We need to make sure that last_vcpu is not pointing to VCPU whose
VPMU is being destroyed. Otherwise we may try to dereference it in
the future, when VCPU is gone.
We have to do this via IPI since otherwise there is a (somewheat
theoretical) chance that between test and subsequent clearing
of last_vcpu the remote processor (i.e. vpmu->last_pcpu) might do
both vpmu_load() and then vpmu_save() for another VCPU. The former
will clear last_vcpu and the latter will set it to something else.
Performing this operation via IPI will guarantee that nothing can
happen on the remote processor between testing and clearing of
last_vcpu.
We should also check for VPMU_CONTEXT_ALLOCATED in vpmu_destroy() to
avoid unnecessary percpu tests and arch-specific destroy ops. Thus
checks in AMD and Intel routines are no longer needed.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
master commit: ed80171556
master date: 2015-01-07 11:12:27 +0100
Commit 545607eb3c ("x86: fix various issues with handling guest IRQs")
wasn't really consistent in one respect: The granting of access to an
IRQ shouldn't assume the pIRQ->IRQ translation to be the same in both
domains. In fact it is wrong to assume that a translation is already/
still in place at the time access is being granted/revoked.
What is wanted is to translate the incoming pIRQ to an IRQ for
the invoking domain (as the pIRQ is the only notion the invoking
domain has of the IRQ), and grant the subject domain access to
the resulting IRQ.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
master commit: 6fb3a07bc0
master date: 2015-01-05 10:20:24 -0500
With changeset 22885 support was added for setting the MTU in the vif-bridge
script for when a vif interface was set to 'online'. The was not done for the
'add' operation. The 'add' operation was added to the script for when tap
devices were specified (c/s 21944). With the setting of the MTU for the
'online' case was there a reason for omitting the 'add'?
This patch sets the MTU for both 'online' and 'add' in the vif-bridge script.
Backport for Xen version 4.3.
[ Removed spurious addition of blank line.
Backport of f3f5f1927f (as it is in staging-4.4). -iwj ]
Signed-off-by: Charles Arnold <carnold@suse.com>
libxl__device_disk_local_initiate_attach is assigning dls->diskpath with a
strdup of the device path. This is then passed to the callback, e.g.
parse_bootloader_result but bootloader_cleanup will not free it.
Since the callback is within the scope of the (e)gc and therefore doesn't need
to be malloc'd, a gc'd alloc will do. All other assignments to this field use
the gc.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=767295
Reported-by: Gedalya <gedalya@gedalya.net>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 379b351889)
Valgrind reports:
==7971== Invalid read of size 1
==7971== at 0x40877BE: libxl__parse_mac (libxl_internal.c:288)
==7971== by 0x405C5F8: libxl__device_nic_from_xs_be (libxl.c:3405)
==7971== by 0x4065542: libxl__append_nic_list_of_type (libxl.c:3484)
==7971== by 0x4065542: libxl_device_nic_list (libxl.c:3504)
==7971== by 0x406F561: libxl_retrieve_domain_configuration (libxl.c:6661)
==7971== by 0x805671C: reload_domain_config (xl_cmdimpl.c:2037)
==7971== by 0x8057F30: handle_domain_death (xl_cmdimpl.c:2116)
==7971== by 0x8057F30: create_domain (xl_cmdimpl.c:2580)
==7971== by 0x805B4B2: main_create (xl_cmdimpl.c:4652)
==7971== by 0x804EAB2: main (xl.c:378)
This is because on the final iteration the tok += 3 skips over the terminating
NUL to the next byte, and then *tok reads it. Fix this by using endptr as the
iterator.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Don Slutz <dslutz@verizon.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 5a430eca0b)
On a Thinkpad T4440p with OpenSUSE tumbleweed with v3.15-rc4
and today's latest xen tip from the git tree strace -f reveals
we end up on a never ending wait shortly after
write(20, "backend/console/5\0", 18 <unfinished ...>
This is right before we just wait on the qemu process which we
had mmap'd for. Without this you'll end up getting stuck on a
loop if mmap() worked but madvise() did not. While at it I noticed
even the mmap() error fail was not being checked, fix that too.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit e86539a388)
hvm_domain_relinquish_resources() can free certain domain resources
which can still be accessed, e.g. by HVMOP_set_param, while the domain
is being cleaned up.
Signed-off-by: Mihai Donțu <mdontu@bitdefender.com>
Tested-by: Răzvan Cojocaru <rcojocaru@bitdefender.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This is CVE-2015-0361 / XSA-116.
This extends commit 5283b310 ("x86/HVM: only kill guest when unknown VM
exit occurred in guest kernel mode") to a few more cases, including the
failed VM entry one that XSA-110 was needed to be issued for.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
x86/HVM: prevent infinite VM entry retries
This reverts the VMX side of commit 28b4baac ("x86/HVM: don't crash
guest upon problems occurring in user mode") and gets SVM in line with
the resulting VMX behavior. This is because Andrew validly says
"A failed vmentry is overwhelmingly likely to be caused by corrupt
VMC[SB] state. As a result, injecting a fault and retrying the the
vmentry is likely to fail in the same way."
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Tim Deegan <tim@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 28b4baacd5
master date: 2014-11-25 10:08:57 +0100
master commit: 04ae2f6837
master date: 2014-12-02 12:48:01 +0100
Commit 4ca6f9f0 ("x86/cpuidle: publish new states only after fully
initializing them") resulted in the state counter to be incremented
for C1 despite that using a fixed table entry (and the statically
initialized counter value already accounting for it and C0).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
master commit: 0aabd10525
master date: 2014-11-25 10:05:29 +0100
The specification is kind of vague under what conditions
ExitBootServices() may legitimately fail, requiring the OS loader to
retry:
"If MapKey value is incorrect, ExitBootServices() returns
EFI_INVALID_PARAMETER and GetMemoryMap() with ExitBootServices() must
be called again. Firmware implementation may choose to do a partial
shutdown of the boot services during the first call to
ExitBootServices(). EFI OS loader should not make calls to any boot
service function other then GetMemoryMap() after the first call to
ExitBootServices()."
While our code guarantees the map key to be valid, there are systems
where a firmware internal notification sent while processing
ExitBootServices() reportedly results in changes to the memory map.
In that case, make a best effort second try: Avoid any boot service
calls other than the two named above, with the possible exception of
error paths. Those aren't a problem, since if we end up needing to
retry, we're hosed when something goes wrong as much as if we didn't
make the retry attempt.
For x86, a minimal adjustment to efi_arch_process_memory_map() is
needed for it to cope with potentially being called a second time.
For arm64, while efi_process_memory_map_bootinfo() is easy to verify
that it can safely be called more than once without violating spec
constraints, it's not so obvious for fdt_add_uefi_nodes(), hence a
step by step approach:
- deletion of memory nodes and memory reserve map entries: the 2nd pass
shouldn't find any as the 1st one deleted them all,
- a "chosen" node should be found as it got added in the 1st pass,
- the various "linux,uefi-*" nodes all got added during the 1st pass
and hence only their contents may get updated.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roy Franz <roy.franz@linaro.org>
master commit: 0540b854f6
master date: 2014-11-17 15:07:03 +0100
Having these point into space not controlled by the hypervisor provides
an unnecessary attack surface. Allow architectures to override them and
utilize that override to make them non-canonical addresses (thus
causing #GP rather than #PF when dereferenced).
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 404227138e
master date: 2014-11-17 15:05:53 +0100
Commit bac6334b51 (move domain to
cpupool0 before destroying it) introduced an error in the accounting
of cpupools regarding the number of domains. The number of domains
is nor adjusted when a domain is moved to cpupool0 in kill_domain().
Correct this by introducing a cpupool function doing the move
instead of open coding it by calling sched_move_domain().
Reported-by: Dietmar Hahn <dietmar.hahn@ts.fujitsu.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Dietmar Hahn <dietmar.hahn@ts.fujitsu.com>
Reviewed-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
master commit: 934e7baa6c
master date: 2014-11-12 12:39:58 +0100
This is to improve fairness: A permanent flow of read acquires can
otherwise lock out eventual writers indefinitely.
This is CVE-2014-9065 / XSA-114.
Signed-off-by: Keir Fraser <keir@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 2a549b9c8a
master date: 2014-12-08 14:45:46 +0100
While it is generally wrong to cross region boundaries when dealing
with MMIO accesses of repeated string instructions (currently only
MOVS) as that would do things a guest doesn't expect (leaving aside
that none of these regions would normally be accessed with repeated
string instructions in the first place), this is even more of a problem
for all virtual MSI-X page accesses (both msixtbl_{read,write}() can be
made dereference NULL "entry" pointers this way) as well as undersized
(1- or 2-byte) LAPIC writes (causing vlapic_read_aligned() to access
space beyond the one memory page set up for holding LAPIC register
values).
Since those functions validly assume to be called only with addresses
their respective checking functions indicated to be okay, it is generic
code that needs to be fixed to clip the repetition count.
To be on the safe side (and consistent), also do the same for buffered
I/O intercepts, even if their only client (stdvga) doesn't put the
hypervisor at risk (i.e. "only" guest misbehavior would result).
This is CVE-2014-8867 / XSA-112.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
HVM/PVH guests can otherwise trigger the final BUG_ON() in that
function by entering 64-bit mode, setting the high halves of affected
registers to non-zero values, leaving 64-bit mode, and issuing a
hypercall that might get preempted and hence become subject to
continuation argument translation (HYPERVISOR_memory_op being the only
one possible for HVM, PVH also having the option of using
HYPERVISOR_mmuext_op). This issue got introduced when HVM code was
switched to use compat_memory_op() - neither that nor
hypercall_xlat_continuation() were originally intended to be used by
other than PV guests (which can't enter 64-bit mode and hence have no
way to alter the high halves of 64-bit registers).
This is CVE-2014-8866 / XSA-111.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Any domain which can pass the XSM check against a translated guest can cause a
page reference to be leaked.
While shuffling the order of checks, drop the quite-pointless MEM_LOG(). This
brings the check in line with similar checks in the vicinity.
Discovered while reviewing the XSA-109/110 followup series.
This is XSA-113.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Privilege level checks were basically missing for the CS case, the
only check that was done (RPL == DPL for nonconforming segments)
was solely covering a single special case (return to non-conforming
segment).
Additionally in long mode the L bit set requires the D bit to be clear,
as was recently pointed out for KVM by Nadav Amit
<namit@cs.technion.ac.il>.
Finally we also need to force the loaded selector's RPL to CPL (at
least as long as lret/retf emulation doesn't support privilege level
changes).
This is CVE-2014-8595 / XSA-110.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
master commit: 1d68c1a70e
master date: 2014-11-18 14:16:23 +0100
paging_write_guest_entry() and paging_cmpxchg_guest_entry() aren't
consistently supported for non-PV guests (they'd deref NULL for PVH or
non-HAP HVM ones). Don't allow respective MMU_* operations on the
page tables of such domains.
This is CVE-2014-8594 / XSA-109.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
master commit: e4292c5aac
master date: 2014-11-18 14:15:21 +0100
A recent KVM change by Nadav Amit <namit@cs.technion.ac.il> pointed out
that unconditional VM exits (like VMX'es ones for the INVEPT, INVVPID,
and XSETBV instructions) may result from guest user mode activity (in
the example cases, e.g. prior to a privilege level check being done).
Consequently convert the unconditional domain_crash() to a conditional
one (when guest is in kernel mode) with the alternative of injecting
#UD (when in user mode).
This is meant to be a precaution against in-guest security issues
introduced when any such VM exit becomes possible (on newer hardware)
without the hypervisor immediately being aware of it. There are no such
unhandled VM exits currently (and hence this is not an active security
issue), but old (no longer security maintained) versions exhibit issues
in the cases given as examples above.
Suggested-by: Tim Deegan <tim@xen.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
master commit: 5283b310e1
master date: 2014-10-31 11:32:27 +0100
Process softirqs once per domain, and once every 64 vcpus in a guest to avoid
being hit by the NMI watchdog. Discovered against a VM which had accidentally
been assigned 8192 vcpus.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
master commit: 9cf71226ed
master date: 2014-10-31 11:28:36 +0100
Xen 4.3.0, 4.2.3 and older transferred a maximum sized xsave area (as
if all the available XCR0 bits were set); the new version only
transfers based on the actual XCR0 bits. This may result in a smaller
area if the last sections were missing (e.g., the LWP area from an AMD
machine). If the size doesn't match the XCR0 derived size, the size is
checked against the maximum size and the part of the xsave area
between the actual and maximum used size is checked for zero data. If
either the max size check or any part of the overflow area is
non-zero, we return with an error.
Signed-off-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: d7bb8e88a0
master date: 2014-10-27 16:45:09 +0100
On certain systems some of the memory map entries designated for use by
runtime services cannot be mapped (frequently due to firmware bugs). On
others, some of the memory map entries aren't even marked for runtime
services use, yet are being used by them. For both cases give people a
way to suppress use of runtime services altogether.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 5680244040
master date: 2014-10-27 16:43:52 +0100
In the event of a #PF while in an EFI runtime service function we
otherwise can't dump the page tables, making the analysis of the
problem more cumbersome.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: e65436ba36
master date: 2014-10-27 16:43:12 +0100
In the case that Xen is attempting to load a zeroextended HVM record where the
difference needing extending would overflow the data blob, _hvm_check_entry()
will incorrectly fail before working out that it would have been safe.
The "len + sizeof(*d)" check is wrong. Consider zeroextending a 16 byte
record into a 32 byte structure. "32 + hdr" will fail the overall context
length check even though the pre-extended record in the stream is 16 bytes.
The first condition is reduced to just a length check for hvm save header,
while the second condition is extended to include a check that the record in
the stream not exceeding the stream length.
The error messages are extended to include further useful information.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Paul Durrant <Paul.Durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 66d0c0aa1f
master date: 2014-10-27 16:41:50 +0100
This patch fixes two issues:
1. Interrupts on PIR are lost during save/restore. Syncing the PIR
into IRR during save will fix it.
2. EOI exit bitmap doesn't set up correctly after restore. Here we
will construct the eoi exit bitmap via (IRR | ISR). Though it may cause
unnecessary eoi exit of the interrupts that pending in IRR or ISR during
save/restore, each pending interrupt only causes one vmexit. The
subsequent interrupts will adjust the eoi exit bitmap correctly. So
the performance hurt can be ignored.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 607e8494c4
master date: 2014-10-27 16:40:18 +0100
On a system which looks like this:
[root@st04 ~]# xl list
Name ID Mem VCPUs State Time(s)
Domain-0 0 752 4 r----- 46699.3
(null) 1 0 0 --p--- 0.0
(null) 2 0 0 --p--- 0.0
(null) 3 0 0 --p--- 0.0
badger 25 0 1 --p--- 0.0
`xl vcpu-list` failes as so:
[root@st04 ~]# xl vcpu-list
Name ID VCPU CPU State Time(s) CPU Affinity
Domain-0 0 0 0 -b- 12171.0 all
Domain-0 0 1 1 -b- 11779.6 all
Domain-0 0 2 2 -b- 11599.0 all
Domain-0 0 3 3 r-- 11007.0 all
libxl: critical: libxl__calloc: libxl: FATAL ERROR: memory allocation failure (libxl__calloc, 4294935299 x 40)
: Cannot allocate memory
libxl: FATAL ERROR: memory allocation failure (libxl__calloc, 4294935299 x 40)
The root cause of this is in Xen. getdomaininfo() has no way of expressing
"this domain has no vcpus". Previously, info->max_vcpu_id would be returned
uninitialised in such a case.
Unfortunately, setting it to 0 as a default is not appropriate. A max_vcpu_id
of 0 and nr_online_cpus of 0 is the valid state for a single vcpu domain which
is in the process of being destroyed.
As all components are required to add 1 to max_vcpu_id to get the number of
vcpus, an id of ~0U is not valid to be used. Explicitly define this as an
invalid max vcpu value, and use it to express "no vcpus" in getdomaininfo()
In libxl, the issue is seen as libxl_list_vcpu() attempts to use the
uninitialised domaininfo.max_vcpu_id for memory allocation.
Check domaininfo.max_vcpu_id against the new sentinel value
XEN_INVALID_MAX_VCPU_ID, and return early. This means that it is now valid
for libxl_list_vcpu() to return NULL for a domain which lacks any vcpus.
As part of this change, remove the pointless call to libxl_get_max_cpus(),
whose returned value is unconditionally clobbered in the for() loop.
Reported-by: Euan Harris <euan.harris@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Don Slutz <dslutz@verizon.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
tools/libxl: Fix libxl_list_vcpu() following c/s 93e52d52
My reasoning regarding nr_cpus_out was wrong, as I had confused nr_cpus_out
with nr_vcpus_out.
Dario pointed this out, but the patch (having gained appropriate acks) got
committed before I could post a correction.
Noticed-by: Dario Faggioli <dario.faggioli@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
master commit: 93e52d5242
master date: 2014-10-23 10:19:53 +0200
master commit: c90a755f26
master date: 2014-10-23 12:29:00 +0100
Both the freeing and the inspection of the bitmap get done in (nested)
loops which - besides having a rather high iteration count in general,
albeit that would be covered by XSA-77 - have the number of non-trivial
iterations they need to perform (indirectly) controllable by both the
guest they are for and any domain controlling the guest (including the
one running qemu for it).
Note that the tying of the continuations to the invoking domain (which
previously [wrongly] used the invoking vCPU instead) implies that the
tools requesting such operations have to make sure they don't issue
multiple similar operations in parallel.
Note further that this breaks supervisor-mode kernel assumptions in
hypercall_create_continuation() (where regs->eip gets rewound to the
current hypercall stub beginning), but otoh
hypercall_cancel_continuation() doesn't work in that mode either.
Perhaps time to rip out all the remains of that feature?
This is part of CVE-2014-5146 / XSA-97.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 070493dfd2
master date: 2014-10-06 11:22:04 +0200
AMD Guest IOMMU support was added to allow correct use of PASID and PRI
hardware support with an ATS-aware guest driver.
However, support cannot possibly function as guest_iommu_set_base() has no
callers. This means that its MMIO region's P2M pages are not set to
p2m_mmio_dm, preventing any invocation of the MMIO read/write handlers.
c/s fd186384 "x86/HVM: extend LAPIC shortcuts around P2M lookups" introduces a
path (via hvm_mmio_internal()) where iommu_mmio_handler claims its MMIO range,
and causes __hvm_copy() to fail with HVMCOPY_bad_gfn_to_mfn.
iommu->mmio_base defaults to 0, with a range of 8 pages, and is unilaterally
enabled in any HVM guests when the host IOMMU(s) supports any extended
features.
Unfortunately, HVMLoader's AP boot trampoline executes an `lmsw` instruction
at linear address 0x100c which unconditionally requires emulation. The
instruction fetch in turn fails as __hvm_copy() fails with
HVMCOPY_bad_gfn_to_mfn.
The result is that multi-vcpu HVM guests do not work on newer AMD hardware, if
IOMMU support is enabled in the BIOS.
Change the default mmio_base address to ~0ULL. This prevents
guest_iommu_mmio_range() from actually claiming any physical range
whatsoever, which allows the emulation of `lmsw` to succeed.
Reported-by: Roberto Luongo <rluongo@ready.it>
Suggested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Roberto Luongo <rluongo@ready.it>
Acked-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
master commit: 02e4c89b2c
master date: 2014-10-06 11:20:12 +0200
Just like for LAPIC, IO-APIC, MSI, and HT we shouldn't be granting Dom0
access to these. This implicitly results in these pages also getting
marked reserved in the machine memory map Dom0 uses to determine the
ranges where PCI devices can have their MMIO ranges placed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
master commit: fdf30377fb
master date: 2014-10-06 11:15:01 +0200
Commit d1222afda4 ("x86: allow Dom0 read-only access to IO-APICs") had
an unintended side effect: By no longer adding IO-APIC pages to Dom0's
iomem_caps these also no longer get reported as reserved in the machine
memory map presented to it (which got added there intentionally by
commit b8a456caed ["x86: improve reporting through
XENMEM_machine_memory_map"] because many BIOSes fail to add these).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
master commit: 9d8edc5a8b
master date: 2014-10-06 11:13:19 +0200
The only valid response from the LocateHandle() call is EFI_BUFFER_TOO_SMALL,
so exit if we get anything else. We pass a 0 size/NULL pointer buffer, so the
only other returns we will get is an error. Return right away as there is
nothing to do. Also return if there is an error allocating the buffer, as the
previous code path also allowed for an undefined pointer to be freed.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Re-structure the change.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: c61690fb76
master date: 2014-09-24 11:09:11 +0200
These should be re-enabled in particular when the virtualized APIC
transitions to HW-disabled state.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
master commit: 72af6f455a
master date: 2014-09-16 13:58:20 +0200
... since the documentation is explicit that CLFLUSH is only ordered
with respect to MFENCE.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: 48d32458bc
master date: 2014-09-09 18:09:08 +0200
The previous shortcut was wrong, as it bypassed the necessary vmwrite:
All we really want to avoid if the guest writes zero is to add the MSR
to the host-load list.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
master commit: dfa625e15f
master date: 2014-08-22 14:29:37 +0200
This extends commit d6cb14b34f ("VT-d: suppress UR signaling for
desktop chipsets") as per the finally obtained list of affected
chipsets from Intel.
Also pad the IDs we had listed there before to full 4 hex digits.
This is CVE-2013-3495 / XSA-59.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Yang Zhang <yang.z.zhang@intel.com>
master commit: 3e2331d271
master date: 2014-09-18 15:03:22 +0200
Xen cannot safely use any ATS functionality until it gains asynchronous queued
invalidation support, because of the current synchronous wait for completion.
Do not turn ATS on by default.
While editing the default in the command line documentation, correct the
statement regarding PCI Passthrough. ATS is purely a performance
optimisation, and is certainly not required for PCI Passthrough to function.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
master commit: ad6eddb742
master date: 2014-08-28 16:05:10 +0200
While the write path change appears to be purely cosmetic (but still
gets done here for consistency), the read side mistake permitted
accesses beyond the virtual APIC page.
Note that while this isn't fully in line with the specification
(digesting MSRs 0x800-0xBFF for the x2APIC), this is the minimal
possible fix addressing the security issue and getting x2APIC related
code into a consistent shape (elsewhere a 256 rather than 1024 wide
window is being used too). This will be dealt with subsequently.
This is CVE-2014-7188 / XSA-108.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: 61fdda7acf
master date: 2014-10-01 14:54:47 +0200
Protected mode emulation currently lacks proper privilege checking of
the referenced IDT entry, and there's currently no legitimate way for
any of the respective instructions to reach the emulator when the guest
is in protected mode.
This is XSA-106.
Reported-by: Andrei LUTAS <vlutas@bitdefender.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
master commit: 346d454556
master date: 2014-09-23 14:33:50 +0200
d->arch.hvm_domain.dirty_vram must be read with the domain's paging lock held.
If not, two concurrent hypercalls could both end up attempting to free
dirty_vram (the second of which will free a wild pointer), or both end up
allocating a new dirty_vram structure (the first of which will be leaked).
This is XSA-104.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
master commit: 46a49b91f1
master date: 2014-09-23 14:31:47 +0200
The two MMX/SSE/AVX code blocks failed to update IP properly, and these
as well as get_reg_refix(), which "manually" updated IP so far, failed
to do the TF and RF processing needed at the end of successfully
emulated instructions.
Fix the test utility at once to check IP is properly getting updated,
and while at it macroize the respective code quite a bit, hopefully
making it easier to add further tests when the need arises.
Reported-by: Andrei LUTAS <vlutas@bitdefender.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Reviewed-by: Andrew Cooper <andrew.cooper@citrix.com>
master commit: 3af450fd2d
master date: 2014-08-08 09:34:03 +0200
This reverts commit b497ecca35.
This fix has been discovered to cause regressions. Investigations are
ongoing.
Revert-reqeuested-by: Jan Beulich <JBeulich@suse.com>
If IA32_MISC_ENABLE[22] is set by the BIOS, CPUID.0.EAX will be limited to 3.
Lift this limit before considering whether to query CPUID.7[ECX=0].EBX for
features.
Without this change, dom0 is able to see this feature leaf (as the limit was
subsequently lifted), and will set features appropriately in HVM domain cpuid
policies.
The specific bug XenServer observed was the advertisement of the FSGSBASE
feature, but an inability to set CR4.FSGSBASE as Xen considered the bit to be
reserved as cpu_has_fsgsbase incorrectly evaluated as false.
This is a regression introduced by c/s 44e24f8567 "x86: don't call
generic_identify() redundantly" where the redundant call actually resampled
CPUID.7[ECX=0] properly to obtain the feature flags.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: a1ac4cf52e
master date: 2014-07-29 17:02:25 +0200
Both the freeing and the inspection of the bitmap get done in (nested)
loops which - besides having a rather high iteration count in general,
albeit that would be covered by XSA-77 - have the number of non-trivial
iterations they need to perform (indirectly) controllable by both the
guest they are for and any domain controlling the guest (including the
one running qemu for it).
This is CVE-2014-5146 / XSA-97.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
master commit: 95e6d82224
master date: 2014-08-12 15:30:11 +0200
Boris Ostrovsky
Jan Beulich
Julien Grall
Charles Arnold
Ian Campbell
Luis R. Rodriguez
Mihai Donțu
Juergen Gross
Keir Fraser
Andrew Cooper
Don Koch
Yang Zhang
Roy Franz
H. Peter Anvin
Ian Jackson