Most of the users of page_to_mfn and mfn_to_page are either overriding
the macros to make them work with mfn_t or use mfn_x/_mfn because the
rest of the function use mfn_t.
So make page_to_mfn and mfn_to_page return mfn_t by default. The __*
version are now dropped as this patch will convert all the remaining
non-typesafe callers.
Only reasonable clean-ups are done in this patch. The rest will use
_mfn/mfn_x for the time being.
Lastly, domain_page_to_mfn is also converted to use mfn_t given that
most of the callers are now switched to _mfn(domain_page_to_mfn(...)).
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Other than MFN 0 -> INVALID_MFN, no functional change intended.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
At the same time replace MFN 0 by INVALID_MFN or drop the initializer
when it is not necessary. This will make clearer that the MFN
initialized is not valid.
Other than MFN 0 -> INVALID_MFN, no functional change intended.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The current prototype is slightly confusing because it takes a guest
physical address and a machine physical frame (not address!). Switching to
MFN will improve safety and reduce the chance to mistakenly invert the
2 parameters.
Signed-off-by: Julien grall <julien.grall@arm.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
A new helper __copy_mfn_to_guest is introduced to easily to copy a MFN to
the guest memory.
Not functional change intended
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The current prototype is slightly confusing because it takes a virtual
address and a physical frame (not address!). Switching to MFN will improve
safety and reduce the chance to mistakenly invert the 2 parameters.
Also, take the opportunity to switch (a - b) >> PAGE_SHIFT to
PFN_DOWN(a - b) in the code modified.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The function populate_pt_range is used to populate in advance the
page-table but it will not do the actual mapping. So passing the MFN in
parameter is pointless. Note that the only caller pass 0...
At the same time replace 0 by INVALID_MFNs. While this does not matter
as the entry will marked as not valid and populated, INVALID_MFN
helps the reader to know the MFN is invalid.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
--
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tim Deegan <tim@xen.org>
Changes in v6:
- Add George's and Wei's reviewed-by
- Add Andrew's acked-by
Changes in v5:
- Update the commit message to explain why 0 -> INVALID_MFN.
Changes in v4:
- Patch added.
Arm does not have an M2P and very unlikely to get one in the future,
therefore don't keep defines that are not necessary in the common code.
At the same time move the remaining M2P define just above
set_gpfn_from_mfn to keep all the dummy helpers for M2P together.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
When xenstore was ported to the new safe-string interface, it mostly
happened by making copyies of string into bytes and back. The ideal
fix would be to rewrite all of the relevant interfaces to be uniformly
using bytes, but in the meanwhile we can improve the code by using unsafe
conversion functions (see
https://caml.inria.fr/pub/docs/manual-ocaml/libref/Bytes.html#3_Unsafeconversionsforadvancedusers).
In most cases we own the bytes that we are converting to string, or we
immediately make copies that we then mutate, or we use them immutably
as payloads for writes. In all these cases it is safe to use the unsafe
functions and prevent a copy.
This patch updates the code to use the unsafe conversions where possible.
Signed-off-by: Marcello Seri <marcello.seri@citrix.com>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
c/s 74fd984ae "tools/libxl: Drop xc_domain_configuration_t from
libxl__domain_build_state" removed state->config completely, but the GIC
version is available in info. Use the up-to-date version.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 complains:
kdd.c:698:13: error: 'memcpy' offset [-204, -717] is out of the bounds [0, 216] of object 'ctrl' with type 'kdd_ctrl' {aka 'union <anonymous>'} [-Werror=array-bounds]
memcpy(buf, ((uint8_t *)&ctrl.c32) + offset, len);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kdd.c: In function 'kdd_select_callback':
kdd.c:642:14: note: 'ctrl' declared here
kdd_ctrl ctrl;
^~~~
But this is impossible - 'offset' is unsigned and correctly validated
few lines before.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 complains:
vhd-util-read.c: In function 'vhd_util_read':
vhd-util-read.c:50:24: error: '%lu' directive output may be truncated writing between 1 and 20 bytes into a region of size 15 [-Werror=format-truncation=]
snprintf(nbuf, nsize, "%" PRIu64, num);
^~~
vhd-util-read.c:50:25: note: format string is defined here
snprintf(nbuf, nsize, "%" PRIu64, num);
vhd-util-read.c:50:24: note: directive argument in the range [0, 18446744073709551614]
snprintf(nbuf, nsize, "%" PRIu64, num);
^~~
vhd-util-read.c:50:2: note: 'snprintf' output between 2 and 21 bytes into a destination of size 15
snprintf(nbuf, nsize, "%" PRIu64, num);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vhd-util-read.c:43:24: error: '%#lx' directive output may be truncated writing between 1 and 18 bytes into a region of size 15 [-Werror=format-truncation=]
snprintf(nbuf, nsize, "%#" PRIx64 , num);
^~~~
vhd-util-read.c:43:25: note: format string is defined here
snprintf(nbuf, nsize, "%#" PRIx64 , num);
vhd-util-read.c:43:24: note: directive argument in the range [0, 18446744073709551614]
snprintf(nbuf, nsize, "%#" PRIx64 , num);
^~~~
vhd-util-read.c:43:2: note: 'snprintf' output between 2 and 19 bytes into a destination of size 15
snprintf(nbuf, nsize, "%#" PRIx64 , num);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Make the buffer larger.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 complains:
tapdisk-vbd.c: In function 'tapdisk_vbd_resume_ring':
tapdisk-vbd.c:1671:53: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
snprintf(params.name, sizeof(params.name) - 1, "%s", message);
^
tapdisk-vbd.c:1671:3: note: 'snprintf' output between 1 and 256 bytes into a destination of size 255
snprintf(params.name, sizeof(params.name) - 1, "%s", message);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The "- 1" in buffer size should be actually applied to message, to leave
place for terminating '\0', not the other way around (truncate '\0' even
if it would fit).
In function 'tapdisk_control_open_image',
inlined from 'tapdisk_control_handle_request' at tapdisk-control.c:660:10:
tapdisk-control.c:465:2: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]
strncpy(params.name, vbd->name, BLKTAP2_MAX_MESSAGE_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'tapdisk_control_create_socket',
inlined from 'tapdisk_control_open' at tapdisk-control.c:836:9:
tapdisk-control.c:793:2: error: 'strncpy' specified bound 108 equals destination size [-Werror=stringop-truncation]
strncpy(saddr.sun_path, td_control.path, sizeof(saddr.sun_path));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
block-qcow.c: In function 'qcow_create':
block-qcow.c:1216:5: error: 'strncpy' specified bound 4096 equals destination size [-Werror=stringop-truncation]
strncpy(backing_filename, backing_file,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(backing_filename));
~~~~~~~~~~~~~~~~~~~~~~~~~
I those cases, reduce size of copied string and make sure final '\0' is
added.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 complains:
gx_main.c: In function 'prepare_stop_reply':
gx_main.c:385:9: error: 'strncpy' output truncated before terminating nul copying 6 bytes from a string of the same length [-Werror=stringop-truncation]
strncpy(buf, "watch:", 6);
^~~~~~~~~~~~~~~~~~~~~~~~~
Since terminating '\0' isn't needed here at all, switch to memcpy.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 complains:
xen-lowmemd.c: In function 'handle_low_mem':
xen-lowmemd.c:80:55: error: '%s' directive output may be truncated writing up to 511 bytes into a region of size 489 [-Werror=format-truncation=]
snprintf(error, BUFSZ,"Failed to write target %s to xenstore", data);
^~ ~~~~
xen-lowmemd.c:80:9: note: 'snprintf' output between 36 and 547 bytes into a destination of size 512
snprintf(error, BUFSZ,"Failed to write target %s to xenstore", data);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In practice it wouldn't happen, because 'data' contains string
representation of 64-bit unsigned number (20 characters at most).
But place a limit to mute gcc warning.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
gcc-8 warns about possible truncation of trailing '\0'.
Final character is overridden by '\0' anyway, so don't bother to copy
it.
This fixes compile failure:
xc_pm.c: In function 'xc_set_cpufreq_gov':
xc_pm.c:308:5: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
strncpy(scaling_governor, govname, CPUFREQ_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
When 0-indexing, maximum index is num_entries - 1. The python xc library had a
sign error where the minus was replaced by a plus, making tools that depended
on it to look for CPUs that did not exist.
Signed-off-by: Petre Eftime <epetre@amazon.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Similar functionality to libxl_domain_suspend(), but do not save domains
state to any file. Only suspend the domain and keep it in suspended
shutdown state (do not destroy it). Such domain can be later woken up
with libxl_domain_resume. The main reason for this functionality is to
suspend the host while some domains are running, potentially holding PCI
devices. This will give a chance to a driver in such a domain to
properly suspend the device.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Marcus of Wetware Labs <marcus@wetwa.re>
Acked-by: Wei Liu <wei.liu2@citrix.com>
No functional change intended.
While we are here, use PFN_DOWN() rather than open coding it.
Signed-off Julien Grall <julien.grall@arm.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In a follow-up patch, some callers will be switched to pass
INVALID_MFN instead of zero for non-present mappings. So skip
incrementing mfn if it is not a valid one.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This exposes less code pieces and at the same time reduces the range
covered from slightly above 3 pages to a little below 2 of them.
The code being moved is unchanged, except for the removal of trailing
blanks, insertion of blanks between operands, and a pointless q suffix
from "retq".
A few more small pieces could be moved, but it seems better to me to
leave them where they are to not make it overly hard to follow code
paths.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
At the same time also report the state of the two defined
ARCH_CAPABILITIES MSR bits. To avoid further complicating the
conditional around that printk(), drop it (it's a debug level one only
anyway).
Issue the main message without any XENLOG_*, and also drop XENLOG_INFO
from the respective BTI message, to make sure they're visible at default
log level also in release builds.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
This reduces code volume, and has a minor improvement on compiled size,
probably due to the removal of several temporary variables.
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-50 (-50)
function old new delta
vmx_vmexit_handler 6881 6878 -3
nvmx_n2_vmexit_handler 3473 3426 -47
Take the opportunity to make some style corrections, and add some
ASSERT_UNREACHABLE()s in appropriate places.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
This is a tools only hypercall so fine to change. Altering the name avoids
having confusing code such as config->config all over the hypervisor and
toolstack.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xc_config is only used by xc_domain_create(), but by calling
libxl__arch_domain_{prepare,save}_config() we clobber the real settings with
the default settings.
Move all data and calls relating to xc_domain_create() into the path which
calls it.
As far as I can tell, soft_reset has always been broken for ARM domains using
LIBXL_GIC_VERSION_DEFAULT, which elicits a hard error out of
libxl__arch_domain_save_config(), and only works on x86 because this function
is a no-op.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The data it stores is initialised and exclusively used within
libxl__domain_make(), with the important details written back elsewhere by
libxl__arch_domain_save_config(). Prepare xc_config on libxl__domain_make()'s
stack, and drop the parameter.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
With the new cpuid infrastructure there is a domain-wide struct cpuid
policy and there is no need to pass a separate struct vcpu * into
hvm_cr4_guest_valid_bits() anymore. Make the function accept struct
domain * instead and update callers.
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
For the default EPT view we have xc_set_mem_access_multi(), which
is able to set an array of pages to an array of access rights with
a single hypercall. However, this functionality was lacking for the
altp2m subsystem, which could only set page restrictions for one
page at a time. This patch addresses the gap.
HVMOP_altp2m_set_mem_access_multi has been added as a HVMOP (as opposed to a
DOMCTL) for consistency with its HVMOP_altp2m_set_mem_access counterpart (and
hence with the original altp2m design, where domains are allowed - with the
proper altp2m access rights - to alter these settings), in the absence of an
official position on the issue from the original altp2m designers.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
It is possible to call the error path with i pointing beyond the end
of the array.
There is another bug that if there is already a default ioreq server,
the code will actually sets the element to NULL, hence leaking memory.
Move setting NULL to where it is needed.
Coverity-ID: 1433777
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
By using a static inline stub in private.h for OS where this functionality
is not implemented, the various duplicate stubs in the OS-specific source
modules can be avoided.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
...to allow the calling domain to prevent translation of specified l1e
value.
Despite what the comment in public/xen.h might imply, specifying a
command value of MMU_NORMAL_PT_UPDATE will not simply update an l1e with
the specified value. Instead, mod_l1_entry() tests whether foreign_dom
has PG_translate set in its paging mode and, if it does, assumes that the
the pfn value in the l1e is a gfn rather than an mfn.
To allow PV tools domain to map mfn values from a previously issued
HYPERVISOR_memory_op:XENMEM_acquire_resource, there needs to be a way
to tell HYPERVISOR_mmu_update that the specific l1e value does not
require translation regardless of the paging mode of foreign_dom. This
patch therefore defines a new command value, MMU_PT_UPDATE_NO_TRANSLATE,
which has the same semantics as MMU_NORMAL_PT_UPDATE except that the
paging mode of foreign_dom is ignored and the l1e value is used verbatim.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
... XENMEM_resource_ioreq_server
This patch adds support for a new resource type that can be mapped using
the XENMEM_acquire_resource memory op.
If an emulator makes use of this resource type then, instead of mapping
gfns, the IOREQ server will allocate pages which are assigned to the
emulating domain. These pages will never be present in the P2M of the
guest at any point (and are not even shared with the guest) and so are not
vulnerable to any direct attack by the guest.
NOTE: Use of the new resource type is not compatible with use of
XEN_DMOP_get_ioreq_server_info unless the XEN_DMOP_no_gfns flag is
set.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Certain memory resources associated with a guest are not necessarily
present in the guest P2M.
This patch adds the boilerplate for new memory op to allow such a resource
to be priv-mapped directly, by either a PV or HVM tools domain.
NOTE: Whilst the new op is not intrinsically specific to the x86 architecture,
I have no means to test it on an ARM platform and so cannot verify
that it functions correctly.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
A subsequent patch will introduce a new scheme to allow an emulator to
map ioreq server pages directly from Xen rather than the guest P2M.
This patch lays the groundwork for that change by deferring mapping of
gfns until their values are requested by an emulator. To that end, the
pad field of the xen_dm_op_get_ioreq_server_info structure is re-purposed
to a flags field and new flag, XEN_DMOP_no_gfns, defined which modifies the
behaviour of XEN_DMOP_get_ioreq_server_info to allow the caller to avoid
requesting the gfn values.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch re-works much of the ioreq server initialization and teardown
code:
- The hvm_map/unmap_ioreq_gfn() functions are expanded to call through
to hvm_alloc/free_ioreq_gfn() rather than expecting them to be called
separately by outer functions.
- Several functions now test the validity of the hvm_ioreq_page gfn value
to determine whether they need to act. This means can be safely called
for the bufioreq page even when it is not used.
- hvm_add/remove_ioreq_gfn() simply return in the case of the default
IOREQ server so callers no longer need to test before calling.
- hvm_ioreq_server_setup_pages() is renamed to hvm_ioreq_server_map_pages()
to mirror the existing hvm_ioreq_server_unmap_pages().
All of this significantly shortens the code.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
A subsequent patch will remove the current implicit limitation on creation
of ioreq servers which is due to the allocation of gfns for the ioreq
structures and buffered ioreq ring.
It will therefore be necessary to introduce an explicit limit and, since
this limit should be small, it simplifies the code to maintain an array of
that size rather than using a list.
Also, by reserving an array slot for the default server and populating
array slots early in create, the need to pass an 'is_default' boolean
to sub-functions can be avoided.
Some function return values are changed by this patch: Specifically, in
the case where the id of the default ioreq server is passed in, -EOPNOTSUPP
is now returned rather than -ENOENT.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Amit Singh Tomar
Julien Grall
Wei Liu
Marcello Seri
Andrew Cooper
Marek Marczykowski-Górecki
Petre Eftime
Jan Beulich
Sergey Dyasli
Razvan Cojocaru
Paul Durrant
Boris Ostrovsky