This patch addresses the problem of xenbaked/xenmon not dealing with
large domain ID's. Xen Domain ID's increase monotonically as domains
are created; The ID's are not (often) recycled. Xenbaked was using the
domain
ID's as indices to arrays of data, and this scheme blows up as soon as
a domain ID exceeds the array size. Code has been changed in xenbaked
and xenmon to isolate domain id's from array indices, so everything is
indirect. Users should not notice any difference in behavior.
From: Rob Gardner <rob.gardner@hp.com>
Signed-off-by: Keir Fraser <keir@xensource.com>
Currently, passive domain samples are being assigned to the wrong
kernel functions. This patch fixes this problem. In addition the patch changes the
encoding of domain switch ESCAPE codes (marks used to separate samples
in oprofile buffers associated with different domains). Instead of
using 2 codes, one for START and one for END of passive domain
samples, a single escape CODE value is used to indicate a domain switch (no
need for a STOP followed by a START). Finally there some other minor style
fixes.
Signed-off-by: Jose Renato Santos <jsantos@hpl.hp.com>
even if the user specifies maxmem in config. This patch uses maxmem
value to set maxmem instead of memory.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
works provided that the hotplug scripts deliver the "suspend" before
the "resume," but this is not always true.
Signed-off-by: Vinnie Scarlata <vincent.r.scarlata@intel.com>
Here is the original changelog:
[NET] gso: Fix up GSO packets with broken checksums
Certain subsystems in the stack (e.g., netfilter) can break the
partial
checksum on GSO packets. Until they're fixed, this patch allows
this to
work by recomputing the partial checksums through the GSO
mechanism.
Once they've all been converted to update the partial checksum
instead of
clearing it, this workaround can be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It must be protected by tty_sem semaphore like con_close() in
drivers/char/vt.c. and prevent re-opening this tty.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Keir Fraser <keir@xensource.com>
A check_uuid() in this patch checks on uuid of the
VM configuration definition. If specified uuid is
already used with the others VM, the xm create command
does not create the VM. The xm create command error occurs.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
- the name of the config file was computed incorrectly because of the
linux version number 4th digit being present in both LINUX_VER and
EXTRAVERSION extracted from the linux Makefile.
- DESTDIR was not set for the prep and config targets.
Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com>
The number "31" means the idle domain ID.
In detail:
- display the idle domain ID with "Idle" instead of "31"
- write to the file "log-idle.log" instead of "log-dom31.log".
Signed-off-by: KUWAMURA Shin'ya <kuwa@jp.fujitsu.com>
are using 2M PSE pages. Now we can do kernel build on:
1) RHEL4 IA32 SMP guest on PAE host.
2) RHEL4 IA32 SMP guest on IA32e host.
3) IA32e SMP guest on IA32e host.
Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com>
Signed-off-by: Xin Li <xin.b.li@intel.com>
config file, with this change, RHEL4 IA32 SMP guest can boot.
But because we don't support 4Mbytes PSE pages, so x86_32 HVM guest
can NOT use PSE feature. However user may have "pae=1" in config file,
which causes PSE feature seen by x86_32 HVM guest, and it will then use
4Mbytes PSE pages. In this case, we will have to crash x86_32 HVM.
So when running x86_32 HVM guest, user need pay attention not to have
"pae=1" in config file.
Signed-off-by: Xin Li <xin.b.li@intel.com>
Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com>
When we reconnect to the backend we need to first zero all negotiated
bits as the functions xen_set_sg and xen_set_tso do not (and are not
supposed to) zero bits when they fail to set them.
This patch also permanently enables the NETIF_F_GSO_ROBUST bit as we
never parse any GSO fields ourselves (even if we did the backend could
not trust us so it's wasted effort).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the as-yet unused GSO features which will contain
protocol-independent bits such as the ECN marker.
It also makes the backend check gso_size to ensure that it is non-zero.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The generalised extra request info patch introduced a bug with the use
of netbk_tx_err since it advanced the req_cons pointer by one. This
patch fixes thing by delaying the increment in netbk_tx_err.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Don't delete non-existent %.tar.bz2 in buildconfigs/Rules.mk's %-mrproper
* Add a mrpropper target to buildconfigs/mk.linux-2.6-xen, and
have this delete the local tarball
- This should also delete the local patch, if there is one, but I am not
sure how to do this with the current incarntation of the code, and I
will post a subsequent patch which makes this easier and effects this
chang. As there currently is no local patch this is not a big deal at
this moment. (Horms)
* Stop kclean from erroring out if the kernel directory doesn't exist
* Remove patches/*/.makedep in top level Makefile rather than in
buildconfigs/Rules.mk, as calling rules in the latter causes
patches/*/.make to be created (Magnus)
Signed-Off-By: Magnus Damm <magnus@valinux.co.jp>
Signed-Off-By: Horms <horms@verge.net.au>
Attached patch makes it always create valid devices on tty1-tty63, but
all but the one specified by xencons are dummy devices.
From: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Keir Fraser <keir@xensource.com>
- use 64-bit integral types for addresses in struct domain_start_info
- use stroull() to parse 64-bit values
- remove redundant _p(a) definition and add a comment
- printf format changes for the new types
Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
The new method for printing unconnected device status is arguably
cleaner and also does not screw up reference counts (previous code
called bus_find_device() with no put_device() on the result.
Signed-off-by: Keir Fraser <keir@xensource.com>
New changeset merged upstream:
[TCP]: Reset gso_segs if packet is dodgy
I wasn't paranoid enough in verifying GSO information. A bogus gso_segs
could upset drivers as much as a bogus header would. Let's reset it in
the per-protocol gso_segment functions.
I didn't verify gso_size because that can be verified by the source of
the dodgy packets.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
