Gcc 11 looks to make incorrect assumptions about valid ranges that
pointers may be used for addressing when they are derived from e.g. a
plain constant. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100680.
Utilize RELOC_HIDE() to work around the issue, which for x86 manifests
in at least
- mpparse.c:efi_check_config(),
- tboot.c:tboot_probe(),
- tboot.c:tboot_gen_frametable_integrity(),
- x86_emulate.c:x86_emulate() (at -O2 only).
The last case is particularly odd not just because it only triggers at
higher optimization levels, but also because it only affects one of at
least three similar constructs. Various "note" diagnostics claim the
valid index range to be [0, 2⁶³-1].
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
The parameter of check_domains() is not used within the function. In fact,
this was a left over of the original implementation as the version merged
doesn't need to know whether we are restoring.
So remove it.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Literal strings are not meant to be modified. So we should use const
char * rather than char * when we want to store a pointer to them.
Take the opportunity to remove the cast (char *) in console_init(). It
is unnecessary and will remove the const.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
As of commit d155e4aef3 ("xen: Allow EXPERT mode to be selected from
the menuconfig directly") EXPERT is a regular config option (which the
shim default config also enables).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <rogerpau@citrix.com>
Some intermediate files weren't considered at all at the time. Also
after its introduction, various changes to the build environment have
rendered the exclusion sets stale. For example, we now have some .*.cmd
files in the build tree. Combine all respective patterns into a single
.* one, seeing that we don't have any actual source files matching this
pattern in the tree. Add other patterns as well as individual files.
Also introduce LINK_EXCLUDE_PATHS to deal with entire directories full
of generated headers as well as a few specific files the names of which
are too generic to list under LINK_EXCLUDES.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Gitlab CI spotted an issue when building the tools Arm:
xg_dom_arm.c: In function 'meminit':
xg_dom_arm.c:401:50: error: passing argument 3 of 'set_mode' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
401 | rc = set_mode(dom->xch, dom->guest_domid, dom->guest_type);
| ~~~^~~~~~~~~~~~
This is because the const was not propagated in the Arm code. Fix it
by constifying the 3rd parameter of set_mode().
Fixes: 8fc4916daf ("tools/libs: guest: Use const whenever we point to literal strings")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The field text in stat_map_t will point to string literals. So mark it
as const to allow the compiler to catch any modified of the string.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Neither string parameter in set_prompt() and set_delay() are meant to
be modified. In particular, new_prompt can point to a literal string.
So mark the two parameters as const and propagate it.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
literal strings are not meant to be modified. So we should use const
char * rather than char * when we we to store a pointer to them.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
literal strings are not meant to be modified. So we should use const
char * rather than char * when we want to store a pointer to them.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
literal strings are not meant to be modified. So we should use const
*char rather than char * when we want to store a pointer to them.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
The main loop of xenstored is rather complicated due to different
handling of socket and ring-page interfaces. Unify that handling by
introducing interface type specific functions can_read() and
can_write().
Take the opportunity to remove the empty list check before calling
write_messages() because the function is already able to cope with an
empty list.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Put the interface type specific functions into an own structure and let
struct connection contain only a pointer to that new function vector.
Don't even define the socket based functions in case of NO_SOCKETS
(Mini-OS).
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The Makefile of xenstore and related to that the global .gitignore
file contain some leftovers from ancient times. Remove those.
While at it sort the tools/xenstore/* entries in .gitignore.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
All of the sudden, besides .text and .rodata and alike, an always
present .note.gnu.property section has appeared. This section, when
converting to binary format output, gets placed according to its
linked address, causing the resulting blobs to be about 128Mb in size.
The resulting headers with a C representation of the binary blobs then
are, of course all a multiple of that size (and take accordingly long
to create). I didn't bother waiting to see what size the final
test_x86_emulator binary then would have had.
See also https://sourceware.org/bugzilla/show_bug.cgi?id=27753.
Rather than figuring out whether gas supports -mx86-used-note=, simply
remove the section while creating *.bin.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
The sysconfig variable XENSTORED_ROOTDIR is not used anymore.
It used to point to a directory with tdb files, which is now a tmpfs.
In case the database is not in tmpfs, like on sysv and BSD systems,
xenstored will truncate existing database files during start.
Fixes: 2ef6ace428 ("tools: don't remove tdb data base file before starting xenstored")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Commit e867af081d "tools/xenstore: save new binary for live update"
seemed to have spuriously changed the indentation of the first line of
the copyright header.
The previous indentation is re-instated so all the lines are indented
the same.
Reported-by: Bjoern Doebel <doebel@amazon.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
ASAN reported one issue when Live Updating Xenstored:
=================================================================
==873==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7ffc194f53e0 at pc 0x555c6b323292 bp 0x7ffc194f5340 sp 0x7ffc194f5338
WRITE of size 1 at 0x7ffc194f53e0 thread T0
#0 0x555c6b323291 in dump_state_node_perms xen/tools/xenstore/xenstored_core.c:2468
#1 0x555c6b32746e in dump_state_special_node xen/tools/xenstore/xenstored_domain.c:1257
#2 0x555c6b32a702 in dump_state_special_nodes xen/tools/xenstore/xenstored_domain.c:1273
#3 0x555c6b32ddb3 in lu_dump_state xen/tools/xenstore/xenstored_control.c:521
#4 0x555c6b32e380 in do_lu_start xen/tools/xenstore/xenstored_control.c:660
#5 0x555c6b31b461 in call_delayed xen/tools/xenstore/xenstored_core.c:278
#6 0x555c6b32275e in main xen/tools/xenstore/xenstored_core.c:2357
#7 0x7f95eecf3d09 in __libc_start_main ../csu/libc-start.c:308
#8 0x555c6b3197e9 in _start (/usr/local/sbin/xenstored+0xc7e9)
Address 0x7ffc194f53e0 is located in stack of thread T0 at offset 80 in frame
#0 0x555c6b32713e in dump_state_special_node xen/tools/xenstore/xenstored_domain.c:1232
This frame has 2 object(s):
[32, 40) 'head' (line 1233)
[64, 80) 'sn' (line 1234) <== Memory access at offset 80 overflows this variable
This is happening because the callers are passing a pointer to a variable
allocated on the stack. However, the field perms is a dynamic array, so
Xenstored will end up to read outside of the variable.
Rework the code so the permissions are written one by one in the fd.
Fixes: ed6eebf17d ("tools/xenstore: dump the xenstore state for live update")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
According to syslog(3) the fmt string does not need a newline.
The mini-os implementation of syslog requires the trailing newline.
Other calls to syslog do include the newline already, add it also to WRL_LOG.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
--log does not take a file, it specifies what is supposed to be logged.
Also separate the XENSTORED and XENCONSOLED variables by a newline.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
It is bad form in C, perhaps best demonstrated by trying to read
xc_cpu_policy_destroy(), and causes const qualification to have
less-than-obvious behaviour (the hidden pointer becomes const, not the thing
it points at).
xc_cpu_policy_set_domain() needs to drop its (now normal) const qualification,
as the policy object is modified by the serialisation operation.
This also shows up a problem with the x86_cpu_policies_are_compatible(), where
the intermediate pointers are non-const.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
literal strings are not meant to be modified. So we should use const
char * rather than char * when we want to store a pointer to them.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
sysconfig files are not mandatory.
Adjust xen-init-dom0.service to handle a missing sysconfig file by
prepending a dash to the to-be-sourced filename.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
sysconfig files are not mandatory.
Adjust xenconsoled.service to handle a missing sysconfig file by
prepending a dash to the to-be-sourced filename.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Also constify cmdtable_len and make use of ARRAY_SIZE, which is
available in "xen-tools/libs.h".
The entries in cmd_table don't need to be modified once xl is running.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Such helpers is just a wrapper to the existing
x86_cpu_policies_are_compatible function. This requires building
policy.c from libx86 on user land also.
No user of the interface introduced.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a helper to update the MSR policy using an array of
xen_msr_entry_t entries. Note the MSRs present in the input
xen_msr_entry_t array will replace any existing entries on the
policy.
No user of the interface introduced on this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a helper to update the CPUID policy using an array of
xen_cpuid_leaf_t entries. Note the leaves present in the input
xen_cpuid_leaf_t array will replace any existing leaves on the policy.
No user of the interface introduced on this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Also change libxl__cpuid_legacy to propagate the error from
xc_cpuid_apply_policy into callers.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Since we support PKU for HVM guests, the respective insns should also be
recognized by the emulator.
In emul_test_read_cr() instead of further extending the comment to
explain the hex numbers, switch to using X86_CR4_* values.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Further changes will rely on MSR entries being sorted, so add a test
to assert it.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Such helper is very similar to the existing xc_set_domain_cpu_policy
interface, but takes an opaque xc_cpu_policy_t instead of arrays of
CPUID leaves and MSRs.
No callers of the interface introduced in this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
With the introduction of xc_cpu_policy_get_{system,domain} and
xc_cpu_policy_serialise the current users of
xc_get_{system,domain}_cpu_policy can be switched to the new
interface.
Note that xc_get_{system,domain}_cpu_policy is removed from the public
interface and the functions are made static, since there are still
internal consumers in xg_cpuid_x86.c
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Such helper allow converting a cpu policy into an array of
xen_cpuid_leaf_t and xen_msr_entry_t elements, which matches the
current interface of the CPUID/MSR functions. This is required in
order for the user to be able to parse the CPUID/MSR data.
No user of the interface introduced in this patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Such helper is based on the existing functions to fetch a CPUID and
MSR policies, but uses the xc_cpu_policy_t type to return the data to
the caller.
No user of the interface introduced on the patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Such helper is based on the existing functions to fetch a CPUID and
MSR policies, but uses the xc_cpu_policy_t type to return the data to
the caller.
Note some helper functions are introduced, those are split from
xc_cpu_policy_get_system because they will be used by other functions
also.
No user of the interface introduced on the patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce an opaque type that is used to store the CPUID and MSRs
policies of a domain. Such type uses the existing {cpuid,msr}_policy
structures to store the data, but doesn't expose the type to the users
of the xenguest library. There are also two arrays to allow for easier
serialization without requiring an allocation each time.
Introduce an allocation (init) and freeing function (destroy) to
manage the type.
Note the type is not yet used anywhere.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Preparatory change to introduce a new set of xc_cpu_policy_* functions
that will replace the current CPUID/MSR helpers.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When restoring limit the maximum leaves to the ones supported by Xen
4.12 in order to not expand the maximum leaves a guests sees. Note
this is unlikely to cause real issues.
Guests restored from Xen versions 4.13 or greater will contain CPUID
data on the stream that will override the values set by
xc_cpuid_apply_policy.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The command line option -M/--path-max was meant to be added by
commit 924bf8c793 "tools/xenstore: rework path length check" but this
wasn't wired through properly.
Fix it by adding the missing "case 'M':".
Fixes: 924bf8c793 ("tools/xenstore: rework path length check")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
A prototype for dump_conn() has been present for quite a long time
but there are no implementation. Even, AFAICT in the patch that
introduced it. So drop it.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
AMD Milan (Zen3) CPUs have an LFENCE Always Serialising CPUID bit in
leaf 80000021.eax. Previous AMD versions used to have a user settable
bit in DE_CFG MSR to select whether LFENCE was dispatch serialising,
which Xen always attempts to set. The forcefully always on setting is
due to the addition of SEV-SNP so that a VMM cannot break the
confidentiality of a guest.
In order to support this new CPUID bit move the LFENCE_DISPATCH
synthetic CPUID bit to map the hardware bit (leaving a hole in the
synthetic range) and either rely on the bit already being set by the
native CPUID output, or attempt to fake it in Xen by modifying the
DE_CFG MSR. This requires adding one more entry to the featureset to
support leaf 80000021.eax.
The bit is always exposed to guests by default even if the underlying
hardware doesn't support leaf 80000021. Note that Xen doesn't allow
guests to change the DE_CFG value, so once set by Xen LFENCE will always
be serialising.
Note that the access to DE_CFG by guests is left as-is: reads will
unconditionally return LFENCE_SERIALISE bit set, while writes are
silently dropped.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
[Always expose to guests by default]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Zapping leaf data for out of range leaves is just one half of it: To
avoid guests (bogusly or worse) inferring information from mere leaf
presence, also shrink maximum indicators such that the respective
trailing entry is not all blank (unless of course it's the initial
subleaf of a leaf that's not the final one).
This is also in preparation of bumping the maximum basic leaf we
support, to ensure guests not getting exposed related features won't
observe a change in behavior.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
The removed lines were initially added by commit 314e64084d, but the
subsequent code which was using the nb_vm variable was later removed by
commit 2ba368d138, which makes these lines of code an overlooked
reminiscence. Moreover, the call becomes very expensive when there is a
considerable number of VMs (~1000 instances) running on the host.
Signed-off-by: Costin Lupu <costin.lupu@cs.pub.ro>
Acked-by: Wei Liu <wl@xen.org>
Like ERMS this can always be exposed to guests, but I guess once we
introduce full validation we want to make sure we don't reject incoming
policies with any of these set when in the raw/host policies they're
clear.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Implementing qrexec+usbip+qemu in Linux-based stub domain leads me to
an issue where a device model stub domain doesn't have maptrack entries.
Signed-off-by: Dmitry Fedorov <d.fedorov@tabit.pro>
Acked-by: Wei Liu <wl@xen.org>
While part of the original AMD64 spec, Long Mode Segment Limit was a feature
not picked up by Intel, and therefore didn't see much adoption in software.
AMD have finally dropped the feature from hardware, and allocated a CPUID bit
to indicate its absence.
Xen has never supported the feature for guests, even when running on capable
hardware, so advertise the feature's absence unilaterally.
There is nothing specifically wrong with exposing this bit to PV guests, but
the PV ABI doesn't include a working concept of MSR_EFER in the first place,
so exposing it to PV guests would be out-of-place.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
In all cases the kernel build makes available the uncompressed size in
the final 4 bytes of the bzImage payload. Utilize this to avoid
repeated realloc()ing of the output buffer.
As a side effect this also addresses the previous mistaken return of 0
(success) from xc_try_{bzip2,lzma,xz}_decode() in case
xc_dom_register_external() would have failed.
As another side effect this also addresses the first error path of
_xc_try_lzma_decode() previously bypassing lzma_end().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Jan Beulich
Julien Grall
Juergen Gross
Olaf Hering
Andrew Cooper
Anthony PERARD
Roger Pau Monne
Costin Lupu
Dmitry Fedorov