cvs -z3 -d:pserver:anonymous@cvs.savannah.nongnu.org:/sources/vgabios
co vgabios
Patchs backported:
- vgabios: Support VESA power management extensions. (cs 17692)
- x86, hvm: Allow Cirrus VGA BIOS to clear framebuffer with minimal
PIO writes. (cs 16242)
This patch fixes the bug with the IDR boot CD.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Through recent additions to the rombios the code section of the post
function has filled up considerably. When I enable the BX_TCGBIOS
compile time option the BIOS crashes since the post section code
(starts at $e05b) spills over into the nmi entry point (starts at
$e2c3). as86 doesn't cause an error when building.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
On AMD cpus, HVM S3 resume was hanging in the bios when trying
to load the x_firmware_waking_vector from absolute
address 0xEA01C (that is, a segment offset greater than 64kB).
This change also now uses 20-bits (instead of 16) from the FACS
standard firmware_waking_vector.
Signed-off-by: Juergen Keil <jk@tools.de>
F10 to select boot device. This will be rarely used, and it is
possible to hit F10 before the message is displayed and the keypress
will still register. So in practice it is quite possibel to use this
boot feature reliably without needing a multi-second delay.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
* Cleanly define a scratch area for temporary storage
* Raise Etherboot ROM out of the way of larger VGA BIOSes
Also detect virtual VGA adaptors more cleanly.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
- add S3 package in ACPI DSDT table. Guest OS will get S3 value from
this package and write the value to PM1A control register to
trigger S3 suspend.
- Add S3 resume logic in rombios post code. the CMOS shutdown register
is used to indicate if this is a S3 resume.
- if it is s3 resume, rombios will get wakeup vector from ACPI FACS
table and jump to wakeup vector. Per ACPI spec, the wakeup vector
jumping must be the forms CS:IP, in which CS=3D(wakeup vector>>4)
IP=3D(wakeup vector)&0xF, for example, for vector=3D0x12345,
CS:IP=3D0x1234:0x5
Note: clobber_entry_point will clobber the post entry, which make S3
resume not work. We will directly jmp to POST Entry if it in S3
Resume path.
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Ke Liping <liping.ke@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
- Move MTRR MSR initialisation into hvmloader.
- Simplify initialisation logic by overlaying UC on default WB rather
than vice versa.
- Clean up hypervisor HVM MTRR/PAE code's interface with rest of
hypervisor.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
In particular:
- BIOS release date
- BIOS characteristics
- BIOS extended characteristics (Targeted Content Distribution is
required to be specified to pass WHQL).
- CPU speed
Based on a patch by Kamala Narasimhan <kamala.narasimhan@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Some versions of Windows 2000 only support no more than 15 cpus in
ACPI table, otherwise it will cause a BSOD
KMODE_EXCEPTION_NOT_HANDLED. This patch decrease the cpu count in the
ACPI DSDT to 15.
Signed-off-by: Xu Dongxiao <dongxiao.xu@intel.com>
At the same time, fix the ACPI processor IDs in the Processor objects.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
I ran into this when I was reviewing what was outstanding to get
NetWare to run fully virtualized.
The BIOS emulator code has the segment and offset backward in the
returned buffer for the int 13h, fn 48h BIOS call.
Signed-off-by: Bruce Rogers <brogers@novell.com>
No need to generate the correct number dynamically since
present/not-present can be determined from the MADT. What *is*
required is that we have a Processor Object for every present
processor. We statically declare 16 Objects, which should be plenty
for now.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
** Currently only 2 virtual hotplug pci slots(6~7) are created so more
than 2 vtd dev can't be hotplugged, but we can easily extend it in
future.
Three new commands are added:
"xm pci-list domid" show the current assigned vtd device, like:
VSlt domain bus slot func
0x6 0x0 0x02 0x00 0x0
"xm pci-detach" hot remove the specified vtd device by the virtual
slot, like:
xm pci-detach EdwinHVMDomainVtd 6
"xm pci-attach DomainID dom bus dev func [vslot]" hot add a new vtd
device in the vslot. If no vslot specified, a free slot will be picked
up. e.g. to insert '0000:03:00.0':
xm pci-attach EdwinHVMDomainVtd 0 3 0 0
** guest pci hotplug
linux: pls. use 2.6.X and enable ACPI PCI hotplug ( Bus options=> PCI
hotplug => ACPI PCI hotplug driver )
windows: 2000/xp/2003/vista are all okay
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
A new platform variable 'hpet' is added, which defaults to 0 for new
guests (that is, hpet disabled). Default is off (no hpet) because
hpet is currently less accurate in keeping time than PIT (because no
timer_mode adjustments).
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
tools/firmware/etherboot by default (the dependency of eb_roms.h on
Config does not seem to always prevent the build from going ahead, for
some reason).
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
We now include the source for Etherboot (5.4.2, obtained from git)
rather than a pre-built ROM. This gives better traceability and GPL
licence compliance. See tools/firmware/etherboot/README for details.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
HVM-guest boot time. Also make a few PCI0 resource ResourceProducer
type -- this seems to be specified by some randomly-sampled real ACPI
systems.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This patch adds extboot to Xen. It should be pretty harmless as the
moment because it's never enabled. extboot allows arbitrary block
devices to be used to boot guests including SCSI and PV disks. I've
tested it with both Windows and Linux guests in QEMU.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The attached patch implements a mini BIOS menu for choosing a
non-default
boot device. When a guest starts it'll display
'Press F10 to select boot device'
And wait 3 seconds, before continuing with the normal boot device. If
they press the F10 key, a menu is shown allowing a choice between
floppy, harddisk, cdrom and network (PXE).
I can't take credit for this originally - Jeremy Katz wrote it for
KVM, I merely re-diffed the patch to work against Xen's QEMU/BIOS code
tree. It has been tested in Fedora successfully against 3.1.x and 3.2.x
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
CC: Jeremy Katz <katzj@redhat.com>
If more than one boot device has been selected, the currently selected
number displayed in the menu is wrong.
Signed-off-by: Stefano Stabellini <stefano.stabellini@citrix.com>
hvmloader is modified to dynamically detect this, allowing possibility
of optional full vmxassist replacement in 3.2 stable branch in future.
Currently 'vmxassist=y' is not much use since no replacement is
implemented.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Keir Fraser
Ian Jackson
Keir Fraser