When moving around a page via XENMAPSPACE_gmfn_range, deferring the TLB
flush for the "from" GFN range requires that the page remains allocated
to the guest until the TLB flush has actually occurred. Otherwise a
parallel hypercall to remove the page would only flush the TLB for the
GFN it has been moved to, but not the one is was mapped at originally.
This is part of XSA-346.
Fixes: cf95b2a9fd ("iommu: Introduce per cpu flag (iommu_dont_flush_iotlb) to avoid unnecessary iotlb... ")
Reported-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
master commit: 5777a3742d
master date: 2020-10-20 14:21:32 +0200
Deferring flushes to a single, wide range one - as is done when
handling XENMAPSPACE_gmfn_range - is okay only as long as
pages don't get freed ahead of the eventual flush. While the only
function setting the flag (xenmem_add_to_physmap()) suggests by its name
that it's only mapping new entries, in reality the way
xenmem_add_to_physmap_one() works means an unmap would happen not only
for the page being moved (but not freed) but, if the destination GFN is
populated, also for the page being displaced from that GFN. Collapsing
the two flushes for this GFN into just one (end even more so deferring
it to a batched invocation) is not correct.
This is part of XSA-346.
Fixes: cf95b2a9fd ("iommu: Introduce per cpu flag (iommu_dont_flush_iotlb) to avoid unnecessary iotlb... ")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Julien Grall <jgrall@amazon.com>
master commit: dea460d869
master date: 2020-10-20 14:21:09 +0200
map_pages_to_xen will attempt to coalesce mappings into 2MiB and 1GiB
superpages if possible, to maximize TLB efficiency. This means both
replacing superpage entries with smaller entries, and replacing
smaller entries with superpages.
Unfortunately, while some potential races are handled correctly,
others are not. These include:
1. When one processor modifies a sub-superpage mapping while another
processor replaces the entire range with a superpage.
Take the following example:
Suppose L3[N] points to L2. And suppose we have two processors, A and
B.
* A walks the pagetables, get a pointer to L2.
* B replaces L3[N] with a 1GiB mapping.
* B Frees L2
* A writes L2[M] #
This is race exacerbated by the fact that virt_to_xen_l[21]e doesn't
handle higher-level superpages properly: If you call virt_xen_to_l2e
on a virtual address within an L3 superpage, you'll either hit a BUG()
(most likely), or get a pointer into the middle of a data page; same
with virt_xen_to_l1 on a virtual address within either an L3 or L2
superpage.
So take the following example:
* A reads pl3e and discovers it to point to an L2.
* B replaces L3[N] with a 1GiB mapping
* A calls virt_to_xen_l2e() and hits the BUG_ON() #
2. When two processors simultaneously try to replace a sub-superpage
mapping with a superpage mapping.
Take the following example:
Suppose L3[N] points to L2. And suppose we have two processors, A and B,
both trying to replace L3[N] with a superpage.
* A walks the pagetables, get a pointer to pl3e, and takes a copy ol3e pointing to L2.
* B walks the pagetables, gets a pointre to pl3e, and takes a copy ol3e pointing to L2.
* A writes the new value into L3[N]
* B writes the new value into L3[N]
* A recursively frees all the L1's under L2, then frees L2
* B recursively double-frees all the L1's under L2, then double-frees L2 #
Fix this by grabbing a lock for the entirety of the mapping update
operation.
Rather than grabbing map_pgdir_lock for the entire operation, however,
repurpose the PGT_locked bit from L3's page->type_info as a lock.
This means that rather than locking the entire address space, we
"only" lock a single 512GiB chunk of hypervisor address space at a
time.
There was a proposal for a lock-and-reverify approach, where we walk
the pagetables to the point where we decide what to do; then grab the
map_pgdir_lock, re-verify the information we collected without the
lock, and finally make the change (starting over again if anything had
changed). Without being able to guarantee that the L2 table wasn't
freed, however, that means every read would need to be considered
potentially unsafe. Thinking carefully about that is probably
something that wants to be done on public, not under time pressure.
This is part of XSA-345.
Reported-by: Hongyan Xia <hongyxia@amazon.com>
Signed-off-by: Hongyan Xia <hongyxia@amazon.com>
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 1ce75e99d7
master date: 2020-10-20 14:20:19 +0200
xmalloc() & Co may not be called with IRQs off, or else check_lock()
will have its assertion trigger about locks getting acquired
inconsistently. Re-arranging the locking in evtchn_send() doesn't seem
very reasonable, especially since the per-channel lock was introduced to
avoid acquiring the per-domain event lock on the send paths. Issue a
second call to xsm_evtchn_send() instead, before acquiring the lock, to
give XSM / Flask a chance to pre-allocate whatever it may need.
As these nodes are used merely for caching earlier decisions' results,
allocate just one node in AVC code despite two potentially being needed.
Things will merely be not as performant if a second allocation was
wanted, just like when the pre-allocation fails.
Fixes: c0ddc86348 ("evtchn: convert per-channel lock to be IRQ-safe")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
master commit: 52e1fc47ab
master date: 2020-10-02 08:36:21 +0200
Like for evtchn_destroy() looping over all possible event channels to
close them can take a significant amount of time. Unlike done there, we
can't alter domain properties (i.e. d->valid_evtchns) here. Borrow, in a
lightweight form, the paging domctl continuation concept, redirecting
the continuations to different sub-ops. Just like there this is to be
able to allow for predictable overall results of the involved sub-ops:
Racing requests should either complete or be refused.
Note that a domain can't interfere with an already started (by a remote
domain) reset, due to being paused. It can prevent a remote reset from
happening by leaving a reset unfinished, but that's only going to affect
itself.
This is part of XSA-344.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Especially closing of fully established interdomain channels can take
quite some time, due to the locking involved. Therefore we shouldn't
assume we can clean up still active ports all in one go. Besides adding
the necessary preemption check, also avoid pointlessly starting from
(or now really ending at) 0; 1 is the lowest numbered port which may
need closing.
Since we're now reducing ->valid_evtchns, free_xen_event_channel(),
and (at least to be on the safe side) notify_via_xen_event_channel()
need to cope with attempts to close / unbind from / send through already
closed (and no longer valid, as per port_is_valid()) ports.
This is part of XSA-344.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Neither d->evtchn_port_ops nor max_evtchns(d) may be used in an entirely
lock-less manner, as both may change by a racing evtchn_reset(). In the
common case, at least one of the domain's event lock or the per-channel
lock needs to be held. In the specific case of the inter-domain sending
by evtchn_send() and notify_via_xen_event_channel() holding the other
side's per-channel lock is sufficient, as the channel can't change state
without both per-channel locks held. Without such a channel changing
state, evtchn_reset() can't complete successfully.
Lock-free accesses continue to be permitted for the shim (calling some
otherwise internal event channel functions), as this happens while the
domain is in effectively single-threaded mode. Special care also needs
taking for the shim's marking of in-use ports as ECS_RESERVED (allowing
use of such ports in the shim case is okay because switching into and
hence also out of FIFO mode is impossihble there).
As a side effect, certain operations on Xen bound event channels which
were mistakenly permitted so far (e.g. unmask or poll) will be refused
now.
This is part of XSA-343.
Reported-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
... in order for send_guest_{global,vcpu}_virq() to be able to make use
of it.
This is part of XSA-343.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
While the function closes all ports, it does so without holding any
lock, and hence racing requests may be issued causing new ports to get
opened. This would have been problematic in particular if such a newly
opened port had a port number above the new implementation limit (i.e.
when switching from FIFO to 2-level) after the reset, as prior to
"evtchn: relax port_is_valid()" this could have led to e.g.
evtchn_close()'s "BUG_ON(!port_is_valid(d2, port2))" to trigger.
Introduce a counter of active ports and check that it's (still) no
larger then the number of Xen internally used ones after obtaining the
necessary lock in evtchn_reset().
As to the access model of the new {active,xen}_evtchns fields - while
all writes get done using write_atomic(), reads ought to use
read_atomic() only when outside of a suitably locked region.
Note that as of now evtchn_bind_virq() and evtchn_bind_ipi() don't have
a need to call check_free_port().
This is part of XSA-343.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The recording of d->max_evtchns in evtchn_2l_init(), in particular with
the limited set of callers of the function, is insufficient. Neither for
PV nor for HVM guests the bitness is known at domain_create() time, yet
the upper bound in 2-level mode depends upon guest bitness. Recording
too high a limit "allows" x86 32-bit domains to open not properly usable
event channels, management of which (inside Xen) would then result in
corruption of the shared info and vCPU info structures.
Keep the upper limit dynamic for the 2-level case, introducing a helper
function to retrieve the effective limit. This helper is now supposed to
be private to the event channel code. The used in do_poll() and
domain_dump_evtchn_info() weren't consistent with port uses elsewhere
and hence get switched to port_is_valid().
Furthermore FIFO mode's setup_ports() gets adjusted to loop only up to
the prior ABI limit, rather than all the way up to the new one.
Finally a word on the change to do_poll(): Accessing ->max_evtchns
without holding a suitable lock was never safe, as it as well as
->evtchn_port_ops may change behind do_poll()'s back. Using
port_is_valid() instead widens some the window for potential abuse,
until we've dealt with the race altogether (see XSA-343).
This is XSA-342.
Reported-by: Julien Grall <jgrall@amazon.com>
Fixes: 48974e6ce5 ("evtchn: use a per-domain variable for the max number of event channels")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Julien Grall <jgrall@amazon.com>
While the allocation of a bucket is always performed with the per-domain
lock, the bucket may be accessed without the lock taken (for instance, see
evtchn_send()).
Instead such sites relies on port_is_valid() to return a non-zero value
when the port has a struct evtchn associated to it. The function will
mostly check whether the port is less than d->valid_evtchns as all the
buckets/event channels should be allocated up to that point.
Unfortunately a compiler is free to re-order the assignment in
evtchn_allocate_port() so it would be possible to have d->valid_evtchns
updated before the new bucket has finish to allocate.
Additionally on Arm, even if this was compiled "correctly", the
processor can still re-order the memory access.
Add a write memory barrier in the allocation side and a read memory
barrier when the port is valid to prevent any re-ordering issue.
This is XSA-340.
Reported-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
There is at least one path (SYSENTER with NT set, Xen converts to #GP) which
ends up injecting the #GP fault twice, first in compat_sysenter(), and then a
second time in compat_test_all_events(), due to the stale TBF_EXCEPTION left
in TRAPBOUNCE_flags.
The guest kernel sees the second fault first, which is a kernel level #GP
pointing at the head of the #GP handler, and is therefore a userspace
trigger-able DoS.
This particular bug has bitten us several times before, so rearrange
{compat_,}create_bounce_frame() to clobber TRAPBOUNCE on success, rather than
leaving this task to one area of code which isn't used uniformly.
Other scenarios which might result in a double injection (e.g. two calls
directly to compat_create_bounce_frame) will now crash the guest, which is far
more obvious than letting the kernel run with corrupt state.
This is XSA-339
Fixes: fdac951560 ("x86: clear EFLAGS.NT in SYSENTER entry path")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
To avoid ports potentially becoming invalid behind the back of certain
other functions (due to ->max_evtchn shrinking) because of
- a guest invoking evtchn_reset() and from a 2nd vCPU opening new
channels in parallel (see also XSA-343),
- alloc_unbound_xen_event_channel() produced channels living above the
2-level range (see also XSA-342),
drop the max_evtchns check from port_is_valid(). For a port for which
the function once returned "true", the returned value may not turn into
"false" later on. The function's result may only depend on bounds which
can only ever grow (which is the case for d->valid_evtchns).
This also eliminates a false sense of safety, utilized by some of the
users (see again XSA-343): Without a suitable lock held, d->max_evtchns
may change at any time, and hence deducing that certain other operations
are safe when port_is_valid() returned true is not legitimate. The
opportunities to abuse this may get widened by the change here
(depending on guest and host configuration), but will be taken care of
by the other XSA.
This is XSA-338.
Fixes: 48974e6ce5 ("evtchn: use a per-domain variable for the max number of event channels")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Julien Grall <jgrall@amazon.com>
When assigned to less trusted or un-trusted guests, devices may change
state behind our backs (they may e.g. get reset by means we may not know
about). Therefore we should avoid reading BARs from hardware once a
device is no longer owned by Dom0. Furthermore when we can't read a BAR,
or when we read zero, we shouldn't instead use the caller provided
address unless that caller can be trusted.
Re-arrange the logic in msix_capability_init() such that only Dom0 (and
only if the device isn't DomU-owned yet) or calls through
PHYSDEVOP_prepare_msix will actually result in the reading of the
respective BAR register(s). Additionally do so only as long as in-use
table entries are known (note that invocation of PHYSDEVOP_prepare_msix
counts as a "pseudo" entry). In all other uses the value already
recorded will get used instead.
Clear the recorded values in _pci_cleanup_msix() as well as on the one
affected error path. (Adjust this error path to also avoid blindly
disabling MSI-X when it was enabled on entry to the function.)
While moving around variable declarations (in many cases to reduce their
scopes), also adjust some of their types.
This is part of XSA-337.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
It's safer and faster to just use the cached last written
(untranslated) MSI message stored in msi_desc for the single user that
calls read_msi_msg.
This also prevents relying on the data read from the device MSI
registers in order to figure out the index into the IOMMU interrupt
remapping table, which is not safe.
This is part of XSA-337.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Requested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The current vPT code will migrate the emulated timers between vCPUs
(change the pt->vcpu field) while just holding the destination lock,
either from create_periodic_time or pt_adjust_global_vcpu_target if
the global target is adjusted. Changing the periodic_timer vCPU field
in this way creates a race where a third party could grab the lock in
the unlocked region of pt_adjust_global_vcpu_target (or before
create_periodic_time performs the vcpu change) and then release the
lock from a different vCPU, creating a locking imbalance.
Introduce a per-domain rwlock in order to protect periodic_time
migration between vCPU lists. Taking the lock in read mode prevents
any timer from being migrated to a different vCPU, while taking it in
write mode allows performing migration of timers across vCPUs. The
per-vcpu locks are still used to protect all the other fields from the
periodic_timer struct.
Note that such migration shouldn't happen frequently, and hence
there's no performance drop as a result of such locking.
This is XSA-336.
Reported-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Tested-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This MSR doesn't exist on AMD hardware, and switching away from the safe
functions in the common MSR path was an erroneous change.
Partially revert the change.
This is XSA-333.
Fixes: 4fdc932b3c ("x86/Intel: drop another 32-bit leftover")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Currently a guest is able to register any guest physical address to use
for the vcpu_info structure as long as the structure can fits in the
rest of the frame.
This means a guest can provide an address that is not aligned to the
natural alignment of the structure.
On Arm 32-bit, unaligned access are completely forbidden by the
hypervisor. This will result to a data abort which is fatal.
On Arm 64-bit, unaligned access are only forbidden when used for atomic
access. As the structure contains fields (such as evtchn_pending_self)
that are updated using atomic operations, any unaligned access will be
fatal as well.
While the misalignment is only fatal on Arm, a generic check is added
as an x86 guest shouldn't sensibly pass an unaligned address (this
would result to a split lock).
This is XSA-327.
Reported-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
master commit: 3fdc211b01
master date: 2020-07-07 14:41:00 +0200
Modifications made to the page tables by EPT code need to be written
to memory when the page tables are shared with the IOMMU, as Intel
IOMMUs can be non-coherent and thus require changes to be written to
memory in order to be visible to the IOMMU.
In order to achieve this make sure data is written back to memory
after writing an EPT entry when the recalc bit is not set in
atomic_write_ept_entry. If such bit is set, the entry will be
adjusted and atomic_write_ept_entry will be called a second time
without the recalc bit set. Note that when splitting a super page the
new tables resulting of the split should also be written back.
Failure to do so can allow devices behind the IOMMU access to the
stale super page, or cause coherency issues as changes made by the
processor to the page tables are not visible to the IOMMU.
This allows to remove the VT-d specific iommu_pte_flush helper, since
the cache write back is now performed by atomic_write_ept_entry, and
hence iommu_iotlb_flush can be used to flush the IOMMU TLB. The newly
used method (iommu_iotlb_flush) can result in less flushes, since it
might sometimes be called rightly with 0 flags, in which case it
becomes a no-op.
This is part of XSA-321.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: c23274fd04
master date: 2020-07-07 14:40:11 +0200
Some VT-d IOMMUs are non-coherent, which requires a cache write back
in order for the changes made by the CPU to be visible to the IOMMU.
This cache write back was unconditionally done using clflush, but there are
other more efficient instructions to do so, hence implement support
for them using the alternative framework.
This is part of XSA-321.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: a64ea16522
master date: 2020-07-07 14:39:54 +0200
It's based on alternative_io_2 without inputs or outputs but with an
added memory clobber.
This is part of XSA-321.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: 23570bce00
master date: 2020-07-07 14:39:25 +0200
Current code in sync_cache assume that the address passed in is
aligned to a cache line size. Fix the code to support passing in
arbitrary addresses not necessarily aligned to a cache line size.
This is part of XSA-321.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: b6d9398144
master date: 2020-07-07 14:39:05 +0200
The hook is only implemented for VT-d and it uses the already existing
iommu_sync_cache function present in VT-d code. The new hook is
added so that the cache can be flushed by code outside of VT-d when
using shared page tables.
Note that alloc_pgtable_maddr must use the now locally defined
sync_cache function, because IOMMU ops are not yet setup the first
time the function gets called during IOMMU initialization.
No functional change intended.
This is part of XSA-321.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 91526b460e
master date: 2020-07-07 14:38:34 +0200
Rename __iommu_flush_cache to iommu_sync_cache and remove
iommu_flush_cache_page. Also remove the iommu_flush_cache_entry
wrapper and just use iommu_sync_cache instead. Note the _entry suffix
was meaningless as the wrapper was already taking a size parameter in
bytes. While there also constify the addr parameter.
No functional change intended.
This is part of XSA-321.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 62298825b9
master date: 2020-07-07 14:38:13 +0200
Do not limit PSI flushes to order 0 pages, in order to avoid doing a
full TLB flush if the passed in page has an order greater than 0 and
is aligned. Should increase the performance of IOMMU TLB flushes when
dealing with page orders greater than 0.
This is part of XSA-321.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: 5fe515a0fe
master date: 2020-07-07 14:37:46 +0200
ept_next_level was passing a live PTE pointer to ept_set_middle_entry,
which was then modified without taking into account that the PTE could
be part of a live EPT table. This wasn't a security issue because the
pages returned by p2m_alloc_ptp are zeroed, so adding such an entry
before actually initializing it didn't allow a guest to access
physical memory addresses it wasn't supposed to access.
This is part of XSA-328.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: bc3d9f95d6
master date: 2020-07-07 14:37:12 +0200
ept_split_super_page() wants to further modify the newly allocated
table, so have ept_set_middle_entry() return the mapped pointer rather
than tearing it down and then getting re-established right again.
Similarly ept_next_level() wants to hand back a mapped pointer of
the next level page, so re-use the one established by
ept_set_middle_entry() in case that path was taken.
Pull the setting of suppress_ve ahead of insertion into the higher level
table, and don't have ept_split_super_page() set the field a 2nd time.
This is part of XSA-328.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: 1104288186
master date: 2020-07-07 14:36:52 +0200
This originally was "mfn_x(mfn) == INVALID_MFN". Make it like this
again, taking the opportunity to also drop the unnecessary nearby
braces.
This is XSA-319.
Fixes: 246a5a3377 ("xen: Use a typesafe to define INVALID_MFN")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 23a216f99d
master date: 2020-07-07 14:36:24 +0200
Currently, get_free_port() is assuming that the port has been allocated
when evtchn_allocate_port() is not return -EBUSY.
However, the function may return an error when:
- We exhausted all the event channels. This can happen if the limit
configured by the administrator for the guest ('max_event_channels'
in xl cfg) is higher than the ABI used by the guest. For instance,
if the guest is using 2L, the limit should not be higher than 4095.
- We cannot allocate memory (e.g Xen has not more memory).
Users of get_free_port() (such as EVTCHNOP_alloc_unbound) will validly
assuming the port was valid and will next call evtchn_from_port(). This
will result to a crash as the memory backing the event channel structure
is not present.
Fixes: 368ae9a05f ("xen/pvshim: forward evtchn ops between L0 Xen and L2 DomU")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 2e9c2bc292
master date: 2020-07-07 14:35:36 +0200
RDRAND/RDSEED can be hidden using cpuid= to mitigate SRBDS if microcode
isn't available.
This is part of XSA-320 / CVE-2020-0543.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 7028534d84)
gcc-8.1 complains:
| xentop.c: In function 'print':
| xentop.c:304:4: error: 'vwprintw' is deprecated [-Werror=deprecated-declarations]
| vwprintw(stdscr, (curses_str_t)fmt, args);
| ^~~~~~~~
vw_printw (note the underscore) is a non-deprecated alternative.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit 2b50cdbc44)
See patch documentation and comments.
This is part of XSA-320 / CVE-2020-0543
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 6a49b9a792)
It turns out that a bug (since forever) in Xen causes XSAVE records to have
non-architectural behaviour on xsave-capable hardware, when a PV guest has not
touched the state.
In such a case, the data record returned from Xen is 2*uint64_t, both claiming
the (illegitimate) state of %xcr0 and %xcr0_accum being 0.
Adjust the bound in handle_x86_pv_vcpu_blob() to cope with this.
Fixes: 2a62c22715 "libxc/restore: Fix data auditing in handle_x86_pv_vcpu_blob()"
Reported-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
(cherry picked from commit 0729830cc4)
(cherry picked from commit d2aecd86c4)
(cherry picked from commit e43fc14ec5)
The current logic only works by chance, in that XSAVE records also tend to be
a multiple of 128. Implement the missing logic for XSAVE.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
(cherry picked from commit 2a62c22715)
(cherry picked from commit 0e2bbcf8b4)
(cherry picked from commit 288872ad3b)
handle_x86_pv_info() has a subtle bug. It uses an 'else if' chain with a
clause in the middle which doesn't exit unconditionally. In practice, this
means that when restoring a 32bit PV guest, later sanity checks are skipped.
Rework the logic a little to be simpler. There are exactly two valid
combinations of fields in X86_PV_INFO, so factor this out and check them all
in one go, before making adjustments to the current domain.
Once adjustments have been completed successfully, sanity check the result
against the X86_PV_INFO settings in one go, rather than piece-wise.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
(cherry picked from commit aafae0e800)
(cherry picked from commit 5932ee1e06)
(cherry picked from commit 275475f1e8)
The Expected and Got values are rendered in the wrong order.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
(cherry picked from commit f50a4f6e24)
(cherry picked from commit 7b2225078b)
(cherry picked from commit 66998bdd52)
Commit 562a1c0f7e ("tools/xenstore: dont unlink connection object
twice") introduced a potential use after free problem in
domain_cleanup(): after calling talloc_unlink() for domain->conn
domain->conn is set to NULL. The problem is that domain is registered
as talloc child of domain->conn, so it might be freed by the
talloc_unlink() call.
With Xenstore being single threaded there are normally no concurrent
memory allocations running and freeing a virtual memory area normally
doesn't result in that area no longer being accessible. A problem
could occur only in case either a signal received results in some
memory allocation done in the signal handler (SIGHUP is a primary
candidate leading to reopening the log file), or in case the talloc
framework would do some internal memory allocation during freeing of
the memory (which would lead to clobbering of the freed domain
structure).
Fixes: 562a1c0f7e ("tools/xenstore: dont unlink connection object twice")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit bb2a34fd74)
(cherry picked from commit dc5176d0f9)
(cherry picked from commit a997ffe678)
The field 'sdss' was named 'dmss' before, commit 3148bebbf0 did the
renamed but didn't update the comment.
Fixes: 3148bebbf0 ("libxl: rename a field in libxl__domain_create_state")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 035c4d7716)
(cherry picked from commit 5351a0a170fc7f6290d7d3d8be302d53d2426a87)
(cherry picked from commit d1c9822b88)
The CONTROL command (former DEBUG command) isn't specified in the
xenstore protocol doc. Add it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Backport: 4.9+
(cherry picked from commit f910c3ebc6)
(cherry picked from commit daf71f0053)
DIRECTORY_PART was missing in docs/misc/xenstore.txt. Add it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Backport: 4.9+
(cherry picked from commit 94a0252c10)
(cherry picked from commit 5c1b607e8a)
The XSA-226 fix was flawed - the backwards transformation on rc was done
too early, causing a continuation to not get invoked when the need for
preemption was determined at the very first iteration of the request.
This in particular means that all of the status fields of the individual
operations would be left untouched, i.e. set to whatever the caller may
or may not have initialized them to.
This is part of XSA-318.
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
master commit: d6f22d5d9e
master date: 2020-04-14 14:42:32 +0200
Part of XSA-295 (c/s 863e74eb2c) inadvertently re-positioned the brackets,
changing the logic. If the _set_status() call fails, the grant_map hypercall
would fail with a status of 1 (rc != GNTST_okay) instead of the expected
negative GNTST_* error.
This error path can be taken due to bad guest state, and causes net/blk-back
in Linux to crash.
This is XSA-316.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
master commit: da0c66c8f4
master date: 2020-04-14 14:41:02 +0200
The rwlock unlock paths are using atomic_sub() to release the lock.
However the implementation of atomic_sub() rightfully doesn't contain a
memory barrier. On Arm, this means a processor is allowed to re-order
the memory access with the preceeding access.
In other words, the unlock may be seen by another processor before all
the memory accesses within the "critical" section.
The rwlock paths already contains barrier indirectly, but they are not
very useful without the counterpart in the unlock paths.
The memory barriers are not necessary on x86 because loads/stores are
not re-ordered with lock instructions.
So add arch_lock_release_barrier() in the unlock paths that will only
add memory barrier on Arm.
Take the opportunity to document each lock paths explaining why a
barrier is not necessary.
This is XSA-314.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: 6890a04072
master date: 2020-04-14 14:37:11 +0200
Since a shared buffer can be written to by the guest, we may only read
the head and tail pointers from there (all other fields should only ever
be written to). Furthermore, for any particular operation the two values
must be read exactly once, with both checks and consumption happening
with the thus read values. (The backtrace related xenoprof_buf_space()
use in xenoprof_log_event() is an exception: The values used there get
re-checked by every subsequent xenoprof_add_sample().)
Since that code needed touching, also fix the double increment of the
lost samples count in case the backtrace related xenoprof_add_sample()
invocation in xenoprof_log_event() fails.
Where code is being touched anyway, add const as appropriate, but take
the opportunity to entirely drop the now unused domain parameter of
xenoprof_buf_space().
This is part of XSA-313.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Wei Liu <wl@xen.org>
master commit: 50ef9a3cb2
master date: 2020-04-14 14:33:19 +0200
alloc_xenheap_pages() making use of MEMF_no_scrub is fine for Xen
internally used allocations, but buffers allocated to be shared with
(unpriviliged) guests need to be zapped of their prior content.
This is part of XSA-313.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wl@xen.org>
master commit: 0763a7ebfc
master date: 2020-04-14 14:32:33 +0200
There is a bug in commit 5e4b419966 ("xen: credit2: only reset
credit on reset condition"). In fact, the aim of that commit was to
make sure that we do not perform too many credit reset operations
(which are not super cheap, and in an hot-path). But the check used
to determine whether a reset is necessary was the wrong one.
In fact, knowing just that some vCPUs have been skipped, while
traversing the runqueue (in runq_candidate()), is not enough. We
need to check explicitly whether the first vCPU in the runqueue
has a negative amount of credit.
Since a trace record is changed, this patch updates xentrace format file
and xenalyze as well
This should be backported.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
master commit: dae7b62e97
master date: 2020-04-03 10:46:53 +0200
Jan Beulich
Hongyan Xia
Wei Liu
Julien Grall
Andrew Cooper
Roger Pau Monné
Christopher Clark
Juergen Gross
Anthony PERARD
Ross Lagerwall
Dario Faggioli