The /local/domain/DOMID/device/vfb/0/backend path is irrelevant.
libxl does not create it, so the branch would never be taken.
Instead, simply read the target paths of interest.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
qemu only sets a password on its vnc display if the value for the -vnc
option has the ",password" modifier. The code for constructing
qemu-dm options was broken and only added this modifier for one of the
cases.
Unfortunately there does not appear to be any code for passing the vnc
password to upstream qemu (ie, in the case where
libxl_build_device_model_args_new is called). To avoid accidentally
running the domain without a password, check for this situation and
fail an assertion. This will have to be revisited after 4.1.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
When using pygrub we have to connect to the console twice: once at the
beginning to connect to pygrub and a second time after creating the pv
console to connect to the guest's console.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The algorithm for printing the CPU affinity in a condensed way
looks for a set bit in a zero-byte:
for (i = 0; !(pcpumap & 1); ++i, pcpumap >>= 1)
Looking at the code I found that it is entirely broken if more than 8
CPUs are used. Beside that endless loop issue the output is totally
bogus except for the "any CPU" case, which is handled explicitly earlier.
I tried to fix it, but the whole approach does not work if the outer
loops actually iterates (executing more than once).
This fix reimplements the whole algorithm in a clean (though not much
optimized way). It survived some unit-testing.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
xend uses rtl8139, and we want xl to be compatible with xm. Some
older operating systems don't have e1000 drivers, and we want widest
compatibility rather than best performance (people who want good
performance are best advised to use PV-on-HVM drivers).
We'll probably switch to a new default when switching to upstream
qemu, in the Xen 4.2 release cycle.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Constantly m(un)locking memory can have significant overhead on
systems with large numbers of CPUs. This was previously fixed by
20841:fbe8f32fa257 but this was dropped during the transition to
hypercall buffers.
Introduce a small cache of single page hypercall buffer allocations
which can be resused to avoid this overhead.
Add some statistics tracking to the hypercall buffer allocations.
The cache size of 4 was chosen based on these statistics since they
indicated that 2 pages was sufficient to satisfy all concurrent single
page hypercall buffer allocations seen during "xl create", "xl
shutdown" and "xl destroy" of both a PV and HVM guest therefore 4
pages should cover the majority of important cases.
This fixes http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1719.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Zheng, Shaohui <shaohui.zheng@intel.com>
Tested-by: Haitao Shan <maillists.shan@gmail.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The Xen build system is not currently compatible with the --as-needed
linker option. The proper fix for this is turning out to be rather
invasive to the build system so simply disable for now with the
intention of revisiting for the 4.2 release.
The --no-as-needed option is available at least since binutils 2.15
(released in May 2004) and hence I think can be unconditionally relied
on.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Nathan March <nathan@gt.net>
Tested-by: Nathan March <nathan@gt.net>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Shared libraries should be executable.
(rpm (4.9.0) doesn't automatically supply a "provides" entry for a
library unless it is executable. Non-executable libraries can cause
other trouble too.)
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Update a comment about NetworkManager not supporting bridging in
Fedora 11 to refer instead to Fedora 14. Clarify the wording.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Fix an anomaly in /etc/xen/scripts/network-route.
Currently this script contains
netdev=${netdev:-eth${vifnum}}
ie. netdev is set to eth${vifnum} by default. Unfortunately vifnum
is not set anywhere in the xen code so the default is actually the
broken "eth". And anyway the vif number (which is what vifnum ought
to be) is not relevant.
The patch changes the default to eth0 (which is what the comment at
the top of the file says it should be).
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Attached patch disables pci_vtd_quirk for 32-bit Xen since 32-bit xen
does not support MMCFG access.
Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Before the creation and population of a new CPU pool we have to clear
the poolid variable, which still contains the value from the previous
iteration.
This fixes the execution of xl cpupool-numa-split on machines with more
than two nodes.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: juergen.gross@ts.fujitsu.com
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Though illegal characters on xl command lines are catched, the user
isn't currently informed which one was not right.
This patch fixes this by printing the faulting character.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
It's not clear why a userspace lzma decode would want to use that
particular value, what bearing it has on anything or why it would
assume it could use 1/3 of the total RAM in the system (potentially
quite a large amount of RAM) as opposed to any other limit number.
Instead, hardcode 32Mby.
This reverts 22830:c80960244942, removes the xc_get_physmem/physmem
function entirely, and replaces the expression at the call site with a
fixed constant.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Cc: Christoph Egger <Christoph.Egger@amd.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl_domain_rename is where domain names are assigned. Therefore
this is where we check that no two domains have the same name. As a
special exception, domains whose names are "" are not considered to
clash.
We also take special care not to mind if we try to rename a domain to
the name it already has.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Previously calling libxl__devices_destroy on a half-constructed or
half-destroyed domain would sometimes complain along these lines:
libxl: error: libxl_device.c:327:libxl__devices_destroy /local/domain/29/device is empty
This is (a) not a reasonable thing to complain about and (b) not an
accurate description of all the things that that particular failure of
libxl__xs_directory might mean.
Change the code to check errno, so that if errno==ENOENT we silently
continue, not destroying any devices, and if errno!=ENOENT, properly
log the problem and fail.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Many of the functions in libxl_xshelp.c simply return 0 on error, and
leave the errno value from xenstore in errno. Document this more
clearly.
Also fix a >75 column line.
No functional change.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl__domain_make makes some assumptions about the way its caller
treats its uint32_t *domid parameter: specifically, if it fails it may
have partially created the domain and it does not every destroy it.
But it does not initialise it. Document this assumption in a comment,
and assert on entry that domid not a guest domain id, to ensure that
the caller has properly initialised it.
Introduce a function libxl_domid_valid_guest to help with this.
This is not intended to produce any practical functional change in
current code.
Secondly, libxl_create_stubdom calls libxl__domain_make and has no
code to tear down the domain again on error. This is complicated to
fix (since it may even be possible for the the domain to be left in a
state where it's not possible to tell that it was going to be a
stubdom for some other domain). So for now simply leave a fixme
comment.
Finally, in 22739:d839631b6048 we introduced "-1" as a sentinel "no
such domain" value for domid. However, domid is a uint32 so testing
it with "if (domid > 0)" as we do in 22740:ce208811f540 is wrong
because it always triggers. Instead use libxl_domid_valid_guest.
This fix means that that if "xl create" fails, it will not try to
destroy the domain "-1". Previously you'd see this message:
libxl: error: libxl.c:697:libxl_domain_destroy non-existant domain -1
whose "-1" many readers may have thought was an error code, but which
is actually supposedly a domain id.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl__domain_make could under some circumstances leak the xenstore
transaction (stored in the variable t). Also, failures to commit the
xenstore transaction for reasons other than EAGAIN would be ignored (!)
Fix this as follows:
* Initialise t to 0 (not a valid transaction id), and when the
transaction is successfully committed or rolled back, reset it.
* Change all the instances of: libxl__free_all(&gc); return error;
to instead do: rc=error; goto out;
* Use the out stanza for exiting, setting rc=0 on success first.
* Explicitly abort the transaction in the out stanza.
Also add a note by the calls manipulating the gc, to note that as this
is an internal function, the gc should really be set up and destroyed
by its caller. But let's not do that at this stage of the 4.1 release
cycle.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
according to the getopt(3) manpage (and to my testing) getopt returns
'?' if an unknown option character is found and stores the insulting
character in optopt.
This patch fixes the broken output in such a situation:
root@dosorca:/data/images# xl vcpu-list -j
option `?' not supported.
Name ID VCPU CPU State Time(s) CPU Affinity
Domain-0 0 0 0 -b- 193.1 any cpu
turns into:
root@dosorca:/data/images# xl vcpu-list -j
option `j' not supported.
Name ID VCPU CPU State Time(s) CPU Affinity
Domain-0 0 0 0 -b- 193.1 any cpu
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The help screen of xl cpupool-list promises to allow a CPU pool to
be named on the command line, which will then be listed only.
Probably caused by a "DeMorgan brain twist" this specific CPU pool
is _omitted_ instead. The patch fixes this, so single CPU pools
can be explicitly listed again.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Although advertised via the usage output, xl cpupool-list -l just
returns ERROR_NI, which does not show up on the console. Instead the
output is empty, which is not exactly what --long hints to. To avoid
confusion remove the line from the help output and just ignore the -l
option properly until it gets finally implemented.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The implementation of xl cpupool-numa-split is broken. It adds nodes
to the wrong pool. This was probably a copy and paste error which
happened when libxl_cpupool_cpuadd_node() was introduced.
Reported-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Running xl create configfile where configfile includes the lines
bootloader = "/usr/bin/pygrub"
disk = [ 'file:/dev/mapper/vg0-partname,xvda1,w' ]
then xl segfaults at the line
ret = strdup(dev);
of libxl_device_disk_local_attach() in tools/libxl/libxl.c . The
problem is that dev is not set if libxl__blktap_enabled(&gc) is false
or if phystype isn't recognized. In the latter case we want to skip
that line and return NULL, but if libxl__blktap_enabled(&gc) is false
we should be returning something, at least in the cases where the
device has a name in the host which we can just refer to.
Also improve the error message when QCOW or QCOW2 are specified, and
avoid using an uninitialised value of "ret".
Signed-off-by: M A Young <m.a.young@durham.ac.uk>
Signed-off-by: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Firstly, if libxl_read_file_contents fails, it doesn't really leave
*data and *datalen_r undefined - it leaves them unchanged. Tighten up
the spec for the benefit of libxl_userdata_retrieve.
Secondly, libxl_userdata_retrieve ignored errors, assuming they were
all ENOENT. Instead it should fail on unexpected errors.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Jim Fehlig <jfehlig@novell.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently, cur_pages (which is used as index into page_array for
fetching gfns) is used to judge whether it is proper here to allocated
1G pages. However, cur_pages == page_array[cur_pages] only holds true
when it is below 4G. When it is above 4G, page_array[cur_pages] -
cur_pages = 256M.
As a result, when guest has 10G memory, 8 1G-pages are allocated. But
only 2 of them have their corresponding gfns 1G aligned. The other 6
are forced to split to 2M pages, as their starting gfns are 4G+256M,
5G+256M .................
Inside the patch, true gfns are used instead of cur_pages to fix this
issue.
Signed-off-by: Shan Haitao <haitao.shan@intel.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
xc_interface_open() was called with improper number of arguments. It
is fixed by this patch.
This appears to have been missed by 21483:779c0ef9682c. The interface
change also included the return type (int->xc_interface *) but that
was already covered in 21483.
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
If you actually set it to a relative path, the qemu build breaks.
So this commented-out rune (an example) should arrange to be absolute.
Unfortunately XEN_ROOT is itself relative so the previous attempt to
fix this (22772:654563af359f) didn't work. So use `pwd`.
Tested-by: M A Young <m.a.young@durham.ac.uk>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
NetBSD doesn't have sysconf(_SC_PHYS_PAGES).
Factor physmem() out into os-dependent files and rename it to
xc_get_physmem() so as not to pollute the namespace.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
there are some new CPUID features that are safe for guests to see, as
they don't require OS awareness (FPU/ALU related instructions only).
Among features for new AMD CPUs there is also the PCLMULQDQ bit, which
Intel CPU have already for quite a while.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Clean up invalidate_iommu_page function. Make it suitable for variable
page sizes and can be reused by invalidate_all_iommu_pages.
Signed-off-by: Wei Wang <wei.wang2@amd.com>
Since in most case, 2 or 3 - level IO page tables are sufficient, this
patch updates page table level for device assignment to reduces
overhead of dma translation
Signed-off-by: Wei Wang <wei.wang2@amd.com>
Originally when detaching a PCI device, pirq_to_emuirq and pirq_to_irq
are freed via hypercall do_physdev_op. Now in function
pt_irq_destroy_bind_vtd, duplicated logic is added to free
pirq_to_emuirq, but not pirq_to_irq. This causes do_physdev_op fail to
free both emuirq and irq. After attaching a PCI device for 32 times,
irq resources run out. This patch removes the redundant logic.
Signed-off-by: Fengzhe Zhang <fengzhe.zhang@intel.com>
Changset 22806:eefb8e971be5 broke 'xl'.
After starting the xenstored, xenconsoled, xenbackendd and running xl
create I get this:
libxl: error: libxl.c:53:libxl_ctx_init Is xenstore daemon running?
failed to stat /var/run/xenstore.pid: No such file or directory
cannot init xl context
The reason for the failure is that the NetBSD startup script
creates the file
/var/run/xenstored.pid
but libxl checks for
/var/run/xenstore.pid
Attached patch makes this consistent across Linux and NetBSD by
changing the Linux name (to the more-conventional food.pid form).
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Do not create the domain if another domain with the same name is already
running.
This is another error-checking function at rather too high a level:
this should be moved into libxl_domain_rename in 4.2.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Ian Jackson
Stefano Stabellini
Stefano Stabellini
Andre Przywara
Allen Kay
Ian Campbell
Michael Young
Juergen Gross
Shan Haitao
Keir Fraser
Daniel Kiper
Christoph Egger
Wei Wang
Fengzhe Zhang
John Weekes