This is a middle-work patch, preparing for the future new vMCE model.
It removes mcg_ctl, disables MCG_CTL_P, and sets bank count to 2.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Committed-by: Jan Beulich <jbeulich@suse.com>
These are provided using the "script=" syntax described in
docs/misc/xl-disk-configuration.txt.
The existing hotplug scripts currently conflate two different
concepts, namely that of making a datapath available in the backend
domain (logging into iSCSI LUNs and the like) and that of actually
connecting that datapath to a Xen backend path (e.g. writing
"physical-device" node in xenstore to bring up blkback).
For this reason the script support implemented here is only supported
in conjunction with backendtype=phy.
Eventually we hope to rework the hotplug scripts to separate the to
concepts, but that is not 4.2 material.
In addition there are some other subtleties:
- Previously in the blktap case we would add "script = .../blktap" to
the backend flex array, but then jumped to the PHY case which added
"script = .../block" too. The block one takes precendence since it
comes second.
This was, accidentally, correct. The blktap script is for blktap1
devices and not blktap2 devices. libxl completely manages the
blktap2 side of things without resorting to hotplug scripts and
creates a blkback device directly. Therefore the "block" script is
always the correct one to call. Custom script are not supported in
this context.
- libxl should not write the "physical-device" node. This is the
responsibility of the block script. Writing the "physical-device"
node in libxl basically completely short-cuts the standard block
hotplug script which uses "physical-device" to know if it has run
already or not.
In the case of more complex scripts libxl cannot know the right
value to write here anyway, in particular the device may not exist
until after the script is called.
This change has the side effect of re-enabling the checks for
device sharing aspect of the default block script, which I have tested
and which now cause libxl to properly abort now that libxl properly
checks for hotplug script errors.
There is no sharing check for blktap2 since even if you reuse the
same vhd the resulting tap device is different. I would have preferred
to simply write the "physical-device" node for the blktap2 case but
the hotplug script infrastructure is not currently setup to handle
LIBXL__DEVICE_KIND_VBD
devices without a hotplug script (backendtype phy and tap both end
up as KIND_VBD). Changing this was more surgery than I was happy doing
for 4.2 and therefore I have simply hardcoded to the block script for
the LIBXL_DISK_BACKEND_TAP case.
- libxl__device_disk_set_backend running against a phy device with a
script cannot stat the device to check its properties since it may
not exist until the script is run. Therefore I have special cased
this in disk_try_backend to simply assume that backend == phy is
always ok if a script was
configured. Similarly the other backend types are always rejected
if a script was configured.
Note that the reason for implementing the default script behaviour
in device_disk_add instead of libxl__device_disk_setdefault is
because we need to be able to tell when the script was
user-supplied rather than defaulted by libxl in order to correctly
implement the above. The setdefault function must be idempotent so
we cannot simply update disk->script.
I suspect that for 4.3 a script member should be added to
libxl__device, this would also help in the case above of handling
devices with no script in a consistent manner. This is not 4.2
material.
- When the block script falls through and shells out to a block-$type
script it used to pass "$node" however the only place this was
assigned was in the remove+phy case (in which case it contains the
file:// derived /dev/loopN device), and in that case the script
exits without falling through to the block-$type case.
Since libxl never creates a type other than phy this never happens
in practice anyway and we now call the correct block-$type script
directly. But fix it up anyway since it is confusing.
- The block-nbd and block-enbd scripts which we supply appear to be
broken WRT the hotplug calling convention, in that they seem to
expect a command line parameter (perhaps the $node described above)
rather than reading the appropriate node from xenstore.
I rather suspect this was broken by 7774:e2e7f47e6f79 in November
2005. I think it is safe to say no one is using these scripts! I
haven't fixed this here. It would be good to track down some working
scripts and either incorproate them or defer to them in their existing
home (e.g. if they live somewhere useful like the nbd tools
package).
- Added a few block script related entries to check-xl-disk-parse
from http://backdrift.org/xen-block-iscsi-script-with-multipath-support
and http://lists.linbit.com/pipermail/drbd-user/2008-September/010221.html /
http://www.drbd.org/users-guide-emb/s-xen-configure-domu.html (and
snuck in another interesting empty CDROM case)
This highlighted two bugs in the libxlu disk parser handling of the
deprecated "<script>:" prefix:
- It was failing to prefix with "block-" to construct the actual
script name
- The regex for matching iscsi or drdb or e?nbd was incorrect
- Use libxl__abs_path for the nic script too. Just because the
existing code nearly tricked me into repeating the mistake
I have tested with a custom block script which uses "lvchange -a" to
dynamically add remove the referenced device (simulates iSCSI
login/logout without requiring me to faff around setting up an iSCSI
target). I also tested on a blktap2 system.
I haven't directly tested anything more complex like iscsi: or nbd:
other than what check-xl-disk-parse exercises.
[ Recommit of correct version of 25727:a8d708fcb347, which was mangled
during commit. Sorry. -iwj ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This fixes theoretical issues with those constraints - operands that
get clobbered before consuming all input operands must be marked so
according the the gcc documentation. Beyond that, the change is merely
code improvement, not a bug fix.
In __prepare_to_wait(), properly mark early clobbered registers. By
doing so, we at once eliminate the need to save/restore rCX and rDI.
In check_wakeup_from_wait(), make the current constraints match by
removing the code that actuall alters registers. By adjusting the
resume address in __prepare_to_wait(), we can simply re-use the copying
operation there (rather than doing a second pointless copy in the
opposite direction after branching to the resume point), which at once
eliminates the need for re-loading rCX and rDI inside the asm().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
We pass be_path to tapdisk_destroy but we've already deleted it so it
fails to read tapdisk-params. However it appears that we need to
destroy the tap device after tearing down xenstore, to avoid the leak
reported by Greg Wettstein in
<201207312141.q6VLfJje012656@wind.enjellic.com>.
So read the tapdisk-params in the cleanup transaction, before the
remove, and pass that down to destroy_tapdisk instead. tapdisk-params
may of course be NULL if the device isn't a tap device.
There is no need to tear down the tap device from
libxl__initiate_device_remove since this ultimately calls
libxl__device_destroy.
Propagate and log errors from libxl__device_destroy_tapdisk.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
These are provided using the "script=" syntax described in
docs/misc/xl-disk-configuration.txt.
The existing hotplug scripts currently conflate two different
concepts, namely that of making a datapath available in the backend
domain (logging into iSCSI LUNs and the like) and that of actually
connecting that datapath to a Xen backend path (e.g. writing
"physical-device" node in xenstore to bring up blkback).
For this reason the script support implemented here is only supported
in conjunction with backendtype=phy.
Eventually we hope to rework the hotplug scripts to separate the to
concepts, but that is not 4.2 material.
In addition there are some other subtleties:
- Previously in the blktap case we would add "script = .../blktap" to
the backend flex array, but then jumped to the PHY case which added
"script = .../block" too. The block one takes precendence since it
comes second.
This was, accidentally, correct. The blktap script is for blktap1
devices and not blktap2 devices. libxl completely manages the
blktap2 side of things without resorting to hotplug scripts and
creates a blkback device directly. Therefore the "block" script is
always the correct one to call. Custom script are not supported in
this context.
- libxl should not write the "physical-device" node. This is the
responsibility of the block script. Writing the "physical-device"
node in libxl basically completely short-cuts the standard block
hotplug script which uses "physical-device" to know if it has run
already or not.
In the case of more complex scripts libxl cannot know the right
value to write here anyway, in particular the device may not exist
until after the script is called.
This change has the side effect of re-enabling the checks for
device sharing aspect of the default block script, which I have tested
and which now cause libxl to properly abort now that libxl properly
checks for hotplug script errors.
There is no sharing check for blktap2 since even if you reuse the
same vhd the resulting tap device is different. I would have preferred
to simply write the "physical-device" node for the blktap2 case but
the hotplug script infrastructure is not currently setup to handle
LIBXL__DEVICE_KIND_VBD
devices without a hotplug script (backendtype phy and tap both end
up as KIND_VBD). Changing this was more surgery than I was happy doing
for 4.2 and therefore I have simply hardcoded to the block script for
the LIBXL_DISK_BACKEND_TAP case.
- libxl__device_disk_set_backend running against a phy device with a
script cannot stat the device to check its properties since it may
not exist until the script is run. Therefore I have special cased
this in disk_try_backend to simply assume that backend == phy is
always ok if a script was
configured. Similarly the other backend types are always rejected
if a script was configured.
Note that the reason for implementing the default script behaviour
in device_disk_add instead of libxl__device_disk_setdefault is
because we need to be able to tell when the script was
user-supplied rather than defaulted by libxl in order to correctly
implement the above. The setdefault function must be idempotent so
we cannot simply update disk->script.
I suspect that for 4.3 a script member should be added to
libxl__device, this would also help in the case above of handling
devices with no script in a consistent manner. This is not 4.2
material.
- When the block script falls through and shells out to a block-$type
script it used to pass "$node" however the only place this was
assigned was in the remove+phy case (in which case it contains the
file:// derived /dev/loopN device), and in that case the script
exits without falling through to the block-$type case.
Since libxl never creates a type other than phy this never happens
in practice anyway and we now call the correct block-$type script
directly. But fix it up anyway since it is confusing.
- The block-nbd and block-enbd scripts which we supply appear to be
broken WRT the hotplug calling convention, in that they seem to
expect a command line parameter (perhaps the $node described above)
rather than reading the appropriate node from xenstore.
I rather suspect this was broken by 7774:e2e7f47e6f79 in November
2005. I think it is safe to say no one is using these scripts! I
haven't fixed this here. It would be good to track down some working
scripts and either incorproate them or defer to them in their existing
home (e.g. if they live somewhere useful like the nbd tools
package).
- Added a few block script related entries to check-xl-disk-parse
from http://backdrift.org/xen-block-iscsi-script-with-multipath-support
and http://lists.linbit.com/pipermail/drbd-user/2008-September/010221.html /
http://www.drbd.org/users-guide-emb/s-xen-configure-domu.html (and
snuck in another interesting empty CDROM case)
This highlighted two bugs in the libxlu disk parser handling of the
deprecated "<script>:" prefix:
- It was failing to prefix with "block-" to construct the actual
script name
- The regex for matching iscsi or drdb or e?nbd was incorrect
- Use libxl__abs_path for the nic script too. Just because the
existing code nearly tricked me into repeating the mistake
I have tested with a custom block script which uses "lvchange -a" to
dynamically add remove the referenced device (simulates iSCSI
login/logout without requiring me to faff around setting up an iSCSI
target). I also tested on a blktap2 system.
I haven't directly tested anything more complex like iscsi: or nbd:
other than what check-xl-disk-parse exercises.
[ reran flex/bison -iwj ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
* libxl may indeed register more than one callback for the same fd,
with some restrictions. The allowable range of responses to this by
the application means that this should pose no problems for users.
But the documentation comment should be fixed.
* Document the relaxed synchronicity semantics of the fd_modify
registration callback.
* A couple of comments referred to old names for functions.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
cc1: warnings being treated as errors
hvm.c: In function ‘hvm_hap_nested_page_fault’:
hvm.c:1282: error: passing argument 2 of ‘nestedhvm_hap_nested_page_fault’ from incompatible pointer type /local/scratch/ianc/devel/xen-unstable.hg/xen/include/asm/hvm/nestedhvm.h:55: note: expected ‘paddr_t *’ but argument is of type ‘long unsigned int *’
hvm_hap_nested_page_fault takes an unsigned long gpa and passes &gpa
to nestedhvm_hap_nested_page_fault which takes a paddr_t *. Since both
of the callers of hvm_hap_nested_page_fault (svm_do_nested_pgfault and
ept_handle_violation) actually have the gpa which they pass to
hvm_hap_nested_page_fault as a paddr_t I think it makes sense to
change the argument to hvm_hap_nested_page_fault.
The other user of gpa in hvm_hap_nested_page_fault is a call to
p2m_mem_access_check, which currently also takes a paddr_t gpa but I
think a paddr_t is appropriate there too.
Jan points out that this is also an issue for >4GB guests on the 32
bit hypervisor.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Previously we only initialised it if an explicit keyvar_init_val was
given but not if the default was implicitly 0.
In the generated code this only changes the unused libxl_event_init_type
function:
void libxl_event_init_type(libxl_event *p, libxl_event_type type)
{
+ assert(!p->type);
+ p->type = type;
switch (p->type) {
case LIBXL_EVENT_TYPE_DOMAIN_SHUTDOWN:
break;
However I think it is wrong that this function is unused, this and
libxl_event_init should be used by libxl__event_new. As it happens
both are just memset to zero but for correctness we should use the
init functions (in case the IDL changes).
In the generator we also need to properly handle init_var == 0 which
the current if statements incorrectly treat as False. This doesn't
actually have any impact on the generated code.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Change the TODOs in the remus code to "REMUS TODO" which will make
them easier to grep for later. AIUI all of these are essential for
use of remus in production.
Also add a new TODO and a new assert, to check rc on entry to
remus_checkpoint_dm_saved.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Do not lose the rc value passed to bootloader_callback. Do not lose
the rc value from the bl when the local disk detach succeeds.
While we're here rationalise the use of bl->rc to make things clearer.
Set it to zero at the start and always update it conditionally; copy
it into bootloader_callback's argument each time.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
To be consistent with the new function naming, rename
libxl__ao_devices to libxl__multidev and all variables aodevs to
multidev.
No functional change.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
These lines were exactly 80 columns wide, which produces hideous wrap
damage in an 80 column emacs. Reformat using emacs's C-c \,
which puts the \ in column 72 (by default) where possible.
Whitespace change only.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Don't have a fixed number of devices in the aodevs array, and instead
size it depending on the devices present in xenstore. Somewhat
formalise the multiple device addition/removal machinery to make this
clearer and easier to do.
As a side-effect we fix a few "lost thread of control" bug which would
occur if there were no devices of a particular kind. (Various if
statements which checked for there being no devices have become
redundant, but are retained to avoid making the patch bigger.)
Specifically:
* Users of libxl__ao_devices are no longer expected to know in
advance how many device operations they are going to do. Instead
they can initiate them one at a time, between bracketing calls to
"begin" and "prepared".
* The array of aodevs used for this is dynamically sized; to support
this it's an array of pointers rather than of structs.
* Users of libxl__ao_devices are presented with a more opaque interface.
They are are no longer expected to, themselves,
- look into the array of aodevs (this is now private)
- know that the individual addition/removal completions are
handled by libxl__ao_devices_callback (this callback function
is now a private function for the multidev machinery)
- ever deal with populating the contents of an aodevs
* The doc comments relating to some of the members of
libxl__ao_device are clarified. (And the member `aodevs' is moved
to put it with the other members with the same status.)
* The multidev machinery allocates an aodev to represent the
operation of preparing all of the other operations. See
the comment in libxl__multidev_begin.
A wrinkle is that the functions are called "multidev" but the structs
are called "libxl__ao_devices" and "aodevs". I have given these
functions this name to distinguish them from "libxl__ao_device" and
"aodev" and so forth by more than just the use of the plural "s"
suffix.
In the next patch we will rename the structs.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Receive POLLHUP on the bootloader master pty is not an error.
Hopefully it means that the bootloader has exited and therefore the
pty slave side has no process group any more. (At least NetBSD
indicates POLLHUP on the master in this case.)
So send the bootloader SIGTERM; if it has already exited then this has
no effect (except that on some versions of NetBSD it erroneously
returns ESRCH and we print a harmless warning) and we will then
collect the bootloader's exit status and be satisfied.
However, we remember that we have done this so that if we got POLLHUP
for some other reason than that the bootloader exited we report
something resembling a useful message.
In order to implement this we need to provide a way for users of
datacopier to handle POLLHUP rather than treating it as fatal.
We rename bootloader_abort to bootloader_stop since it now no longer
only applies to error situations.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
device_hotplug_done contains an open-coded but improved version of
libxl__device_destroy. So move the contents of device_hotplug_done
into libxl__device_destroy, deleting the old code, and replace it at
its old location with a function call.
Add the missing call to libxl__xs_transaction_abort (which was present
in neither version and technically speaking is always a no-op with
this code as it stands at the moment because no-one does "goto out"
other than after libxl__xs_transaction_start or _commit).
Also fix the error handling: the rc from the destroy should be
propagated into the aodev.
Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Generating the tpm_version.h is not make -j safe:
In file included from ../tpm/tpm_emulator.h:25:0,
from ../tpm/tpm_startup.c:18:
../tpm/tpm_version.h:1:0: error: unterminated #ifndef
make[5]: *** [tpm_startup.o] Error 1
This happens because make can not know that 'all-recursive' depends on
'version'. Fix this by calling the individual make targets. Doing it
this way avoids adding yet another patch to the downloaded source.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Using spin_lock_irq here is unnecessary (interrupts are not yet enabled) and
wrong (since they will get unexpectedly renabled by spin_unlock_irq).
We can just use spin_lock/spin_unlock.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This does not make the implementation fully asynchronous but just
updates the API to support asynchrony in the future.
Currently although these functions do not call hotplug scripts etc and
therefore are not "slow" (per the comment about ao machinery in
libxl_internal.h) they do interact with the device model and so are
not quite "fast" either. We can live with this for now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
If there is no cpufreq driver (e.g., with an AMD Opteron 8212) then
reading the P state statistics causes a deadlock as an uninitialized
spinlock is locked in do_get_pm_info(). The spinlock is initialized in
cpufreq_statistic_init() which is not called if cpufreq_driver == NULL.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Committed-by: Jan Beulich <jbeulich@suse.com>
Don't clobber it with the pfec from teh p2m walk behind it; the guest
will not expect (or be able to handle) error codes that come from the
p2m table, which it can't see or control.
Signed-off-by: Tim Deegan <tim@xen.org>
Acked-by: Christoph Egger <Christoph.Egger@amd.com>
Committed-by: Tim Deegan <tim@xen.org>
Fix write access fault when host npt is mapped read-only.
In this case let the host handle the #NPF.
Apply host p2mt to hap-on-hap pagetable entry.
This fixes the l2 guest graphic display refresh problem.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
This allows us to get rid of the 'grep version', which doesn't
work with localized compilers.
Signed-off-by: Tim Deegan <tim@xen.org>
Acked-by: Keir Fraser <keir@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
This complements c/s 9146:941897e98591, and also replaces a literal
zero with a proper manifest constant.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
The changeset 25694:e20085770cb5 causes a syntax error if readline
returns nothing due to non-existant path:
[ 148s] set -e; if [ `readlink -f /home/abuild/rpmbuild/BUILD/xen-4.2.25700/non-dbg/dist/install//usr/bin` != \
[ 148s] `readlink -f /usr/lib64/xen/bin` ]; then \
[ 148s] ln -sf /usr/lib64/xen/bin/pygrub /home/abuild/rpmbuild/BUILD/xen-4.2.25700/non-dbg/dist/install//usr/bin; \
[ 148s] fi
[ 148s] /bin/sh: line 0: [: /home/abuild/rpmbuild/BUILD/xen-4.2.25700/non-dbg/dist/install/usr/bin: unary operator expected
Add quoting to fix the error.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
libxl_internal.h says:
* Functions using LIBXL__INIT_EGC may *not* generally be called from
* within libxl, because libxl__egc_cleanup may call back into the
* application. ...
and
* ... [Functions which take an ao_how] MAY NOT
* be called from inside libxl, because they can cause reentrancy
* callbacks.
However, this was not enforced. Particularly the latter restriction
is easy to overlook, especially since during the transition period to
the new event system we have bent this rule a couple of times, and the
bad pattern simply involves passing 0 or NULL for the ao_how.
So use the compiler to enforce this property, as follows:
- Mark all functions which take a libxl_asyncop_how, or which
use EGC_INIT or LIBXL__INIT_EGC, with a new annotation
LIBXL_EXTERNAL_CALLERS_ONLY in the public header.
- Change the documentation comment for asynch operations and egcs to
say that this should always be done.
- Arrange that if libxl.h is included via libxl_internal.h,
LIBXL_EXTERNAL_CALLERS_ONLY expands to __attribute__((warning(...))),
which generates a message like this:
libxl.c:1772: warning: call to 'libxl_device_disk_remove'
declared with attribute warning:
may not be called from within libxl
Otherwise, the annotation expands to nothing, so external
callers are unaffected.
- Forbid inclusion of both libxl.h and libxl_internal.h unless
libxl_internal.h came first, so that the above check doesn't have
any loopholes. Files which include libxl_internal.h should not
include libxl.h as well.
This is enforced explicitly using #error. However, in practice
with the current tree it just changes the error message when this
mistake is made; otherwise we would carry on to immediately
following #define which would cause the compiler to complain that
LIBXL_EXTERNAL_CALLERS_ONLY was redefined. Then the developer
might be tempted to add a #ifndef which would be wrong - it would
leave the affected translation unit unprotected by the new
enforcement regime. So let's be explicit.
- Fix the one source of files which violate the above principle, the
output from the idl compiler, by removing the redundant inclusion
of libxl.h from the output.
Also introduce a new script "check-libxl-api-rules" which contains
some ad-hoc regexps to spot and complain when libxl.h contains
functions which mention libxl_asyncop_how but not
LIBXL_EXTERNAL_CALLERS_ONLY. This isn't a full C parser but is likely
to get the common cases right and err on the side of complaining.
While we are here, the invocation of perl for the bsd queue.h seddery
to $(PERL).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
For build systems which build certain Xen components separately, allow certain
components to be conditionally built based on .config, rather than always
building them.
This patch allows qemu and blktap to be configured in this manner.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Newer ocaml toolchains generate .spot and .spit files which are ocaml metadata
about their respective source files.
Add them to the clean rules as well as the .{hg,git}ignore files.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
gcc 4.5 as shipped with openSuSE 11.4 does not recognize the case of
LIBXL_DOMAIN_TYPE_INVALID properly:
cc1: warnings being treated as errors
libxl.c: In function 'libxl_primary_console_exec':
libxl.c:1408:14: error: 'domid' may be used uninitialized in this function
libxl.c:1409:9: error: 'cons_num' may be used uninitialized in this function
libxl.c:1410:24: error: 'type' may be used uninitialized in this function
libxl.c: In function 'libxl_primary_console_get_tty':
libxl.c:1421:14: error: 'domid' may be used uninitialized in this function
libxl.c:1422:9: error: 'cons_num' may be used uninitialized in this function
libxl.c:1423:24: error: 'type' may be used uninitialized in this function
make[3]: *** [libxl.o] Error 1
Fix this by adding a default case.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
xenbackendd is not needed by the xl toolstack, so move it's launch to
the xend script.
We have to iterate until we are sure there are no xend processes left,
since doing a single pkill usually leaves xend processes running.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: Christoph Egger <Christoph.Egger@amd.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This was set to zero immediately before the #GP injection code, since
SYSENTER doesn't really have a return address.
Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Furthermore, UREGS_cs and UREGS_rip don't need to be written a second
time, as the PUSHes above already can/do take care of putting in place
the intended values.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
This produces a more meaningful compiler diagnostic in case it happens
to trigger.
As a minor piece of cleanup, at once also use BUILD_BUG_ON_ZERO() to
actually define BUILD_BUG_ON() in the legacy case, slightly reducing
redundancy.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
We're allocating minimally a full page, so no reason to not also use
all that space.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Liu, Jinsong
Ian Campbell
Ian Jackson
Jan Beulich
Fabio Fantoni
Santosh Jodh
Olaf Hering
David Vrabel
Tim Deegan
Christoph Egger
Andrew Cooper
Roger Pau Monne
Dario Faggioli
Keir Fraser