Reuse generic IOMMU device tree bindings to communicate Xen specific
information for the virtio devices for which the restricted memory
access using Xen grant mappings need to be enabled.
Insert "iommus" property pointed to the IOMMU node with "xen,grant-dma"
compatible to all virtio devices which backends are going to run in
non-hardware domains (which are non-trusted by default).
Based on device-tree binding from Linux:
Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
The example of generated nodes:
xen_iommu {
compatible = "xen,grant-dma";
#iommu-cells = <0x01>;
phandle = <0xfde9>;
};
virtio@2000000 {
compatible = "virtio,mmio";
reg = <0x00 0x2000000 0x00 0x200>;
interrupts = <0x00 0x01 0xf01>;
interrupt-parent = <0xfde8>;
dma-coherent;
iommus = <0xfde9 0x01>;
};
virtio@2000200 {
compatible = "virtio,mmio";
reg = <0x00 0x2000200 0x00 0x200>;
interrupts = <0x00 0x02 0xf01>;
interrupt-parent = <0xfde8>;
dma-coherent;
iommus = <0xfde9 0x01>;
};
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This patch introduces helpers to allocate Virtio MMIO params
(IRQ and memory region) and create specific device node in
the Guest device-tree with allocated params. In order to deal
with multiple Virtio devices, reserve corresponding ranges.
For now, we reserve 1MB for memory regions and 10 SPIs.
As these helpers should be used for every Virtio device attached
to the Guest, call them for Virtio disk(s).
Please note, with statically allocated Virtio IRQs there is
a risk of a clash with a physical IRQs of passthrough devices.
For the first version, it's fine, but we should consider allocating
the Virtio IRQs automatically. Thankfully, we know in advance which
IRQs will be used for passthrough to be able to choose non-clashed
ones.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds basic support for configuring and assisting virtio-mmio
based virtio-disk backend (emulator) which is intended to run out of
Qemu and could be run in any domain.
Although the Virtio block device is quite different from traditional
Xen PV block device (vbd) from the toolstack's point of view:
- as the frontend is virtio-blk which is not a Xenbus driver, nothing
written to Xenstore are fetched by the frontend currently ("vdev"
is not passed to the frontend). But this might need to be revised
in future, so frontend data might be written to Xenstore in order to
support hotplugging virtio devices or passing the backend domain id
on arch where the device-tree is not available.
- the ring-ref/event-channel are not used for the backend<->frontend
communication, the proposed IPC for Virtio is IOREQ/DM
it is still a "block device" and ought to be integrated in existing
"disk" handling. So, re-use (and adapt) "disk" parsing/configuration
logic to deal with Virtio devices as well.
For the immediate purpose and an ability to extend that support for
other use-cases in future (Qemu, virtio-pci, etc) perform the following
actions:
- Add new disk backend type (LIBXL_DISK_BACKEND_STANDALONE) and reflect
that in the configuration
- Introduce new disk "specification" and "transport" fields to struct
libxl_device_disk. Both are written to the Xenstore. The transport
field is only used for the specification "virtio" and it assumes
only "mmio" value for now.
- Introduce new "specification" option with "xen" communication
protocol being default value.
- Add new device kind (LIBXL__DEVICE_KIND_VIRTIO_DISK) as current
one (LIBXL__DEVICE_KIND_VBD) doesn't fit into Virtio disk model
An example of domain configuration for Virtio disk:
disk = [ 'phy:/dev/mmcblk0p3, xvda1, backendtype=standalone, specification=virtio']
Nothing has changed for default Xen disk configuration.
Please note, this patch is not enough for virtio-disk to work
on Xen (Arm), as for every Virtio device (including disk) we need
to allocate Virtio MMIO params (IRQ and memory region) and pass
them to the backend, also update Guest device-tree. The subsequent
patch will add these missing bits. For the current patch,
the default "irq" and "base" are just written to the Xenstore.
This is not an ideal splitting, but this way we avoid breaking
the bisectability.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Tested-by: Jiamei Xie <jiamei.xie@arm.com>
BTC_NO indicates that hardware is not succeptable to Branch Type Confusion.
Zen3 CPUs don't suffer BTC.
This is part of XSA-407.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
libxl__xs_directory() can potentially return NULL without setting `n`.
As `n` isn't initialised, we need to check libxl__xs_directory()
return value before checking `n`. Otherwise, `n` might be non-zero
with `bdfs` NULL which would lead to a segv.
Fixes: 57bff091f4 ("libxl: add 'name' field to 'libxl_device_pci' in the IDL...")
Reported-by: "G.R." <firemeteor@users.sourceforge.net>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: "G.R." <firemeteor@users.sourceforge.net>
Introduce a new per-domain creation x86 specific flag to
select whether hardware assisted virtualization should be used for
x{2}APIC.
A per-domain option is added to xl in order to select the usage of
x{2}APIC hardware assisted virtualization, as well as a global
configuration option.
Having all APIC interaction exit to Xen for emulation is slow and can
induce much overhead. Hardware can speed up x{2}APIC by decoding the
APIC access and providing a VM exit with a more specific exit reason
than a regular EPT fault or by altogether avoiding a VM exit.
On the other hand, being able to disable x{2}APIC hardware assisted
virtualization can be useful for testing and debugging purposes.
Note:
- vmx_install_vlapic_mapping doesn't require modifications regardless
of whether the guest has "Virtualize APIC accesses" enabled or not,
i.e., setting the APIC_ACCESS_ADDR VMCS field is fine so long as
virtualize_apic_accesses is supported by the CPU.
- Both per-domain and global assisted_x{2}apic options are not part of
the migration stream, unless explicitly set in the respective
configuration files. Default settings of assisted_x{2}apic done
internally by the toolstack, based on host capabilities at create
time, are not migrated.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Add XEN_SYSCTL_PHYSCAP_X86_ASSISTED_XAPIC and
XEN_SYSCTL_PHYSCAP_X86_ASSISTED_X2APIC to report accelerated xAPIC and
x2APIC, on x86 hardware. This is so that xAPIC and x2APIC virtualization
can subsequently be enabled on a per-domain basis.
No such features are currently implemented on AMD hardware.
HW assisted xAPIC virtualization will be reported if HW, at the
minimum, supports virtualize_apic_accesses as this feature alone means
that an access to the APIC page will cause an APIC-access VM exit. An
APIC-access VM exit provides a VMM with information about the access
causing the VM exit, unlike a regular EPT fault, thus simplifying some
internal handling.
HW assisted x2APIC virtualization will be reported if HW supports
virtualize_x2apic_mode and, at least, either apic_reg_virt or
virtual_intr_delivery. This also means that
sysctl follows the conditionals in vmx_vlapic_msr_changed().
For that purpose, also add an arch-specific "capabilities" parameter
to struct xen_sysctl_physinfo.
Note that this interface is intended to be compatible with AMD so that
AVIC support can be introduced in a future patch. Unlike Intel that
has multiple controls for APIC Virtualization, AMD has one global
'AVIC Enable' control bit, so fine-graining of APIC virtualization
control cannot be done on a common interface.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Allow administrators to notify a frontend driver that it's backend
counterpart is not to be trusted, so the frontend can deploy whatever
mitigations required in order to secure itself.
Allow such option for disk and network frontends only, as those are
the only hardened ones currently supported.
This is part of XSA-403
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
A leading underscore is used to indicate auto generated headers, and
the clean use of 'rm -f _*.h' will remove those. _xen_list.h also
uses a leading underscore, but is checked in the repo and as such
cannot be removed as part of the clean rule.
Fix this by dropping the leading underscore, so that the header is not
removed.
Fixes: a03b3552d4 ('libs,tools/include: Clean "clean" targets')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The only thing done thing done with $(SRCS-y) is to replace ".c" by
".o". It is more useful to collect which object we want to build as
make will figure out how to build it and from which source file.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
There is no need for an extra "cleanlocal" target, we can use
double-colon rules instead.
Generated headers are now in tools/include/, so remove those file
there.
Remove -f flag as it's already in $(RM).
libs.mk:
- don't try to remove "*.rpm" anymore.
libs/light:
- "_paths.*.tmp" isn't created anymore.
- clean "libxenlight_test.so" and "libxl_test_*.opic".
libs/stat:
- don't remove $(DEPS_RM) from here as it is already done in
"libs.mk".
libs/util:
- fix clean of version-script file.
include/xen-foreign:
- remove __pycache__
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
There is no need for an extra "installlocal" target, we can use
double-colon rules instead.
"install-headers" in "libs/store" was introduced for the same reason
that "installlocal" exist, so it is replaced as well.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
LDLIBS is more appropriate and intended to be used to add library
dependencies. APPEND_LDFLAGS wasn't intended to be changed by the
build system.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Commit 92ea9c54fc ("arm/dom0less: assign dom0less guests to cpupools")
introduced a way to start a domain directly on a certain cpupool,
adding a "cpupool_id" member to struct xen_domctl_createdomain.
This was done to be able to start dom0less guests in different pools than
cpupool0, but the toolstack can benefit from it because it can now use
the struct member directly instead of creating the guest in cpupool0
and then moving it to the target cpupool.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
libxl is leaking self pipes to child processes. These can be seen when
running with env var _LIBXL_DEBUG_EXEC_FDS=1:
libxl: debug: libxl_aoutils.c:593:libxl__async_exec_start: forking to execute: /etc/xen/scripts/vif-bridge online
[Detaching after fork from child process 5099]
libxl: execing /etc/xen/scripts/vif-bridge: fd 4 is open to pipe:[46805] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 13 is open to pipe:[46807] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 14 is open to pipe:[46807] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 19 is open to pipe:[48570] with flags 0
libxl: execing /etc/xen/scripts/vif-bridge: fd 20 is open to pipe:[48570] with flags 0
(fd 3 is also open, but the check only starts at 4 for some reason.)
For xl, this is the poller created by libxl_ctx_alloc, the poller
created by do_domain_create -> libxl__ao_create, and the self pipe for
libxl__sigchld_needed. Set CLOEXEC on the FDs so they are not leaked
into children.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
libxl_domain_setmaxmem() called during "xl mem-max" should update the
domain's memory/static-max Xenstore node, as otherwise "xl mem-set"
won't be able to set the memory size to the new maximum.
Adjust the related comments and documentation accordingly.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Expose the MCDT_NO CPUID flag to guests if available. The bit signals
that the CPU does not exhibit MCDT behavior, and as such can be
exposed without requiring any additional work.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
With the introduction of boot time cpupools, Xen can create many
different cpupools at boot time other than cpupool with id 0.
Since these newly created cpupools can't have an
entry in Xenstore, create the entry using xen-init-dom0
helper with the usual convention: Pool-<cpupool id>.
Given the change, remove the check for poolid == 0 from
libxl_cpupoolid_to_name(...).
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The reference "to shadow the resident processes" is applicable to
domains (potentially) running in shadow mode only. Adjust the
calculations accordingly. This, however, requires further parameters.
Since the original function is deprecated anyway, and since it can't be
changed (for being part of a stable ABI), introduce a new (internal
only) function, with the deprecated one simply becoming a wrapper.
In dom0_paging_pages() also take the opportunity and stop open-coding
DIV_ROUND_UP().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
PCI device assignment to an HVM with stubdom is potentially racy. First
the PCI device is assigned to the stubdom via the PV PCI protocol. Then
QEMU is sent a QMP command to attach the PCI device to QEMU running
within the stubdom. However, the sysfs entries within the stubdom may
not have appeared by the time QEMU receives the device_add command
resulting in errors like:
libxl_qmp.c:1838:qmp_ev_parse_error_messages:Domain 10:Could not open '/sys/bus/pci/devices/0000:00:1f.3/config': No such file or directory
This patch retries the device assignment up to 10 times with a 1 second
delay between. That roughly matches the overall hotplug timeout for
pci_add_timeout. pci_add_timeout's initialization is moved to
do_pci_add since retries call into pci_add_qmp_device_add again.
The qmp_ev_parse_error_messages error is still printed since it happens
at a lower level than the pci code controlling the retries. With that,
the "Retrying PCI add %d" message is also printed at ERROR level to
clarify what is happening.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Setting errno to a negative value makes no sense.
Fixes: e78e8b9bb6 ("libxl: Add interface for querying hypervisor about PCI topology")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
I've observed this failed assertion:
libxl_event.c:2057: libxl__ao_inprogress_gc: Assertion `ao' failed.
AFAICT, this is happening in qmp_proxy_spawn_outcome where
sdss->qmp_proxy_spawn.ao is NULL.
The out label of spawn_stub_launch_dm() calls qmp_proxy_spawn_outcome(),
but it is only in the success path that sdss->qmp_proxy_spawn.ao gets
set to the current ao.
qmp_proxy_spawn_outcome() should instead use sdss->dm.spawn.ao, which is
the already in-use ao when spawn_stub_launch_dm() is called. The same
is true for spawn_qmp_proxy().
With this, move sdss->qmp_proxy_spawn.ao initialization to
spawn_qmp_proxy() since its use is for libxl__spawn_spawn() and it can
be initialized along with the rest of sdss->qmp_proxy_spawn.
Fixes: 83c845033d ("libxl: use vchan for QMP access with Linux stubdomain")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
If domain_soft_reset_cb can't rename the save file, it doesn't call
initiate_domain_create() and calls domcreate_complete().
Skipping initiate_domain_create() means dcs->console_wait is
uninitialized and all 0s.
We have:
domcreate_complete()
libxl__xswait_stop()
libxl__ev_xswatch_deregister().
The uninitialized slotnum 0 is considered valid (-1 is the invalid
sentinel), so the NULL pointer path to passed to xs_unwatch() which
segfaults.
libxl__ev_xswatch_deregister:watch w=0x12bc250 wpath=(null) token=0/0: deregister slotnum=0
Move dcs->console_xswait initialization into the callers of
initiate_domain_create, do_domain_create() and do_domain_soft_reset(),
so it is initialized along with the other dcs state.
Fixes: c57e6ebd8c ("(lib)xl: soft reset support")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
libxl__stubdomain_is_linux can take a const pointer, so make the change.
This isn't an issue in-tree, but was found with an OpenXT patch where it
was called with only const libxl_domain_build_info available.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Prevent libxl from creating guests that attempts to use PoD together
with an IOMMU, even if no devices are actually assigned.
While the hypervisor could support using PoD together with an IOMMU as
long as no devices are assigned, such usage seems doubtful. There's no
guarantee the guest has PoD no longer be active, and thus a later
assignment of a PCI device to such domain could fail.
Preventing the usage of PoD together with an IOMMU at guest creation
avoids having to add checks for active PoD entries in the device
assignment paths.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The Feb 2022 microcode from Intel retrofits AMD's MSR_SPEC_CTRL.PSFD interface
to Sunny Cove (IceLake) and later cores.
Update the MSR_SPEC_CTRL emulation, and expose it to guests.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Some libs' Makefile aren't loading the dependencies files *.d2.
We can load them from "libs.mk" as none of the Makefile here are
changing $(DEPS) or $(DEPS_INCLUDE) so it is fine to move the
"include" to "libs.mk".
As a little improvement, don't load the dependencies files (and thus
avoid regenerating the *.d2 files) during `make clean`.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Remove generating _libxl_list.h and use the common _xen_list.h instead.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
If we are in libxl_list_vcpu() and we are returning NULL, let's avoid
touching the output parameter *nr_vcpus_out, which the caller should
have initialized to 0.
The current behavior could be problematic if are creating a domain and,
in the meantime, an existing one is destroyed when we have already done
some steps of the loop. At which point, we'd return a NULL list of vcpus
but with something different than 0 as the number of vcpus in that list.
And this can cause troubles in the callers (e.g., nr_vcpus_on_nodes()),
when they do a libxl_vcpuinfo_list_free().
Crashes due to this are rare and difficult to reproduce, but have been
observed, with stack traces looking like this one:
#0 libxl_bitmap_dispose (map=map@entry=0x50) at libxl_utils.c:626
#1 0x00007fe72c993a32 in libxl_vcpuinfo_dispose (p=p@entry=0x38) at _libxl_types.c:692
#2 0x00007fe72c94e3c4 in libxl_vcpuinfo_list_free (list=0x0, nr=<optimized out>) at libxl_utils.c:1059
#3 0x00007fe72c9528bf in nr_vcpus_on_nodes (vcpus_on_node=0x7fe71000eb60, suitable_cpumap=0x7fe721df0d38, tinfo_elements=48, tinfo=0x7fe7101b3900, gc=0x7fe7101bbfa0) at libxl_numa.c:258
#4 libxl__get_numa_candidate (gc=gc@entry=0x7fe7100033a0, min_free_memkb=4233216, min_cpus=4, min_nodes=min_nodes@entry=0, max_nodes=max_nodes@entry=0, suitable_cpumap=suitable_cpumap@entry=0x7fe721df0d38, numa_cmpf=0x7fe72c940110 <numa_cmpf>, cndt_out=0x7fe721df0cf0, cndt_found=0x7fe721df0cb4) at libxl_numa.c:394
#5 0x00007fe72c94152b in numa_place_domain (d_config=0x7fe721df11b0, domid=975, gc=0x7fe7100033a0) at libxl_dom.c:209
#6 libxl__build_pre (gc=gc@entry=0x7fe7100033a0, domid=domid@entry=975, d_config=d_config@entry=0x7fe721df11b0, state=state@entry=0x7fe710077700) at libxl_dom.c:436
#7 0x00007fe72c92c4a5 in libxl__domain_build (gc=0x7fe7100033a0, d_config=d_config@entry=0x7fe721df11b0, domid=975, state=0x7fe710077700) at libxl_create.c:444
#8 0x00007fe72c92de8b in domcreate_bootloader_done (egc=0x7fe721df0f60, bl=0x7fe7100778c0, rc=<optimized out>) at libxl_create.c:1222
#9 0x00007fe72c980425 in libxl__bootloader_run (egc=egc@entry=0x7fe721df0f60, bl=bl@entry=0x7fe7100778c0) at libxl_bootloader.c:403
#10 0x00007fe72c92f281 in initiate_domain_create (egc=egc@entry=0x7fe721df0f60, dcs=dcs@entry=0x7fe7100771b0) at libxl_create.c:1159
#11 0x00007fe72c92f456 in do_domain_create (ctx=ctx@entry=0x7fe71001c840, d_config=d_config@entry=0x7fe721df11b0, domid=domid@entry=0x7fe721df10a8, restore_fd=restore_fd@entry=-1, send_back_fd=send_back_fd@entry=-1, params=params@entry=0x0, ao_how=0x0, aop_console_how=0x7fe721df10f0) at libxl_create.c:1856
#12 0x00007fe72c92f776 in libxl_domain_create_new (ctx=0x7fe71001c840, d_config=d_config@entry=0x7fe721df11b0, domid=domid@entry=0x7fe721df10a8, ao_how=ao_how@entry=0x0, aop_console_how=aop_console_how@entry=0x7fe721df10f0) at libxl_create.c:2075
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Tested-by: James Fehlig <jfehlig@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
By writing an empty "hotplug-status" xenstore node in the backend path
libxl can force Linux netback to wait for hotplug script execution
before proceeding to the 'connected' state.
This is required so that netback doesn't skip state 2 (InitWait) and
thus blocks libxl waiting for such state in order to launch the
hotplug script (see libxl__wait_device_connection).
Reported-by: James Dingwall <james-xen@dingwall.me.uk>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: James Dingwall <james-xen@dingwall.me.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Tested-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
commit 0fdb48ffe7 "libxl: Make sure devices added by pci-attach are
reflected in the config" broken PCI hotplug (xl pci-attach) for PV
domains when it moved libxl__create_pci_backend() later in the function.
This also broke HVM + stubdom PCI passthrough coldplug. For that, the
PCI devices are hotplugged to a running PV stubdom, and then the QEMU
QMP device_add commands are made to QEMU inside the stubdom.
A running PV domain calls libxl__wait_for_backend(). With the current
placement of libxl__create_pci_backend(), the path does not exist and
the call immediately fails:
libxl: error: libxl_device.c:1388:libxl__wait_for_backend: Backend /local/domain/0/backend/pci/43/0 does not exist
libxl: error: libxl_pci.c:1764:device_pci_add_done: Domain 42:libxl__device_pci_add failed for PCI device 0:2:0.0 (rc -3)
libxl: error: libxl_create.c:1857:domcreate_attach_devices: Domain 42:unable to add pci devices
The wait is only relevant when:
1) The domain is PV
2) The domain is running
3) The backend is already present
This is because:
1) xen-pcifront is only used for PV. It does not load for HVM domains
where QEMU is used.
2) If the domain is not running (starting), then the frontend state will
be Initialising. xen-pciback waits for the frontend to transition to
at Initialised before attempting to connect. So a wait for a
non-running domain is not applicable as the backend will not
transition to Connected.
3) For presence, num_devs is already used to determine if the backend
needs to be created. Re-use num_devs to determine if the backend
wait is necessary. The wait is necessary to avoid racing with
another PCI attachment reconfiguring the front/back or changing to
some other state like closing. If we are creating the backend, then
we don't have to worry about the state since it is being created.
Fixes: 0fdb48ffe7 ("libxl: Make sure devices added by pci-attach are
reflected in the config")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The first thing XEN_SYSCTL_physinfo does is zero op->u.physinfo.
Do not copy-in. It's pointless, and most callers don't initialise their
xc_physinfo_t buffer to begin with. Remove the redundant zeroing from the
remaining callers.
Spotted by Coverity.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Chen <Wei.Chen@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
"libs" is odd and has been introduced without a reason by c7d3afbb44.
Instead, only use "all".
Also remove "build" target as "all" is more appropriate and nothing is
using "build" in libs/ in the xen.git repo.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
This avoid the need to generate the _paths.h header when the
information is from autoconf anyway.
They are no more users of the "buildmakevars2header" macro, so it can
be removed from "Config.mk".
Also removed the extra "-f" flag where "$(RM)" is used (xl/Makefile).
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The values are already available in dom->{console,xenstore}_pfn, just like on
the PV side of things. No need to ask Xen.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
TSXLDTRK lives in CPUID leaf 7[0].edx, not 7[0].ecx.
Bit 16 in ecx is LA57.
Fixes: a6d1b55847 ("x86emul: support X{SUS,RES}LDTRK")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This var was originally $(CFLAGS_$*.o), and probably was copied from
the generic %.o:%.c rules.
Nothing sets CFLAGS_libxl.o, so remove it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The size of the video memory of PVH guests should be set to 0 in case
no value has been specified.
Doing not so will leave it to be -1, resulting in an additional 1 kB
of RAM being advertised in the memory map (here the output of a PVH
Mini-OS boot with 16 MB of RAM assigned):
Memory map:
000000000000-0000010003ff: RAM
0000feff8000-0000feffffff: Reserved
0000fc008000-0000fc00803f: ACPI
0000fc000000-0000fc000fff: ACPI
0000fc001000-0000fc007fff: ACPI
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
The HVM parameters for pre-allocated event channels should be set in
libxenguest, like it is done for PV guests, and the ring pages that
libxenguest allocates.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Such macro just clamps the passed version to fit in the designated
bits of the domctl field. The main purpose is to make it clearer in
the code when max grant version is being set in the grant_opts field.
Existing users that where setting the version in the grant_opts field
are switched to use the macro.
No functional change intended.
Requested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Introduce a new domain create field so that toolstack can specify the
maximum grant table version usable by the domain. This is plumbed into
xl and settable by the user as max_grant_version.
Previously this was only settable on a per host basis using the
gnttab command line option.
Note the version is specified using 4 bits, which leaves room to
specify up to grant table version 15. Given that we only have 2 grant
table versions right now, and a new version is unlikely in the near
future using 4 bits seems more than enough.
xenstored stubdomains are limited to grant table v1 because the
current MiniOS code used to build them only has support for grants v1.
There are existing limits set for xenstored stubdomains at creation
time that already match the defaults in MiniOS.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
In order to let the toolstack be able to set the gnttab version on a
per-domain basis, it needs to know which ABIs Xen supports. Introduce
XEN_SYSCTL_PHYSCAP_gnttab_v{1,2} for the purpose, and plumb in down into
userspace.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Releae-Acked-by: Ian Jackson <iwj@xenproject.org>
libxl will create an emulated PCI device tree node in the device tree to
enable the guest OS to discover the virtual PCI during guest boot.
Emulated PCI device tree node will only be created when there is any
device assigned to guest.
A new area has been reserved in the arm guest physical map at
which the VPCI bus is declared in the device tree (reg and ranges
parameters of the node).
Note that currently we are using num_pcidevs instead of
c_info->passthrough to decide whether to create a vPCI DT node.
This will be insufficient if and when ARM does PCI hotplug.
Add this note inside libxl_create.c where c_info->passthrough
is set.
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
... to take a second argument of type libxl_domain_config*
rather than libxl_domain_build_info*.
This change will be needed to get access from
libxl__prepare_dtb to "num_pcidevs" field of
libxl_domain_config to check whether to create
a vPCI DT node or not.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Suggested-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
... to take a second argument of type libxl_domain_config*
rather than libxl_domain_build_info*.
We need to pass the whole libxl_domain_config
structure as this will be needed later on to modify
the libxl__prepare_dtb function to also take
libxl_domain_config.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Suggested-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The extended region (safe range) is a region of guest physical
address space which is unused and could be safely used to create
grant/foreign mappings instead of wasting real RAM pages from
the domain memory for establishing these mappings.
The extended regions are chosen at the domain creation time and
advertised to it via "reg" property under hypervisor node in
the guest device-tree. As region 0 is reserved for grant table
space (always present), the indexes for extended regions are 1...N.
If extended regions could not be allocated for some reason,
Xen doesn't fail and behaves as usual, so only inserts region 0.
Please note the following limitations:
- The extended region feature is only supported for 64-bit domain
currently.
- The ACPI case is not covered.
***
The algorithm to choose extended regions for non-direct mapped
DomU is simpler in comparison with the algorithm for direct mapped
Dom0. We usually have a lot of unused space above 4GB, and might
have some unused space below 4GB (depends on guest memory size).
Try to allocate separate 2MB-aligned extended regions from the first
(below 4GB) and second (above 4GB) RAM banks taking into the account
the maximum supported guest physical address space size and the amount
of memory assigned to the guest. The minimum size of extended region
the same as for Dom0 (64MB).
Please note, we introduce fdt_property_reg_placeholder helper which
purpose is to create N ranges that are zeroed. The interesting fact
is that libfdt already has fdt_property_placeholder(). But this was
introduced only in 2017, so there is a risk that some distros may not
ship the last libfdt version. This is why we implement our own light
variant for now.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
We need to pass info about maximum supported guest physical
address space size to the toolstack on Arm in order to properly
calculate the base and size of the extended region (safe range)
for the guest. The extended region is unused address space which
could be safely used by domain for foreign/grant mappings on Arm.
The extended region itself will be handled by the subsequent
patch.
Currently the same guest physical address space size is used
for all guests (p2m_ipa_bits variable on Arm, the x86 equivalent
is hap_paddr_bits).
Add an explicit padding after "gpaddr_bits" field and also
(while at it) after "domain" field.
Also make sure that full structure is cleared in all cases by
moving the clearing into getdomaininfo(). Currently it is only
cleared by the sysctl caller (and only once).
Please note, we do not need to bump XEN_DOMCTL_INTERFACE_VERSION
as a bump has already occurred in this release cycle. But we do
need to bump XEN_SYSCTL_INTERFACE_VERSION as the structure is
re-used in a sysctl.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
[hypervisor parts]
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add parameter vpmu to xl domain configuration syntax
to enable the access to PMU registers by disabling
the PMU traps(currently only for ARM).
The current status is that the PMU registers are not
virtualized and the physical registers are directly
accessible when this parameter is enabled. There is no
interrupt support and Xen will not save/restore the
register values on context switches.
According to Arm Arm, section D7.1:
"The Performance Monitors Extension is common
to AArch64 operation and AArch32 operation."
That means we have an ensurance that if PMU is
present in one exception state, it must also be
present in the other.
Please note that this feature is experimental.
Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Signed-off-by: Julien Grall <julien@xen.org>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <iwj@xenproject.org>
Oleksandr Tyshchenko
Julien Grall
Andrew Cooper
Anthony PERARD
Jane Malalane
Roger Pau Monne
Luca Fancellu
Jason Andryuk
Juergen Gross
Jan Beulich
Dario Faggioli
Rahul Singh
Michal Orzel
Ian Jackson