The variable isn't used past the loop, and its value also isn't
meaningful across iterations. Reduce its scope to make this more
obvious.
Coverity ID: 1532310
Fixes: ae763e4224 ("tools/misc: introduce xen-mfndump")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Commit 438c5ffa44 ("rpmball: Adjust to
new rpm, do not require --force") attempted to handle stricter
directory permissions in newer distributions.
This introduced a few issues:
- /boot used to be a constant prior commit
6475d70005 ("use BOOT_DIR as xen.gz
install location"), since this commit the location has to be
referenced via ${BOOT_DIR}
- it assumed the prefix and the various configurable paths match the
glob pattern /*/*/*
Adjust the code to build a filelist on demand and filter directories
from an installed filesystem.rpm. This works on a SUSE system, and
will likely work on a RedHat based system as well.
Take the opportunity to replace the usage of $RPM_BUILD_ROOT with
%buildroot, and use pushd/popd pairs.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The iommu local variable does not point to to a valid amd_iommu element
after the call to for_each_amd_iommu(). Instead check whether any IOMMU
on the system doesn't support Invalidate All in order to perform the
per-domain and per-device flushes.
Fixes: 9c46139de8 ('amd iommu: Support INVALIDATE_IOMMU_ALL command.')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Fields that generic_identify() sets unconditionally don't need pre-
setting. (In fact the compiler removes some of those assignments anyway,
at least in release builds.)
With the setting of ->cpuid_level to -1 gone, also drop the respective
BUG_ON() from default_init().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Guard it with CONFIG_LIVEPATCH. Note alternatives are applied at boot
using _apply_alternatives().
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The _setdefault() function for virtio devices is getting called after
libxl__prepare_dtb(), which is late as libxl__prepare_dtb() expects the
defaults to be already set by this time.
Call libxl__virtio_devtype.set_default() from
libxl__domain_config_setdefault(), in a similar way as other devices
like disk, etc.
Suggested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Only the VirtIO backend will watch xenstore to find out when a new
instance needs to be created for a guest, and read the parameters from
there. VirtIO frontend are only virtio, so they will not do anything
with the xenstore nodes. They can be removed.
While at it, also add a comment to the libxl_virtio.c file.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Some version of GCC will complain because the prototype and the
declaration of domain_max_chk() don't match:
xenstored_domain.c:1503:6: error: conflicting types for 'domain_max_chk' due to enum/integer mismatch; have '_Bool(const struct connection *, enum accitem, unsigned int)' [-Werror=enum-int-mismatch]
1503 | bool domain_max_chk(const struct connection *conn, enum accitem what,
| ^~~~~~~~~~~~~~
In file included from xenstored_domain.c:31:
xenstored_domain.h:146:6: note: previous declaration of 'domain_max_chk' with type '_Bool(const struct connection *, unsigned int, unsigned int)'
146 | bool domain_max_chk(const struct connection *conn, unsigned int what,
| ^~~~~~~~~~~~~~
Update the prototype to match the declaration.
This was spotted by Gitlab CI with the job opensuse-tumbleweed-gcc.
Fixes: 685048441e ("tools/xenstore: switch quota management to be table based")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
There is no real need for including tools/xenstore/utils.h from
libxenstore, as only streq() and ARRAY_SIZE() are obtained via that
header.
streq() is just !strcmp(), and ARRAY_SIZE() is brought in via
xen-tools/common-macros.h.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Replace the usage of the xenstore private list.h header with the
common xen_list.h one.
Use the XEN_TAILQ type list, as it allows to directly swap the
related macros/functions without having to change the logic.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Rename the guest_cpuinfo structure to domain_cpuinfo as it is not only
used for guests but also for dom0 so domain is a more suitable name.
While there also rename the create_guest_cpuinfo function to
create_domain_cpuinfo to be coherent and fix comments accordingly.
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
The original change doesn't compile on ARM:
xenctrl_stubs.c: In function 'stub_xc_physinfo':
xenctrl_stubs.c:821:16: error: unused variable 'arch_cap_flags_tag' [-Werror=unused-variable]
821 | int r, arch_cap_flags_tag;
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
but it was buggy too.
First, it tried storing an int in a pointer slot, causing heap corruption.
Next, it is not legitimate to exclude arm32 in the toolstack as it explicitly
can operate an arm64 toolstack and build arm64 domains. That in turn means
that you can't stash a C uint32_t in an OCaml int.
Rewrite the arch_capabilities handling from scratch. Break it out into a
separate function, and make the construction of arch_physinfo_cap_flags common
to prevent other indirection bugs.
Reintroduce arm_physinfo_caps with the fields broken out.
Fixes: 56a7aaa16b ("tools: add physinfo arch_capabilities handling for Arm")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
This gets more coverage of optional parts of the build, and makes it easier to
trial Ocaml related changes in the smoke tests.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
In order to prepare the replacement of TDB with direct accessible nodes
in memory, remove the support for a file backed data base.
This allows to remove xs_tdb_dump, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
The TODO file is not really helpful any longer. It contains only
entries which no longer apply or it is unknown what they are meant
for ("Dynamic/supply nodes", "Remove assumption that rename doesn't
fail").
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
There is no need to keep struct wrl_timestampt, as it serves the same
purpose as the more simple time base provided by get_now().
Move some more stuff from xenstored_domain.h into xenstored_domain.c
as it is being used nowhere else.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Some wrl_*() functions are only used in xenstored_domain.c, so make
them static. In order to avoid the need of forward declarations, move
the whole function block to the start of the file.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Today hashtable_insert() returns 0 in case of an error. Change that to
let it return an errno value in the error case and 0 in case of success.
In order to avoid any missed return value checks or related future
backport errors, rename hashtable_insert() to hashtable_add().
Even if not used today, do the same switch for the return value of
hashtable_expand().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The minsize parameter of create_hashtable() doesn't have any real use
case for Xenstore, so drop it.
For better talloc_report_full() diagnostic output add a name parameter
to create_hashtable().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Do the following cleanups:
- hashtable_count() isn't used at all, so remove it
- replace prime_table_length and max_load_factor with macros
- make hash() static
- add a loadlimit() helper function
- remove the /***/ lines between functions
- do some style corrections
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
MASK_EXTR() and MASK_INSR() are a matching pair. Keep them together.
Drop the pair from x86-emulate.h which includes common-macros.h.
Fixes: 56a7aaa16b ("tools: add physinfo arch_capabilities handling for Arm")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Some of the current users of hvm_cr4_guest_valid_bits() don't print
the valid mask in case of error, and thus the resulting error messages
are not as helpful as they could be.
Amend callers to always print the value of hvm_cr4_guest_valid_bits()
together with the rejected bits in the checked value. Also take the
opportunity and adjust all the users to use the same print formatter.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The Install step is failing with:
Package python-dev is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
E: Package 'python-dev' has no installation candidate
is only available from another source
However the following packages replace it:
python2-dev python2 python-dev-is-python3
which is a side effect of ubuntu-latest having changed from 20.04 to 22.04.
Drop python-dev as python3-dev is already present, and used a fixed runs-on to
avoid such problems in the future.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
A recent change to the documentation for the xl.cfg introduced a build
error, fix the issue.
Fixes: b46e8207d0 ("xen/tools: add sve parameter in XL configuration")
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Tested-by: Michal Orzel <michal.orzel@amd.com>
Instead of having individual quota variables switch to a table based
approach like the generic accounting. Include all the related data in
the same table and add accessor functions.
This enables to use the command line --quota parameter for setting all
possible quota values, keeping the previous parameters for
compatibility.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Let get_optval_int() return an unsigned value and rename it
accordingly.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The maxrequests, node size, number of node permissions, and path length
quota are a little bit special, as they are either active in
transactions only (maxrequests), or they are just per item instead of
count values. Nevertheless being able to know the maximum number of
those quota related values per domain would be beneficial, so add them
to the generic accounting.
The per domain value will never show current numbers other than zero,
but the maximum number seen can be gathered the same way as the number
of nodes during a transaction.
To be able to use the const qualifier for a new function switch
domain_is_unprivileged() to take a const pointer, too.
For printing the quota/max values, adapt the print format string to
the longest quota name (now 17 characters long).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Add saving the maximum values of the different accounting data seen
per domain and (for unprivileged domains) globally, and print those
values via the xenstore-control quota command. Add a sub-command for
resetting the global maximum values seen.
This should help for a decision how to set the related quotas.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
As transaction accounting is active for unprivileged domains only, it
can easily be added to the generic per-domain accounting.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Add a new trace switch "tdb" and the related trace calls.
The "tdb" switch is off per default.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Add a new trace switch "acc" and the related trace calls.
The "acc" switch is off per default.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Add the accounting of per-domain usage of Xenstore memory, watches, and
outstanding requests to the array based mechanism.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
In order to enable switching memory accounting to the generic array
based accounting, add the current connection to the parameters of
domain_memory_add().
This requires to add the connection to some other functions, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Add the node accounting to the accounting information buffering in
order to avoid having to undo it in case of failure.
This requires to call domain_nbentry_dec() before any changes to the
data base, as it can return an error now.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Instead of modifying accounting data and undo those modifications in
case of an error during further processing, add a framework for
collecting the needed changes and commit them only when the whole
operation has succeeded.
This scheme can reuse large parts of the per transaction accounting.
The changed_domain handling can be reused, but the array size of the
accounting data should be possible to be different for both use cases.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Introduce the scheme of an accounting data array for per-domain
accounting data and use it initially for the number of nodes owned by
a domain.
Make the accounting data type to be unsigned int, as no data is allowed
to be negative at any time.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
In order to prepare keeping accounting data in an array instead of
using independent fields, switch the struct changed_domain accounting
data to that scheme, for now only using an array with one element.
In order to be able to extend this scheme add the needed indexing enum
to xenstored_domain.h.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The accounting for the number of nodes of a domain in an active
transaction is not working correctly, as it is checking the node quota
only against the number of nodes outside the transaction.
This can result in the transaction finally failing, as node quota is
checked at the end of the transaction again.
On the other hand even in a transaction deleting many nodes, new nodes
might not be creatable, in case the node quota was already reached at
the start of the transaction.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Arm now can use the "dom0=" Xen command line option and the support
for guests running SVE instructions is added, put entries in the
changelog.
Mention the "Tech Preview" status and add an entry in SUPPORT.md
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Henry Wang <Henry.Wang@arm.com> # CHANGELOG
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
On Arm, the SVE vector length is encoded in arch_capabilities field
of struct xen_sysctl_physinfo, make use of this field in the tools
when building for arm.
Create header arm-arch-capabilities.h to handle the arch_capabilities
field of physinfo for Arm.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
When the arm platform supports SVE, advertise the feature in the
field arch_capabilities in struct xen_sysctl_physinfo by encoding
the SVE vector length in it.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add a command line parameter to allow Dom0 the use of SVE resources,
the command line parameter sve=<integer>, sub argument of dom0=,
controls the feature on this domain and sets the maximum SVE vector
length for Dom0.
Add a new function, parse_signed_integer(), to parse an integer
command line argument.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com> # !arm
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Currently x86 defines a Xen command line argument dom0=<list> where
there can be specified dom0 controlling sub-options, to use it also
on Arm, move the code that loops through the list of arguments from
x86 to the common code and from there, call architecture specific
functions to handle the comma separated sub-options.
No functional changes are intended.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Save/restore context switch for SVE, allocate memory to contain
the Z0-31 registers whose length is maximum 2048 bits each and
FFR who can be maximum 256 bits, the allocated memory depends on
how many bits is the vector length for the domain and how many bits
are supported by the platform.
Save P0-15 whose length is maximum 256 bits each, in this case the
memory used is from the fpregs field in struct vfp_state,
because V0-31 are part of Z0-31 and this space would have been
unused for SVE domain otherwise.
Create zcr_el{1,2} fields in arch_vcpu, initialise zcr_el2 on vcpu
creation given the requested vector length and restore it on
context switch, save/restore ZCR_EL1 value as well.
List import macros from Linux in README.LinuxPrimitives.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Jan Beulich