REX.R is ignored when considering segment register operands, and needs masking
out first.
While fixing this, reorder the user segments in x86_segment to match SReg3
encoding. This avoids needing a translation table between hardware ordering
and Xen's ordering.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
VMX: fix realmode emulation SReg handling
Commit 0888d36bb2 ("x86/emul: Correct the decoding of SReg3 operands")
overlooked three places where x86_seg_cs was assumed to be zero.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 0888d36bb2
master date: 2016-10-26 14:04:12 +0100
master commit: a62511bf14
master date: 2016-10-31 08:57:47 +0100
Otherwise besides mis-handling the instruction, the comparison failure
case would result in uninitialized stack data being handed back to the
guest in rDX:rAX (32 bits leaked for 32-bit guests, 96 bits for 64-bit
ones).
This is CVE-2016-9932 / XSA-200.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
* When the caller wants sexpr output, use `repr()'
This is what Xend expects.
The returned S-expressions are now escaped and quoted by Python,
generally using '...'. Previously kernel and ramdisk were unquoted
and args was quoted with "..." but without proper escaping. This
change may break toolstacks which do not properly dequote the
returned S-expressions.
* When the caller wants "simple" output, crash if the delimiter is
contained in the returned value.
With --output-format=simple it does not seem like this could ever
happen, because the bootloader config parsers all take line-based
input from the various bootloader config files.
With --output-format=simple0, this can happen if the bootloader
config file contains nul bytes.
This is CVE-2016-9379 and CVE-2016-9380 / XSA-198.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Tested-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 27e14d346e
master date: 2016-11-22 13:52:09 +0100
We must not emulate any instructions accessing respective registers
when either of these flags is set in the guest view of the register, or
else we may do so on data not belonging to the guest's current task.
Being architecturally required behavior, the logic gets placed in the
instruction emulator instead of hvmemul_get_fpu(). It should be noted,
though, that hvmemul_get_fpu() being the only current handler for the
get_fpu() callback, we don't have an active problem with CR4: Both
CR4.OSFXSR and CR4.OSXSAVE get handled as necessary by that function.
This is XSA-190.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
It is possible, when normalising a PV pagetable that the table has been freed
and reused for something else by the guest.
In such a case, data read might no longer be a pagetable, and fail the
truncation check. However, this should only be fatal if we encounter such a
page in the paused phase.
This check is now consistent with all other checks in the same area.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit a335a58e75)
(cherry picked from commit 7e17174735)
When specifying a serial list in domain config, users of
libxl_console_get_tty cannot get the tty path of a second specified pty serial,
since right now it always returns the tty path of serial 0.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 35dbf099ac)
(cherry picked from commit 822464961a)
Current code incorrectly adds 1 to full register instead of
incrementing the field in bits 15:12.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit a3336a5075)
(cherry picked from commit de781b47f4)
This is because libxl uses XEN_RUN_DIR to generate the socket path for
libxenstat while libxenstat itself uses hard-coded path, which is not
necessarily the same path as XEN_RUN_DIR. The default configuration
happened to work because XEN_RUN_DIR defaulted to /var/run/xen, which
matched the hard-coded path.
We should make libxenstat use XEN_RUN_DIR so that it works with
non-default configuration.
Generate a _paths.h because it is required to make this change work.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
(cherry picked from commit dedb221889)
(cherry picked from commit ab75cdf635)
Conflicts:
tools/xenstat/libxenstat/src/xenstat_qmp.c
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
When trying to use xl cpupool-numa-split and dom0 is limited to less
vcpus than one numa node the operation will fail.
Correct this by allowing this configuration.
Reported-by: Glenn Enright <glenn@rimuhosting.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit c256d2afc1)
(cherry picked from commit 78a3010381)
From systemd change log, since version 209, libsystemd.so contain
everything, including libsystemd-daemon.so. Distro may, or may not provide
the compatibility libraries which libsystemd-daemon is part of.
So, if libsystemd-daemon is not available, check for the presence of
a recent enough libsystemd.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
[ wei: run autogen.sh ]
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 7dec5b0c65)
XSA-180 provides a patch to QEMU to bodge QEMU logging issue. We
explicitly set the limit in libxl for 4.7.
Introduce a function for setting the environment variable and call it in
the right places.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit b0d409d9c4)
In "libxl: Do not trust backend for disk eject vdev" (c69871a2fb on
xen.git#staging) we changed libxl_evenable_disk_eject to read the
device vdev out of xenstore from the /libxl path, rather than the
backend path, and to read it during setup rather than on each event.
However, the patch has a mistake:
- GCSPRINTF("%s/dev", backend), NULL);
+ GCSPRINTF("%s/vdev", libxl_path), &configured_vdev);
^
Spot the extra "v". This causes configured_vdev always to be NULL.
configured_vdev is passed to [libxl__]strdup.
In Xen 4.6 and later libxl__strdup is used and tolerates NULL.
evg->vdev is set to NULL. This propagates to the `vdev' field in the
generated event. This may or may not cause further trouble, depending
on the calling application. In our osstest test cases it does not
cause any trouble, so the bug goes undetected.
In Xen 4.5 and earlier, the strdup does not tolerate NULL, and libxl
crashes immediately. This has been detected by osstest as a
regression in Xen 4.5.
IMO this patch should be applied immediately to
xen.git#staging-4.5 (to check that it fixes the osstest regression)
xen.git#staging (to check that it does not break master
Subject to passes, it should then be propagated to all supported
stable trees and also be mentioned in an update to XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
CC: security@xenproject.org
CC: Jan Beulich <jbeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 62b4d4769c)
Commit 56fb5fd623 ("libxl: adjust PoD target by memory fudge, too")
introduced target_memkb adjustment for HVM PoD domains on create,
wherein the value it wrote to target is always 1MiB lower than the
actual target_memkb. Unfortunately, on reboot, it is this value which
is read *unmodified* to feed into the next domain creation; from which
1MiB is subtracted *again*. This means that any guest which reboots
with memory < maxmem will have its memory target decreased by 1MiB on
every boot.
This patch makes it so that when reading target on reboot, we adjust the
value we read *up* by 1MiB, so that the domain will be build with the
appropriate amount of memory and the target will remain the same after
reboot.
This is still not quite a complete fix, as the 1MiB offset is only
subtracted when creating or rebooting; it is not subtracted when 'xl
set-memory' is called. But it will prevent any situations where memory
is continually increased or decreased. A better fix will have to wait
until after the release.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 7e81d992b1)
Rather than an open-coded sscanf. No functional change with correct
input.
This is a followup to XSA-175 and XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
When allocating a vdev for a new disk, look in /libxl/device, rather
than the frontends directory in xenstore.
This is more in line with the other parts of libxl, which ought not to
trust frontends. In this case, though, there is no security bug prior
to this patch because the frontend is the toolstack domain itself.
If libxl__alloc_vdev were ever changed to take a frontend domain
argument, this patch will fix a latent security bug.
This is a followup to XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Read the name from /libxl/device. Pass the /libxl path to
libxl__device_channel_from_xenstore.
This removes the final route by which READ_LIBXLDEV might receive a
backend path.
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
---
v2: Remove be_path variable which is now no longer used.
libxl_device_nic_list should use the /libxl path to search for
devices, and for obtaining the device information.
The "type" parameter was always "vif". Abolish it. (In any case,
paths in /libxl/device are named after the frontend type which is
constant, not the backend type which might in future vary.)
Abolish a redundant store to pnic->backend_domid. Before this commit,
that store was not needed because libxl_device_nic_init (called by
libxl__device_nic_from_xenstore) would zero it. Now it overwrites the
correct backend domid with zero; so remove it.
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
libxl_devid_to_device_nic should read the information it needs from
the /libxl/device path, not the backend.
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Fix the just-introduced bug in this macro: now it reads the
trustworthy libxl_path. Change the variable name in the two functions
(nic and channel) which use it.
Shuffling the bump in the carpet along, we now introduce three new
bugs: the three call sites pass a backend path where a frontend path
is expected.
No functional change.
This is part of XSA-178.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
We are going to want to change all the functions that use READ_BACKEND
to get untrustworthy information from the backend, to use trustworthy
information from /libxl.
This will involve replacing READ_BACKEND, which reads from be_path,
with a similar macro READ_LIBXLDEV, which reads from libxl_path.
The macro name change generates a lot of clutter in the diff. So we
break it out into this separate patch. Here, we rename the macro, but
the implementation does not really match the new name.
So, another way to look at this, is that we have transformed the bug:
* All of the backends use READ_BACKEND, which is unsafe
into the new bug:
* READ_LIBXLDEV actually reads be_path, which is unsafe.
There is no functional change as yet.
This is part of XSA-178.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
We are going to change these functions to expect, and be passed, a
/libxl path. So it is wrong that they are called _from_xs_be.
Neither function reads anything which isn't found in both places, so
we can and will change the call sites later.
The only remaining function in libxl called *_from_xs_be relates to
PCI devices, for which the backend domain is hardcoded to 0 throughout
the libxl_pci.c.
No functional change.
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Do not read the frontend path out of the backend. We have it in our
hand. Likewise the guest (frontend) domid was one of our parameters (!)
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Use the /libxl path where appropriate. Rename `path' variable to
`be_path' to make sure we caught all the occurrences.
Specifically, when checking that the device still exists, check the
`frontend' value in /libxl, rather than anything in the backend
directory.
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Do not read the frontend path out of the backend. We have it in our
hand. Likewise the guest (frontend) domid was one of our parameters (!)
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Rework libxl__device_disk_from_xs_be (which takes a backend path) into
to libxl__device_disk_from_xenstore (which takes a libxl path).
libxl__device_disk_from_xenstore now finds the backend path itself,
although it doesn't use it any more for most of its functions. We
rename the variable from be_path to backend_path to make sure we
didn't miss any cases.
All the data collection is now done by reading from the copy in
/libxl.
libxl_device_disk_list and its helper libxl__append_disk_list (which
used to be libxl__append_disk_list_of_type) need extensive rework,
because they now need to specify the /libxl path rather than the
backend path.
To do that they enumerate disks by looking in the appropriate area in
/libxl. Previously they scanned various of the backend directories in
dom0 (which was broken for driver domains). It is no longer necessary
to enumerate the various disk backends, because they all use the same
paths in /devices. libxl__device_disk_from_xenstore will parse the
type out of the backend path, for itself. (Indeed, it did so before -
the now-gone type parameter to libxl__append_disk_list_of_type wasn't
used other than to construct the directory to list.)
Finally, remove a redundant store to pdisk->backend_domid in
libxl__append_disk_list[_of_type]. Even before this commit, that
store was not needed because libxl_device_disk_init (called by
libxl__device_disk_from_xenstore) would zero it. Now it overwrites
the correct backend domid with zero; so remove it.
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
---
v2: Also fix up COLO reads, following rebase
For disk eject, use configured vdev from /libxl, not backend.
The backend directory is writeable by driver domains. This means that
a malicious driver domain could cause libxl to see a wrong vdev,
confusing the user or the toolstack.
Use the vdev from the /libxl space, rather than the backend.
For convenience, we read the vdev from the /libxl space into the evg
during setup and copy it on each event, rather than reading it afresh
each time (which would in any case involve generating or saving a copy
of the relevant /libxl path).
This is part of XSA-178.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Copy the new type and params values to /libxl, so that the information
in /libxl is kept up to date.
This is needed so that we can return this trustworthy information,
rather than trusting the backend-writeable parts of xenstore.
This is part of XSA-178.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Use uuid from /libxl, rather than from backend. I think the backend
is not supposed to change the uuid, since it seems to be set by libxl
during setup.
If in fact the backend is supposed to be able to change the uuid, this
patch needs to be dropped and replaced by a patch which makes the vtpm
uuid lookup tolerate bad or missing data.
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
* Do not check the backend for existence. We have already read the
/libxl path so know that the vtpm exists (or is supposed to); if the
backend doesn't exist then that must be the backend's doing.
* Get the frontend path from the /libxl directory.
* The frontend domid is the guest domid, and does not need to be read
from xenstore (!)
We still attempt to read the uuid from the backend. This will be
fixed in the next patch.
This is part of XSA-178.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
To determine whether a device is supposed to exist, look in /libxl,
rather than the backend.
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
We want to stop libxl trustingly reading information from the backend
directory (since this is, of course, writeable by the backend, which
might be a semi-trusted driver domain).
In principle it is wrong in current libxl for anything to try to
divine virtual device configuration from xenstore: the JSON domain
config ought to supply that, and xenstore should only tell us which
devices actually exist.
However:
Firstly, there are several existing places where configuration
information is retrieved from xenstore rather than JSON. We do not
want to reen gineer this in a security patch.
Secondly, we want to make a security patch which can be backported to
versions of libxl without the JSON configuration machinery.
So we take the expedient approach of keeping a copy of the
configuration somewhere we trust, namely /libxl. This is obviously
fairly low-risk, although it does write significantly more keys in
xenstore.
In this patch we make this change in libxl__device_generic_add. This
is responsible for actually writing the vast majority of device
information to xenstore. There are a few loose ends which will be
dealt with in a moment.
Likewise, changes to readers to use the new location will appear in
further patches.
This is part of XSA-178.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
libxl_device_channel_getinfo needs to examine devices without trusting
frontend-controlled data. So:
* Use /libxl to find the backend path.
* Parse the backend path to find the backend domid, rather than
reading it from the frontend.
* Tolerate FRONTEND/tty vanishing.
Note that there is a strange off-by-one error in the computation of
both fe_path and libxl_path in libxl_device_channel_getinfo: the
incoming channel->devid, which is copied to channelinfo->devid, has +1
applied to calculate the frontend path (and, after this patch, the
libxl path). I.e., the devid passed to libxl_device_channel_getinfo
must be one less than the actual devid for the device being asked
about.
This is actually a bug which mirrors a bug in
libxl__append_channel_list, which fills in the devids of the channel
devices it finds with sequentially increasing numbers starting at 0.
In the usual case channels have real devids starting at 1 (because
there is the console, which is devid 0, but not a channel). So these
bugs usually cancel out.
We do not address this problem at this time. This bug does not have
any security implications.
This patch is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
libxl_device_channel_list should not trust frontend-provided data.
So it needs to iterate using the /libxl paths, and read the backend
path out of /libxl.
However, it also filters out pure "consoles", which are channels
without a "name". But the name was stored only in the frontend
directory, which the frontend can delete.
So store the name in the backend too. (Ideally we would store it in
/libxl, where the backend can't write to it either, but
libxl__device_console_add not currently have access to the xenstore
transaction used by libxl__device_generic_add. Protection against the
backend will come later, in XSA-178.)
Because the libxl paths are defined to be in terms of the frontend
device types, not the backend device types, it is no longer correct
for libxl__append_channel_list to take a type argument. Abolish this
(with no functional effect).
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
libxl_device_nic_getinfo needs to examine devices without trusting
frontend-controlled data. So:
* Use /libxl to find the backend path.
* Parse the backend path to find the backend domid, rather than
reading it from the frontend.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Find the backend by reading the pointer in /libxl rather than in the
guest's frontend area.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
libxl_device_vtpm_getinfo needs to examine devices without trusting
frontend-controlled data. So:
* Use /libxl to find the backend path.
* Parse the backend path to find the backend domid, rather than
reading it from the frontend.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
libxl_device_vtpm_list needs to enumerate and identify devices without
trusting frontend-controlled data. So
* Use the /libxl path to enumerate vtpms.
* Use the /libxl path to find the corresponding backends.
* Parse the backend path to find the backend domid.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
* Rename the frontend variable to `fe_path' to check we caught them all
* Read the backend path from /libxl, rather than from the frontend
* Parse the backend domid from the backend path, rather than reading it
from the frontend (and add the appropriate error path and initialisation)
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Use the /libxl path for interpreting disk eject watch events: do not
read the backend path out of the frontend. Instead, use the version
in /libxl. That avoids us relying on the guest-modifiable
$frontend/backend pointer.
To implement this we store the path
/libxl/$guest/device/vbd/$devid/backend
in the evgen structure.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
When selecting the devid for a new device, we should look in
/libxl/device for existing devices, not in the frontend area.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
We need to enumerate the devices we have provided to a domain, without
trusting the guest-writeable (or, at least, guest-deletable) frontend
paths.
Instead, enumerate via, and read the backend path from, /libxl.
The console /libxl path is regular, so the special case for console 0
is not relevant any more: /libxl/GUEST/device/console/0 will be found,
and then libxl__device_destroy will DTRT to the right frontend path.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Multiple places in libxl need to figure out the backend domid of a
device. This can be discovered easily by looking at the backend path,
which always starts /local/domain/$backend_domid/.
There are no call sites yet.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
This gives us a record of all the backends we have set up for a
domain, which is separate from the frontends in
/local/domain/$DOMID/device.
In particular:
1. A guest has write permission for the frontend path:
/local/domain/$DOMID/device/$KIND/$DEVID
which means that the guest can completely delete the frontend.
(They can't recreate it because they don't have write permission
on the containing directory.)
2. A guest has write permission for the backend path recorded in the
frontend, ie, it can write to
/local/domain/$DOMID/device/$KIND/$DEVID/backend
which means that the guest can break the association between
frontend and backend.
So we can't rely on iterating over the frontends to find all the
backends, or examining a frontend to discover how a device is
configured.
So, have libxl__device_generic_add record the frontend and backend
paths in /libxl/$DOMID/device, and have libxl__device_destroy remove
them again.
Create the containing directory /libxl/GUEST/device in
libxl__domain_make. The already existing xs_rm in devices_destroy_cb
will take care of removing it.
This is part of XSA-175.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Fix errors like:
/local/work/xen.git/dist/install/usr/local/include/libxl_uuid.h:59:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
void static inline libxl_uuid_copy_0x040400(libxl_uuid *dst,
^
/local/work/xen.git/dist/install/usr/local/include/libxl_uuid.h:59:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]
/local/work/xen.git/dist/install/usr/local/include/libxl.h:1233:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
int static inline libxl_domain_create_restore_0x040200(
^
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
master commit: d5b6844942
master date: 2016-04-20 14:34:04 +0100
Doing a 'xl migrate --debug domU host' on xen-4.5 adds a
XC_SAVE_ID_ENABLE_VERIFY_MODE marker, which is not handled.
Since using --debug is valid usage, handle it by logging the fact
instead of aborting the migration.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 281962851f)
In case libxl__need_xenpv_qemu() returns an error let domain creation
fail.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 1a7ac00fa6)
The HVM parameter HVM_PARAM_X87_FIP_WIDTH to allow tools and the guest
to adjust the width of the FIP/FDP registers to be saved/restored by
the hypervisor. This is in case the hypervisor hueristics do not do
the right thing.
Add this parameter to the set saved during domain save/migrate.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
master commit: 5d768fb1f3
master date: 2016-02-26 12:30:11 +0100
Andrew Cooper
Jan Beulich
Ian Jackson
Marek Marczykowski-Górecki
Bob Liu
Boris Ostrovsky
Wei Liu
Juergen Gross
Anthony PERARD
Vitaly Kuznetsov
Roger Pau Monne
Olaf Hering
David Vrabel