This can greatly improve ssl relocation performance (to about 1/3
compared with buffersize 1024).
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
For now hardcode /etc w/o a prefix as there are hardcoded
config paths in the code which would break otherwise.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
In the case of inactive managed domains:
The following error occurs currently. We cannot change the
configuration of the VBD by using xm block-configure. Of course,
using xm block-detach and xm block-attach instead of xm
block-configure, we can change it. However, I'd like to change it by
using xm block-configure.
In the case of active domains:
Another problem occurs after a domain was rebooted. Even if we
change a configuration of a VBD in the domain by using xm
block-configure, the configuration of the VBD is reverted to previous
configuration after the domain was rebooted.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
APERF/MPERF MSRs provides feedback about actual freq in
eplased time, which could be different from requested freq by
governor. However currently ondemand governor only takes that
feedback at freq down path. We should do that for scale up too.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Current IOAPIC interrupt remapping code assumes there is only one
IOAPIC in system. It brings problem when there are more than one
IOAPIC in system. This patch extends ioapic_pin_to_intremap_index[]
array to handle multiple IOAPICs case.
Signed-off-by: Weidong Han <weidong.han@intel.com>
For timer_deadline == 0 or timer_deadline - now > largest u32
case, the expected_us (in u32 type) may become wrong.
Add a tunable option to ease conditional adjustment.
Signed-off-by: Wei Gang <gang.wei@intel.com>
Linux started to pass around pointers to 'const cpumask_t' a while ago,
and passing such a pointer to set_xen_guest_handle() requires that the
field be a handle for a constant type in order to avoid compiler
warnings.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
When a PCI function is passed-through extra options may be passed
through.
In the case of boot-time PCI pass-through the documented format is:
[dom:]bus:dev.slot[@vslot][[,opt]...]
e.g.
00:01.00.1@7,msitranslate=3D1
In the case of PCI hot-plug the xm pci-attach command take the
following arguments:
[-o opt[,opt]...] [dom:]bus:dev.slot [vslot]
e.g.
-o msitranslate=3D1 00:01.00.1 7
These xm ends up passing these to xem-qemu as:
[dom:]bus:dev.slot[[,opt]...][@vslot]
e.g.
00:01.00.1,msitranslate=3D1@7
Note that the option and the vslot have are transposed when
compared to the format used by boot-time PCI pass-through.
The parser inside qemu-xen can only handle the format used by
boot-time PCI pass-through and because of this ignores
any options passed by hot-plug.
This patch alters format used by hot-plug to match the parser.
Signed-off-by: Simon Horman <horms@verge.net.au>
We change all invocations of setup.py as follows:
* use $(PYTHON) instead of `python' so that the user can specify
an alternative python version if they need to. If not set it
defaults to `python' in Config.mk.
* pass --prefix=$(PREFIX) via a new make variable
$(PYTHON_PREFIX_ARG). This allows a user to suppress the
--prefix=... argument entirely by setting PYTHON_PREFIX_ARG=''.
This will work around the bug described here
https://bugs.launchpad.net/ubuntu/+bug/362570
where passing --prefix=/usr/local (which ought to have no effect as
/usr/local is the default prefix) changes which subdirectory
distutils chooses, and results in the files being installed in
site-packages which is not on the default search path.
Users not affected by this python packaging bug should not set
PYTHON_PREFIX_ARG and their builds will not be affected. (Provided
PREFIX did not contain spaces. People who put spaces in PREFIX are
being quite optimistic.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
After the scheduler timer became suspended before entering cpu idle
state, the percpu timer_deadline is possible to be 0, i.e. no soft
timer in the queue. This case will cause unexpected large residency
percentage in C1 for the purely idle cpu.
Signed-off-by: Wei Gang <gang.wei@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
[no-]e820-mtrr-clip: Clip e820 RAM areas to top-of-memory according
to MTRRs. Prefix no- to disable the clip.
e820-verbose: Extra e820 info printed during boot.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
op_pincpu method in SrvDomain.py does not currently work because
op_pincpu method gives string objects to a cpumap argument of
domain_pincpu method in XendDomain.py though the cpumap argument
expects list objects.
This patch solves the above problem as follows.
op_pincpu method gives string objects to the cpumap argument as is,
because op_pincpu method cannot give list objects to the cpumap
argument.
Instead, domain_pincpu method expects that the cpumap argument is
string objects, then domain_pincpu method converts the cpumap
argument into list objects.
Also, the patch modifies two methods (except for op_pincpu method)
calling domain_pincpu method. The methods give string objects to
the cpumap argument instead of list objects.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
cacheable (WB) by MTRRs. Fix up by truncating the memory map.
This fixes performance issues on certain systems.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
When guest OS shutdowns or a device is hotremoved.
1. Xend resets devices.
2. Xend deassigns devices.
Because if devices are deassigned before the reset, dom0 memory may be
overwritten by DMA.
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Network support is still provided the same way: using the tap
interface, created in qemu using netfront.
The lwip stack is still available to avoid additional compilation
issues.
However the stubdom is not going to have its own vif anymore,
this means that the only vnc server supported is the one in dom0.
You can still enable the vnc server in a stubdom at compile time, if
you want so.
Probably the most important change caused by this patch to xen users
is that you don't have to specify two vif in the stubdom config file
anymore, but just one:
-vif = [ '', 'ip=10.0.1.1,mac=aa:00:00:12:23:34']
+vif = ['ip=10.0.1.1,mac=aa:00:00:12:23:34']
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Prior to changset 19510:5c69f98c348e - 'xm, xend: Replace "vslt" with
"vslot"', both vslt and vslot were used in the xm code, often fairly
arbitrarily.
However, in the dictionary that describes a pci function both vslt and
vslot were present. vslt stored the slot assigned to the function. And
vslot stored the slot the user requested for the function, or
AUTO_PHP_SLOT if no slot was requested.
With the renaming these two values got merged into a single entry.
This patch un-merges them by renaming the what was vslot to
requested_vslot.
So an out of chronological order list of name changes is:
'vslot' -> 'requested_vslot'
'vslt' -> 'vslot'
Signed-off-by: Simon Horman <horms@verge.net.au>
Display and xauthority vars are read from vmConfig['platform'] first,
then they are read again from dev_info.
However if the user does not set those variable in the config file,
dev_info won't contain them, hence we are going to overwrite the
current significant values with null.
This patch fixes the problem setting display and xauthority to the
current values if dev_info does not contain them.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch removes the need for a second configuration file for
stubdoms: it is going to be automatically generated by the script
stubdom-dm using command line options and xenstore to find any needed
information.
The configuration script will be placed under /etc/xen/stubdoms and
automatically removed when the domain is destroyed.
The only change needed in xend is not to write on xenstore sdl,
opengl and serial command line options for qemu, because stubdoms do
not support them.
It is safe to remove those two options from xenstore because qemu does
not use xenstore to read commans line options.
Finally this patch fixes blkfront disconnections from backends and
display and xauthority variables for pv guests.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
If ${netdev} is bonding, brctl addif ${bridge} ${pdev} fails:
can't add ${pdev} to bridge ${bridge}: Invalid argument
Because ${pdev} has no slaves at this point.=20
# Notice that ifdown ${netdev} clears slaves of ${netdev}.
This patch restores slaves before add_to_bridge2 ${bridge} ${pdev}.
Signed-off-by: KUWAMURA Shin'ya <kuwa@jp.fujitsu.com>
Keir Fraser