The domain save code will read an HVM param, and if it's not zero,
make an entry for it. However, if the hypercall fails for any reason,
the data may not be written, and the value for the previous parameter
may be written in the save file as the parameter that failed.
Initialize the value to zero before each hypercall, so that in case of
a failure, no value will be written.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch fixes the following error in recent kernel:
ia64/asm/dom_fw_common.h:47:23: error: asm/fpswa.h: No such file or
directory
Signed-off-by: KUWAMURA Shin'ya <kuwa@jp.fujitsu.com>
According to lzma's configure.ac (!) the minimum memory limit to cope
with arbitrary input is 128Mby (!)
This is obviously an unreasonable amount of memory for this kind of
task, but we need to increase the constant limit for it not to
randomly fail. So do so.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Constantly m(un)locking memory can have significant overhead on
systems with large numbers of CPUs. This was previously fixed by
20841:fbe8f32fa257 but this was dropped during the transition to
hypercall buffers.
Introduce a small cache of single page hypercall buffer allocations
which can be resused to avoid this overhead.
Add some statistics tracking to the hypercall buffer allocations.
The cache size of 4 was chosen based on these statistics since they
indicated that 2 pages was sufficient to satisfy all concurrent single
page hypercall buffer allocations seen during "xl create", "xl
shutdown" and "xl destroy" of both a PV and HVM guest therefore 4
pages should cover the majority of important cases.
This fixes http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1719.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Zheng, Shaohui <shaohui.zheng@intel.com>
Tested-by: Haitao Shan <maillists.shan@gmail.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
It's not clear why a userspace lzma decode would want to use that
particular value, what bearing it has on anything or why it would
assume it could use 1/3 of the total RAM in the system (potentially
quite a large amount of RAM) as opposed to any other limit number.
Instead, hardcode 32Mby.
This reverts 22830:c80960244942, removes the xc_get_physmem/physmem
function entirely, and replaces the expression at the call site with a
fixed constant.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Cc: Christoph Egger <Christoph.Egger@amd.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently, cur_pages (which is used as index into page_array for
fetching gfns) is used to judge whether it is proper here to allocated
1G pages. However, cur_pages == page_array[cur_pages] only holds true
when it is below 4G. When it is above 4G, page_array[cur_pages] -
cur_pages = 256M.
As a result, when guest has 10G memory, 8 1G-pages are allocated. But
only 2 of them have their corresponding gfns 1G aligned. The other 6
are forced to split to 2M pages, as their starting gfns are 4G+256M,
5G+256M .................
Inside the patch, true gfns are used instead of cur_pages to fix this
issue.
Signed-off-by: Shan Haitao <haitao.shan@intel.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
NetBSD doesn't have sysconf(_SC_PHYS_PAGES).
Factor physmem() out into os-dependent files and rename it to
xc_get_physmem() so as not to pollute the namespace.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
there are some new CPUID features that are safe for guests to see, as
they don't require OS awareness (FPU/ALU related instructions only).
Among features for new AMD CPUs there is also the PCLMULQDQ bit, which
Intel CPU have already for quite a while.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
there are some new CPUID bits (and leaves) which Dom0 and PV domains
should not see to avoid trouble, since we don't emulate the features.
The most prominent one is a topology leaf, which contains information
specific to the physical CPU, not the virtual one. To avoid confusion
(and possibly crashes) due to a confused Dom0 scheduler simply disable
these bits.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Keir Fraser <keir@xen.org>
The maximum number of grants is now constrained domain-wide in linux,
so set_max_grants should be a noop there. Previously, this constraint
was per-file-description.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently hypercalls have only 5 arguments, hypercall->arg[0..4]. Do
not try and print arg[5] else:
cc1: warnings being treated as errors
xenctrl_osdep_ENOSYS.c: In function
'ENOSYS_privcmd_hypercall':
xenctrl_osdep_ENOSYS.c:30: error: array subscript is above
array bounds
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
* Creates HVMOPs for setting and getting memory access. The hypercalls
can set individual pages or the default access for new/refreshed
pages.
* Added functions to libxc to access these hypercalls.
Signed-off-by: Joe Epstein <jepstein98@gmail.com>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Tim Deegan <Tim.Deegan@citrix.com>
Attached patch makes libxc build again on NetBSD after the recent rework.
[ Modified by iwj:
I changed the name of the new make variable from LIBDL to DLOPEN_LIBS.
The latter conforms to the naming scheme for similar variables found
in config/*.mk - PTHREAD_LIBS et al.
Also I moved the setting of the variable to -dl from Linux to StdGNU
(which makes it apply more widely) and also added it to SunOS.mk
(based on pure guesswork). ]
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Resolves build error:
/usr/bin/ld: xenctrl_osdep_ENOSYS.o: relocation R_X86_64_32
against `a local symbol' can not be used when making a shared
object; recompile with -fPIC
xenctrl_osdep_ENOSYS.o: could not read symbols: Bad value
collect2: ld returned 1 exit status
Clean up object files correctly too.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
In specific, it fixes the following issues:
1. The sub-leaves of CPUID:0x0000000D aren't contiguous. Hypervisor
shouldn't use register values to stop the enumeration. This patch
moves checking on XSAVE sub-leaves out of if-else statement. It also
bumps up sub-leaves to 63.
2. It creates a common function for xsave.
3. The main leaf 0 of CPUID:0x0000000D in current Xen is broken,
especially ECX and EBX registers. This patch cleans it up.
4. It adds support to detects EBX value of CPUID:0x0000000D main leaf
0 on-the-fly.
Signed-off-by: Wei Huang2 <wei.huang2@amd.com>
This helps ensure that the osdep abstraction is complete by
allowing us to avoid including xc_private.h.
All the other OS backends could benefit from the same treatment but
since I cannot compile test I did not do this.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
Now that this file exists it is a better home for these than xc_misc.c
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
Add a dummy backend which always returns ENOSYS. Mainly as a compile
time testbed rather than because it is a useful backend.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
Transition to xc_osdep_handle is now complete and nothing uses
(or should be using) it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
i.e. not running on a real hypervisor
Allows users of the library to adjust behaviour. I don't especially
like this violation of the abstraction but both oxenstored and xapi
use this to avoid difficult to simulate operations when running on the
simulator.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
do_privcmd() was only ever used by do_xen_hypercall() so remove it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
This patch introduces the basic infrastructure and uses it for open
and close operations on privcmd, evtchn and gnttab devices.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson.citrix.com>
The xc_interface previously passed to xc_gnttab_* was only used for
logging which can now be done via the xc_gnttab handle instead.
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also update QEMU_TAG to pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
This makes the interface consistent with the changes made to the main
interface in 21483:779c0ef9682c.
Also fix some references to "struct xc_interface" which should have
been simply "xc_interface" in tools/xenpaging, and update QEMU_TAG to
pull in the corresponding qemu change.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
They simply make hypercalls and perform other operations via the
abstract interface. Create xc_gnttab.c and move those functions there.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
George Dunlap
KUWAMURA Shin'ya
Ian Jackson
Ian Campbell
Shan Haitao
Christoph Egger
Keir Fraser
Stefano Stabellini
Daniel De Graaf
Liu, Jinsong
Joe Epstein
Olaf Hering