The PCI device irq is read with fscanf(%u). Switch the irq variable to
unsigned int to match.
Linux driver/pci/pci-sysfs.c:irq_show() uses %u to print the value.
However, unsigned int irq doesn't compile because of:
error: pointer targets in passing argument 4 of 'xc_physdev_map_pirq' differ in signedness [-Werror=pointer-sign]
Add int pirq to provide the desired type instead of re-using irq.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
A PCI device's irq field is an 8-bit number. A value of 0xff indicates
that the device IRQ is not connected. Additionally, the Linux ACPI code
can convert these 0xff values to IRQ_NOTCONNECTED(0x80000000) because
"0x80000000 is guaranteed to be outside the available range of
interrupts and easy to distinguish from other possible incorrect
values." When the hypercall to assign that IRQ fails, device
passthrough as a whole fails.
Add checking for a valid IRQ and skip the IRQ handling for PCI devices
outside that range. This allows for passthrough of devices without
legacy IRQs.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
`QEMU_XEN_PATH` will be configured as `qemu-system-i386` with no clue where, if
`--with-system-qemu` is set without giving a path (as matched in the case `yes`
but not `*`). However, the existence of the executable is checked by `access()`,
that will not look for anywhere in $PATH but the current directory. And since it
is possible for `qemu-system-i386` (or any other configured values) to be
executed from PATH later, we'd better find that in PATH and return the full path
for the caller to check against.
Signed-off-by: Hongbo <hehongbo@mail.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
[Initialise `saveptr` to NULL]
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
These wrappers simply hide a deference, which adds to the cognitive complexity
of reading the code. As such, they're not going to be included in the new
byteswap infrastructure.
No functional change.
Signed-off-by: Lin Liu <lin.liu@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
From their introduction all xc_hypercall_bounce_pre() uses, when they
failed, would properly cause exit from the function including cleanup,
yet without informing the caller of the failure. Purge the unlock_1
label for being both pointless and mis-named.
An earlier attempt to switch to the usual split between return value and
errno wasn't quite complete.
HWP work made the cleanup of the "available governors" array
conditional, neglecting the fact that the condition used may not be the
condition that was used to allocate the buffer (as the structure field
is updated upon getting back EAGAIN). Since cleanup can be done even if
no buffer was allocated, drop the conditional there again.
Fixes: 4513025a87 ("libxc: convert sysctl interfaces over to hypercall buffers")
Amends: 73367cf3b4 ("libxc: Fix xc_pm API calls to return negative error and stash error in errno")
Fixes: 31e264c672 ("pmstat&xenpm: Re-arrage for cpufreq union")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Now that common-macros.h has STR() available, which is even slightly
more flexible, use that and drop the custom macros.
No difference in generated code (except for line numbers, of course,
where embedded in code/data).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
`QEMU_XEN_PATH` will be configured as `qemu-system-i386` with no clue where, if
`--with-system-qemu` is set without giving a path (as matched in the case `yes`
but not `*`). However, the existence of the executable is checked by `access()`,
that will not look for anywhere in $PATH but the current directory. And since it
is possible for `qemu-system-i386` (or any other configured values) to be
executed from PATH later, we'd better find that in PATH and return the full path
for the caller to check against.
Signed-off-by: Hongbo <hehongbo@mail.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
It makes no sense to request for preprocessor only output and also request
object file generation. Fix the _libxl.api-for-check target to only use
-E (preprocessor output).
Also Clang 20.0 reports an error if both options are used.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Fixes: 2862bf5b6c ('libxl: enforce prohibitions of internal callers')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
We are missing a way to detect whether a user provided a value for
nr_spis equal to 0 or did not provide any value (default is also 0) which
can cause issues when calculated nr_spis is > 0 and the value from domain
config is 0. Fix it by setting default value for nr_spis to newly added
LIBXL_NR_SPIS_DEFAULT i.e. UINT32_MAX (max supported nr of SPIs is 960
anyway).
Fixes: 55d62b8d46 ("tools/arm: Reject configuration with incorrect nr_spis value")
Reported-by: Luca Fancellu <luca.fancellu@arm.com>
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Commit cefeffc7e5 marked ACPI tables as NVS in the hvmloader path
because SeaBIOS may otherwise just mark it as RAM. There is, however,
yet another reason to do it even in the PVH path. Xen's incarnation of
AML relies on having access to some ACPI tables (e.g: _STA of Processor
objects relies on reading the processor online bit in its MADT entry)
This is problematic if the OS tries to reclaim ACPI memory for page
tables as it's needed for runtime and can't be reclaimed after the OSPM
is up and running.
Fixes: de6d188a51 ("hvmloader: flip "ACPI data" to "ACPI NVS" type for ACPI table region)"
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
A PCI device may not have a legacy IRQ. In that case, we don't need to
do anything, so don't fail in libxl__arch_hvm_map_gsi() and
libxl__arch_hvm_unmap_gsi().
Requires an updated pciback to return -ENOENT.
Fixes: f97f885c71 ("tools: Add new function to do PIRQ (un)map on PVH dom0")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
It is valid for a PCI device to not have a legacy IRQ. In that case, do
not print an error to keep the logs clean.
This relies on pciback being updated to return -ENOENT for a missing
GSI.
Fixes: b93e5981d2 ("tools: Add new function to get gsi from dev")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Infinitely retrying the rmdir() invocation makes little sense. While the
original observation was the log filling the disk (due to repeated
"Directory not empty" errors, in turn occurring for unclear reasons),
the loop wants breaking even if there was no error message being logged
(much like is done in the similar loops in libxl__remove_file() and
libxl__remove_file_or_directory()).
Fixes: c4dcbee67e ("libxl: provide libxl__remove_file et al")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
If the calculated value for nr_spis by the toolstack is bigger than the
value provided by the user, we silently ignore the latter. This is not
consistent with the approach we have in Xen on Arm when we try to reject
incorrect configuration. Also, the documentation for nr_spis is
incorrect as it mentions 991 as the number of max SPIs, where it should
be 960 i.e. (1020 - 32) rounded down to the nearest multiple of 32.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
xs_get_domain_path() can be simplified by using single_with_domid().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
In order to have a stable interface in user land for using stable
domctl and possibly later sysctl interfaces, add a new library
libxenmanage.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
The corresponding code in the Xen qemu repository was not applied from
qemu-xen-4.18.0.
Signed-off-by: James Dingwall <james@dingwall.me.uk>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
... which converts binary content to hex automatically.
Update libxl to match. No API/ABI change.
This removes a latent libxl bug for cases when the buildid is longer than 4092
bytes.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
... which uses XENVER_extraversion2.
In order to do this sensibly, use manual hypercall buffer handling. Not only
does this avoid an extra bounce buffer (we need to strip the xen_varbuf_t
header anyway), it's also shorter and easlier to follow.
Update libxl and the ocaml stubs to match. No API/ABI change in either.
With this change made, `xl info` can now correctly access a >15 char
extraversion:
# xl info xen_version
4.18-unstable+REALLY LONG EXTRAVERSION
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
kexec-tools uses xc_version(), meaning that it is not a private API. As we're
going to extend the functionality substantially, move it to its own file.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Add a new "llc_colors" parameter that defines the LLC color assignment for
a domain. The user can specify one or more color ranges using the same
syntax used everywhere else for color config described in the
documentation.
The parameter is defined as a list of strings that represent the color
ranges.
Documentation is also added.
Golang bindings are regenerated.
Based on original work from: Luca Miccio <lucmiccio@gmail.com>
Signed-off-by: Carlo Nonato <carlo.nonato@minervasys.tech>
Signed-off-by: Marco Solieri <marco.solieri@minervasys.tech>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Decompressing the kernel is necessary to inspect the ELF notes, but the
dombuilder will gunzip() secondary modules too. Specifically gunzip(), no
other decompression algorithms.
This may have been necessary in the dim and distant past, but it is broken
today. Linux specifically supports concatenating CPIO fragments of differing
compressions, and any attempt to interpret it with a single algorithm may
corrupt later parts.
This was an unexpected discovery while trying to test Xen's gunzip()
logic (Xen as a PVH guest, with a gzipped XTF kernel as dom0).
Interpreting secondary modules should be left as an exercise to the guest.
This reduces work done in dom0.
This is not expected to cause a practical difference to guests these days.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Instead of having to include xenctrl.h for getting definitions of cpu
barriers, add a dedicated header for that purpose.
Switch the xen-9pfsd daemon to use the new header instead of xenctrl.h.
This is in preparation of making Xenstore independent from libxenctrl.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
xc_cpuid_apply_policy() provides compatibility for migration of a pre-4.14 VM
where no CPUID data was provided in the stream.
It guesses the various max-leaf limits, based on what was true at the time of
writing, but this was not correctly adapted when speculative security issues
forced the advertisement of new feature bits. Of note are:
* LFENCE-DISPATCH, in leaf 0x80000021.eax
* BHI-CTRL, in leaf 0x7[2].edx
In both cases, a VM booted on a security-patched Xen 4.13, and then migrated
on to any newer version of Xen on the same or compatible hardware would have
these features stripped back because Xen is still editing the cpu-policy for
sanity behind the back of the toolstack.
For VMs using BHI_DIS_S to mitigate Native-BHI, this resulted in a failure to
restore the guests MSR_SPEC_CTRL setting:
(XEN) HVM d7v0 load MSR 0x48 with value 0x401 failed
(XEN) HVM7 restore: failed to load entry 20/0 rc -6
Fixes: e9b4fe2636 ("x86/cpuid: support LFENCE always serialising CPUID bit")
Fixes: f3709b15fc ("x86/cpuid: Infrastructure for cpuid word 7:2.edx")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Consider also "Display controller" an IGD, not only "VGA compatible
controller". Specifically, IGD on Raptor Lake has 0x038000 class, not
0x030000.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
First instroduce a manifest constant, to avoid open-coding 64 in several
places. Then use this constant to bound the allocation.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
We have libxl_ctxt.page_size for this purpose; use it to eliminate a
latent buffer overrun.
Fixes: 14c0d328da ("libxl/acpi: Build ACPI tables for HVMlite guests")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
xl/libxl memory is leaking into a PVH guest through uninitialized
portions of the ACPI tables.
Use libxl_zalloc() to obtain zero-ed memory to avoid this issue.
This is XSA-464 / CVE-2024-45819.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Fixes: 14c0d328da ("libxl/acpi: Build ACPI tables for HVMlite guests")
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Clang 19 complains with the following error when building libxl:
libxl_utils.c:48:15: error: variable length array folded to constant array as an extension [-Werror,-Wgnu-folding-constant]
48 | char path[strlen("/local/domain") + 12];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace the usage of strlen() with sizeof, which allows the literal
string length to be known at build time. Note sizeof accounts for the
NUL terminator while strlen() didn't, hence subtract 1 from the total
size calculation.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
In order to be able to use the xenlibs-dependencies macro from stubdom
build, move it to tools/libs/uselibs.mk, which is included from
current users and stubdom/Makefile.
No functional change intended.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
When dom0 is PVH, and passthrough a device to dumU, xl will
use the gsi number of device to do a pirq mapping, see
pci_add_dm_done->xc_physdev_map_pirq, but the gsi number is
got from file /sys/bus/pci/devices/<sbdf>/irq, that confuses
irq and gsi, they are in different space and are not equal,
so it will fail when mapping.
To solve this issue, to get the real gsi and add a new function
xc_physdev_map_pirq_gsi to get a free pirq for gsi.
Note: why not use current function xc_physdev_map_pirq, because
it doesn't support to allocate a free pirq, what's more, to
prevent changing it and affecting its callers, so add
xc_physdev_map_pirq_gsi.
Besides, PVH dom0 doesn't have PIRQs flag, it doesn't do
PHYSDEVOP_map_pirq for each gsi. So grant function callstack
pci_add_dm_done->XEN_DOMCTL_irq_permission will fail at function
domain_pirq_to_irq. And old hypercall XEN_DOMCTL_irq_permission
requires passing in pirq, it is not suitable for PVH dom0 that
doesn't have PIRQs to grant irq permission.
To solve this issue, use the another hypercall
XEN_DOMCTL_gsi_permission to grant the permission of irq(
translate from gsi) to dumU when dom0 has no PIRQs.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Chen Jiqian <Jiqian.Chen@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
On PVH dom0, when passthrough a device to domU, QEMU and xl tools
want to use gsi number to do pirq mapping, see QEMU code
xen_pt_realize->xc_physdev_map_pirq, and xl code
pci_add_dm_done->xc_physdev_map_pirq, but in current codes, the gsi
number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different
spaces, so pirq mapping fails.
And in current codes, there is no method to get gsi for userspace.
For above purpose, add new function to get gsi, and the
corresponding ioctl is implemented on linux kernel side.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Chen Jiqian <Jiqian.Chen@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
This is mostly Linux style. Make the file self-consistent. Drop trailing
whitespace, and use tabs consistently.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
There's no need for the name to be so verbose.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Despite its name, libxl_xen_console_read_line() does not read a line,
it fills the buffer with as many characters as fit. Update the
documentation to reflect the real behaviour of the function. Rename
line_r to avoid confusion since it is a pointer to an array of
characters.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
When reading the console, xen overwrites the contents of the buffer,
so there is no need to zero the buffer before passing it to xen.
Instead, add a NULL at the end of the buffer.
While we are at it, change the zalloc() of the buffer back to
malloc() as it was before bdf4131 (libxl: don't leak buf in
libxl_xen_console_read_start error handling, 2013-12-03). The comment
in that commit message says that the intent of the commit was to
change malloc+memset to zalloc(), but only for the
libxl_xen_console_reader struct, not for the buffer.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
When built with ASAN, "xl dmesg" crashes in the "printf("%s", line)"
call in main_dmesg(). ASAN reports a heap buffer overflow: an
off-by-one access to cr->buffer.
The readconsole sysctl copies up to count characters into the buffer,
but it does not add a null character at the end. Despite the
documentation of libxl_xen_console_read_line(), line_r is not
nul-terminated if 16384 characters were copied to the buffer.
Fix this by asking xc_readconsolering() to fill the buffer up to size
- 1. As the number of characters in the buffer is only needed in
libxl_xen_console_read_line(), make it a local variable there instead
of part of the libxl__xen_console_reader struct.
Fixes: 4024bae739 ("xl: Add subcommand 'xl dmesg'")
Reported-by: Edwin Török <edwin.torok@cloud.com>
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
"-runas" is deprecated since QEMU 9.1 and will be remove in a future
release.
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
QEMU 9.0 have removed "-chroot" command line option, which have been
deprecated since QEMU 8.1 in favor of "-run-with chroot=dir".
Look into the result of the QMP command "query-command-line-options"
to find out if "-run-with chroot=dir" is available. Then use it in
place of "-chroot".
Resolves: xen-project/xen#187
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Starting with QEMU 9.0, the option "-chroot", that we use for the
"dmrestrict" feature, is removed. We need to find out which to use
between "-chroot" and "-run-with chroot=dir".
This patch implement the machinery to spawn QEMU, and to run the QMP
command "query-command-line-options" but doesn't yet look at the
actual result. Whether or not to use "-run-with chroot=dir" will be
implemented in a follow up patch.
The command line used to spawn the qemu we want to probe is mostly
similar to the one we already use for the device model, "-machine
none" comes from libvirt.
This patch implement the probing on qemu-xen, even if we probably not
going to use the result. We could check the feature wanted for the
domain being created, but this could get complicated fairly quickly.
We already need to check the options "b_info->dm_restrict" for
"-chroot" and "state->dm_runas" for "-runas" (which is deprecated).
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Introduce a --force option to xen-ucode, in order to bypass certain checks
when applying microcode.
Update libxc's xc_microcode_update() to take an extra parameter, and to use
the new XENPF_microcode_update2 hypercall instead.
Signed-off-by: Fouad Hilly <fouad.hilly@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tool chains with -Wshadow enabled by default won't like the function
parameter name "abs", for aliasing stdlib.h's abs(). Rename the
parameter to what other similar functions use.
Fixes: a18b50614d ("libxl: Enable stubdom cdrom changing")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
To change the cd-rom medium, libxl will:
- QMP eject the medium from QEMU
- block-detach the old PV disk
- block-attach the new PV disk
- QMP change the medium to the new PV disk by fdset-id
The QMP code is reused, and remove and attach are implemented here.
The stubdom must internally handle adding /dev/xvdc to the appropriate
fdset. libxl in dom0 doesn't see the result of adding to the fdset as
that is internal to the stubdom, but the fdset's opaque fields will be
set to stub-devid:$devid, so libxl can identify it. $devid is common
between the stubdom and libxl, so it can be identified on both side.
The stubdom will name the device xvdY regardless of the guest name hdY,
sdY, or xvdY, but the stubdom will be assigned the same devid
facilitating lookup. Because the stubdom add-fd call is asynchronous,
libxl needs to poll query-fdsets to identify when add-fd has completed.
For cd-eject, we still need to attach the empty vbd. This is necessary
since xenstore is used to determine that hdc exists. Otherwise after
eject, hdc would be gone and the cd-insert would fail to find the drive
to insert new media.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Jason Andryuk
Hongbo
Lin Liu
Jan Beulich
Roger Pau Monne
Michal Orzel
Alejandro Vallejo
Andrew Cooper
Juergen Gross
James Dingwall
Carlo Nonato
Marek Marczykowski-Górecki
Jiqian Chen
Javi Merino
Anthony PERARD
Anthony PERARD
Fouad Hilly
Jason Andryuk