For one xc_private.h needlessly repeats xen-tools/libs.h's definition.
And then there are two suspicious uses (resulting from the inconsistency
with the respective 2nd parameter of DIV_ROUNDUP()): While the one in
tools/console/daemon/io.c - as per the code comment - intentionally uses
8 as the second argument (meaning to align to a multiple of 256), the
one in alloc_magic_pages_hvm() pretty certainly does not: There the goal
is to align to a uint64_t boundary, for the following module struct to
end up aligned.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
For log-dirty operations a 64-bit field is being truncated to become an
"int" return value. Seeing the large number of arguments the present
function takes, reduce its set of parameters to that needed for all
operations not involving the log-dirty bitmap, while introducing a new
wrapper for the log-dirty bitmap operations. This new function in turn
doesn't need an "mb" parameter, but has a 64-bit return type. (Using the
return value in favor of a pointer-type parameter is left as is, to
disturb callers as little as possible.)
While altering xc_shadow_control() anyway, also adjust the types of the
last two of the remaining parameters.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
We unconditionally set HTT, so merely doubling the value read from
hardware isn't going to be correct if that value is zero.
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Julien Grall <julien@xen.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Xen may not support 32-bit PV guest for a number of reasons (lack of
CONFIG_PV32, explicit pv=no-32 command line argument, or implicitly
due to CET being enabled) and advertises this to the toolstack via the
absence of xen-3.0-x86_32p ABI.
Currently, when trying to boot a 32-bit PV guest, the ABI check is too
late and the build explodes in the following manner yielding an
unhelpful error message:
xc: error: panic: xg_dom_boot.c:121: xc_dom_boot_mem_init: can't allocate low memory for domain: Out of memory
libxl: error: libxl_dom.c:586:libxl__build_dom: xc_dom_boot_mem_init failed: Operation not supported
libxl: error: libxl_create.c:1573:domcreate_rebuild_done: Domain 1:cannot (re-)build domain: -3
libxl: error: libxl_domain.c:1182:libxl__destroy_domid: Domain 1:Non-existant domain
libxl: error: libxl_domain.c:1136:domain_destroy_callback: Domain 1:Unable to destroy guest
libxl: error: libxl_domain.c:1063:domain_destroy_cb: Domain 1:Destruction of domain failed
Move the ABI check earlier into xc_dom_parse_image() along with other
ELF-note feature checks. With this adjustment, it now looks like
this:
xc: error: panic: xg_dom_boot.c:88: xc_dom_compat_check: guest type xen-3.0-x86_32p not supported by xen kernel, sorry: Invalid kernel
libxl: error: libxl_dom.c:571:libxl__build_dom: xc_dom_parse_image failed
domainbuilder: detail: xc_dom_release: called
libxl: error: libxl_create.c:1573:domcreate_rebuild_done: Domain 11:cannot (re-)build domain: -3
libxl: error: libxl_domain.c:1182:libxl__destroy_domid: Domain 11:Non-existant domain
libxl: error: libxl_domain.c:1136:domain_destroy_callback: Domain 11:Unable to destroy guest
libxl: error: libxl_domain.c:1063:domain_destroy_cb: Domain 11:Destruction of domain failed
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Valid GFNs (having a representation in the dirty bitmap) need to be
strictly below p2m_size.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
minfo->p2m_size may have more than 31 significant bits. Change the
induction variable to unsigned long, and (largely for signed-ness
consistency) a helper variable to unsigned int. While there also avoid
open-coding min().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
918b8842a8 changed CPSR and SPSR to be stored as 64bit values.
This is fixing the print size in some tools to use 64bit type.
Fixes: 918b8842a8 ("arm64: Change type of hsr, cpsr, spsr_el1 to uint64_t")
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Michal Orzel <michal.orzel@arm.com>
Tested-by: Michal Orzel <michal.orzel@arm.com>
Introduce a helper which decides if a given pfn type has data
in the migration stream.
No change in behaviour intended, except for invalid page types which now
have a safer default.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Introduce a helper which decides if a given pfn in the migration
stream is backed by memory.
This highlights more clearly that type XEN_DOMCTL_PFINFO_XALLOC (a
synthetic toolstack-only type used between Xen 4.2 to 4.5 which
indicated a dirty page on the sending side for which no data will be
send in the initial iteration) does get populated in the VM.
No change in behaviour intended, except for invalid page types which now
have a safer default.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Users of xc_get_pfn_type_batch may want to sanity check the data
returned by Xen. Add helpers for this purpose:
is_known_page_type verifies the type returned by Xen on the saving
side, or the incoming type for a page on the restoring side, is known
by the save/restore code.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The code has gone through many refactors, but the first refactor was the one
which broke it by inverting the check with respect to checkpointed streams.
Fixes: 7449fb36c6 ("migration/save: pass checkpointed_stream from libxl to libxc")
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
0x1c is lower than any value which will actually be observed in
p->extd.max_leaf, but higher than the logical 9 leaves worth of extended data
on Intel systems, causing x86_cpuid_copy_to_buffer() to fail with -ENOBUFS.
Correct the calculation.
The problem was first noticed in c/s 34990446ca "libxl: don't ignore the
return value from xc_cpuid_apply_policy" but introduced earlier.
Fixes: 111c8c33a8 ("x86/cpuid: do not expand max leaves on restore")
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
... so tests can peek at the internals, without the structure being generally
available to users of the library.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The reasoning for commit 7bd8989ab7 ("tools/libs/guest: fix max_pfn
setting in map_p2m()") was wrong.
The max_pfn field in shared_info is misnamed, it has the semantics of
num_pfns, which is hidden at least partially in Linux, as the kernel is
(wrongly) treating it like the highest used pfn in some places.
So revert above commit.
Fixes: 7bd8989ab7 ("tools/libs/guest: fix max_pfn setting in map_p2m()")
Signed-off-by: Juergen Gross <jgross@suse.com>
After 32-bit PV-guests have been security de-supported when not running
under PV-shim, the hypervisor will no longer be configured to support
those domains per default when not being built as PV-shim.
Unfortunately libxenguest will fail saving or restoring a PV domain
due to this restriction, as it is trying to get the compat MFN list
even for 64 bit guests.
Fix that by obtaining the compat MFN list only for 32-bit PV guests.
Fixes: 1a0f2fe229 ("SUPPORT.md: Un-shimmed 32-bit PV guests are no longer supported")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
There are some definitions which are used in libxenguest only now.
Move them from libxenctrl over to libxenguest.
Remove an unused macro.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
The functionality in xc_core* should be part of libxenguest instead
of libxenctrl. Users are already either in libxenguest, or in xl.
There is one single exception: xc_core_arch_auto_translated_physmap()
is being used by xc_domain_memory_mapping(), which is used by qemu.
So leave the xc_core_arch_auto_translated_physmap() functionality in
libxenctrl.
This will make it easier to merge common functionality of xc_core*
and xg_sr_save*.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
The guest suspend functionality is already part of libxenguest. Move
the resume functionality from libxenctrl to libxenguest, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
The core of a pv linux guest produced via "xl dump-core" is nor usable
as since kernel 4.14 only the linear p2m table is kept if Xen indicates
it is supporting that. Unfortunately xc_core_arch_map_p2m() is still
supporting the 3-level p2m tree only.
Fix that by copying the functionality of map_p2m() from libxenguest to
libxenctrl.
Additionally the mapped p2m isn't of a fixed length now, so the
interface to the mapping functions needs to be adapted. In order not to
add even more parameters, expand struct domain_info_context and use a
pointer to that as a parameter.
Fixes: dc6d609371 ("libxc: set flag for support of linear p2m list in domain builder")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
When setting the highest pfn used in the guest, don't subtract 1 from
the value read from the shared_info data. The value read already is
the correct pfn.
Fixes: 91e204d37f ("libxc: try to find last used pfn when migrating")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
The legacy __xen_guest section doesn't support the PHYS32_ENTRY
elfnote, so it's pointless to attempt to parse the elfnotes from that
section when called from an hvm container.
Pass an hvm boolean parameter to the elf note parsing routine, so that
the respective parsing can be suppressed in case libelf is dealing with
an hvm container.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The TAA mitigation offered the option to hide the HLE and RTM CPUID bits,
which has caused some migration compatibility problems.
These two bits are special. Annotate them with ! to emphasise this point.
Hardware Lock Elision (HLE) may or may not be visible in CPUID, but is
disabled in microcode on all CPUs, and has been removed from the architecture.
Do not advertise it to VMs by default.
Restricted Transactional Memory (RTM) may or may not be visible in CPUID, and
may or may not be configured in force-abort mode. Have tsx_init() note
whether RTM has been configured into force-abort mode, so
guest_common_feature_adjustments() can conditionally hide it from VMs by
default.
The host policy values for HLE/RTM may or may not be set, depending on any
previous running kernel's choice of visibility, and Xen's choice. TSX is
available on any CPU which enumerates a TSX-hiding mechanism, so instead of
doing a two-step to clobber any hiding, scan CPUID, then set the visibility,
just force visibility of the bits in the first place.
With the HLE/RTM bits now unilaterally visible in the host policy,
xc_cpuid_apply_policy() can construct a more appropriate policy out of thin
air for pre-4.13 VMs with no CPUID data in their migration stream, and
specifically one where HLE/RTM doesn't potentially disappear behind the back
of a running VM.
Fixes: 8c4330818f ("x86/spec-ctrl: Mitigate the TSX Asynchronous Abort sidechannel")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Gitlab CI spotted an issue when building the tools Arm:
xg_dom_arm.c: In function 'meminit':
xg_dom_arm.c:401:50: error: passing argument 3 of 'set_mode' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
401 | rc = set_mode(dom->xch, dom->guest_domid, dom->guest_type);
| ~~~^~~~~~~~~~~~
This is because the const was not propagated in the Arm code. Fix it
by constifying the 3rd parameter of set_mode().
Fixes: 8fc4916daf ("tools/libs: guest: Use const whenever we point to literal strings")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
literal strings are not meant to be modified. So we should use const
*char rather than char * when we want to store a pointer to them.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
It is bad form in C, perhaps best demonstrated by trying to read
xc_cpu_policy_destroy(), and causes const qualification to have
less-than-obvious behaviour (the hidden pointer becomes const, not the thing
it points at).
xc_cpu_policy_set_domain() needs to drop its (now normal) const qualification,
as the policy object is modified by the serialisation operation.
This also shows up a problem with the x86_cpu_policies_are_compatible(), where
the intermediate pointers are non-const.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Such helpers is just a wrapper to the existing
x86_cpu_policies_are_compatible function. This requires building
policy.c from libx86 on user land also.
No user of the interface introduced.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a helper to update the MSR policy using an array of
xen_msr_entry_t entries. Note the MSRs present in the input
xen_msr_entry_t array will replace any existing entries on the
policy.
No user of the interface introduced on this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a helper to update the CPUID policy using an array of
xen_cpuid_leaf_t entries. Note the leaves present in the input
xen_cpuid_leaf_t array will replace any existing leaves on the policy.
No user of the interface introduced on this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Such helper is very similar to the existing xc_set_domain_cpu_policy
interface, but takes an opaque xc_cpu_policy_t instead of arrays of
CPUID leaves and MSRs.
No callers of the interface introduced in this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
With the introduction of xc_cpu_policy_get_{system,domain} and
xc_cpu_policy_serialise the current users of
xc_get_{system,domain}_cpu_policy can be switched to the new
interface.
Note that xc_get_{system,domain}_cpu_policy is removed from the public
interface and the functions are made static, since there are still
internal consumers in xg_cpuid_x86.c
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Such helper allow converting a cpu policy into an array of
xen_cpuid_leaf_t and xen_msr_entry_t elements, which matches the
current interface of the CPUID/MSR functions. This is required in
order for the user to be able to parse the CPUID/MSR data.
No user of the interface introduced in this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Such helper is based on the existing functions to fetch a CPUID and
MSR policies, but uses the xc_cpu_policy_t type to return the data to
the caller.
No user of the interface introduced on the patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Such helper is based on the existing functions to fetch a CPUID and
MSR policies, but uses the xc_cpu_policy_t type to return the data to
the caller.
Note some helper functions are introduced, those are split from
xc_cpu_policy_get_system because they will be used by other functions
also.
No user of the interface introduced on the patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce an opaque type that is used to store the CPUID and MSRs
policies of a domain. Such type uses the existing {cpuid,msr}_policy
structures to store the data, but doesn't expose the type to the users
of the xenguest library. There are also two arrays to allow for easier
serialization without requiring an allocation each time.
Introduce an allocation (init) and freeing function (destroy) to
manage the type.
Note the type is not yet used anywhere.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Preparatory change to introduce a new set of xc_cpu_policy_* functions
that will replace the current CPUID/MSR helpers.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When restoring limit the maximum leaves to the ones supported by Xen
4.12 in order to not expand the maximum leaves a guests sees. Note
this is unlikely to cause real issues.
Guests restored from Xen versions 4.13 or greater will contain CPUID
data on the stream that will override the values set by
xc_cpuid_apply_policy.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In all cases the kernel build makes available the uncompressed size in
the final 4 bytes of the bzImage payload. Utilize this to avoid
repeated realloc()ing of the output buffer.
As a side effect this also addresses the previous mistaken return of 0
(success) from xc_try_{bzip2,lzma,xz}_decode() in case
xc_dom_register_external() would have failed.
As another side effect this also addresses the first error path of
_xc_try_lzma_decode() previously bypassing lzma_end().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
using max undermines the separation between default and max. For
example, turning off AVX512F on an MPX-capable system silently turns on
MPX, despite this not being part of the default policy anymore. Since
the information is used only for determining what to convert 'x' to (but
not to e.g. validate '1' settings), the effect of this change is
identical for guests with (suitable) "cpuid=" settings to that of the
changes separating default from max and then converting (e.g.) MPX from
being part of default to only being part of max for guests without
(affected) "cpuid=" settings.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The individual decompression CUs need to only surface their top level
functions to other code. Arrange for everything else to be static, to
make sure no undue uses of that code exist or will appear without
explicitly noticing. (In some cases this also results in code size
reduction, but since this is all init-only code this probably doesn't
matter very much.)
In the LZO case also take the opportunity and convert u8 where lines
get touched anyway.
The downside is that the top level functions will now be non-static
in stubdom builds of libxenguest, but I think that's acceptable. This
does require declaring them first, though, as the compiler warns about
the lack of declarations.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Various version of gcc, when compiling with -Og, complain:
xg_dom_arm.c: In function 'meminit':
xg_dom_arm.c:420:19: error: 'p2m_size' may be used uninitialized in this function [-Werror=maybe-uninitialized]
420 | dom->p2m_size = p2m_size;
| ~~~~~~~~~~~~~~^~~~~~~~~~
This is actually entirely stale code since ee21f10d70^..97e34ad22d which
removed the 1:1 identity p2m for translated domains.
Drop the write of d->p2m_size, and the p2m_size local variable. Reposition
the p2m_size field in struct xc_dom_image and correct some stale
documentation.
This change really ought to have been part of the original cleanup series.
No actual change to how ARM domains are constructed.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Various version of gcc, when compiling with -Og, complain:
xg_sr_common_x86.c: In function 'write_x86_cpu_policy_records':
xg_sr_common_x86.c:92:12: error: 'rc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
92 | return rc;
| ^~
The complaint is legitimate, and can occur with unexpected behaviour of two
related hypercalls in combination with a libc which permits zero-length
malloc()s.
Have an explicit rc = 0 on the success path, and make the MSRs record error
handling consistent with the CPUID record before it.
Fixes: f6b2b8ec53 ("libxc/save: Write X86_{CPUID,MSR}_DATA records")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce an autoconf macro to check for the include path of certain
headers that can be different between OSes.
Use such macro to find the correct path for the endian.h header, and
modify the users of endian.h to use the output of such check.
Suggested-by: Ian Jackson <iwj@xenproject.org>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
While the lack of proper dependency tracking of #include-d files is
wider than just the libs/ subtree, dealing with the problem universally
there or in tools/Rules.mk is too much of a risk at this point in the
release cycle. Add the missing inclusion of $(DEPS_INCLUDE) only in the
specific Makefile-s, after having checked that their prior Makefile-s
had such includes.
Interestingly the $(DEPS_RM) use is present in tools/libs/libs.mk's
clean target, so doesn't need taking care of in individual Makefile-s.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Ian Jackson <iwj@xenproject.org>
Add a DOMPRINTF() other methods have, indicating success. To facilitate
this, introduce an "outsize" local variable and update *size as well as
*blob only once done. The latter then also avoids leaving a pointer to
freed memory in dom->kernel_blob in case of a decompression error.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Release-Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This follows the logic used for other decompression methods utilizing an
external library, albeit here we can't ignore the 32-bit size field
appended to the compressed image - its presence causes decompression to
fail. Leverage the field instead to allocate the output buffer in one
go, i.e. without incrementally realloc()ing.
As far as configure.ac goes, I'm pretty sure there is a better (more
"standard") way of using PKG_CHECK_MODULES(). The construct also gets
put next to the other decompression library checks, albeit I think they
all ought to be x86-specific (e.g. placed in the existing case block a
few lines down).
Note that, where possible, instead of #ifdef-ing xen/*.h inclusions,
they get removed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Abstract xc_dom_check_gzip()'s reading of the uncompressed size into a
helper re-usable, in particular, by other decompressor code.
Sadly in the mini-os case this conflicts with other functions of the
same name (and purpose), which can't be easily replaced individually.
Yet it was requested that no full set of helpers be introduced at this
point in the release cycle. Hence the awkward XG_NEED_UNALIGNED.
Requested-by: Ian Jackson <iwj@xenproject.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Just code movement as a preparatory change before xg_sr_* will be moved.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Jan Beulich
Jane Malalane
Bertrand Marquis
Olaf Hering
Andrew Cooper
Juergen Gross
Roger Pau Monné
Julien Grall