7482)
Don't use conn->id for privilege checks, but domain_is_unprivileged().
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 3047df38e1)
A guest not reading its Xenstore response buffer fast enough might
pile up lots of Xenstore watch events buffered. Reduce the generated
load by dropping new events which already have an identical copy
pending.
The special events "@..." are excluded from that handling as there are
known use cases where the handler is relying on each event to be sent
individually.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit b5c0bdb96d)
Add another quota for limiting the number of outstanding requests of a
guest. As the way to specify quotas on the command line is becoming
rather nasty, switch to a new scheme using [--quota|-Q] <what>=<val>
allowing to add more quotas in future easily.
Set the default value to 20 (basically a random value not seeming to
be too high or too low).
A request is said to be outstanding if any message generated by this
request (the direct response plus potential watch events) is not yet
completely stored into a ring buffer. The initial watch event sent as
a result of registering a watch is an exception.
Note that across a live update the relation to buffered watch events
for other domains is lost.
Use talloc_zero() for allocating the domain structure in order to have
all per-domain quota zeroed initially.
This is part of XSA-326 / CVE-2022-42312.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 36de433a27)
A future modification will limit the number of outstanding requests
for a domain, where "outstanding" means that the response of the
request or any resulting watch event hasn't been consumed yet.
In order to avoid a malicious guest being capable to block other guests
by not reading watch events, add a timeout for watch events. In case a
watch event hasn't been consumed after this timeout, it is being
deleted. Set the default timeout to 20 seconds (a random value being
not too high).
In order to support to specify other timeout values in future, use a
generic command line option for that purpose:
--timeout|-w watch-event=<seconds>
This is part of XSA-326 / CVE-2022-42311.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 5285dcb1a5)
When removing a watched node outside of a transaction, two watch events
are being produced instead of just a single one.
When finalizing a transaction watch events can be generated for each
node which is being modified, even if outside a transaction such
modifications might not have resulted in a watch event.
This happens e.g.:
- for nodes which are only modified due to added/removed child entries
- for nodes being removed or created implicitly (e.g. creation of a/b/c
is implicitly creating a/b, resulting in watch events for a, a/b and
a/b/c instead of a/b/c only)
Avoid these additional watch events, in order to reduce the needed
memory inside Xenstore for queueing them.
This is being achieved by adding event flags to struct accessed_node
specifying whether an event should be triggered, and whether it should
be an exact match of the modified path. Both flags can be set from
fire_watches() instead of implying them only.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 3a96013a3e)
Add two helpers for freeing struct buffered_data: free_buffered_data()
for freeing one instance and conn_free_buffered_data() for freeing all
instances for a connection.
This is avoiding duplicated code and will help later when more actions
are needed when freeing a struct buffered_data.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit ead062a68a)
Today send_reply() is used for both, normal request replies and watch
events.
Split it up into send_reply() and send_event(). This will be used to
add some event specific handling.
add_event() can be merged into send_event(), removing the need for an
intermediate memory allocation.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 9bfde319db)
Commit f2bebf72c4 "xenstore: rework of transaction handling" moved
out from copying the entire database everytime a new transaction is
opened to track the list of nodes changed.
The content of all the nodes accessed during a transaction will be
temporarily stored in TDB using a different key.
The function create_node() may write/update multiple nodes if the child
doesn't exist. In case of a failure, the function will revert any
changes (this include any update to TDB). Unfortunately, the function
which reverts the changes (i.e. destroy_node()) will not use the correct
key to delete any update or even request the transaction to fail.
This means that if a client decide to go ahead with committing the
transaction, orphan nodes will be created because they were not linked
to an existing node (create_node() will write the nodes backwards).
Once some nodes have been partially updated in a transaction, it is not
easily possible to undo any changes. So rather than continuing and hit
weird issue while committing, it is much saner to fail the transaction.
This will have an impact on any client that decides to commit even if it
can't write a node. Although, it is not clear why a normal client would
want to do that...
Lastly, update destroy_node() to use the correct key for deleting the
node. Rather than recreating it (this will allocate memory and
therefore fail), stash the key in the structure node.
This is XSA-415 / CVE-2022-42310.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
(cherry picked from commit 5d71766bd1)
XSA-115 extended destroy_node() to update the node accounting for the
connection. The implementation is assuming the connection is the parent
of the node, however all the nodes are allocated using a separate context
(see process_message()). This will result to crash (or corrupt) xenstored
as the pointer is wrongly used.
In case of an error, any changes to the database or update to the
accounting will now be reverted in create_node() by calling directly
destroy_node(). This has the nice advantage to remove the loop to unset
the destructors in case of success.
Take the opportunity to free the nodes right now as they are not
going to be reachable (the function returns NULL) and are just wasting
resources.
This is XSA-414 / CVE-2022-42309.
Fixes: 0bfb2101f2 ("tools/xenstore: fix node accounting after failed node creation")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
(cherry picked from commit 1cd3cc7ea2)
Hardware using GICv2 needs to create a P2M mapping of 8KB GICv2 area
when the domain is created. Considering the worst case of page tables
which requires 6 P2M pages as the two pages will be consecutive but not
necessarily in the same L3 page table and keep a buffer, populate 16
pages as the default value to the P2M pages pool in p2m_init() at the
domain creation stage to satisfy the GICv2 requirement. For GICv3, the
above-mentioned P2M mapping is not necessary, but since the allocated
16 pages here would not be lost, hence populate these pages
unconditionally.
With the default 16 P2M pages populated, there would be a case that
failures would happen in the domain creation with P2M pages already in
use. To properly free the P2M for this case, firstly support the
optionally preemption of p2m_teardown(), then call p2m_teardown() and
p2m_set_allocation(d, 0, NULL) non-preemptively in p2m_final_teardown().
As non-preemptive p2m_teardown() should only return 0, use a
BUG_ON to confirm that.
Since p2m_final_teardown() is called either after
domain_relinquish_resources() where relinquish_p2m_mapping() has been
called, or from failure path of domain_create()/arch_domain_create()
where mappings that require p2m_put_l3_page() should never be created,
relinquish_p2m_mapping() is not added in p2m_final_teardown(), add
in-code comments to refer this.
Fixes: cbea5a1149 ("xen/arm: Allocate and free P2M pages from the P2M pool")
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
(cherry picked from commit: c7cff11888)
p2m_init() is mostly trivial initialisation, but has two fallible operations
which are on either side of the backpointer trigger for teardown to take
actions.
p2m_free_vmid() is idempotent with a failed p2m_alloc_vmid(), so rearrange
p2m_init() to perform all trivial setup, then set the backpointer, then
perform all fallible setup.
This will simplify a future bugfix which needs to add a third fallible
operation.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
(cherry picked from commit: 3783e58331)
The backport didn't adapt to the earlier function prototype taking more
(unused here) arguments.
Fixes: c521504457 ("xen/arm, libxl: Implement XEN_DOMCTL_shadow_op for Arm")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Henry Wang <Henry.Wang@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
While the comment next to the lock dropping in preparation of
recursively calling acquire_grant_for_copy() mistakenly talks about the
rd == td case (excluded a few lines further up), the same concerns apply
to the calling of release_grant_for_copy() on a subsequent error path.
This is CVE-2022-33748 / XSA-411.
Fixes: ad48fb963d ("gnttab: fix transitive grant handling")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: 6e3aab858e
master date: 2022-10-11 14:29:30 +0200
This commit sets/tearsdown of p2m pages pool for non-privileged Arm
guests by calling `p2m_set_allocation` and `p2m_teardown_allocation`.
- For dom0, P2M pages should come from heap directly instead of p2m
pool, so that the kernel may take advantage of the extended regions.
- For xl guests, the setting of the p2m pool is called in
`XEN_DOMCTL_shadow_op` and the p2m pool is destroyed in
`domain_relinquish_resources`. Note that domctl->u.shadow_op.mb is
updated with the new size when setting the p2m pool.
- For dom0less domUs, the setting of the p2m pool is called before
allocating memory during domain creation. Users can specify the p2m
pool size by `xen,domain-p2m-mem-mb` dts property.
To actually allocate/free pages from the p2m pool, this commit adds
two helper functions namely `p2m_alloc_page` and `p2m_free_page` to
`struct p2m_domain`. By replacing the `alloc_domheap_page` and
`free_domheap_page` with these two helper functions, p2m pages can
be added/removed from the list of p2m pool rather than from the heap.
Since page from `p2m_alloc_page` is cleaned, take the opportunity
to remove the redundant `clean_page` in `p2m_create_table`.
This is part of CVE-2022-33747 / XSA-409.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
master commit: cbea5a1149
master date: 2022-10-11 14:28:44 +0200
Jan Beulich