These two changesets:
24184:4ecd3615e726 tools: use system installed libaio by default.
24186:7aa5838499d1 tools: use system libaio for blktap1 as well.
cause HVM guest installs (both Windows and Redhat) to fail on Debian
squeeze with xl. So change the default for now.
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
xc_domain_save/restore currently pay no attention to
HVM_PARAM_VIRIDIAN which results in an HVM domain running a recent
version on Windows (post-Vista) locking up on a domain restore due to
EOIs (done via a viridian MSR write) being silently dropped. This
patch adds an extra save entry for the viridian parameter and also
adds code in the viridian kernel module to catch attempted use of
viridian functionality when the HVM parameter has not been set.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Without this change it is not possible to page-out all guest pages, then
trigger a page-in for all pages, and then page-out everything once
again. All pages in the mru list can not be paged out because they
remain active in the internal bitmap of paged pages.
Use the mru list only if the number of paged-out pages is larger than
the mru list. If the number is smaller, start to clear the mru list. In
case the number of paged-out pages drops to zero the mru list and the
internal bitmap will be empty as well.
Also add a new interface for dropped pages. If a gfn was dropped there
is no need to adjust the mru list because dropping a page is not usage
of a page.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Introduce a cmdline handling for the pager. This simplifies libxl support,
debug and mru_size are not passed via the environment anymore.
The new interface looks like this:
xenpaging [options] -f <pagefile> -d <domain_id>
options:
-d <domid> --domain=<domid> numerical domain_id of guest. This option is required.
-f <file> --pagefile=<file> pagefile to use. This option is required.
-m <max_memkb> --max_memkb=<max_memkb> maximum amount of memory to handle.
-r <num> --mru_size=<num> number of paged-in pages to keep in memory.
-d --debug enable debug output.
-h --help this output.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Subsequent patches will use xenstored to store the numbers of pages
xenpaging is suppose to page-out.
Remove num_pages and use target_pages instead.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This change reverses the task of xenpaging. Before this change a fixed number
of pages was paged out. With this change the guest will not have access to
more than the given number of pages at the same time.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
In preparation of upcoming libxl integration,
move xenpaging binary from /usr/sbin/ to /usr/lib/xen/bin/
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Nomination of gfns can fail, but may succeed later.
Thats the case for a guest that starts ballooned.
v2:
- print debug when clearing uncosumed happens
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Remove the if/else logic to exit from the in case a signal arrives.
Update comments.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Move page resume loop into its own function.
Move page eviction loop into its own function.
Allocate all possible slots in a paging file to allow growing and
shrinking of the number of paged-out pages. Adjust other places to
iterate over all slots.
This change is required by subsequent patches.
v2:
- check if victims allocation succeeded
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Remove xc_dominfo_t from paging_t, record only max_pages.
This value is used to setup internal data structures.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Move comment about xc_handle to the right place.
Allocate paging early and use calloc.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Catch lseek() errors.
Use -1 as return value and let caller read errno.
Remove const casts from buffer pointers, the page is writeable.
Use wrapper for write() which matches the read() prototype.
Remove unused stdarg.h inclusion.
Remove unused macro.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
v3:
- adjust arguments for xc_mem_paging_enable() failures
v2:
- move changes to file_op() to different patch
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Remove stale comment.
If a page was populated several times the vcpu is paused and
xenpaging has to unpause it again.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
In libvchan_client_init, go to the error path if the gntdev device is
not available. Otherwise, a segfault happens later as the vchan
context is invalid.
Signed-off-by: Anil Madhavapeddy <anil@recoil.org>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
We were immediately putting the p2m entry translation for grant
copy operations. This allowed for an unnecessary race by which the
page could have been swapped out between the p2m lookup and the actual
use. Hold on to the p2m entries until the grant operation finishes.
Also fixes a small bug: for the source page of the copy, get_page
was assuming the page was owned by the source domain. It may be a
shared page, since we don't perform an unsharing p2m lookup.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Instead of risking deadlock by holding onto the gfn's acquired during
a guest page table walk, acquire an extra reference within the get_gfn/
put_gfn critical section, and drop the extra reference when done with
the map. This ensures liveness of the map, i.e. the underlying page
won't be paged out.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
XENPF_get_cpuinfo should init the flags output field rather than only
modify it.
XENPF_cpu_online must check for the input CPU number to be in range.
XENPF_cpu_offline must also do that, and should also reject attempts to
offline CPU 0 (this fails in cpu_down() too, but preventing this here
appears more correct given that the code here calls
continue_hypercall_on_cpu(0, ...), which would be flawed if cpu_down()
would ever allow bringing down CPU 0 (and a distinct error code is
easier to deal with when debugging issues).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Allow pages typed log dirty to be paged out, and the proper type to
restored when paging pages back in.
Signed-off-by: Andres lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
queue on exit, even after a wakeup.
Otherwise, when we go round the loop in wait_event(), we may not
actually sleep after the first iteration, as we do not put ourselves
back on the queue on wakeup.
Signed-off-by: Keir Fraser <keir@xen.org>
The Intel GPU uses a two pages NVS region called OpRegion.
In order to get full support for the driver in the guest
we need to map this region.
This patch reserves 2 pages on the top of the memory in the
reserved area and mark this region as NVS in the e820. Then
we write the address to the config space (offset 0xfc) so the
device model can map the OpRegion at this address in the guest.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
When updating a p2m mapping to shared, previous code
unconditionally set the m2p entry for the old mfn to invalid.
We now check that the old mfn does not remain shared.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Disabling log dirty mode in HAP always returns -EINVAL. Make it
return the correct rc on success.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
The path p2m-lookup -> p2m-pt->get_entry -> 1GB PoD superpage ->
pod_demand_populate ends in the pod code performing a p2m_set_entry with
no locks held (in order to split the 1GB superpage into 512 2MB ones)
Further, it calls p2m_unlock after that, which will break the spinlock.
This patch attempts to fix that.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
This undoes a single change from c/s 24136:3622d7fae14d
(common/grant_table.c) and several from c/s 24100:be8daf78856a
(common/memory.c). It also completes the former with two previously
missing ia64 specific code adjustments. Authors Cc-ed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
To acknowledge the tools' setting of control/shutdown it is normal for
PV drivers to rm the key. This leads to libxl__xs_read() returning
NULL and thus a subsequent strcmp on the return value will cause a
segfault.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
24184:4ecd3615e726 missed this because I was accidentally testing with a
.config containing CONFIG_SYSTEM_LIBAIO=n. Tools tree now fully rebuilt
without this. There were no other issues.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Ian Jackson
Keir Fraser
Paul Durrant
Olaf Hering
Anil Madhavapeddy
Ian Campbell
Andres Lagar-Cavilla
Jan Beulich
Jean Guyader