Update connection record details:
- make flags common for sockets and domains (makes it easier to have a
C union for conn-spec)
- add pending incoming data (needed for handling partially read
requests when doing live update)
- add partial response length (needed for proper split to individual
responses after live update)
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Clang doesn't support attribute error, and the possible equivalents
like diagnose_if don't seem to work well in this case as they trigger
when when the function is not called (just by being used by the
APPEND_CALL macro).
Define nocall to a noop on clang until a proper solution can be found.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
[jb: error -> __error__]
Acked-by: Jan Beulich <jbeulich@suse.com>
Both SHDEPS_libxendevicemodel and SHDEPS_libxenhypfs have a bug by
adding $(SHLIB_xencall) instead of $(SHLIB_libxencall).
The former seems not to have any negative impact, probably because
it is not used anywhere in Xen without the correct $(SHLIB_libxencall)
being used, too.
Fixes: 86234eafb9 ("libs: add libxenhypfs")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Juergen Gross <jgross@suse.com>
Note that FPU selector handling as well as MXCSR mask saving for now
does not honor differences between host and guest visible featuresets.
While for Intel operation of the insns with CR4.OSFXSR=0 is
implementation dependent, use the easiest solution there: Simply don't
look at the bit in the first place. For AMD and alike the behavior is
well defined, so it gets handled together with FFXSR.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
While the Intel SDM claims that FRSTOR itself may raise #MF upon
completion, this was confirmed by Intel to be a doc error which will be
corrected in due course; behavior is like FLDENV, and like old hard copy
manuals describe it.
Re-arrange a switch() statement's case label order to allow for
fall-through from FLDENV handling to FNSTENV's.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
To avoid introducing another boolean into emulator state, the
rex_prefix field gets (ab)used to convey the real/VM86 vs protected mode
info (affecting structure layout, albeit not size) to x86_emul_blk().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Note that the ISA extensions document revision 038 doesn't specify
exception behavior for ModRM.mod == 0b11; assuming #UD here.
No tests are being added to the harness - this would be quite hard,
we can't just issue the insns against RAM. Their similarity with
MOVDIR64B should have the test case there be god enough to cover any
fundamental flaws.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a new blk() hook, paralleling the rmw() one in a certain way,
but being intended for larger data sizes, and hence its HVM intermediate
handling function doesn't fall back to splitting the operation if the
requested virtual address can't be mapped.
Note that SDM revision 071 doesn't specify exception behavior for
ModRM.mod == 0b11; assuming #UD here.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Andrew Cooper <andrew.cooper@citrix.com>
In a pure PV environment (the PV shim in particular) we don't really
need emulation of all these. To limit #ifdef-ary utilize some of the
CASE_*() macros we have, by providing variants expanding to
(effectively) nothing (really a label, which in turn requires passing
-Wno-unused-label to the compiler when build such configurations).
Due to the mixture of macro and #ifdef use, the placement of some of
the #ifdef-s is a little arbitrary.
The resulting object file's .text is less than half the size of the
original, and looks to also be compiling a little more quickly.
This is meant as a first step; more parts can likely be disabled down
the road.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Bregrudingly-acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
x86emul_is_mem_{access,write}() (and their interaction with
x86_decode()) have become sufficiently complex that we should have a way
to test this logic. Start by covering legacy encoded GPR insns, with the
exception of a few the main emulator doesn't support yet (left as
comments in the respective tables, or about to be added by subsequent
patches). This has already helped spot a few flaws in said logic,
addressed by (revised) earlier patches.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Unlike similarly encoded insns these don't write their memory operands,
and hence x86_is_mem_write() should return false for them. However,
rather than adding special logic there, rework how their emulation gets
done, by making decoding attributes properly describe the r/o nature of
their memory operands:
- change the table entries for opcodes 0x38 and 0x39, with no other
adjustments to the attributes later on,
- for the other opcodes, leave the table entries as they are, and
override the attributes for the specific sub-cases (identified by
ModRM.reg).
For opcodes 0x38 and 0x39 the change of the table entries implies
changing the order of operands as passed to emulate_2op_SrcV(), hence
the splitting of the cases in the main switch().
Note how this also allows dropping custom LOCK prefix checks.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
First of all explain in comments what the functions' purposes are. Then
make them actually match their comments.
Note that fc6fa977be ("x86emul: extend x86_insn_is_mem_write()
coverage") didn't actually fix the function's behavior for {,V}STMXCSR:
Both are covered by generic code higher up in the function, due to
x86_decode_twobyte() already doing suitable adjustments. And VSTMXCSR
wouldn't have been covered anyway without a further X86EMUL_OPC_VEX()
case label. Keep the inner case label in a comment for reference.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
domain_crash() should always have a message which is emitted even in release
builds, so something more useful than this is presented to the user.
(XEN) domain_crash called from io.c:171
(XEN) domain_crash called from io.c:171
(XEN) domain_crash called from io.c:171
...
To avoid possibly printing stack rubble, initialise data to ~0 right away.
Furthermore, the maximum access size is 4, so drop data from long to int.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The functionality of XEN_SYSCTL_set_parameter is available via hypfs
now, so it can be removed.
This allows to remove the kernel_param structure for runtime parameters
by putting the now only used structure element into the hypfs node
structure of the runtime parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Instead of xc_set_parameters() use xenhypfs_write() for setting
parameters of the hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Add support to read and modify values of hypervisor runtime parameters
via the hypervisor file system.
As runtime parameters can be modified via a sysctl, too, this path has
to take the hypfs rw_lock as writer.
For custom runtime parameters the connection between the parameter
value and the file system is done via an init function which will set
the initial value (if needed) and the leaf properties.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Add the /buildinfo/config entry to the hypervisor filesystem. This
entry contains the .config file used to build the hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Provide version and compile information in /buildinfo/ node of the
Xen hypervisor file system. As this information is accessible by dom0
only no additional security problem arises.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
gcc 4.1 has problems with static initializers for anonymous unions.
Fix this by naming the union in struct hypfs_entry_leaf.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Jan Beulich <jbeulich@suse.com>
Add the infrastructure for the hypervisor filesystem.
This includes the hypercall interface and the base functions for
entry creation, deletion and modification.
In order not to have to repeat the same pattern multiple times in case
adding a new node should BUG_ON() failure, the helpers for adding a
node (hypfs_add_dir() and hypfs_add_leaf()) get a nofault parameter
causing the BUG() in case of a failure.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
On the 2019 Xen developer summit there was agreement that the Xen
hypervisor should gain support for a hierarchical name-value store
similar to the Linux kernel's sysfs.
In the beginning there should only be basic support: entries can be
added from the hypervisor itself only, there is a simple hypercall
interface to read the data.
Add a feature document for setting the base of a discussion regarding
the desired functionality and the entries to add.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Add a new script xen/tools/binfile for including a binary file at build
time being usable via a pointer and a size variable in the hypervisor.
Make use of that generic tool in xsm.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Specifically, Fedora 29, Archlinux, and Debian unstable. This will
cause the CI loop to detect golang build failures.
CentOS 6 and 7 don't have golang packages, and the packages in
stretch, jessie, xenial, and trusty are too old.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
This fixes the following build error in hvmloader:
usr/include/gnu/stubs.h:7:11: fatal error: gnu/stubs-32.h: No such file or directory
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
The original build setup used a "fake GOPATH" in tools/golang to test
the mechanism of building from go package files installed on a
filesystem. With the move to modules, this isn't necessary, and leads
to potentially confusing directories being created. (I.e., it might
not be obvious that files under tools/golang/src shouldn't be edited.)
Get rid of the code that creates this (now unused) intermediate
directory. Add direct dependencies from 'build' onto the source
files.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
The generated golang bindings (types.gen.go and helpers.gen.go) are
left checked in so that they can be fetched from xenbits using the
golang tooling. This means that they must be updated whenever
libxl_types.idl (or other dependencies) are updated. However, the
golang bindings are only built optionally; we can't assume that anyone
updating libxl_types.idl will also descend into the tools/golang tree
to re-generate the bindings.
Fix this by re-generating the golang bindings from the libxl Makefile
when the IDL dependencies are updated, so that anyone who updates
libxl_types.idl will also end up updating the golang generated files
as well.
- Make a variable for the generated files, and a target in
xenlight/Makefile which will only re-generate the files.
- Add a target in libxl/Makefile to call external idl generation
targets (currently only golang).
For ease of testing, also add a specific target in libxl/Makefile just
to check and update files generated from the IDL.
This does mean that there are two potential paths for generating the
files during a parallel build; but that shouldn't be an issue, since
tools/golang/xenlight should never be built until after tools/libxl
has completed building anyway.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
For lbr_tsx_fixup_check() simply name a few more specific erratum
numbers.
For bdf93_fixup_check(), however, more models are affected. Oddly enough
despite being the same model and stepping, the erratum is listed for
Xeon E3 but not its Core counterpart. Apply the workaround uniformly,
and also for Xeon D, which only has the LBR-from one listed in its spec
update.
Seeing this broader applicability, rename anything BDF93-related to more
generic names.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
It is wrong for us to check the base address when there's no LDT in the
first place. Once we don't do this check anymore we can also set the
base address to a non-canonical value when the LDT is empty.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
iomem_permit_access should be called for MMIO regions of devices
assigned to a domain. Currently it is not called for MMIO regions of
passthrough devices of Dom0less guests. This patch fixes it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Julien Grall <julien@xen.org>
During boot, load_system_tables() is used in reinit_bsp_stack() to switch the
virtual addresses used from their .data/.bss alias, to their directmap alias.
The structure assignment is implemented as a memset() to zero first, then a
copy-in of the new data. This causes the NMI/#MC stack pointers to
transiently become 0, at a point where we may have an NMI watchdog running.
Rewrite the logic using a volatile tss pointer (equivalent to, but more
readable than, using ACCESS_ONCE() for all writes).
This does drop the zeroing side effect for holes in the structure, but the
backing memory for the TSS is fully zeroed anyway, and architecturally, they
are all reserved.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
It is unclear whether mem_sharing was ever made to work on other architectures
but at this time the only verified platform for it is vmx. No plans to support
or maintain it on other architectures. Make this explicit by checking during
initialization.
Signed-off-by: Tamas K Lengyel <tamas@tklengyel.com>
Reviewed-by: Wei Liu <wl@xen.org>
Inspired by Linux commit c49a0a80137c7ca7d6ced4c812c9e07a949f6f24:
There have been reports of RDRAND issues after resuming from suspend on
some AMD family 15h and family 16h systems. This issue stems from a BIOS
not performing the proper steps during resume to ensure RDRAND continues
to function properly.
Update the CPU initialization to clear the RDRAND CPUID bit for any family
15h and 16h processor that supports RDRAND. If it is known that the family
15h or family 16h system does not have an RDRAND resume issue or that the
system will not be placed in suspend, the "cpuid=rdrand" kernel parameter
can be used to stop the clearing of the RDRAND CPUID bit.
Note, that clearing the RDRAND CPUID bit does not prevent a processor
that normally supports the RDRAND instruction from executing it. So any
code that determined the support based on family and model won't #UD.
Warn if no explicit choice was given on affected hardware.
Check RDRAND functions at boot as well as after S3 resume (the retry
limit chosen is entirely arbitrary).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The logic is completely undocumented and almost impossible to follow. It
actually uses return oriented programming. Rewrite it to conform to more
normal call mechanics, and leave a big comment explaining thing. As well as
the code being easier to follow, it will execute faster as it isn't fighting
the branch predictor.
Move the ioemul_handle_quirk() function pointer from traps.c to
ioport_emulate.c. There is no reason for it to be in neither of the two
translation units which use it. Alter the behaviour to return the number of
bytes written into the stub.
Introduce a new nocall annotation using __attribute__((error)) to prohibit
calls being made.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
`go build` wants to add the current go version to go.mod as the
minimum every time we run `make` in the directory. Add 1.11 (the
earliest Go version that supports modules) there to make it happy.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
When compiling with SHOPT_OUT_OF_SYNC disabled, the build fails with:
common.c:41:12: error: ‘sh_remove_write_access_from_sl1p’ declared ‘static’ but never defined [-Werror=unused-function]
static int sh_remove_write_access_from_sl1p(struct domain *d, mfn_t gmfn,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
due to an unguarded forward declaration.
It turns out there is no need to forward declare
sh_remove_write_access_from_sl1p() to begin with, so move it to just ahead of
its first user, which is within a larger #ifdef'd SHOPT_OUT_OF_SYNC block.
Fix up for style while moving it. No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
In case opt_ept_ad has not been set explicitly by the user via command
line or runtime parameter, it is treated as "no" on Avoton cpus.
Change that handling by setting opt_ept_ad to 0 for this cpu type
explicitly if no user value has been set.
By putting this into the (renamed) boot time initialization of vmcs.c
_vmx_cpu_up() can be made static.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
The raspberry PI 4 has devices that can only DMA into the first GB of
the RAM. Therefore we want allocate as much as possible memory below 1GB
for dom0.
Use the recently introduced dma_bitsize field to specify the DMA width
supported.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reported-by: Corey Minyard <minyard@acm.org>
Tested-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, Xen is assuming that all the devices are at least 32-bit
DMA capable. However, some SoCs have devices that may be able to access
a much restricted range. For instance, the Raspberry PI 4 has devices
that can only access the first GB of RAM.
The function arch_get_dma_bit_size() will return the lowest DMA width on
the platform. Use it to decide what is the limit for the low memory.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, Xen is assuming that all the devices are at least 32-bit
DMA capable. However, some SoC have devices that may be able to access
a much restricted range. For instance, the RPI has devices that can
only access the first 1GB of RAM.
The structure platform_desc is now extended to allow a platform to
override the DMA width. The new is used to implement
arch_get_dma_bit_size().
The prototype is now moved in asm-arm/mm.h as the function is not NUMA
specific. The implementation is done in platform.c so we don't have to
include platform.h everywhere. This should be fine as the function is
not expected to be called in hotpath.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
When generating documentation, pkg.go.dev and godoc.org assume a comment
that immediately precedes the package declaration is a "package
comment", and should be shown in the documentation. Add an empty line
after the DO NOT EDIT comment in generated files to prevent these
comments from appearing as "package comments."
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
The 'T' debugkey reliably wedges on one of my systems, which has a sparse
APIC_ID layout due to a non power-of-2 number of cores per socket. The
per_cpu(dt_cpu_data, cpu) calcution falls over the deliberately non-canonical
poison value.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This bug was first discovered against Haswell. It is definitely affected.
(The XenServer ticket for this bug was opened on 2013-05-30 which is coming up
on 7 years old, and predates Broadwell).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Juergen Gross