Both SHDEPS_libxendevicemodel and SHDEPS_libxenhypfs have a bug by
adding $(SHLIB_xencall) instead of $(SHLIB_libxencall).
The former seems not to have any negative impact, probably because
it is not used anywhere in Xen without the correct $(SHLIB_libxencall)
being used, too.
Fixes: 86234eafb9 ("libs: add libxenhypfs")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Juergen Gross <jgross@suse.com>
Note that FPU selector handling as well as MXCSR mask saving for now
does not honor differences between host and guest visible featuresets.
While for Intel operation of the insns with CR4.OSFXSR=0 is
implementation dependent, use the easiest solution there: Simply don't
look at the bit in the first place. For AMD and alike the behavior is
well defined, so it gets handled together with FFXSR.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
While the Intel SDM claims that FRSTOR itself may raise #MF upon
completion, this was confirmed by Intel to be a doc error which will be
corrected in due course; behavior is like FLDENV, and like old hard copy
manuals describe it.
Re-arrange a switch() statement's case label order to allow for
fall-through from FLDENV handling to FNSTENV's.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
To avoid introducing another boolean into emulator state, the
rex_prefix field gets (ab)used to convey the real/VM86 vs protected mode
info (affecting structure layout, albeit not size) to x86_emul_blk().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Note that the ISA extensions document revision 038 doesn't specify
exception behavior for ModRM.mod == 0b11; assuming #UD here.
No tests are being added to the harness - this would be quite hard,
we can't just issue the insns against RAM. Their similarity with
MOVDIR64B should have the test case there be god enough to cover any
fundamental flaws.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce a new blk() hook, paralleling the rmw() one in a certain way,
but being intended for larger data sizes, and hence its HVM intermediate
handling function doesn't fall back to splitting the operation if the
requested virtual address can't be mapped.
Note that SDM revision 071 doesn't specify exception behavior for
ModRM.mod == 0b11; assuming #UD here.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Andrew Cooper <andrew.cooper@citrix.com>
x86emul_is_mem_{access,write}() (and their interaction with
x86_decode()) have become sufficiently complex that we should have a way
to test this logic. Start by covering legacy encoded GPR insns, with the
exception of a few the main emulator doesn't support yet (left as
comments in the respective tables, or about to be added by subsequent
patches). This has already helped spot a few flaws in said logic,
addressed by (revised) earlier patches.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The functionality of XEN_SYSCTL_set_parameter is available via hypfs
now, so it can be removed.
This allows to remove the kernel_param structure for runtime parameters
by putting the now only used structure element into the hypfs node
structure of the runtime parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Instead of xc_set_parameters() use xenhypfs_write() for setting
parameters of the hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Add the infrastructure for the hypervisor filesystem.
This includes the hypercall interface and the base functions for
entry creation, deletion and modification.
In order not to have to repeat the same pattern multiple times in case
adding a new node should BUG_ON() failure, the helpers for adding a
node (hypfs_add_dir() and hypfs_add_leaf()) get a nofault parameter
causing the BUG() in case of a failure.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
The original build setup used a "fake GOPATH" in tools/golang to test
the mechanism of building from go package files installed on a
filesystem. With the move to modules, this isn't necessary, and leads
to potentially confusing directories being created. (I.e., it might
not be obvious that files under tools/golang/src shouldn't be edited.)
Get rid of the code that creates this (now unused) intermediate
directory. Add direct dependencies from 'build' onto the source
files.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
The generated golang bindings (types.gen.go and helpers.gen.go) are
left checked in so that they can be fetched from xenbits using the
golang tooling. This means that they must be updated whenever
libxl_types.idl (or other dependencies) are updated. However, the
golang bindings are only built optionally; we can't assume that anyone
updating libxl_types.idl will also descend into the tools/golang tree
to re-generate the bindings.
Fix this by re-generating the golang bindings from the libxl Makefile
when the IDL dependencies are updated, so that anyone who updates
libxl_types.idl will also end up updating the golang generated files
as well.
- Make a variable for the generated files, and a target in
xenlight/Makefile which will only re-generate the files.
- Add a target in libxl/Makefile to call external idl generation
targets (currently only golang).
For ease of testing, also add a specific target in libxl/Makefile just
to check and update files generated from the IDL.
This does mean that there are two potential paths for generating the
files during a parallel build; but that shouldn't be an issue, since
tools/golang/xenlight should never be built until after tools/libxl
has completed building anyway.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
`go build` wants to add the current go version to go.mod as the
minimum every time we run `make` in the directory. Add 1.11 (the
earliest Go version that supports modules) there to make it happy.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Nick Rosbrook <rosbrookn@ainfosec.com>
When generating documentation, pkg.go.dev and godoc.org assume a comment
that immediately precedes the package declaration is a "package
comment", and should be shown in the documentation. Add an empty line
after the DO NOT EDIT comment in generated files to prevent these
comments from appearing as "package comments."
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
The {evex} pseudo prefix gets rejected by gas for insns not allowing
EVEX encoding. Except there's a gas bug due to which its check gets
bypassed for insns without operands. Let's not rely on that bug to
remain there.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
c/s 7efd9f3d45 ("libxl: Handle Linux stubdomain specific QEMU
options.") modified libl_types.idl. Run gengotypes.py again to update
the geneated golang bindings.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
This patch fix "multiple definition of `xprintf'" (or xgt_handle)
build error with GCC 10.1.0.
These are the error reported:
gcc xs_tdb_dump.o utils.o tdb.o talloc.o -o xs_tdb_dump
/usr/bin/ld: utils.o:./utils.h:27: multiple definition of `xprintf'; xs_tdb_dump.o:./utils.h:27: first defined here
[...]
gcc xenstored_core.o xenstored_watch.o xenstored_domain.o xenstored_transaction.o xenstored_control.o xs_lib.o talloc.o utils.o tdb.o hashtable.o xenstored_posix.o -lsystemd -Wl,-rpath-link=... ../libxc/libxenctrl.so -lrt -o xenstored
/usr/bin/ld: xenstored_watch.o:./xenstored_core.h:207: multiple definition of `xgt_handle'; xenstored_core.o:./xenstored_core.h:207: first defined here
/usr/bin/ld: xenstored_domain.o:./xenstored_core.h:207: multiple definition of `xgt_handle'; xenstored_core.o:./xenstored_core.h:207: first defined here
/usr/bin/ld: xenstored_transaction.o:./xenstored_core.h:207: multiple definition of `xgt_handle'; xenstored_core.o:./xenstored_core.h:207: first defined here
/usr/bin/ld: xenstored_control.o:./xenstored_core.h:207: multiple definition of `xgt_handle'; xenstored_core.o:./xenstored_core.h:207: first defined here
/usr/bin/ld: xenstored_posix.o:./xenstored_core.h:207: multiple definition of `xgt_handle'; xenstored_core.o:./xenstored_core.h:207: first defined here
A difference that I noticed with earlier version of the build chain is
that before, I had:
$ nm xs_tdb_dump.o | grep xprintf
0000000000000008 C xprintf
And now, it's:
0000000000000000 B xprintf
With the patch apply, the symbol isn't in xs_tdb_dump.o anymore.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Just out of context is the following comment for libxl__domain_make:
/* fixme: this function can leak the stubdom if it fails */
When the stubdomain kernel or ramdisk is not present, the domid and
stubdomain name will indeed be leaked. Avoid the leak by checking the
file presence and erroring out when absent. It doesn't fix all cases,
but it avoids a big one when using a linux device model stubdomain.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Qemu supports only 4 emulated IDE disks, when given more (or with higher
indexes), it will fail to start. Since the disks can still be accessible
using PV interface, just ignore emulated path and log a warning, instead
of rejecting the configuration altogether.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Device model stubdomains (both Mini-OS + qemu-trad and linux + qemu-xen)
are always started with at least 3 consoles: log, save, and restore.
Until xenconsoled learns how to handle multiple consoles, this is needed
for save/restore support.
For Mini-OS stubdoms, this is a bug. In practice, it works in most
cases because there is something else that triggers qemu in dom0 too:
vfb/vkb added if vnc/sdl/spice is enabled.
Additionally, Linux-based stubdomain waits for all the backends to
initialize during boot. Lack of some console backends results in
stubdomain startup timeout.
This is a temporary patch until xenconsoled will be improved.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
[Updated commit message with Marek's explanation from mailing list.]
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Access to QMP of QEMU in Linux stubdomain is possible over vchan
connection. Handle the actual vchan connection in a separate process
(vchan-socket-proxy). This simplified integration with QMP (already
quite complex), but also allows preliminary filtering of (potentially
malicious) QMP input.
Since only one client can be connected to vchan server at the same time
and it is not enforced by the libxenvchan itself, additional client-side
locking is needed. It is implicitly implemented by vchan-socket-proxy,
as it handle only one connection at a time. Note that qemu supports only
one simultaneous client on a control socket anyway (but in UNIX socket
case, it enforce it server-side), so it doesn't add any extra
limitation.
libxl qmp client code already has locking to handle concurrent access
attempts to the same qemu qmp interface.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Squash in changes of regenerated autotools files.
Kill the vchan-socket-proxy so we don't leak the daemonized processes.
libxl__stubdomain_is_linux_running() works against the guest_domid, but
the xenstore path is beneath the stubdomain. This leads to the use of
libxl_is_stubdom in addition to libxl__stubdomain_is_linux_running() so
that the stubdomain calls kill for the qmp-proxy.
Also call libxl__qmp_cleanup() to remove the unix sockets used by
vchan-socket-proxy. vchan-socket-proxy only creates qmp-libxl-$domid,
and libxl__qmp_cleanup removes that as well as qmp-libxenstat-$domid.
However, it tolerates ENOENT, and a stray qmp-libxenstat-$domid should
not exist.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Move kill_device_model to libxl__kill_xs_path so we have a helper to
kill a process from a pid stored in xenstore. We'll be using it to kill
vchan-qmp-proxy.
libxl__kill_xs_path takes a "what" string for use in printing error
messages. kill_device_model is retained in libxl_dm.c to provide the
string.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add a simple proxy for tunneling socket connection over vchan. This is
based on existing vchan-node* applications, but extended with socket
support. vchan-socket-proxy serves both as a client and as a server,
depending on parameters. It can be used to transparently communicate
with an application in another domian that normally expose UNIX socket
interface. Specifically, it's written to communicate with qemu running
within stubdom.
Server mode listens for vchan connections and when one is opened,
connects to a pointed UNIX socket. Client mode listens on UNIX
socket and when someone connects, opens a vchan connection. Only
a single connection at a time is supported.
Additionally, socket can be provided as a number - in which case it's
interpreted as already open FD (in case of UNIX listening socket -
listen() needs to be already called). Or "-" meaning stdin/stdout - in
which case it is reduced to vchan-node2 functionality.
Example usage:
1. (in dom0) vchan-socket-proxy --mode=client <DOMID>
/local/domain/<DOMID>/data/vchan/1234 /run/qemu.(DOMID)
2. (in DOMID) vchan-socket-proxy --mode=server 0
/local/domain/<DOMID>/data/vchan/1234 /run/qemu.(DOMID)
This will listen on /run/qemu.(DOMID) in dom0 and whenever connection is
made, it will connect to DOMID, where server process will connect to
/run/qemu.(DOMID) there. When client disconnects, vchan connection is
terminated and server vchan-socket-proxy process also disconnects from
qemu.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Rely on a wrapper script in stubdomain to attach relevant consoles to
qemu. The save console (1) must be attached to fdset/1. When
performing a restore, $STUBDOM_RESTORE_INCOMING_ARG must be replaced on
the qemu command line by "fd:$FD", where $FD is an open file descriptor
number to the restore console (2).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Address TODO in dm_state_save_to_fdset: Only remove savefile for
non-stubdom.
Use $STUBDOM_RESTORE_INCOMING_ARG instead of fd:3 and update commit
message.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Let the server know when the client is connected. Otherwise server will
notice only when client send some data.
This change does not break existing clients, as libvchan user should
handle spurious notifications anyway (for example acknowledge of remote
side reading the data).
Cc: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Replace spaces with tabs to match the file's whitespace.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This allows using arguments with spaces, like -append, without
nominating any special "separator" character.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Write arguments in dm-argv directory instead of overloading mini-os's
dmargs string.
Make libxl__write_stub_dmargs vary behaviour based on the
is_linux_stubdom flag.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Whenever python scripts are install, have the shebang be modified to use
whatever PYTHON_PATH is. This is useful for system where python isn't available, or
where the package build tools prevent unversioned shebang.
INSTALL_PYTHON_PROG only looks for "#!/usr/bin/env python".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
This allows to use install-wrap when the source scripts is in a
subdirectory.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
This patch creates an appropriate command line for the QEMU instance
running in a Linux-based stubdomain.
NOTE: a number of items are not currently implemented for Linux-based
stubdomains, such as:
- save/restore
- QMP socket
- graphics output (e.g., VNC)
Signed-off-by: Eric Shelton <eshelton@pobox.com>
Simon:
* fix disk path
* fix cdrom path and "format"
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
[drop Qubes-specific parts]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Allow setting stubdomain_ramdisk independently from stubdomain_kernel
Add a qemu- prefix for qemu-stubdom-linux-{kernel,rootfs} since stubdom
doesn't convey device-model. Use qemu- since this code is qemu specific.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Do not prohibit anymore using stubdomain with qemu-xen.
To help distingushing MiniOS and Linux stubdomain, add helper inline
functions libxl__stubdomain_is_linux() and
libxl__stubdomain_is_linux_running(). Those should be used where really
the difference is about MiniOS/Linux, not qemu-xen/qemu-xen-traditional.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When qemu is running in stubdomain, any attempt to initialize vnc/sdl
there will crash it (on failed attempt to load a keymap from a file). If
vfb is present, all those cases are skipped. But since
b053f0c4c9 "libxl: do not start dom0 qemu
for stubdomain when not needed" it is possible to create a stubdomain
without vfb and contrary to the comment -vnc none do trigger VNC
initialization code (just skips exposing it externally).
Change the implicit SDL avoiding method to -nographics option, used when
none of SDL or VNC is enabled.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Use also HOSTCFLAGS for biossums while touching the code.
Spotted by inspecting build logfile.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
While it should have been this way from the beginning, not doing so will
become an actual problem with PVH Dom0. The interface change is binary
compatible, but requires tools side producers to be re-built.
Drop the bogus/unnecessary page alignment restriction on the input
buffer at the same time.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
There's nothing to be done by the emulator, as we unconditionally abort
any XBEGIN.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The XS_INTRODUCE command has two parameters: the mfn (or better: gfn)
of the domain's xenstore ring page and the event channel of the
domain for communicating with Xenstore.
The gfn is not really needed. It is stored in the per-domain struct
in xenstored and in case of another XS_INTRODUCE for the domain it
is tested to match the original value. If it doesn't match the
command is aborted via EINVAL, otherwise the event channel to the
domain is recreated.
As XS_INTRODUCE is limited to dom0 and there is no real downside of
recreating the event channel just omit the test for the gfn to
match and don't return EINVAL for multiple XS_INTRODUCE calls.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Users of EMBEDDED_EXTRA_CFLAGS already use -fno-asynchronous-unwind-tables, or
ought to. This shrinks the size of the rombios 32bit stubs in guest memory.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
xc_cpuid_apply_policy() is gaining extra parameters to untangle CPUID
complexity in Xen. While an improvement in general, it does have the
unfortunate side effect of duplicating some settings across multiple
parameters.
Rearrange the logic to only consider 'pae' if no explicit featureset is
provided. This reduces the complexity for callers who have already provided a
pae setting in the featureset.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Paul Durrant <pdurrant@amzn.com>
Acked-by: Wei Liu <wl@xen.org>
Add a README and package comment giving a brief overview of the package.
These also help pkg.go.dev generate better documentation.
Also, add a copy of the LGPL (the same license used by libxl) to
tools/golang/xenlight. This is required for the package to be shown
on pkg.go.dev and added to the default module proxy, proxy.golang.org.
Finally, add an entry for the xenlight package to SUPPORT.md.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Initialize the xenlight Go module using the xenbits git-http URL,
xenbits.xenproject.org/git-http/xen.git/tools/golang/xenlight.
Also simplify the build Make target by using `go build` instead of `go
install`, and do not set GOPATH here because it is now unnecessary.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Commit df669de074 un-tracked the generated
Go code, but it was decided that we actually keep the generated code
in-tree.
Undo the changes to ignore the generated code, and re-generate it.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Many exported functions in xenlight require a domid as an argument. Make
it easier for package users to use these functions by adding wrappers
for the libxl utility functions libxl_name_to_domid and
libxl_domid_to_name.
Signed-off-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Juergen Gross
Jan Beulich
George Dunlap
Nick Rosbrook
Anthony PERARD
Jason Andryuk
Marek Marczykowski-Górecki
Eric Shelton
Olaf Hering
Andrew Cooper