While they're KERN_INFO messages and hence not visible by default, we
still have had reports that the amount of output is too large, not the
least because
- the command line controlled resizing of the console ring buffer
happens only after SRAT parsing (which may alone produce more than 16k
of output),
- the default resizing of the console ring buffer happens only after
ACPI table parsing, since the default size gets calculated depending
on the number or processors found.
Gate all per-processor logging behind a new "acpi=verbose", making sure
we wouldn't unintentionally pass this on to Dom0.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When the seq number is equal, sort by the title to get predictable
output ordering. This is useful for reproducible builds.
Signed-off-by: Maximilian Engelhardt <maxi@daemonizer.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
On the Cortex A53, when executing in AArch64 state, a load or store instruction
which uses the result of an ADRP instruction as a base register, or which uses
a base register written by an instruction immediately after an ADRP to the
same register, might access an incorrect address.
The workaround is to enable the linker flag --fix-cortex-a53-843419
if present, to check and fix the affected sequence. Otherwise print a warning
that Xen may be susceptible to this errata
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch reverts eight patches from staging.
The offending patch is the one that introduced libxl_pci_bdf (last one
in the list). The rest depend on that patch so they are also reverted.
8bf0fab142 "libxl / libxlu: support 'xl pci-attach/detach' by name"
e1141654c3 "docs/man: modify xl-pci-configuration(5) to add 'name' field to PCI_SPEC_STRING"
93c16ae47b "xl: support naming of assignable devices"
5ab684cb3e "libxl: introduce libxl_pci_bdf_assignable_add/remove/list/list_free(), ..."
66c2fbc6e8 "libxl: convert internal functions in libxl_pci.c..."
f73c5dd56d "docs/man: modify xl(1) in preparation for naming of assignable devices"
96ed6ff297 "libxlu: introduce xlu_pci_parse_spec_string()"
929f231140 "libxl: introduce 'libxl_pci_bdf' in the idl..."
Signed-off-by: Wei Liu <wl@xen.org>
Since assignable devices can be named, a subsequent patch will support use
of a PCI_SPEC_STRING containing a 'name' parameter instead of a 'bdf'. In
this case the name will be used to look up the 'bdf' in the list of assignable
(or assigned) devices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
A subsequent patch will introduce code to allow a name to be specified to
'xl pci-assignable-add' such that the assignable device may be referred to
by than name in subsequent operations.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Currently the documentation completely fails to mention the existence of
PCI_SPEC_STRING. This patch tidies things up, specifically clarifying that
'pci-assignable-add/remove' take <BDF> arguments where as 'pci-attach/detach'
take <PCI_SPEC_STRING> arguments (which will be enforced in a subsequent
patch).
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and prepare for adding support for non-positional parsing of 'bdf' and
'vslot' in a subsequent patch.
Also document 'BDF' as a first-class parameter type and fix the documentation
to state that the default value of 'rdm_policy' is actually 'strict', not
'relaxed', as can be seen in libxl__device_pci_setdefault().
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and put it into a new xl-pci-configuration(5) manpage, akin to the
xl-network-configration(5) and xl-disk-configuration(5) manpages.
This patch moves the content of the section verbatim. A subsequent patch
will improve the documentation, once it is in its new location.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
The special watches "@introduceDomain" and "@releaseDomain" should be
allowed for privileged callers only, as they allow to gain information
about presence of other guests on the host. So send watch events for
those watches via privileged connections only.
In order to allow for disaggregated setups where e.g. driver domains
need to make use of those special watches add support for calling
"set permissions" for those special nodes, too.
This is part of XSA-115.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Fix the command line document to account for the default scheduler in
Kconfig being credit2 now, and the fact that it's selectable at build
time and thus different builds could end up with different default
schedulers.
Fixes: dafd936ddd ('Make credit2 the default scheduler')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
... and increase default "irq-max-guests" to 32.
It's not necessary to have an array of a size more than 1 for non-shareable
IRQs and it might impact scalability in case of high "irq-max-guests"
values being used - every IRQ in the system including MSIs would be
supplied with an array of that size.
Since it's now less impactful to use higher "irq-max-guests" value - bump
the default to 32. That should give more headroom for future systems.
Requested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
... and increase the default to 16.
Current limit of 7 is too restrictive for modern systems where one GSI
could be shared by potentially many PCI INTx sources where each of them
corresponds to a device passed through to its own guest. Some systems do not
apply due dilligence in swizzling INTx links in case e.g. INTA is declared as
interrupt pin for the majority of PCI devices behind a single router,
resulting in overuse of a GSI.
Introduce a new command line option to configure that limit and dynamically
allocate an array of the necessary size. Set the default size now to 16 which
is higher than 7 but could later be increased even more if necessary.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Adding the new value into the enumeration makes it immediately available
to xl, so this patch adjusts the xl.cfg(5) documentation accordingly.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Only spelling errors; no functional changes.
In docs/misc/dump-core-format.txt there are a few more instances of
'informations'. I'll leave that up to someone who can properly determine
how those sentences should be constructed.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
On the Cortex A55, TLB entries can be allocated by a speculative AT
instruction. If this is happening during a guest context switch with an
inconsistent page table state in the guest, TLBs with wrong values might
be allocated.
The ARM64_WORKAROUND_AT_SPECULATE workaround is used as for erratum
1165522 on Cortex A76 or Neoverse N1.
This change is also introducing the MIDR identifier for the Cortex-A55.
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Julien Grall <jgrall@amazon.com>
On the affected Cortex-A76/Neoverse-N1 cores (r0p0 to r3p0),
if a virtual address for a cacheable mapping of a location is being
accessed by a core while another core is remapping the virtual
address to a new physical page using the recommended break-before-make
sequence, then under very rare circumstances TLBI+DSB completes before
a read using the translation being invalidated has been observed by
other observers. The workaround repeats the TLBI+DSB operation for all
the TLB flush operations. While this is stricly not necessary, we don't
want to take any risk.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Julien Grall <jgrall@amazon.com>
CNTVCT_EL0 or CNTPCT_EL0 counter read in Cortex-A73 (all versions)
might return a wrong value when the counter crosses a 32bit boundary.
Until now, there is no case for Xen itself to access CNTVCT_EL0,
and it also should be the Guest OS's responsibility to deal with
this part.
But for CNTPCT, there exists several cases in Xen involving reading
CNTPCT, so a possible workaround is that performing the read twice,
and to return one or the other depending on whether a transition has
taken place.
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
Reviewed-by: Wei Chen <Wei.Chen@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The Cortex-A72 erratum #853709 is the same as the Cortex-A57
erratum #852523. As the latter is already workaround, we only
need to update the documentation.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
[julieng: Reworded the commit message]
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
This patch adds support for bundling the xen.efi hypervisor, the xen.cfg
configuration file, the Linux kernel and initrd, as well as the XSM,
and architectural specific files into a single "unified" EFI executable.
This allows an administrator to update the components independently
without requiring rebuilding xen, as well as to replace the components
in an existing image.
The resulting EFI executable can be invoked directly from the UEFI Boot
Manager, removing the need to use a separate loader like grub as well
as removing dependencies on local filesystem access. And since it is
a single file, it can be signed and validated by UEFI Secure Boot without
requring the shim protocol.
It is inspired by systemd-boot's unified kernel technique and borrows the
function to locate PE sections from systemd's LGPL'ed code. During EFI
boot, Xen looks at its own loaded image to locate the PE sections for
the Xen configuration (`.config`), dom0 kernel (`.kernel`), dom0 initrd
(`.ramdisk`), and XSM config (`.xsm`), which are included after building
xen.efi using objcopy to add named sections for each input file.
For x86, the CPU ucode can be included in a section named `.ucode`,
which is loaded in the efi_arch_cfg_file_late() stage of the boot process.
On ARM systems the Device Tree can be included in a section named
`.dtb`, which is loaded during the efi_arch_cfg_file_early() stage of
the boot process.
Note that the system will fall back to loading files from disk if
the named sections do not exist. This allows distributions to continue
with the status quo if they want a signed kernel + config, while still
allowing a user provided initrd (which is how the shim protocol currently
works as well).
This patch also adds constness to the section parameter of
efi_arch_cfg_file_early() and efi_arch_cfg_file_late(),
changes pe_find_section() to use a const CHAR16 section name,
and adds pe_name_compare() to match section names.
Signed-off-by: Trammell Hudson <hudson@trmm.net>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
[Fix ARM build by including pe.init.o]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
The Xenstore access commands (xenstore-*) have the possibility to limit
connection to Xenstore to a local socket (option "-s"). This is an
option making no sense at all, as either there is only a socket, so
the option would be a nop, or there is no socket at all (in case
Xenstore is running in a stubdom or the client is called in a domU),
so specifying the option would just lead to failure.
So drop that option completely.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
The manpage for 'xl' documents an option to force a block device to be
released even if the domain to which it is attached does not co-operate.
The documentation also states that, if the force flag is not specified, the
block-detach operation should fail.
Currently the force option is not implemented and a non-forced block-detach
will auto-force after a time-out of 10s. This patch implements the force
option and also stops auto-forcing a non-forced block-detach by calling
libxl_device_disk_safe_remove() rather than libxl_device_disk_remove(),
allowing the operation to fail cleanly as per the documented behaviour.
NOTE: The documentation is also adjusted since the normal positioning of
options is before compulsory parameters. It is also noted that use of
the --force option may lead to a guest crash.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Commit 858c0be8c2 "xen/arm: Enable CPU Erratum 1165522 for Neoverse"
added a new erratum but forgot to update silicon-errata.txt.
Update the file accordingly to keep track of errata workaround in Xen.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
This patch adds code to parse a value for MTU from the network configuration
if it is present. The documentation in xl-network-configuration.5.pod is
also modified accordingly.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
There is currently no documentation to state what MTU a frontend should
adertise to its network stack. It has however long been assumed that the
default value of 1500 is correct.
This patch specifies a mechanism to allow the tools to set the MTU via a
xenstore node in the frontend area and states that the absence of that node
means the frontend should assume an MTU of 1500 octets.
NOTE: The Windows PV frontend has used an MTU sampled from the xenstore
node specified in this patch.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wl@xen.org>
The runes for this manual osstest were wrong. It needs to run as
osstest, and cr-for-branches should be run from testing.git.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
The new format specifier is '%pp', and prints a pci_sbdf_t using the
seg:bus:dev.func format. Replace all SBDFs printed using
'%04x:%02x:%02x.%u' to use the new format specifier.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Julien Grall <julien.grall@arm.com>
For just the pieces where Jan is the only maintainer:
Acked-by: Jan Beulich <jbeulich@suse.com>
In docs/misc/hypfs-paths.pandoc the supported paths in the hypervisor
file system are specified. Make it more clear that path availability
might change, e.g. due to scope widening or narrowing (e.g. being
limited to a specific architecture).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Paul Durrant <paul@xen.org>
The specification of pvcalls suggests there is padding for 32-bit x86 at
the end of most the structure. However, they are not described in in the
public header.
Because of that all the structures would have a different size between
32-bit x86 and 64-bit x86.
For all the other architectures supported (Arm and 64-bit x86), the
structure have the sames sizes because they contain implicit padding
thanks to the 64-bit alignment of the field uint64_t field.
Given the specification is authoritative, the padding will now be the
same for all architectures. The potential breakage of compatibility is
ought to be fine as pvcalls is still a tech preview.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Paul Durrant <paul@xen.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
These files are in tree so that people can build (including from git)
without needing recent autotools.
We should update them periodically. Debian buster has been Debian
stable fopr a while. Our CI is running buster.
There should be no significant functional change; it's possible that
there are bugfixes to the configure scripts but I have not reviewed
them.
These files were last changed in
83c845033d
libxl: use vchan for QMP access with Linux stubdomain
where a new feature was added. However, that commit contains a lot of
extraneous noise in configure compared to its parent.
Compared to 83c845033dc8bb3a35ae245effb7832b6823174a~, this commit
restores those extraneous changes, leaving precisely the correct
changes. So one way of looking at the changes we are making now, is
that we are undoing accidental changes to the autoconf output.
I used Debian's autoconf 2.69-11 on amd64.
CC: Wei Liu <wl@xen.org>
CC: Nick Rosbrook <rosbrookn@gmail.com>
Reported-by: Nick Rosbrook <rosbrookn@gmail.com>
CC: Paul Durrant <paul@xen.org>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Paul Durrant <paul@xen.org>
`xl shutdown -w` waits for the first of either domain shutdown or death.
Shutdown is the halting of the guest operating system, and death is the
freeing of domain resources.
Allow specifying -w multiple times to wait for only domain death. This
is useful in scripts so that all resources are free before the script
continues.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Paul Durrant <paul@xen.org>
To combat the absence of mitigating microcode, arrange to hide RDRAND by
default on IvyBridge client hardware.
Adjust the default feature derivation to hide RDRAND on IvyBridge client
parts, unless `cpuid=rdrand` is explicitly provided.
Adjust the restore path in xc_cpuid_apply_policy() to not hide RDRAND from VMs
which migrated from pre-4.14.
In all cases, individual guests can continue using RDRAND if explicitly
enabled in their config files.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Paul Durrant <paul@xen.org>
Don't use "set -x" for the figs rule. It doesn't take effect in the recursive
make environment.
Turn the HTML manpage comments into makefile comments, not shell comments.
This saves 3x shell invocations per manpage.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Paul Durrant <paul@xen.org>
RDRAND/RDSEED can be hidden using cpuid= to mitigate SRBDS if microcode
isn't available.
This is part of XSA-320 / CVE-2020-0543.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
See patch documentation and comments.
This is part of XSA-320 / CVE-2020-0543
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Provide the implementation for newer pandoc json.
I have done an adhoc test and this now works on both buster and
stretch and seems to produce the expected support matrix when run
using the example rune (which processes unstable and 4.11).
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Paul Durrant <paul@xen.org>
Different pandoc versions generate, and expect, a different toplevel
structure for their json output and inpout. Newer pandoc's toplevel
is a hash. We are going to want to support this. We can tell what
kind of output we should produce by looking at the input we got (which
itself came from pandoc). So:
* Make space for code to read toplevel objects which are not arrays.
Currently this code is absent and we just die explicitly (rather
than dying because we tried to use a hashref as an array ref).
* Move generation of the toplevel json structure out of
pandoc2html_inline, and abstract it away through a subref which is
set up when we read the input file.
This is just prep work. No functional change other than a change to
an error message.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Paul Durrant <paul@xen.org>
The cronjob which renders https://xenbits.xen.org/docs/ has been broken for a
while. commitish_version() pulls an old version of xen/Makefile out of
history, and uses the xenversion rule.
Currently, this fails with:
tmp.support-matrix.xen.make:130: scripts/Kbuild.include: No such file or directory
which is because the Makefile legitimately references Kbuild.include with a
relative rather than absolute path.
Rework support-matrix-generate to use sed to extract the major/minor version,
rather than expecting xen/Makefile to be usable in a different tree.
Fixes: 945e80a730 ("docs: Provide support-matrix-generate, to generate a support matrix in HTML")
Backport: 4.11+
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Paul Durrant <paul@xen.org>
With all other plumbing in place, activate shadow stacks when possible.
Note that CET shares the similar problems to SMEP/SMAP with Ring1 being
supervisor to the processor, and that the layout of the shadow stack differs
between an IRET to Ring 1 and Ring 3. Therefore, we disable PV32 when CET is
enabled. Compatibility can be maintained if necessary via PV-Shim.
The BSP needs to wait until alternatives have run (to avoid interaction with
CR0.WP), and after the first reset_stack_and_jump() to avoid having a pristine
shadow stack interact in problematic ways with an in-use regular stack.
Activate shadow stack in reinit_bsp_stack().
APs have all infrastructure set up by the booting CPU, so enable shadow stacks
before entering C. Adjust the logic to call start_secondary rather than jump
to it, so stack traces make more sense.
The crash path needs to turn CET off to avoid interfering with the crash
kernel's environment.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Introduce CONFIG_HAS_AS_CET_SS to determine whether CET Shadow Stack
instructions are supported in the assembler, and CONFIG_XEN_SHSTK as the main
build option.
Introduce cet={no-,}shstk to for a user to select whether or not to use shadow
stacks at runtime, and X86_FEATURE_XEN_SHSTK to determine Xen's overall
enablement of shadow stacks.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
In Credit2 CPUs (can) share runqueues, depending on the topology. For
instance, with per-socket runqueues (the default) all the CPUs that are
part of the same socket share a runqueue.
On platform with a huge number of CPUs per socket, that could be a
problem. An example is AMD EPYC2 servers, where we can have up to 128
CPUs in a socket.
It is of course possible to define other, still topology-based, runqueue
arrangements (e.g., per-LLC, per-DIE, etc). But that may still result in
runqueues with too many CPUs on other/future platforms. For instance, a
system with 96 CPUs and 2 NUMA nodes will end up having 48 CPUs per
runqueue. Not as bad, but still a lot!
Therefore, let's set a limit to the max number of CPUs that can share a
Credit2 runqueue. The actual value is configurable (at boot time), the
default being 16. If, for instance, there are more than 16 CPUs in a
socket, they'll be split among two (or more) runqueues.
Note: with core scheduling enabled, this parameter sets the max number
of *scheduling resources* that can share a runqueue. Therefore, with
granularity set to core (and assumint 2 threads per core), we will have
at most 16 cores per runqueue, which corresponds to 32 threads. But that
is fine, considering how core scheduling works.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This is partly to adjust the description of 'k' and 's' seeing as they have
changed, but mostly restructuring the information for clarity.
In particular, use indentation to clearly separate the areas discussing libxl
format from xend format. In addition, extend the xend format section to
discuss subleaf notation.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Jan Beulich
Maximilian Engelhardt
Luca Fancellu
Wei Liu
Paul Durrant
Juergen Gross
Roger Pau Monne
Igor Druzhinin
Diederik de Haas
Bertrand Marquis
Michal Orzel
Penny Zheng
Olaf Hering
Trammell Hudson
Julien Grall
Ian Jackson
Andrew Cooper
Jason Andryuk
Dario Faggioli