The QEMU community has asked us to change QMP command
xen-get-replication-error to query-xen-replication-status. Modify Xen
side to use the new name.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The QEMU community has asked us to change the QMP command from
xen-do-checkpoint to xen-colo-do-checkpoint. Modify Xen side to use
the new name.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Splitting up libxl.c will require two functions to be globally visible.
Add their prototypes to libxl_internal.h.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Creating a domain with an invalid controller specification for a pvusb
device will currently segfault.
Avoid this by bailing out early in case of a mandatory xenstore path
not existing.
Signed-of-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
These functions should be used to log messages when the domain
id is known. libxl__log will now prepend the log message by
"Domain %PRIu32:" if the domain id is a valid one.
This aims at helping consumers filter logs on domain IDs.
Signed-off-by: Cédric Bosdonnat <cbosdonnat@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Here it adds the ACPI tables size to set the target maxmem to avoid
providing less available memory for guest.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The guest kernel will get the event channel interrupt information via
domain param HVM_PARAM_CALLBACK_IRQ. Initialize it here.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Since the existing configuration option "u.hvm.acpi" is x86 specific and
we want to reuse it on ARM as well, add a unified option "acpi" for
x86 and ARM, and for ARM it's disabled by default.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Only define BUILD_BUG_ON when there isn't one already, because mini-os
currently leaks that.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add a new xl command "qemu-monitor-command" to issue arbitrary commands
to a domain's device model. Syntax is:
xl qemu-monitor-command <domain> <command>
The command is issued via qmp human-monitor-command command. Any
information returned by the command is printed to stdout.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Instead of passing the array size as an argument when calling
libxl__xs_kvs_of_flexarray() let the function get the size from the
array instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a function libxl__qmp_run_command_flexarray() to run a qmp command
with an array of arguments. The arguments are name-value pairs stored
in a flexarray.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Blktap2 is effectively dead code for a few years.
Notable changes in this patch:
0. Unhook blktap2 from build system
1. Now libxl no longer supports TAP disk backend, appropriate assertions
are added and some code paths now return ERROR_FAIL
2. Tap is no longer a supported backend in doc
3. Remove relevant entries in MAINTAINERS
A patch to actually remove blktap2 directory will come later.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <George.Dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The path to the BIOS blob can be overriden by the xl's
bios_path_override option, or provided by u.hvm.bios_firmware in the
domain_build_info struct by other libxl user.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxl_set_memory_target() and several other interface functions of
libxl use a 32 bit sized parameter for a memory size value in kBytes.
This limits the maximum size to be passed in such a parameter
depending on signedness of the parameter to 2TB or 4TB.
Correct this by using 64 bit types.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Put all nic related stuff of libxl form common files into a dedicated
source file.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Some device types require a configuration update after resume of
domain. Add a callback for this purpose.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Put all vtpm related stuff of libxl into a dedicated source file.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add another callback to the device type framework in order to aid
decision whether a pv domain needs a device model.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Instead of using a macro generating the code to merge xenstore and
json configuration data, use the generic device type support for
this purpose.
This requires to add some accessor functions to the framework and
a structure for disks (as disks are added separately they didn't need
such a structure up to now).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In order to be able to have all functions related to a device type in
a single source file move the macros used to generate device type
specific functions to libxl_internal.h. Rename the macros as they are
no longer local to a source file. While at it hide device remove and
device destroy in one macro as those are always used in pairs. Move
usage of the macros to the appropriate source files.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Instead of duplicate coding for each device type (vtpms, usbctrls, ...)
especially on domain creation introduce a framework for that purpose.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These functions are not supposed to modify the passed in parameters.
Reflect that in function declarations.
Mark the change in APIs in libxl.h
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The libxl__stub_dm_spawn_state field in libxl__domain_create_state was
named dmss. That was inconsistent with how things were named (usually
acronym) and there was already libxl__dm_spawn_state named dmss in other
places.
Change dmss to sdss and fix up all sites that reference this field. No
functional change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Use the /libxl path for interpreting disk eject watch events: do not
read the backend path out of the frontend. Instead, use the version
in /libxl. That avoids us relying on the guest-modifiable
$frontend/backend pointer.
To implement this we store the path
/libxl/$guest/device/vbd/$devid/backend
in the evgen structure.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Multiple places in libxl need to figure out the backend domid of a
device. This can be discovered easily by looking at the backend path,
which always starts /local/domain/$backend_domid/.
There are no call sites yet.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
This gives us a record of all the backends we have set up for a
domain, which is separate from the frontends in
/local/domain/$DOMID/device.
In particular:
1. A guest has write permission for the frontend path:
/local/domain/$DOMID/device/$KIND/$DEVID
which means that the guest can completely delete the frontend.
(They can't recreate it because they don't have write permission
on the containing directory.)
2. A guest has write permission for the backend path recorded in the
frontend, ie, it can write to
/local/domain/$DOMID/device/$KIND/$DEVID/backend
which means that the guest can break the association between
frontend and backend.
So we can't rely on iterating over the frontends to find all the
backends, or examining a frontend to discover how a device is
configured.
So, have libxl__device_generic_add record the frontend and backend
paths in /libxl/$DOMID/device, and have libxl__device_destroy remove
them again.
Create the containing directory /libxl/GUEST/device in
libxl__domain_make. The already existing xs_rm in devices_destroy_cb
will take care of removing it.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
---
v2: Correct actual path computation (!)
v3: Correct actual path computation - really this time (!)
Commit 56fb5fd623 ("libxl: adjust PoD target by memory fudge, too")
introduced target_memkb adjustment for HVM PoD domains on create,
wherein the value it wrote to target is always 1MiB lower than the
actual target_memkb. Unfortunately, on reboot, it is this value which
is read *unmodified* to feed into the next domain creation; from which
1MiB is subtracted *again*. This means that any guest which reboots
with memory < maxmem will have its memory target decreased by 1MiB on
every boot.
This patch makes it so that when reading target on reboot, we adjust the
value we read *up* by 1MiB, so that the domain will be build with the
appropriate amount of memory and the target will remain the same after
reboot.
This is still not quite a complete fix, as the 1MiB offset is only
subtracted when creating or rebooting; it is not subtracted when 'xl
set-memory' is called. But it will prevent any situations where memory
is continually increased or decreased. A better fix will have to wait
until after the release.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
We don't support plugging in emulated nic to a HVM guest.
The "update_json" flag is only set when doing hotplug, so use that as an
indicator in libxl__device_nic_add. The new hotplug flag to _setdefault
function should be false in all other locations.
This then requires saving nic type in JSON file, because we don't want
the receiving end to recalculate the nic type.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Since it's unsafe to code it as a function because it would end up passing a
non literal string to a printf like function.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
This is needed because the cd-{insert/eject} functions are not prepared to
deal with blkback, which would be used by default if no backend was
specified.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
So libxl doesn't have to pass the build info around just to get the device
model used by the guest. This allows to simplify
libxl__device_nic_setdefault.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The current code in libxl assumed that vdev is equal to local device, but
this is only true for Linux systems. In other OSes the local device can use
a nomenclature completely different from the virtual device one.
Move the current libxl__devid_to_localdev Linux implementation out of the
OS-specific file and rename it to libxl__devid_to_vdev, and then make sure
local_device_attach_cb return the local device in the diskpath field.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
We need to separate COLO code from common code as clean as possible.
With this patch, all COLO structures are now in libxl_colo.h.
It does the following:
1. Move two typedefs for libxl__domain_create_state{,cb} back to
libxl_internal.h.
2. Move libxl__colo_save_state to libxl_colo.h.
3. Include libxl_internal.h in libxl_colo.h.
4. Move a bunch of colo typedefs to the top of libxl_internal.h.
5. Move the inclusion of libxl_colo.h to the right place in
libxl_internal.h.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add a service routine checking whether a device model must be started
after adding a device to a domain.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add an internal service function to check for a running device model.
This can be used later when adding devices to a domain requiring a
device model for either printing an error message or starting the
device model in case it is not already running.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a new pvusb backend type "qusb" which is provided by qemu. It can
be selected either by specifying the type directly in the configuration
or it is selected automatically by libxl in case there is no "usbback"
driver loaded.
The "qusb" backend is a full replacement for the kernel based backend
"vusb". The interface to the frontend is the very same including all
Xenstore paths, while the backend paths in Xenstore differ ("qusb"
instead ov "vusb").
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a function to query whether the device model is supporting a
specific backend type. The device model is writing the supported
backend types to Xenstore on startup. The new query function checks
for the appropriate entry to be present.
As not all versions of qemu are capable to indicate support of
specific backends the query function is to be called with an indicator
whether the default return value should be "supported" (in case qemu
doesn't know set any support information) or "not supported".
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxl__need_xenpv_qemu() is called with configuration data for console,
vfbs, disks and channels today in order to evaluate the need for
starting a device model for a pv domain.
The console data is local to the caller and setup in a way to never
require a device model. All other data is taken from the domain config
structure.
In order to support other device backends via qemu change the interface
of libxl__need_xenpv_qemu() to take the domain config structure as
input instead of the single device arrays.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
pygrub and qemuu need to be able to access a VM's disks locally in
order to be able to pull out the kernel and provide emulated disk
access, respectively. This can be done either by accessing the local
disk directly, or by plugging the target disk into dom0 to allow
access.
Unfortunately, while the plugging machinery works for pygrub, it does
not yet work for qemuu; this means that at the moment, disks with
hotplug scripts or disks with non-dom0 backends cannot be provided as
emulated devices to HVM domains.
Fortunately, disks using hotplug scripts created in dom0 do create a
block device as part of set-up, which can be accessed locally; and if
they use block-common.sh:write_dev, this path will be written to
physical-device-path.
Modify libxl__device_disk_setdefault() to be able to fish this path
out of xenstore and pass it to the caller.
Unfortunately, at the time pygrub runs, the devices have not yet been
set up. Rather than try to stash the domid somewhere to pass, we just
pass INVALID_DOMID.
This allows qemuu to emulate block devices created with custom hotplug
scripts.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: George Dunlap <george.dunlap@citrix.com>
qemu can also access disks which will be provided with a qdisk backend
directly; add a flag to libxl__device_disk_find_local_path to indicate
whether to check for qdisk direct access.
Call libxl__device_disk_find_local_path() for most paths. If we can't
find a local path, print an error and skip the disk, rather than using
a bogus path.
Now if there is no local access to the disk (i.e., because the disk
has a non-local backend, or relies on a custom hotplug script), libxl
will now print a warning and not provide the emulated disk, rather
than providing bogus parameters to qemu which cause it to error out.
(Such disks will still be available via the PV backend.)
I left the libxl__blktap_devpath in the qemuu-specific code rather
than sharing it with the pyrgub code because:
1) When the pygrub path runs the guest disks have not yet been set up
2) libxl__blktap_devpath() will give you the existing devpath if it
already exists, but will set one up for you if you don't. So on the
pygrub path, this would end up setting up a new tap device.
3) There is no tap-specific teardown code on the pygrub path, and I
don't want to add any (particularly since I'm hoping to remove tapdisk
altogether soon).
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: George Dunlap <george.dunlap@citrix.com>
Zhang Chen
Roger Pau Monne
Juergen Gross
Cedric Bosdonnat
Shannon Zhao
Wei Liu
Anthony PERARD
Ian Jackson
Vitaly Kuznetsov
George Dunlap
Wen Congyang