Originally when user runs ./configure --enable-systemd and systemd
development library is not available the build system silently disables
systemd support. This is not in line with normal expectation.
Instead, configure should error out when user has asked for systemd
support but development libraries can't be found.
Reported-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The original implementation of populate_pfns didn't consider the same
pfn can be present multiple times in the array. The mechanism to prevent
populating the same pfn multiple times only worked if the recurring pfn
appeared in different batches.
This bug is discovered by Linux 4.1 32 bit kernel save / restore test,
which has several ptes pointing to same pfn, which results in an array
containing recurring pfn. When libxc called x86_pv_localise_page, the
original implementation would populate the same pfn more than once.
The fix is to set bit in populated bitmap as we generate list of pfns to
be populated.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The prefix "Memory" is confusing because the numbers shown after that
are referring to frames.
Change a bunch of prefixes from "Memory" to "Frames". Also rename
send_memory_verify to verify_frames.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Previous the message was like:
SAVE:
xc: detail: 32 bits, 3 levels
xc: detail: max_pfn 0xfffff, p2m_frames 1024
xc: detail: max_mfn 0x130000
RESTORE:
xc: detail: max_mfn 0x130000
xc: detail: 32 bits, 3 levels
xc: detail: Expanded p2m from 0 to 0xfffff
It's not immediately clear that the last line in restore messages was
referring to max_pfn. Change the debug message a bit to make that
clearer.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Otherwise when building with 32bit compiler, we get:
xen-access.c: In function 'xenaccess_init':
xen-access.c:263:5: error: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'xen_pfn_t' [-Werror=format]
cc1: all warnings being treated as errors
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
When we create a source code tarball, mini-os is extracted to
extras/mini-os directory. When building a source code tarball, we
shouldn't clone mini-os again.
Only clone mini-os when that directory doesn't exist. This fixes tarball
build and doesn't affect non-tarball build.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Only 4KB allocation was using new_memflags. We should use new_memflags
in for 2MB and 1GB allocation as well because that variable contains
node information.
Without this patch, when creating a HVM guest with vNUMA, because the
node information was not present in the flags passed to libxc, actual
memory allocation didn't comply with what user specified. With this
patch the behaviour is correct.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
... but allow user to override that check by specifying maxvcpus= in xl
configuration file.
Note that the code is constructed such that the fallout is dealt with
after parsing. We can live with that because though it wastes a bit of
cpu cycles but it is still functionally correct and I would like to have
a clear split between parsing and dealing with fallouts.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We should parse the output from splitting function, not the original
string, otherwise the parsed result is wrong.
For example:
vnuma = [ [...,"vdistance=10,20",...],
[...,"vdistance=20,10",...] ]
Before this change, vdistance from node 0 to all nodes (including
itself) was 10 and vdistance from node 1 to all nodes was 20.
After this change, vdistance from node 0 to itself is 10, to node 1 is
20 and vdistance from node 1 to node 0 is 20, to itself is 10. That's
the correct vdistance settings we expect.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
There were two problems with original code:
1. sd_booted() was used to determined if the process was started by
systemd, which was wrong.
2. Exit with error if pidfile was specified, which was too harsh.
These two combined made cxenstored unable to start by hand if it ran
on a system which had systemd.
Fix issues with following changes:
1. Use sd_listen_fds to determine if the process is started by systemd.
2. Don't exit if pidfile is specified.
Rename function and restructure code to make things clearer.
A side effect of this patch is that gcc 4.8 with -Wmaybe-uninitialized
in non-debug build spits out spurious warning about sock and ro_sock
might be uninitialized. Since CentOS 7 ships gcc 4.8, we need to work
around that by setting sock and ro_sock to NULL at the beginning of
main.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
I missed the fact that next_bdf is used to parsed user supplied
strings when reviewing. The user supplied string is a NULL-terminated
string separated by comma. User can supply several PCI devices in that
string. There is, however, no delimiter for different devices, hence
we can't change the syntax of that string.
This patch reinstate the original implementation of next_bdf to
preserve the original syntax. The last argument for xc_assign_device
is always 0.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Initialise polFd to -1 before hand to avoid closing 0 by accident.
Also fixed some style problems while I was there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Always call init and dispose function on info_buf though it's not
always used.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Document how cpupool_info works. Distinguish success (ERROR_FAIL +
ENOENT) vs failure in libxl_list_cpupool and properly clean up the array
in failure path.
Also switch to libxl__realloc and call libxl_cpupool_{init,dispose}
where appropriate.
There is change of behaviour. Previously if memory allocation fails the
said function returns NULL. Now memory allocation failure is fatal. This
is in line with how we deal with memory allocation failure in other
places in libxl though.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In ea214001 ("x86/altp2m: add altp2mhvm HVM domain parameter"), a
check was added to ensure nestedhvm and altp2m cannot be enabled at
the same time. That check was added in xl, but in fact it should be in
libxl because it should be the entity that decides whether
the provided configuration is valid.
This patch moves the check to libxl. The code snippet is moved after
calling libxl__domain_build_info_setdefault so that we can:
1. remove libxl_defbool_is_default in `if()';
2. detect mistake in libxl__domain_build_info_setdefault.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Originally there was only one counter to keep track of pages. It was
used erroneously to keep track of how many pages were mapped and how
many pages needed to be sent. In the end munmap(2) always had 0 as the
length argument, which resulted in leaking the mapping.
This problem was discovered on 32bit toolstack because 32bit applications
have notably smaller address space. In fact this bug affects 64bit
toolstack too.
Use a separate counter to keep track of the number of mapped pages to
solve this problem.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Pid is a null terminated string allocated by asprintf. It should be
freed after use.
Also fixed a coding style problem while I was there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Call libxl_cpupoolinfo_init at the beginning. Change two returns to
goto out so that libxl_cpupoolinfo_dispose is called in failure path.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Don't dereference extra_config if it's NULL. Don't leak extra_config in
the end.
Also fixed a typo in error string while I was there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
One is to combine malloc + libxl__alloc_failed. The other is to avoid
dereferencing NULL pointer in case of malloc failure. Also use gc for
memory allocation and remove free() in second case.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
That argument should not be NULL. Let subsequent dereferencing crashes
the process.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In 415b58c1 (tools/libxc: Batch memory allocations for PV guests) the
number of super pages is calculated with the number of total pages. That
is wrong. It breaks PV guest vNUMA. The correct number of super pages
should be derived from the number of pages within that virtual NUMA
node.
Also change the name and type of super page variable to match the naming
convention and type of normal page variable. Make the necessary
adjustment to make code compile.
Reported-by: Dario Faggioli <dario.faggioli@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-and-Tested-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Xen's build system has a target for rump kernel called NetBSDRump. We
want to build libxc against rump kernel, so we need to copy NetBSD's
evtchn.h and privcmd.h to NetBSDRump. These copies is not very likely to
diverge from NetBSD's copies, but we don't preclude such possibility.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This reverts commit 0c029c4da2.
A new memory model that allows QEMU to bump memory behind libxl's back
was merged a few months ago. We didn't fully understand the
repercussions back then. Now it breaks migration and becomes blocker of
4.6 release.
It's better to restore to original behaviour at this stage of the
release cycle, that would put us in a position no worse than before, so
the release is unblocked.
The said function is still racy after reverting these two patches.
Making domain memory state consistent requires a bit more work. Separate
patch(es) will be sent out to deal with that problem.
Fix up conflicts with f5b43e95 (libxl: fix "xl mem-set" regression from
0c029c4da2).
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The statement to reset nb_watches should be in del_watches, not
del_transactions.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: David Scott <dave.scott@citrix.com>
Acked-by: David Scott <dave.scott@citrix.com>
[ ijc -- fix syntax error by adding a ";" to the previous line in the
new location and removing from the previous line in the old ]
This patch does following things:
1. Document v1 format.
2. Factor out function to handle QEMU restore data and function to
handle v1 blob for restore path.
3. Refactor save function to generate different blobs in the order
specified in format specification.
4. Change functions to use "goto out" idiom.
No functional changes introduced.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This patch does the following:
1. Use local variables for dummy vNUMA layout in PV case.
2. Avoid leaking dummy layout back to caller in PV case.
3. Use local variables to reference vNUMA layout (whether it is dummy
or provided by caller) for both PV and HVM.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
These files are leaked when using qemu-trad stubdom. They are
intermediate files created by libxc. Unfortunately they don't fit well
in our userdata scheme. Clean them up after we destroy all userdata,
we're sure they are not useful anymore at that point.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The snippet to destroy stubdom and the callback were added in 1fc3aeb3
("libxl: use new QEMU xenstore protocol"). The intention was to destroy
stubdom when it is not responsive. That approach is problematic because
rc is not propagate back to sdss->callback, hence the guest is leaked.
The solution is simple. The destruction of stubdom can be done later in
sdss->callback. That code path already does the right thing to destroy
both the guest and the stubdom that serves the guest.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This patch does two thing:
The original code erroneously fills in xc_hvm_build_args before
generating vmemranges. The effect is that guest memory is populated
without vNUMA information. Move the hunk to right place to fix this.
Move the subtraction of video ram to libxl__vnuma_build_vmemrange_hvm
because it's the central place for generating vmemranges.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Make the setup process similar to PV counterpart. That is, to allocate a
P2M array that covers the whole memory range and start from there. This
is clearer than using an array with no holes in it.
Also the dummy layout should take MMIO hole into consideration. We might
end up having two vmemranges in the dummy layout.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When building HVM guests, originally some fields of xc_hvm_build_args
are filled in xc_hvm_build (and buried in the wrong function), some are
set in libxl__build_hvm before passing xc_hvm_build_args to
xc_hvm_build. This is fragile.
After examining the code in xc_hvm_build that sets those fields, we can
in fact move setting of mmio_start etc in libxl. This way we consolidate
memory layout setting in libxl.
The setting of firmware data related fields is left in xc_hvm_build
because it depends on parsing ELF image. Those fields only point to
scratch data that doesn't affect memory layout.
There should be no change in the generated guest memory layout. But the
semantic is changed for xc_hvm_build. Toolstack that built directly on
top of libxc need to adjust to this change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: "Chen, Tiejun" <tiejun.chen@intel.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Originally both QEMU traditional and QEMU upstream used hardcoded
/local/domain/0 paths. This patch changes the protocol to use
/local/domain/$dm_domid path.
For QEMU traditional and upstream without stubdom, $dm_domid is 0 so
the path is in fact still /local/domain/0.
For QEMU traditional stubdom, this is incompatible protocol change.
However QEMU traditional is shipped with Xen so we are allowed to do
such change. This change requires to corresponding QEMU traditional
changeset.
There is no compatibility issue with QEMU upstream stubdom, because QEMU
upstream stubdom doesn't exist yet.
Watch /local/domain/$dm_domid/device-model/$domid/state, wait until
state turns "running" then unpause guest.
LIBXL_STUBDOM_START_TIMEOUT is the timeout used wait for stubdom to be
ready. My test on a very old machine (Core 2 6400) showed that it might
need more than 20s before the stubdom is ready to serve DomU.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Originally both QEMU traditional and QEMU upstream used hardcoded
/local/domain/0 paths. This patch changes the protocol to use
/local/domain/$dm_domid path.
For QEMU traditional and upstream without stubdom, $dm_domid is 0 so
the path is in fact still /local/domain/0.
For QEMU traditional stubdom, this is incompatible protocol change.
However QEMU traditional is shipped with Xen so we are allowed to do
such change. This change needs to work with corresponding QEMU
traditional changeset.
There is no compatibility issue with QEMU upstream stubdom, because QEMU
upstream stubdom doesn't exist yet.
Watch /local/domain/$dm_domid/device-model/$domid/state, wait until
state turns "running" then unpause guest.
LIBXL_STUBDOM_START_TIMEOUT is the timeout used wait for stubdom to be
ready. My test on a very old machine (Core 2 6400) showed that it might
need more than 20s before the stubdom is ready to serve DomU.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The function in question is libxl__spawn_local_dm. We should use
LIBXL_TOOLSTACK_DOMID when constructing xenstore path.
Currently LIBXL_TOOLSTACK_DOMID is 0, so this patch introduces no
functional change.
Use helper function to generate xenstore path.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
... and not devices_destroy_cb because it is the right place to clean up
device model stuff.
And the path should use LIBXL_TOOLSTACK_DOMID instead of hardcoded 0.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Factor out libxl__vsprintf. Use it to implement
libxl__device_model_xs_patch helper to return xenstore path for device
model to avoid handcoded paths.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- applied incremental fix to add PRINTF_ATTRIBUTE and tweak
whitespace ]
These APIs can be used to manipulate XLU_ConfigValue and XLU_ConfigList.
APIs introduced:
1. xlu_cfg_value_type
2. xlu_cfg_value_get_string
3. xlu_cfg_value_get_list
4. xlu_cfg_get_listitem2
Move some definitions from private header to public header as needed.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patches does following things:
1. Properly define a XLU_ConfigList type. Originally it was defined to
be XLU_ConfigSetting.
2. Define XLU_ConfigValue type, which can be either a string or a list
of XLU_ConfigValue.
3. ConfigSetting now references XLU_ConfigValue. Originally it only
worked with **string.
4. Properly construct list where necessary, see changes to .y file.
To achieve above changes:
1. xlu__cfg_set_mk and xlu__cfg_set_add are deleted, because they
are no more needed in the new code.
2. Introduce xlu__cfg_string_mk to make a XLU_ConfigSetting that points
to a XLU_ConfigValue that wraps a string.
3. Introduce xlu__cfg_list_mk to make a XLU_ConfigSetting that points
to XLU_ConfigValue that is a list.
4. The parser now generates XLU_ConfigValue instead of XLU_ConfigSetting
when construct values, which enables us to recursively generate list
of lists.
5. XLU_ConfigSetting is generated in xlu__cfg_set_store.
6. Adapt other functions to use new types.
No change to public API. Xl compiles without problem and 'xl create -n
guest.cfg' is valgrind clean.
This patch is needed because we're going to implement nested list
support, which requires support for list of list.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Disallow memory relocation when vNUMA is enabled, because relocated
memory ends up off node. Further more, even if we dynamically expand
node coverage in hvmloader, low memory and high memory may reside
in different physical nodes, blindly relocating low memory to high
memory gives us a sub-optimal configuration.
Introduce a function called libxl__vnuma_configured and use it.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Konrad Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Transform user supplied vNUMA configuration into libxl internal
representations then libxc representations. Check validity along the
line.
Libxc has more involvement in building vmemranges in HVM case compared
to PV case. The building of vmemranges is placed after xc_hvm_build
returns, because it relies on memory hole information provided by
xc_hvm_build.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The algorithm is more or less the same as the one used for PV guest.
Libxc gets hold of the mapping of vnode to pnode and size of each vnode
then allocate memory accordingly.
And then the function returns low memory end, high memory end and mmio
start to caller. Libxl needs those values to construct vmemranges for
that guest.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduce a arch-independent routine to generate one vmemrange per
vnode. Also introduce arch-dependent routines for different
architectures because part of the process is arch-specific -- ARM has
yet have NUMA support and E820 is x86 only.
For those x86 guests who care about machine E820 map (i.e. with
e820_host=1), vnode is further split into several vmemranges to
accommodate memory holes. A few stubs for libxl_arm.c are created.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This function is used to check whether vNUMA configuration (be it
auto-generated or supplied by user) is valid.
Define a new error code ERROR_VNUMA_CONFIG_INVALID.
The checks performed can be found in the comment of the function.
This vNUMA function (and future ones) is placed in a new file called
libxl_vnuma.c
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A vnode consists of one or more vmemranges (virtual memory range). One
example of multiple vmemranges is that there is a hole in one vnode.
Currently we haven't exported vmemrange interface to libxl user.
Vmemranges are generated during domain build, so we have relevant
structures in domain build state.
Later if we discover we need to export the interface, those structures
can be moved to libxl_domain_build_info as well.
These new fields (along with other fields in that struct) are set to 0
at start of day so we don't need to explicitly initialise them. A
following patch which introduces an independent checking function will
need to access these fields. I don't feel very comfortable squashing
this change into that one so I didn't use a single commit.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
From libxc's point of view, it only needs to know vnode to pnode mapping
and size of each vnode to allocate memory accordingly. Add these fields
to xc_dom structure.
The caller might not pass in vNUMA information. In that case, a dummy
layout is generated for the convenience of libxc's allocation code. The
upper layer (libxl etc) still sees the domain has no vNUMA
configuration.
Note that for this patch on PV x86 guest can have multiple regions of
ram allocated.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Elena Ufimtseva <ufimtseva@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add a new field p2m_size to keep track of the number of pages covered by
p2m. Change total_pages to p2m_size in functions which in fact need
the size of p2m.
This is needed because we are going to ditch the assumption that PV x86
has only one contiguous ram region. Originally the p2m size was always
equal to total_pages, but we will soon change that in later patch.
This patch doesn't change the behaviour of libxc.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently all in tree code doesn't set the superpage flag, I would just
remove superpage support if I can, but Konrad wants it retained for the
moment.
As I'm going to change the p2m_host array allocation, duplicate the code
snippet to allocate p2m_host array in this patch, so that we retain the
behaviour in superpage case.
This patch introduces no functional change and it will make future patch
easier to review. Also removed one stray tab while I was there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Wilk <konrad.wilk@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Make XENMEM_increase_reservation and XENMEM_populate_physmap
vNUMA-aware.
That is, if guest requests Xen to allocate memory for specific vnode,
Xen can translate vnode to pnode using vNUMA information of that guest.
XENMEMF_vnode is introduced for the guest to mark the node number is in
fact virtual node number and should be translated by Xen.
XENFEAT_memory_op_vnode_supported is introduced to indicate that Xen is
able to translate virtual node to physical node.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Hand struct domain via struct memops_arg's respective field to
construct_memop_from_reservation().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Wei Liu