The aim being to have as few indirect calls as possible (see [1]),
whereas during initial conversion performance was the main aspect and
hence rarely used hooks didn't get converted. Apparently one use of
get_interrupt_shadow() was missed at the time.
While doing this, drop NULL checks ahead of CPU management and .nhvm_*()
calls when the hook is always present. Also convert the
.nhvm_vcpu_reset() call to alternative_vcall(), as the return value is
unused and the caller has currently no way of propagating it.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tamas K Lengyel <tamas@tklengyel.com>
[1] https://lists.xen.org/archives/html/xen-devel/2021-11/msg01822.html
Prior to 19427e439e ("build: generate "include/xen/compile.h" with
if_changed") running "make install-xen" as root would not have printed
the banner under normal circumstances. Its printing would instead have
indicated that something was wrong (or during a normal build the lack
of printing would do so).
Further aforementioned change had another undesirable effect, which I
didn't notice during review: Originally compile.h would have been
re-generated (and final binaries re-linked) when its dependencies were
updated after an earlier build. This is no longer the case now, which
means that if some other file also was updated, then the re-build done
during "make install-xen" would happen with a stale compile.h (as its
updating is suppressed in this case).
Restore the earlier behavior for both aspects.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This is a fastpath on virtual vmentry/exit, and forcing guest_pat to be
spilled to the stack is bad. Performing the shift in a register is far more
efficient.
Drop the (IMO useless) log message. MSR_PAT only gets altered on boot, and a
bad value will be entirely evident in the ensuing #GP backtrace.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Most functions in this call chain have 8 parameters, meaning that the final
two booleans are spilled to the stack for calls.
First, delete nestedhap_walk_L1_p2m and introduce nhvm_hap_walk_L1_p2m() as a
thin wrapper around hvm_funcs, just like all the other nhvm_*() hooks. This
involves including xen/mm.h as the forward declaration of struct npfec is no
longer enough.
Next, replace the triple of booleans with struct npfec, which contains the
same information in the bottom 3 bits.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The sole caller doesn't check the return value, and both vendors implement the
hook.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
commit 0fdb48ffe7 "libxl: Make sure devices added by pci-attach are
reflected in the config" broken PCI hotplug (xl pci-attach) for PV
domains when it moved libxl__create_pci_backend() later in the function.
This also broke HVM + stubdom PCI passthrough coldplug. For that, the
PCI devices are hotplugged to a running PV stubdom, and then the QEMU
QMP device_add commands are made to QEMU inside the stubdom.
A running PV domain calls libxl__wait_for_backend(). With the current
placement of libxl__create_pci_backend(), the path does not exist and
the call immediately fails:
libxl: error: libxl_device.c:1388:libxl__wait_for_backend: Backend /local/domain/0/backend/pci/43/0 does not exist
libxl: error: libxl_pci.c:1764:device_pci_add_done: Domain 42:libxl__device_pci_add failed for PCI device 0:2:0.0 (rc -3)
libxl: error: libxl_create.c:1857:domcreate_attach_devices: Domain 42:unable to add pci devices
The wait is only relevant when:
1) The domain is PV
2) The domain is running
3) The backend is already present
This is because:
1) xen-pcifront is only used for PV. It does not load for HVM domains
where QEMU is used.
2) If the domain is not running (starting), then the frontend state will
be Initialising. xen-pciback waits for the frontend to transition to
at Initialised before attempting to connect. So a wait for a
non-running domain is not applicable as the backend will not
transition to Connected.
3) For presence, num_devs is already used to determine if the backend
needs to be created. Re-use num_devs to determine if the backend
wait is necessary. The wait is necessary to avoid racing with
another PCI attachment reconfiguring the front/back or changing to
some other state like closing. If we are creating the backend, then
we don't have to worry about the state since it is being created.
Fixes: 0fdb48ffe7 ("libxl: Make sure devices added by pci-attach are
reflected in the config")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Macros with arguments need to be invoked via $(call ...); don't misguide
people looking up usage of such macros.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
While the problem report was for extreme errors, even smaller ones would
better be avoided: The calculated period to run calibration loops over
can (and usually will) be shorter than the actual time elapsed between
first and last platform timer and TSC reads. Adjust values returned from
the init functions accordingly.
On a Skylake system I've tested this on accuracy (using HPET) went from
detecting in some cases more than 220kHz too high a value to about
±2kHz. On other systems (or on this system, but with PMTMR) the original
error range was much smaller, with less (in some cases only very little)
improvement.
Reported-by: James Dingwall <james-xen@dingwall.me.uk>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Looping until reaching/exceeding a certain value is error prone: If the
target value is close enough to the wrapping point, the loop may not
terminate at all. Switch to using delta values, which then allows to
fold the two loops each into just one.
Fixes: 9334029780 ("x86/time: calibrate TSC against platform timer")
Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
struct xenevtchn_handle is common in private.h, meaning that xenevtchn_fd()
has exactly one correct implementation.
Implement it in core.c, rather than identically for each OS. This matches all
other libraries (call, gnttab, gntshr) which implement an fd getter.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
"make distclean" will complain that "-c" is no supported flag for make.
Fix that by using "-C".
The error has been present for a long time, but it was uncovered only
recently.
Fixes: 2400a9a365 ("tools/debugger: Allow make to recurse into debugger/")
Fixes: f9c9b12775 ("tools: fix make distclean")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Top level table and intermediate table entries get explicitly set to
INVALID_MFN when un-allocated. There's therefore no need to use the more
expensive mfn_valid() when checking for that sentinel.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The function returning a boolean indicator, make it return bool. Also
constify its struct domain parameter, albeit requiring to also adjust
mm_locked_by_me(). Furthermore the function is used by shadow code only.
Since mm_locked_by_me() needs touching anyway, also switch its return
type to bool.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Change the support state of Linux and Windows pv frontends from
"supported" to "supported with caveats" in order to reflect that the
frontends can probably be harmed by their respective backends.
Some of the Linux frontends have been hardened already.
This is XSA-376
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The HV_X64_MSR_EOI wrmsr should always happen with the target vCPU
as current, as there's no support for EOI'ing interrupts on a remote
vCPU.
While there also turn the unconditional assert at the top of the
function into an error on non-debug builds.
No functional change intended.
Requested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Prior to XSA-304 the only caller merely happened to not use any further
the order value that it passes into the function. Already then this was
a latent issue: The function really should, in the "get" case, hand back
the order the underlying mapping actually uses (or actually the smaller
of the two), such that (going forward) there wouldn't be any action on
unrelated mappings (in particular ones which did already diverge from
the host P2M).
Similarly in the "propagate" case only the smaller of the two orders
should actually get used for creating the new entry, again to avoid
altering mappings which did already diverge from the host P2M.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tamas K Lengyel <tamas@tklengyel.com>
The 64-bit form forces %ecx to 0 while the 32-bit one so far didn't - it
only ended up that way when "pv_context" is zero. While presently no
leaf queried by callers has separate subleaves, let's avoid chancing it.
While there
- replace references to operands by number,
- relax constraints where possible,
- limit PUSH/POP to just the registers not also used as input,
all where applicable also for the 64-bit variant.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Since this logic was introduced, opt_tsx has become more complicated and
shouldn't be compared to 0 directly. While there are no buggy logic paths,
the correct expression is !(opt_tsx & 1) but the rtm_disabled boolean is
easier and clearer to use.
Fixes: 8fe24090d9 ("x86/cpuid: Rework HLE and RTM handling")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The first thing XEN_SYSCTL_physinfo does is zero op->u.physinfo.
Do not copy-in. It's pointless, and most callers don't initialise their
xc_physinfo_t buffer to begin with. Remove the redundant zeroing from the
remaining callers.
Spotted by Coverity.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Chen <Wei.Chen@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
There's no point producing a long chain of zeroes when the previously
calculated total value was zero. To guard against mistakenly skipping
non-zero individual fields, widen "sum" to "unsigned long long".
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
do_memory_op() supplies return value and has "errno" set the usual way.
Don't overwrite "errno" with 1 (aka EPERM on at least Linux). There's
also no reason to overwrite "err".
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Their calculations of the value to write to the respective command
register can be partly folded, resulting in almost 100 bytes less code
for these two relatively short functions.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Let's use the macro in the one place it's supposed to be used, and in
favor of then unnecessary manipulations of the address in
iommu_flush_iotlb_psi(): All leaf functions then already deal correctly
with the supplied address.
There also has never been a need to require (i.e. assert for) the
passing in of 4k-aligned addresses - it'll always be the order-sized
range containing the address which gets flushed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Let's eliminate the risk of any of these macros getting used with more
complex expressions as arguments.
Where touching lines anyway, also
- switch from u64 to uint64_t,
- drop unnecessary parentheses,
- drop pointless 0x prefixes.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
This table must not have got updated in quite a while; tmem_op for
example has managed to not only appear since then, but also disappear
again (adding a name for it nevertheless, to make more obvious that
something strange is going on if the slot would ever have a non-zero
value).
Also resolve arch_0 and arch_1 to more meaningful names on x86.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When an IOMMU implements the full 16 bits worth of DID in context
entries, there's no point going through a memory base translation table.
For IOMMUs not using Caching Mode we can simply use the domain IDs
verbatim, while for Caching Mode we need to avoid DID 0.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
ept_free_entry() gets called after a flush was already issued, if one is
necessary in the first place. That behavior is similar to NPT, which
also doesn't have any further flush in p2m_free_entry(). (Furthermore,
the function being recursive, in case of recursiveness way too many
flushes would have been issued.)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
This allows properly tying together INVALID_{G,M}FN and
INVALID_{G,M}FN_INITIALIZER as well as using the actual values in
compile time constant expressions (or even preprocessor directives).
Since INVALID_PFN is unused, and with x86'es paging_mark_pfn_dirty()
being the only user of pfn_t it also doesn't seem likely that new uses
would appear, remove that one at this same occasion.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
There's no point including them when the respective functionality isn't
enabled in the build. Note that this covers only larger groups; more
fine grained exclusion may want to be done later on.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
do{_unhandled,}_trap() should use fatal_trap() rather than opencoding part of
it. This lets the remote stack trace logic work in more fatal error
conditions.
With do_trap() converted, there is only one single user of trapstr()
remaining. Tweak the formatting in pv_inject_event(), and remove trapstr()
entirely. Rename vec_name() to vector_name() now that it is exported.
Take the opportunity of vector_name() being exported to improve the
diagnostics in stub_selftest().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
There is also a lot of redundancy in the table. 8 vectors head to do_trap(),
3 are handled in the IST logic, and that only leaves 7 others not heading to
the do_reserved_trap() catch-all. This also removes the fragility that any
accidental NULL entry in the table becomes a ticking timebomb.
Function pointers are expensive under retpoline, and different vectors have
wildly different frequences. Drop the indirect call, and use an if/else chain
instead, which is a code layout technique used by profile-guided optimsiation.
Using Xen's own perfcounter infrastructure, we see the following frequences of
vectors measured from boot until I can SSH into dom0 and collect the stats:
vec | CFL-R | Milan | Notes
----+---------+---------+
NMI | 345 | 3768 | Watchdog. Milan has many more CPUs.
----+---------+---------+
#PF | 1233234 | 2006441 |
#GP | 90054 | 96193 |
#UD | 848 | 851 |
#NM | 0 | 132 | Per-vendor lazy vs eager FPU policy.
#DB | 67 | 67 | No clue, but it's something in userspace.
Bloat-o-meter (after some manual insertion of ELF metadata) reports:
add/remove: 0/1 grow/shrink: 2/0 up/down: 102/-256 (-154)
Function old new delta
handle_exception_saved 148 226 +78
handle_ist_exception 453 477 +24
exception_table 256 - -256
showing that the if/else chains are less than half the size that
exception_table[] was in the first place.
As part of this change, make two other minor changes. do_reserved_trap() is
renamed to do_unhandled_trap() because it is the catchall, and already covers
things that aren't reserved any more (#VE/#VC/#HV/#SX).
Furthermore, don't forward #TS to guests. #TS is specifically for errors
relating to the Task State Segment, which is a Xen-owned structure, not a
guest-owned structure. Even in the 32bit days, we never let guests register
their own Task State Segments.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Function pointer calls are expensive (especially with Spectre v2 protections),
and all these do are select between the sync and nosync helpers. Pass a
boolean instead, and use direct calls everywhere.
Pause/unpause operations on behalf of dom0 are not fastpaths, so avoid
exposing the __domain_pause_by_systemcontroller() internal.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
to hypervisor when switching from AArch32 state.
According to section D1.20.2 of Arm Arm(DDI 0487A.j):
"If the general-purpose register was accessible from AArch32 state the
upper 32 bits either become zero, or hold the value that the same
architectural register held before any AArch32 execution.
The choice between these two options is IMPLEMENTATION DEFINED"
Currently Xen does not ensure that the top 32 bits are zeroed and this
needs to be fixed. The reason why is that there are places in Xen
where we assume that top 32bits are zero for AArch32 guests.
If they are not, this can lead to misinterpretation of Xen regarding
what the guest requested. For example hypercalls returning an error
encoded in a signed long like do_sched_op, do_hmv_op, do_memory_op
would return -ENOSYS if the command passed as the first argument was
clobbered.
Create a macro clobber_gp_top_halves to clobber top 32 bits of gp
registers when hyp == 0 (guest mode) and compat == 1 (AArch32 mode).
Add a compile time check to ensure that save_x0_x1 == 1 if
compat == 1.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
[julieng: Tweak the comment in clobber_gp_top_halves]
Acked-by: Julien Grall <jgrall@amazon.com>
Since several years now xenstored is no longer capable to run under
SunOS, as the needed libxengnttab interfaces are not available there.
Several attempts to let the SunOS maintainers address this situation
didn't change anything in this regard.
For those reasons drop SunOS support in xenstored by removing the SunOS
specific code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
For one at least pci_mem_start has to be precisely 32 bits wide, so use
uint32_t for both. Otherwise expressions like "pci_mem_start <<= 1"
won't have the intended effect (in their context).
Further since its introduction pci_mem_end was never written to. Mark it
const to make this explicit.
Finally drop PCI_MEM_END: It is used just once and needlessly
disconnected from the other constant (RESERVED_MEMBASE) it needs to
match. Use RESERVED_MEMBASE as initializer of pci_mem_end instead.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This reverts commit c22bd567ce.
While its description is correct from an abstract or real hardware pov,
the range is special inside HVM guests. The range being UC in particular
gets in the way of OVMF, which places itself at [FFE00000,FFFFFFFF].
While this is benign to epte_get_entry_emt() as long as the IOMMU isn't
enabled for a guest, it becomes a very noticable problem otherwise: It
takes about half a minute for OVMF to decompress itself into its
designated address range.
And even beyond OVMF there's no reason to have e.g. the ACPI memory
range marked UC.
Fixes: c22bd567ce ("hvmloader: PA range 0xfc000000-0xffffffff should be UC")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Currently the Xen UEFI stub can accept Xen boot arguments from
the Xen configuration file using the "options=" keyword, but also
directly from the device tree specifying xen,xen-bootargs
property.
When the configuration file is used, device tree boot arguments
are ignored and overwritten even if the keyword "options=" is
not used.
This patch handle this case, so if the Xen configuration file is not
specifying boot arguments, the device tree boot arguments will be
used, if they are present.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Currently the maximum number of memory banks (NR_MEM_BANKS define)
is fixed to 128, but on some new platforms that have a large amount
of memory, this value is not enough and prevents Xen from booting.
Increase the value to 256.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
I've played with SERIALIZE, TSXLDTRK, MOVDIRI and MOVDIR64 on real hardware,
and they all seem fine, including emulation support.
SERIALIZE exists specifically to have a userspace usable serialising operation
without other side effects. (The only other two choices are CPUID which is a
VMExit under virt and clobbers 4 registers, and IRET-to-self which very slow
and consumes content from the stack.)
TSXLDTRK is a niche TSX feature, and TSX itself is niche outside of demos of
speculative sidechannels. Leave the feature opt-in until a usecase is found,
in an effort to preempt the multiple person years of effort it has taken to
mop up TSX issues impacting every processor line.
MOVDIRI and MOVDIR64 are harder to judge. They're architectural building
blocks towards ENQCMD{,S} without obvious usecases on their own. They're of
no use to domains without PCI devices, so leave them opt-in for now.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Specifically, this lets the user opt in to non-default features.
Collect all dom0 settings together in dom0_{en,dis}able_feat[], and apply it
to dom0's policy when other tweaks are being made.
As recalculate_cpuid_policy() is an expensive action, and dom0-cpuid= is
likely to only be used by the x86 maintainers for development purposes, forgo
the recalculation in the general case.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
dom0-cpuid= is going to want to reuse the common parsing loop, so factor it
out into parse_cpuid().
Irritatingly, despite being static const, the features[] array gets duplicated
each time parse_cpuid() is inlined. As it is a large (and ever growing with
new CPU features) datastructure, move it to being file scope so all inlines
use the same single object.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
To implement dom0-cpuid= support, the special cases would need extending.
However there is already a problem with late hwdom where the special cases
override toolstack settings, which is unintended and poor behaviour.
Introduce a new init_dom0_cpuid_policy() for the purpose, moving the ITSC and
ARCH_CAPS logic. The is_hardware_domain() can be dropped, and for now there
is no need to rerun recalculate_cpuid_policy(); this is a relatively expensive
operation, and will become more-so over time.
Rearrange the logic in create_dom0() to make room for a call to
init_dom0_cpuid_policy(). The AMX plans for having variable sized XSAVE
states require that modifications to the policy happen before vCPUs are
created.
Additionally, factor out domid into a variable so we can be slightly more
correct in the case of a failure, and also print the error from
domain_create(). This will at least help distinguish -EINVAL from -ENOMEM.
No practical change in behaviour.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Avoid generating *.map files or running headers.chk when all we need
is the libxen*.a.
Also, allow force make to check again if libxen*.a needs rebuilt by
adding a '.PHONY' prerequisite.
Also, remove DESTDIR= as we don't do installation in this target, so
the value of DESTDIR doesn't matter.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
PKG_CONFIG_VARS isn't set anymore, so is dead logic.
For "local" pkg-config file, we only have one headers directory now,
"tools/include", so there is no need to specify it twice. So remove
$(CFLAGS_xeninclude) from "Cflags:".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
With "xentoolcore_internal.h" been in LIBHEADER, it was installed. But
its dependency "_xentoolcore_list.h" wasn't installed so the header
couldn't be used anyway.
This patch also mean that the rule "headers.chk" doesn't check it
anymore as well.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
"libs" is odd and has been introduced without a reason by c7d3afbb44.
Instead, only use "all".
Also remove "build" target as "all" is more appropriate and nothing is
using "build" in libs/ in the xen.git repo.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Lukasz Hawrylko
Nick Rosbrook
Jan Beulich
Andrew Cooper
Jason Andryuk
Daniel P. Smith
Juergen Gross
Roger Pau Monné
Michal Orzel
Luca Fancellu
Anthony PERARD