Move xen-init-dom0 from tools/libxl to tools/helpers, as it is just a
helper program.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Adjust the coding style of init-xenstore-domain.c to the general Xen
coding style.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The program init-xenstore-domain to start a xenstore domain instead
of the xenstored daemon is built, but not installed. Change that.
Move the program to a new tools subdirectory "helpers" to be able to
use libxl in a later patch. Otherwise a dependency loop will be
created.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add a "never_stop" flag to dominfo as indicator for the toolstack that
this domain is to be kept running. For now it is being set for xenstore
domain, but there might be other domains in the future.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Support the xenstore domain flag for obtaining domain info.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Pmstat is currently not supported for ARM in Xen. Configure and build
pmstat for x86 architecture only.
Signed-off-by: Parth Dixit <parth.dixit@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The acpi_table_parse() function has a callback that
passes a pointer to a table_header. Add a new function
which takes this pointer and parses its entries. This
eliminates the need to re-traverse all the tables for
each call. e.g. as in acpi_table_parse_madt() which is
normally called after acpi_table_parse().
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[Linux commit f08bb472bff3c0397fb7d6f47bc5cec41dad76e3]
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Allow consumers of the acpi_table_parse()/acpi_table_parse_entries() API
to gracefully handle the acpi_disabled=1 case via return value
rather than checking the global flag themselves.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
[Linux commit e5b8fc6ac158f65598f58dba2c0d52ba3b412f52]
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Add an additional environment variable, defaulting to disabled,
that enables the CONFIG_EXPERT configuration option. The purpose
of the CONFIG_EXPERT configuration option is to make non-standard
Kconfig options visible during the configuration process. The
CONFIG_EXPERT option is not, itself, visible during the Kconfig
configuration process, so typical users will never see it nor
any of the non-standard configuration options.
Signed-off-by: Jonathan Creekmore <jonathan.creekmore@gmail.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The BSP will be marked as initialised after hvm_load_cpu_ctxt has loaded the
initial state, which is called from the toolstack during domain creation.
Previous to my HVMlite series HVM guests were started without setting any
explicit CPU state (in fact we placed that horrible jmp at 0x0, because the
IP was by default set to 0x0). This is no longer true, and now HVM guests
require that a proper CPU context is loaded before starting. This change
helps enforce this policy.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
With xen/Makefile including include/config/auto.conf.cmd, environment
variables checked in the latter must be available at the time of
inclusion of that file, and hence must be populated in xen/Makefile
rather than by passing to or inside xen/tools/kconfig/Makefile.kconfig.
Otherwise incremental re-builds will always be full re-builds, which is
not only annoying but actively problematic when building as non-root
and only running "install-xen" as root.
Also take the opportunity and remove stray $(Q) uses.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
My recent patch series 'docs: Document xenstore paths' included 3
patches documenting new xenstore paths to allow PV drivers/agents in
guests to advertise version information, significant features and
attributes (such as assigned IP addresses).
This patch adds the necessary code to libxl to create these paths in
xenstore when a domain is created.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add r1p12 to the list of supported Cadence UARTs. Xen only
uses the subset of features available in r1p8, so we don't
need to differentiate between r1p8 and r1p12 yet.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxl_list_vm() is calling xc_domain_getinfolist() today with a limit
of 1024 domains. To avoid open coding a loop around
xc_domain_getinfolist() to avoid the 1024 domain limit just use
libxl_list_domain() instead.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
xl list is currently limited to 1024 domains. Remove the limit.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Add stubdom/libs-* to gitignore, then sort stubdom/* entries
alphabetically.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If sysconf(_SC_GETPW_R_SIZE_MAX) fails for any reason just use an initial
buffer size of 2048. This is not a critical failure, and the code that
makes use of this buffer is able to expand it later if required.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
commit 5d3dc86715
"tools: Refactor "xentoollog" into its own library"
with older python versions (2.6.4) will fail to
the build if attempted to be done twice (which
happens due to pygrub dependencies).
make -C python DESTDIR=/tmp
make -C python DESTDIR=/tmp
The second one will fail with:
error: -Wl, -rpath-link=../../tools/libs/toollog: No such file or directory
even though the directory is there (with the libs).
Andrew pointed out that the linker additions should be in
the "extra_link_args" rather than "depends".
And true enough - with that modification it builds.
CC: Ian Campbell <ian.campbell@citrix.com>
CC: Ian Jackson <ian.jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Suggested-by: Andrew Cooper <andrew.cooper3@citirx.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- typo in commit message ]
This reverts commit d64dbbcc7c:
Xen always set the FPU as initialized when loading a HVM context, so libxc
has to provide a valid FPU context when setting the CPU registers.
This was a stop-gap measure in order to unblock OSSTest Windows 7 failures
while a proper fix for the HVM CPU save/restore is being worked on.
This can now be reverted because a proper fix is in place and we can signal
in the save record whether the FPU is initialized or not.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This simplifies a number of pointless conditionals: Bits 0 and 1 of
xcomp_bv don't matter anyway, and as long as none of bits 2..62 are
set, setting bit 63 is pointless too unless XSAVES is in use.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a new flags field and use bit 0 to signal if the FPU has been
initialised or not. Previously Xen always wrongly assumed the FPU was
initialised on restore.
While modifying the FPU restore part of hvm_load_cpu_ctxt remove the
memcpy branching, since v->arch.fpu_ctxt will always point to the right
area for hosts with XSAVE or without it.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Use CONFIG_NR_CPUS from Kconfig as NR_CPUS instead of the previous
MAX_PHYS_CPUS variable from make. Remove the creation of MAX_PHYS_CPUS
as well.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
I've got repeatedly annoyed by the bad naming: Make them slightly
better recognizable (and less likely to get mixed up), except in cases
where they can be eliminated altogether.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
... in anticipation of this possibly going to get used by guests for
basic thinks like memset() or clearing or pages.
Since the emulation doesn't use clzero itself, checking the guest's
CPUID for the feature to be exposed is (intentionally) being avoided
here. All that's required is sensible guest side data for the clflush
line size.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Converts the existing XSM_ENABLE flag from Config.mk to CONFIG_XSM
within Kconfig. This also re-adds the dependency of CONFIG_FLASK on
CONFIG_XSM.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Converts the Config.mk option of FLASK_ENABLE into a Kconfig option for
the hypervisor called CONFIG_FLASK. This commit knowingly breaks the
dependent relationship on XSM_ENABLE which is addressed when XSM_ENABLE
is converted to Kconfig.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Since we now support changing Xen options with Kconfig, we should save
the configuration that was used to build up Xen. This will save it in
/usr/lib/debug alongside xen-syms and call it xen-$(FULLVERSION).config
Suggested-by: Ian Campbell <ian.campbell@citrix.com>
Requested-by: Jan Beulich <jbeulich@suse.com> # the directory
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
This introduces a way to have a restricted VPMU, by specifying one of two
predefined groups of PMCs to make available. For secure environments, this
allows the VPMU to be used without needing to enable all PMCs.
Signed-off-by: Brendan Gregg <bgregg@netflix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
In order to be able to have full support of a xenstore domain in Xen
add a "Xenstore-domain" flag to the hypervisor. This flag must be
specified at domain creation time and is returned by
XEN_DOMCTL_getdomaininfo.
It will allow the domain to retrieve domain information by issuing the
XEN_DOMCTL_getdomaininfo itself in order to be able to check for
domains having been destroyed. At the same time this flag will inhibit
the domain to be migrated, as this wouldn't be a very wise thing to do.
In case of a later support of a rebootable Dom0 this flag will allow to
recognize a xenstore domain already being present to connect to.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Andrew Cooper <andrew.cooper3@citirx.com>
The "goto err;" for malloc() error handling would cause the cleanup code
to use 'ptes' before it had been initialised, and causing a build
failure because of -Werror=maybe-uninitialised.
Use "goto err;" consistently for all error handling.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When the TSC mode of a HVM container is TSC_MODE_DEFAULT or
TSC_MODE_PVRDTSCP and no TSC emulation is used, the existing
tsc_get_info() uses the host TSC frequency (cpu_khz) as the guest TSC
frequency. However, tsc_set_info() may set the guest TSC frequency to a
value different than the host. In order to keep consistent to
tsc_set_info(), this patch makes tsc_get_info() use the value set by
tsc_set_info() as the guest TSC frequency.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
When TSC_MODE_PVRDTSCP is used for a HVM container and TSC scaling is
available, use the non-zero value of argument gtsc_khz of tsc_set_info()
as the guest TSC frequency rather than using the host TSC
frequency. Otherwise, TSC scaling will not be able get the correct ratio
between the host and guest TSC frequencies.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
This is broken from "xen: convert XSM_ENABLE to Kconfig"
6d5293032f5fc1c65f7a73548afaa3caa8e0105a. This hunk was dropped when I
made my v2 for some reason.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Juergen Gross
Parth Dixit
Ashwin Chaugule
Len Brown
Jonathan Creekmore
Roger Pau Monné
Andrew Cooper
Jan Beulich
Doug Goldstein
Ian Campbell
Paul Durrant
Edgar E. Iglesias
Wei Liu
Konrad Rzeszutek Wilk
Tamas K Lengyel
Boris Ostrovsky
Brendan Gregg
Haozhong Zhang
Bob Moore
Hanjun Guo
Tomasz Nowicki