Add deviation to address violations of MISRA C:2012 Directive 4.10
("Precautions shall be taken in order to prevent the contents of a
header file being included more than once").
This deviation suppresses the violation arising from autogenerated file
xen/include/generated/autoconf.h
No functional change.
Signed-off-by: Alessandro Zucchelli <alessandro.zucchelli@bugseng.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
SMR masking support allows deriving a mask either using a 2-cell iommu
specifier (per master) or stream-match-mask SMMU dt property (global
config). Even though the mask is stored in the fwid when adding a
device (in arm_smmu_dt_xlate_generic()), we still set it to 0 when
allocating SMEs (in arm_smmu_master_alloc_smes()). So at the end, we
always ignore the mask when programming SMRn registers. This leads to
SMMU failures. Fix it by completing the support.
A bit of history:
Linux support for SMR allocation was mainly done with:
588888a7399d ("iommu/arm-smmu: Intelligent SMR allocation")
021bb8420d44 ("iommu/arm-smmu: Wire up generic configuration support")
Taking the mask into account in arm_smmu_master_alloc_smes() was added
as part of the second commit, although quite hidden in the thicket of
other changes. We backported only the first patch with: 0435784cc7
("xen/arm: smmuv1: Intelligent SMR allocation") but the changes to take
the mask into account were missed.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
All versions of Cortex-A53 cores are affected by the speculative
AT instruction erratum, as mentioned in the Cortex-A53 Revision r0
SDEN v21 documentation.
Enabled ARM64_WORKAROUND_AT_SPECULATE for all versions of Cortex-A53
cores, to avoid corrupting the TLB if performing a speculative AT
instruction during a guest context switch.
Signed-off-by: Andrei Cherechesu <andrei.cherechesu@nxp.com>
Acked-by: Julien Grall <jgrall@amazon.com>
The AMD container format has no formal spec. It is, at best, precision
guesswork based on AMD's prior contributions to open source projects. The
Equivalence Table has both an explicit length, and an expectation of having a
NULL entry at the end.
Xen was sanity checking the NULL entry, but without confirming that an entry
was present, resulting in a read off the front of the buffer. With some
manual debugging/annotations this manifests as:
(XEN) *** Buf ffff83204c00b19c, eq ffff83204c00b194
(XEN) *** eq: 0c 00 00 00 44 4d 41 00 00 00 00 00 00 00 00 00 aa aa aa aa
^-Actual buffer-------------------^
(XEN) *** installed_cpu: 000c
(XEN) microcode: Bad equivalent cpu table
(XEN) Parsing microcode blob error -22
When loaded by hypercall, the 4 bytes interpreted as installed_cpu happen to
be the containing struct ucode_buf's len field, and luckily will be nonzero.
When loaded at boot, it's possible for the access to #PF if the module happens
to have been placed on a 2M boundary by the bootloader. Under Linux, it will
commonly be the end of the CPIO header.
Drop the probe of the NULL entry; Nothing else cares. A container without one
is well formed, insofar that we can still parse it correctly. With this
dropped, the same container results in:
(XEN) microcode: couldn't find any matching ucode in the provided blob!
Fixes: 4de936a38a ("x86/ucode/amd: Rework parsing logic in cpu_request_microcode()")
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
All registration is done at boot. Almost...
iommu_dump_page_tables() is registered in iommu_hwdom_init(), which is called
twice when LATE_HWDOM is in use.
register_irq_keyhandler() has an ASSERT() guarding againt multiple
registration attempts, and the absence of bug reports hints at how many
configurations use LATE_HWDOM in practice.
Move the registration into iommu_setup() just after printing the overall
status of the IOMMU. For starters, the hardware domain is specifically
excluded by iommu_dump_page_tables().
ept_dump_p2m_table is registered in setup_ept_dump() which is non-__init, but
whose sole caller, start_vmx(), is __init. Move setup_ept_dump() to match.
With these two tweeks, all keyhandler reigstration is from __init functions,
so register_{,irq_}keyhandler() can move, and key_table[] can become
__ro_after_init.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Current blkif implementations (both backends and frontends) have all slight
differences about how they handle the 'sector-size' xenstore node, and how
other fields are derived from this value or hardcoded to be expressed in units
of 512 bytes.
To give some context, this is an excerpt of how different implementations use
the value in 'sector-size' as the base unit for to other fields rather than
just to set the logical sector size of the block device:
│ sectors xenbus node │ requests sector_number │ requests {first,last}_sect
────────────────────────┼─────────────────────┼────────────────────────┼───────────────────────────
FreeBSD blk{front,back} │ sector-size │ sector-size │ 512
────────────────────────┼─────────────────────┼────────────────────────┼───────────────────────────
Linux blk{front,back} │ 512 │ 512 │ 512
────────────────────────┼─────────────────────┼────────────────────────┼───────────────────────────
QEMU blkback │ sector-size │ sector-size │ sector-size
────────────────────────┼─────────────────────┼────────────────────────┼───────────────────────────
Windows blkfront │ sector-size │ sector-size │ sector-size
────────────────────────┼─────────────────────┼────────────────────────┼───────────────────────────
MiniOS │ sector-size │ 512 │ 512
An attempt was made by 67e1c050e3 in order to change the base units of the
request fields and the xenstore 'sectors' node. That however only lead to more
confusion, as the specification now clearly diverged from the reference
implementation in Linux. Such change was only implemented for QEMU Qdisk
and Windows PV blkfront.
Partially revert to the state before 67e1c050e3 while adjusting the
documentation for 'sectors' to match what it used to be previous to
2fa701e534:
* Declare 'feature-large-sector-size' deprecated. Frontends should not expose
the node, backends should not make decisions based on its presence.
* Clarify that 'sectors' xenstore node and the requests fields are always in
512-byte units, like it was previous to 2fa701e534 and 67e1c050e3.
All base units for the fields used in the protocol are 512-byte based, the
xenbus 'sector-size' field is only used to signal the logic block size. When
'sector-size' is greater than 512, blkfront implementations must make sure that
the offsets and sizes (despite being expressed in 512-byte units) are aligned
to the logical block size specified in 'sector-size', otherwise the backend
will fail to process the requests.
This will require changes to some of the frontends and backends in order to
properly support 'sector-size' nodes greater than 512.
Fixes: 2fa701e534 ('blkif.h: Provide more complete documentation of the blkif interface')
Fixes: 67e1c050e3 ('public/io/blkif.h: try to fix the semantics of sector based quantities')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
... and move the type itself to linux-compat.h.
While doing so switch a few adjacent types as well, for (a little bit
of) consistency.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
... and move the type itself to linux-compat.h.
While doing so switch an adjacent x86 struct page_info field to bool.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Xen always generates an XSDT table even if the firmware only provided an
RSDT table. Copy the RSDT header from the firmware table, adjusting the
signature, for the XSDT table when not provided by the firmware.
This is necessary to run Xen on QEMU.
Fixes: 1d74282c45 ('x86: setup PVHv2 Dom0 ACPI tables')
Suggested-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
No user of the hook exists anymore.
While touching hvm_mmio_internal() also make direction of the request
explicit - it only so happens that IOREQ_WRITE is zero. Yet it being a
write is imperative for stdvga.c to "accept" the request.
Requested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
No state is left to protect. It being the last field, drop the struct
itself as well. Similarly for then ending up empty, drop the .complete
handler.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
No uses are left, hence its setup, teardown, and the field itself can
also go away. stdvga_deinit() is then empty and can be dropped as well.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
No consumers are left, hence the producer and the fields themselves can
also go away. stdvga_outb() is then useless, rendering stdvga_out()
useless as well. Hence the entire I/O port intercept can go away.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
No consumers are left, hence the producer and the array itself can also
go away. The static sr_mask[] is then orphaned and hence needs dropping,
too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
No consumers are left, hence the producer and the array itself can also
go away. The static gr_mask[] is then orphaned and hence needs dropping,
too.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
All read accesses are rejected by the ->accept handler, while writes
bypass the bulk of the function body. Drop the dead code, leaving an
assertion in the read handler.
A number of other static items (and a macro) are then unreferenced and
hence also need (want) dropping. The same applies to the "latch" field
of the state structure.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Two of its consumers are dead (in compile-time constant conditionals)
and the only remaining ones are merely controlling debug logging. Hence
the field is now pointless to set, which in particular allows to get rid
of the questionable conditional from which the field's value was
established (afaict 551ceee975 ["x86, hvm: stdvga cache always on"]
had dropped too much of the earlier extra check that was there, and
quite likely further checks were missing).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
While ->count will only be different from 1 for "indirect" (data in
guest memory) accesses, it being 1 does not exclude the request being an
"indirect" one. Check both to be on the safe side, and bring the ->count
part also in line with what ioreq_send_buffered() actually refuses to
handle.
Fixes: 3bbaaec09b ("x86/hvm: unify stdvga mmio intercept with standard mmio intercept")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Unconditionally wire this through the ->rmw() hook. Since x86_emul_rmw()
now wants to construct and invoke a stub, make stub_exn available to it
via a new field in the emulator state structure.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
MISRA Rule 20.7 states:
"Expressions resulting from the expansion of macro parameters
shall be enclosed in parentheses".
The files imported from the gnu-efi package are already deviated, yet
the macro NextMemoryDescriptor is used in non-excluded code, so a further
deviation is needed to exclude also any expansion of the macro.
No functional change.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Remove comment-based deviations since a project wide deviation that
cover such cases is present.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
MISRA C:2012 Rule 20.7 states that "Expressions resulting from the
expansion of macro parameters shall be enclosed in parentheses".
The rational of the rule is that if a macro argument expands to an
expression, there may be problems related to operator precedence, e.g.,
define M(A, B) A * B
M(1+1, 2+2) will expand to: 1+1 * 2+2
Update ECLAIR configuration to tag as 'safe' the expansions of macro
arguments surrounded tokens '{', '}' and ';', since in their presence
problems related to operator precedence can not occur.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
MISRA C Rule 18.2 states: "Subtraction between pointers shall
only be applied to pointers that address elements of the same array".
Subtractions between pointer where at least one symbol is a
symbol defined by the linker are safe and thus deviated, because
the compiler cannot exploit the undefined behaviour that would
arise from violating the rules in this case.
To create an ECLAIR configuration that contains the list of
linker-defined symbols, the script "linker-symbols.sh" is used
after a build of xen (without static analysis) is performed.
The generated file "linker_symbols.ecl" is then used as part of the
static analysis configuration.
Additional changes to the ECLAIR integration are:
- perform a build of xen without static analysis during prepare.sh
- run the scripts to generated ECL configuration during the prepare.sh,
rather than analysis.sh
- export ECLAIR_PROJECT_ROOT earlier, to allow such generation
Additionally, the macro page_to_mfn performs a subtraction that is safe,
so its uses are deviated.
No functional changes.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Prior to bd1664db7b ("xen/bitops: Introduce a multiple_bits_set() helper")
the definition of {COMPILE,RUNTIME}_CHECK was fully compliant with respect
to MISRA C Rule 20.7:
"Expressions resulting from the expansion of macro parameters shall be
enclosed in parentheses."
However, to allow testing function-like macros, parentheses on the "fn"
parameter were removed and thus new violations of the rule have been
introduced. Given the usefulness of this functionality,
it is deemed ok to deviate these two macros for this rule, because
their scope of (direct) usage is limited to just the file where they
are defined, and the possibility of misuses is unlikely.
No functional change.
Fixes: bd1664db7b ("xen/bitops: Introduce a multiple_bits_set() helper")
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The current hypercall interfaces to manage and assign interrupts to
domains is mostly based in using pIRQs as handlers. Such pIRQ values
are abstract domain-specific references to interrupts.
Classic HVM domains can have access to {,un}map_pirq hypercalls if the
domain is allowed to route physical interrupts over event channels.
That's however a different interface, limited to only mapping
interrupts to itself. PVH domains on the other hand never had access
to the interface, as PVH domains are not allowed to route interrupts
over event channels.
In order to allow setting up PCI passthrough from a PVH domain it
needs access to the {,un}map_pirq hypercalls so interrupts can be
assigned a pIRQ handler that can then be used by further hypercalls to
bind the interrupt to a domain.
Note that the {,un}map_pirq hypercalls end up calling helpers that are
already used against a PVH domain in order to setup interrupts for the
hardware domain when running in PVH mode. physdev_map_pirq() will
call allocate_and_map_{gsi,msi}_pirq() which is already used by the
vIO-APIC or the vPCI code respectively. So the exposed code paths are
not new when targeting a PVH domain, but rather previous callers are
not hypercall but emulation based.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Since 68e1183411 ("libxc: introduce a xc_dom_arch for hvm-3.0-x86_32
guests"), HVM guests are built using XEN_DOMCTL_sethvmcontext, which
ends up disabling stdvga caching because of arch_hvm_load() being
involved in the processing of the request. With that the field is
useless, and can be dropped. Drop the helper functions manipulating /
checking as well right away, but leave the use sites of
stdvga_cache_is_enabled() with the hard-coded result the function would
have produced, to aid validation of subsequent dropping of further code.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Address a violation of MISRA C:2012 Rule 16.3:
"An unconditional `break' statement shall terminate every
switch-clause".
No functional change.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Address a violation of MISRA C:2012 Rule 16.3:
"An unconditional `break' statement shall terminate every
switch-clause".
No functional change.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
The rule disallows the usage of an identifier reserved by the C standard.
All identfiers starting with '__' are reserved for any use, so the label
can be renamed in order to avoid the violation.
No functional change.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Signed-off-by: Alessandro Zucchelli <alessandro.zucchelli@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Rule 7.3 states:
"The lowercase character l shall not be used in a literal suffix",
but the INTEL_MSR_RANGE macro uses the "ull" suffix.
The "u" is transformed in uppercase for consistency.
No functional change.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Adding such probing allows to clearly separate init vs runtime code, and to
place the probing logic into the init section for the CMOS case. Note both
the Xen shared_info page wallclock, and the EFI wallclock don't really have any
probing-specific logic. The shared_info wallclock will always be there if
booted as a Xen guest, while the EFI_GET_TIME method probing relies on checking
if it returns a value different than 0.
The panic message printed when Xen is unable to find a viable wallclock source
has been adjusted slightly, I believe the printed guidance still provides the
same amount of information to the user.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Rename cmos_rtc_probe to opt_cmos_rtc_probe in order to better describe it
being a command line option, and rename cmos_probe() function to
cmos_rtc_probe().
Also move opt_cmos_rtc_probe to being a static global variable in preparation
for further changes that will require the variable being global to the file.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This addresses violations of MISRA C:2012 Rule 5.3 which states as
following: An identifier declared in an inner scope shall not hide an
identifier declared in an outer scope.
In /x86/mm.c the object struct e820entry *e820 hides an identifier
with the same name declared in x86/include/asm/e820.h.
No functional change.
Signed-off-by: Alessandro Zucchelli <alessandro.zucchelli@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
According to GIC spec IHI 0069H.b (12.4.9), the ListRegs field of
ICH_VTR_EL2 can have value between 0b00000..0b01111, as there can
be maximum 16 LRs (field value + 1). Fix the mask used to extract this
value which wrongly assumes there can be 64 (case for GICv2).
Fixes: bc183a0235 ("xen/arm: Add support for GIC v3")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
The test showed unreliable behavior due to unsupported console settings.
Update the baud rate used to connect to the UART.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Pass xen-ucode flags to do low level checks on microcode version and utilize
it to allow for microcode downgrade or reapply the same version of the
microcode. ucode_force is required to be passed to a low level Intel and AMD
for version checks to be done.
While adding ucode_force, opt_ucode_allow_same was removed. Remove
opt_ucode_allow_same from documentation.
Update CHANGELOG.md for opt_ucode_allow_same removal.
Signed-off-by: Fouad Hilly <fouad.hilly@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Lots of files were picking these up transitively, including lib.h
However, lib.h needs __read_mostly for printk_once() and this has the side
effect of kicking the transitive can down the road.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
probe.c includes a large number of headers which are unused, and not from
churn so far as I can see in history. Strip back to a reasonable set.
One complication is that genapic.h has to include xen/cpumask.h because
there's no way to forward declare a cpumask_t.
Also strip trailing whitespace while adjusting the file.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Alessandro Zucchelli
Michal Orzel
Andrei Cherechesu
Demi Marie Obenour
Andrew Cooper
Jan Beulich
Roger Pau Monné
Stefano Stabellini
Nicola Vetrini
Federico Serafini
Jiqian Chen
Victor Lira
Fouad Hilly