These fields need to be valid at all times. Hypervisor ensures this
even across 32/64-bit guest transitions.
This fixes a bug where wallclock time is incorrect for booting 32-bit
HVM guests.
This should be backported to Xen 4.1 and 4.2.
Signed-off-by: Keir Fraser <keir@xen.org>
Tested-and-Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen-unstable changeset: 25908:12fa949b9060
xen-unstable date: Fri Sep 14 18:47:57 UTC 2012
Do not expose the ACPI power management "_PS0/3" Method to guest
firmware. According to section 3.4 of the APCI specification 4.0, PCI
device control the device power through its own specification but not
through APCI.
Qemu pushes "_PS0/3" to guest will cause a mess between ACPI PM and
PCI PM as a result of incorrect ACPI table shipped with the guest
BIOS, it may cause a failure of PCI device PM state transition(from
PCI_UNKNOWN to PCI_D0).
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Haitao Shan <haitao.shan@intel.com>
Committed-by: Keir Fraser <keir@xen.org>
xen-unstable changeset: 24357:832fa3f35432
xen-unstable date: Mon Dec 05 19:35:06 2011 +0000
Backported some changes from current ipxe, to fix a issue with some
new versions of gcc that add -fPIC by default, and compilation fails
with the following error:
arch/i386/core/cpu.c: In function 'get_cpuinfo':
arch/i386/include/bits/cpu.h:79:2: error: inconsistent operand
constraints in an 'asm'
arch/i386/include/bits/cpu.h:79:2: error: inconsistent operand
constraints in an 'asm'
arch/i386/include/bits/cpu.h:79:2: error: inconsistent operand
constraints in an 'asm'
arch/i386/include/bits/cpu.h:79:2: error: inconsistent operand
constraints in an 'asm'
Two patches from ipxe git have been added. The problem is reproducible
with at least this version of gcc:
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-alpine-linux-uclibc/4.6.2/lto-wrapper
Target: x86_64-alpine-linux-uclibc
Configured with:
/home/buildozer/aports/main/gcc/src/gcc-4.6.2/configure --prefix=/usr
--mandir=/usr/share/man --infodir=/usr/share/info
--build=x86_64-alpine-linux-uclibc --host=x86_64-alpine-linux-uclibc
--target=x86_64-alpine-linux-uclibc --with-pkgversion='Alpine
4.6.2-r1' --disable-altivec --disable-checking --disable-fixed-point
--disable-libssp --disable-libstdcxx-pch --disable-multilib
--disable-nls --disable-werror --enable-__cxa_atexit --enable-cld
--enable-esp --enable-cloog-backend
--enable-languages=c,c++,objc,java,go --enable-shared
--enable-target-optspace --enable-tls --enable-threads
--with-dynamic-linker=ld64-uClibc.so.0.9.32
--with-dynamic-linker-prefix=/lib --with-system-zlib
--without-system-libunwind
Thread model: posix
gcc version 4.6.2 (Alpine 4.6.2-r1)
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Keir Fraser <keir@xen.org>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
xen-unstable changeset: 23049:ff3b7749008b
Backport-requested-by: Allen M Kay <allen.m.kay@intel.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is clearer and less fragile than trying to make relative calls
work. In particular, the old approach failed if _start was not
== HVMLOADER_PHYSICAL_ADDRESS. This was the case for some modern
toolchains which reorder functions.
Signed-off-by: Keir Fraser <keir@xen.org>
xen-unstable changeset: 23730:dd5eecf739d1
xen-unstable date: Wed Jul 20 15:02:16 2011 +0100
hvmloader: Remove hard tabs from source files.
Signed-off-by: Keir Fraser <keir@xen.org>
xen-unstable changeset: 23729:4f1109af9c63
xen-unstable date: Wed Jul 20 14:52:16 2011 +0100
1. Remove unportable O and D format specifiers
2. Fix X format specifier to print upper-case hex characters
3. Fix d format specifier to print -ve numbers
4. Fix handling of int vs. long (although not actually an issue
for the i386 compile target)
5. Don't use the antiquated C 'register' type attribute.
Signed-off-by: Keir Fraser <keir@xen.org>
Allows us to build even if the ipxe git server is down. We still fall
back to the git server if we cannot download a suitably named tarball
from our own URL.
Signed-off-by: Keir Fraser <keir@xen.org>
hvmloader is responsible for - amoungst other things - initialising
the PCI device BARs prior to loading the guest BIOS. The previous
code only probed for devfn up to 128. The lower 3 bits are function
IDs so this meant that only devices in slots 0-15 were actually being
initialized.
Signed-off-by: Alex Zeffertt <alex.zeffertt@eu.citrix.com>
Acked-by: Gianni Tedesco <gianni.tedesco@citrix.com>
This change some fadt values -- the address of the acpi ioports -- and
the pm1a_evt_address value wrote for the pci bus.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
As part of the QEMU/Xen merge, this patch comes to change the value of
sleep states and add some information in the PCI registers to match the
implementation of the BIOS of QEMU.
It also does a hypercall (HVM_PARAM_ACPI_IOPORTS_LOCATION) that tell the
Xen to use the new Port I/O instead of the old one.
[ Also, in this patch, update QEMU_TAG to the qemu-xen revision
with the corresponding qemu change. -iwj ]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Sometimes we would rather connect to an HVM's serial console than it's
VGA display. In this case we cannot see or interact with the ethernet
booting process. This is a bit annoying so let's just enable it.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
so that we don't corrupt E820_RAM memory with stack ops in S3 wakeup.
It has to move up so the lowest contiguous RAM area is >= 512MiB.
This relies on the previous fix to let DS != SS
Signed-off-by: Paul Durrant <Paul.Durrant@citrix.com>
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
rombios: inform the user and pause for a keypress after a failed boot
rather than powering off immediately.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
Also build gpxe without -Werror and require it always to be built (do
not include a pre-built binary in our source repo).
Portions of this patch are from Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
...because the default timesource (TSC) drifts under load.
The flag is only defined in ACPI 3.0, and we provide ACPI 2.0 tables,
but Windows seems happy enough to obey it anyway.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
When graphics card is assigned to a guest as a secondary VGA,
without gfx_passthru and emulated VGA is the primary VGA,
hvmloader misreads gfx_passthru is specified if VGA device is
found after the emulated VGA.
This patch fix this issue. If emulated VGA is found, hvmloader
preserves it and loads vgabios of the emulated VGA.
Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com>
Fix an ACPI asl bug by explicitly convert PRS to buffer, otherwise PRS
would be parsed as integer if less than 32/64 bits (according to ACPI
1.0 or 2.0).
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Move processor from \_PR to \_SB. ACPI processor can be defined
under \_PR or \_SB. However, recently os like linux 2.6.30/32 support
cpu hotplug better for \_SB processor object.
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Make build.c dependency on ssdt_{pm,tpm}.h explicit, else they can be
built in the wrong order.
Also, improve naming of target DSDT structures, and specify -p option
to iasl so that all generated files for a given target have
target-unique names, hence build can proceed safely in parallel.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Deploy this smaller DSDT where possible: this is required to boot
Windows 2000, which only supports up to 15 processors and will blue
screen if it sees more processor objects than that (even inactive
ones).
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
It's big and small changes generate huge diffs. People building the
firmware will have to ensure they have iasl installed.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
By merging PRSC and NTFY methods we simplify the code, improve
efficiency, and fix a bug where PRSC iterated 0-255 but NTDY could
only handle CPU numbers 0-127.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Keir Fraser
Xudong Hao
Roger Pau Monne
Anthony Perard
Keir Fraser