Whenever python scripts are install, have the shebang be modified to use
whatever PYTHON_PATH is. This is useful for system where python isn't available, or
where the package build tools prevent unversioned shebang.
INSTALL_PYTHON_PROG only looks for "#!/usr/bin/env python".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
There's nothing to be done by the emulator, as we unconditionally abort
any XBEGIN.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The CET spec has been published and guest kernels are starting to get support.
Introduce the CPUID and MSRs, and fully block the MSRs from guest use.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
For now, write the same content for both. Update the users of the
initialisers to use the new name, and extend xen-cpuid to dump both default
and max featuresets.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Just as with c/s 96dc77b4b1 for XEN_SYSCTL_get_cpu_policy,
XEN_SYSCTL_get_cpu_featureset wants to become conditional.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Policy objects aren't tiny, and the derivation logic isn't trivial. We are
about to increase the number of policy objects, so will have the opportunity
to drop logic and storage space based on CONFIG_{PV,HVM}.
Start by causing XEN_SYSCTL_get_cpu_policy to fail with -EOPNOTSUPP when
requesting data for a compiled-out subsystem. Update xen-cpuid to cope and
continue to further system policies, seeing as the indicies are interleaved.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
A splitlock is an atomic operation which crosses a cache line boundary. It
serialises operations in the cache coherency fabric and comes with a
multi-thousand cycle stall.
Intel Tremont CPUs introduce MSR_CORE_CAPS to enumerate various core-specific
features, and MSR_TEST_CTRL to adjust the behaviour in the case of a
splitlock.
Virtualising this for guests is distinctly tricky owing to the fact that
MSR_TEST_CTRL has core rather than thread scope. In the meantime however,
prevent the MSR values leaking into guests.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wl@xen.org>
Quoting the respective Linux commit:
Intel Xeons from Ivy Bridge onwards support a processor identification
number set in the factory. To the user this is a handy unique number to
identify a particular CPU. Intel can decode this to the fab/production
run to track errors. On systems that have it, include it in the machine
check record. I'm told that this would be helpful for users that run
large data centers with multi-socket servers to keep track of which CPUs
are seeing errors.
Newer AMD CPUs support this too, at different MSR numbers.
Take the opportunity and hide __MC_NMSRS from the public interface going
forward.
[Linux commit 3f5a7896a5096fd50030a04d4c3f28a7441e30a5]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Extend the livepatch list operation to fetch also payloads' metadata.
This is achieved by extending the sysctl list interface with 2 extra
guest handles:
* metadata - an array of arbitrary size strings
* metadata_len - an array of metadata strings' lengths (uin32_t each)
Payloads' metadata is a string of arbitrary size and does not have an
upper bound limit. It may also vary in size between payloads.
In order to let the userland allocate enough space for the incoming
data add a metadata total size field to the list sysctl operation and
fill it with total size of all payloads' metadata.
Extend the libxc to handle the metadata back-to-back data transfers
as well as metadata length array data transfers.
The xen-livepatch userland tool is extended to always display the
metadata for each received module. The metadata is received with the
following format: key=value\0key=value\0...key=value\0. The format is
modified to the following one: key=value;key=value;...key=value.
The new format allows to easily parse the metadata for a given module
by a machine.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Reviewed-by: Norbert Manthey <nmanthey@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
The payloads' name strings can be of arbitrary size (typically small
with an upper bound of XEN_LIVEPATCH_NAME_SIZE).
Current implementation of the list operation interface allows to copy
names in the XEN_LIVEPATCH_NAME_SIZE chunks regardless of its actual
size and enforces space allocation requirements on userland tools.
To unify and simplify the interface, handle the name strings of
arbitrary size by copying them in adhering chunks to the userland.
In order to let the userland allocate enough space for the incoming
data add an auxiliary interface xc_livepatch_list_get_sizes() that
provides the current number of payload entries and the total size of
all name strings. This is achieved by extending the sysctl list
interface with an extra fields: name_total_size.
The xc_livepatch_list_get_sizes() issues the livepatch sysctl list
operation with the nr field set to 0. In this mode the operation
returns the number of payload entries and calculates the total sizes
for all payloads' names.
When the sysctl operation is issued with a non-zero nr field (for
instance with a value obtained earlier with the prior call to the
xc_livepatch_list_get_sizes()) the new field name_total_size provides
the total size of actually copied data.
Extend the libxc to handle the name back-to-back data transfers.
The xen-livepatch tool is modified to start the list operation with a
call to the xc_livepatch_list_get_sizes() to obtain the actual number
of payloads as well as the necessary space for names.
The tool now always requests the actual number of entries and leaves
the preemption handling to the libxc routine. The libxc still returns
'done' and 'left' parameters with the same semantic allowing the tool
to detect anomalies and react to them. At the moment it is expected
that the tool receives the exact number of entries as requested.
The xen-livepatch tool has been also modified to handle the name
back-to-back transfers correctly.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Bjoern Doebel <doebel@amazon.de>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
By default Livepatch enforces the following buildid-based dependency
chain between livepatch modules:
1) first module depends on given hypervisor buildid
2) every consecutive module depends on previous module's buildid
This way proper livepatch stack order is maintained and enforced.
While it is important for production livepatches it limits agility and
blocks usage of testing or debug livepatches. These kinds of livepatch
modules are typically expected to be loaded at any time irrespective
of current state of the modules stack.
To enable testing and debug livepatches allow user dynamically ignore
the inter-modules dependency. In this case only hypervisor buildid
match is verified and enforced.
To allow userland pass additional paremeters for livepatch actions
add support for action flags.
Each of the apply, revert, unload and revert action gets additional
32-bit parameter 'flags' where extra flags can be applied in a mask
form.
Initially only one flag '--nodeps' is added for the apply action.
This flag modifies the default buildid dependency check as described
above.
The global sysctl interface input flag parameter is defined with a
single corresponding flag macro:
LIVEPATCH_ACTION_APPLY_NODEPS (1 << 0)
The userland xen-livepatch tool is modified to support the '--nodeps'
flag for apply and load commands. A general mechanism for specifying
more flags in the future for apply and other action is however added.
Signed-off-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Andra-Irina Paraschiv <andraprs@amazon.com>
Reviewed-by: Eslam Elnikety <elnikety@amazon.de>
Reviewed-by: Petre Eftime <epetre@amazon.com>
Reviewed-by: Leonard Foerster <foersleo@amazon.de>
Reviewed-by: Martin Pohlack <mpohlack@amazon.de>
Reviewed-by: Norbert Manthey <nmanthey@amazon.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
I was (mistakenly, as - looking at the code - it's clearly not intended
to work) passing the tool "Raw" and "Host" as command line arguments.
Avoid printing just "Raw " with not even a newline at the end in
such a case. Instead report what wasn't understood by the parsing logic.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
AMD Pre-Fam17h CPUs "optimise" {F,}X{SAVE,RSTOR} by not saving/restoring
FOP/FIP/FDP if an x87 exception isn't pending. This causes an information
leak, CVE-2006-1056, and worked around by several OSes, including Xen. AMD
Fam17h CPUs no longer have this leak, and advertise so in a CPUID bit.
Introduce the RSTR_FP_ERR_PTRS feature, as specified by AMD, and expose to all
guests by default. While adjusting libxl's cpuid table, add CLZERO which
looks to have been omitted previously.
Also introduce an X86_BUG bit to trigger the (F)XRSTOR workaround, and set it
on AMD hardware where RSTR_FP_ERR_PTRS is not advertised. Optimise the
conditions for the workaround paths.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Rev 037 of Intel's ISA extensions document does not state intercept
behavior for the insn (I've been unofficially told that the distinction
is going to be by exit qualification, as I would have assumed
considering that this way it's sufficiently transparent to unaware
software, as using WBINVD in place of WBNOINVD is always correct, just
less efficient). Similarly AMD's PM volume 2 version 3.31 only states
that both use the same VMEXIT, but not how to distinugish them (other
than by decoding the insn). Therefore in the HVM case for now it'll be
backed by the same ->wbinvd_intercept() handlers.
Use this occasion and also add the two missing table entries for
CLDEMOTE, which doesn't require any further changes to make work.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Make handling in do_pm_op() more homogeneous: Before interpreting
op->cpuid as such, handle all operations not acting on a particular
CPU. Also expose the setting via xenpm.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
While the MWAIT idle driver already takes it to mean an actual C state,
the ACPI idle driver so far used it as a list index. The list index,
however, is an implementation detail of Xen and affected by firmware
settings (i.e. not necessarily uniform for a particular system).
While touching this code also avoid invoking menu_get_trace_data()
when tracing is not active. For consistency do this also for the
MWAIT driver.
Note that I'm intentionally not adding any sorting logic to set_cx():
Before and after this patch we assume entries to arrive in order, so
this would be an orthogonal change.
Take the opportunity and add minimal documentation for the command line
option.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The AVX512_BF16 feature flag resides in this so far blank sub-leaf.
Expand infrastructure accordingly.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The MD_CLEAR feature can be automatically offered to guests. No
infrastructure is needed in Xen to support the guest making use of it.
This is part of XSA-297, CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Remove all tmem related code in libxc.
Leave some stubs in libxl in case anyone has linked to those functions
before the removal.
Remove all tmem related commands in xl, all tmem related code in other
utilities we ship.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The majority of the static tables is never written to. Add const where
possible.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently, a user can in principle combine the output of `xl info -n`, the
APCI tables, and some manual CPUID data to figure out which CPU numbers to
feed into `xen-hptool cpu-offline` to effectively disable SMT at runtime.
A more convenient option is to teach Xen how to perform this action.
Extend XEN_SYSCTL_cpu_hotplug with two new operations. Introduce a new
smt_up_down_helper() which wraps the cpu_{up,down}_helper() helpers with logic
which understands siblings based on their APIC_ID.
Add libxc stubs, and extend xen-hptool with smt-{enable,disable} options.
These are intended to be shorthands for a loop over cpu-{online,offline}.
To simplify the implemention, they will strictly enable/disable secondary
siblings (those with a non-zero thread id). This functionality is intended
for use in production scenarios where debugging options such as `maxcpus=` or
other manual plug/unplug configuration has not been used.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Bring libxl's in line with the public header, and update xen-cpuid's to
the latest information available in Intel's documentation (SDM ver 068
and ISA extensions ver 035), with (as before) the exception on MAWAU.
Some pre-existing strings get changed to match SDM naming. This should
be benign in xen-cpuid, and I hope it's also acceptable in libxl, where
people actually using the slightly wrong names would have to update
their guest config files.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The CPUID bit and MSR are deliberately not exposed to guests, because they
won't exist on newer processors. As vPMU isn't security supported, the
misbehaviour of PCR3 isn't expected to impact production deployments.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This utility can't possibly work with modern Xen setup: none of the
sysfs path used (under /sys/devices/xen-backend) is documented as
stable ABI in upstream Linux kernel.
Archaeology shows that the path used could have been part of the
xenolinux fork which never got upstreamed.
Its utility is zero nowadays. Drop it.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
xen-bugtool relies on code that has been removed in commit 9e8672f1c3
"tools: remove xend and associated python modules", more than 5 years
ago. Remove it, since it confuses users.
-$ /usr/sbin/xen-bugtool
Traceback (most recent call last):
File "/usr/sbin/xen-bugtool", line 9, in <module>
from xen.util import bugtool
ImportError: No module named xen.util
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=866380
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
In almost all cases, Xen and libxc will agree on the featureset length,
because they are built from the same source.
However, there are circumstances (e.g. security hotfixes) where the featureset
gets longer and dom0 will, after installing updates, be running with an old
Xen but new libxc. Despite writing the code with this scenario in mind, there
were some bugs.
First, xen-cpuid's get_featureset() erroneously allocates a buffer based on
Xen's featureset length, but records libxc's length, which may be longer.
In this situation, the hypercall bounce buffer code reads/writes the recorded
length, which is beyond the end of the allocated object, and a later free()
encounters corrupt heap metadata. Fix this by recording the same length that
we allocate.
Secondly, get_cpuid_domain_info() has a related bug when the passed-in
featureset is a different length to libxc's.
A large amount of the libxc cpuid functionality depends on info->featureset
being as long as expected, and it is allocated appropriately. However, in the
case that a shorter external featureset is passed in, the logic to check for
trailing nonzero bits may read off the end of it. Rework the logic to use the
correct upper bound.
In addition, leave a comment next to the fields in struct cpuid_domain_info
explaining the relationship between the various lengths, and how to cope with
different lengths.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The 'vp_assist' page is currently an example of a guest page which needs to
be kept mapped throughout the life-time of a guest, but there are other
such examples in the specifiction [1]. This patch therefore introduces a
generic 'viridian_page' type and converts the current vp_assist/apic_assist
related code to use it. Subsequent patches implementing other enlightments
can then also make use of it.
This patch also renames the 'vp_assist_pending' field in struct
hvm_viridian_vcpu_context to 'apic_assist_pending' to more accurately
reflect its meaning. The term 'vp_assist' applies to the whole page rather
than just the EOI-avoidance enlightenment. New versons of the specification
have defined data structures for other enlightenments within the same page.
No functional change.
[1] https://github.com/MicrosoftDocs/Virtualization-Documentation/raw/live/tlfs/Hypervisor%20Top%20Level%20Functional%20Specification%20v5.0C.pdf
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Roger Pau Monne <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Also add emacs boilerplate to avoid future problems.
Purely cosmetic. No functional change.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Clang reports:
xen-cpuid.c:307:29: error: format specifies type 'unsigned long' but the
argument has type 'uint64_t' (aka 'unsigned long long') [-Werror,-Wformat]
msrs[l].idx, msrs[l].val);
^~~~~~~~~~~
Use PRIx64 instead.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This finally (after literally years of work!) marks the point where the
toolstack can ask the hypervisor for the current CPUID configuration of a
specific domain.
Introduce a new flask access vector and update the default policies.
Also extend xen-cpuid's --policy mode to be able to take a domid and dump a
specific domains CPUID and MSR policy.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Provide a SYSCTL for the toolstack to obtain complete system CPUID and MSR
policy information.
For the flask side of things, this subop is closely related to
{phys,cputopo,numa}info, so shares the physinfo access vector.
Extend the xen-cpuid utility to be able to dump the system policies. An
example output is:
Xen reports there are maximum 113 leaves and 3 MSRs
Raw policy: 93 leaves, 3 MSRs
CPUID:
leaf subleaf -> eax ebx ecx edx
00000000:ffffffff -> 0000000d:756e6547:6c65746e:49656e69
00000001:ffffffff -> 000306c3:00100800:7ffafbff:bfebfbff
00000002:ffffffff -> 76036301:00f0b5ff:00000000:00c10000
00000004:00000000 -> 1c004121:01c0003f:0000003f:00000000
00000004:00000001 -> 1c004122:01c0003f:0000003f:00000000
00000004:00000002 -> 1c004143:01c0003f:000001ff:00000000
00000004:00000003 -> 1c03c163:03c0003f:00001fff:00000006
00000005:ffffffff -> 00000040:00000040:00000003:00042120
00000006:ffffffff -> 00000077:00000002:00000009:00000000
00000007:00000000 -> 00000000:000027ab:00000000:9c000000
0000000a:ffffffff -> 07300403:00000000:00000000:00000603
0000000b:00000000 -> 00000001:00000002:00000100:00000000
0000000b:00000001 -> 00000004:00000008:00000201:00000000
0000000d:00000000 -> 00000007:00000340:00000340:00000000
0000000d:00000001 -> 00000001:00000000:00000000:00000000
0000000d:00000002 -> 00000100:00000240:00000000:00000000
80000000:ffffffff -> 80000008:00000000:00000000:00000000
80000001:ffffffff -> 00000000:00000000:00000021:2c100800
80000002:ffffffff -> 65746e49:2952286c:6f655820:2952286e
80000003:ffffffff -> 55504320:2d334520:30343231:20337620
80000004:ffffffff -> 2e332040:48473034:0000007a:00000000
80000006:ffffffff -> 00000000:00000000:01006040:00000000
80000007:ffffffff -> 00000000:00000000:00000000:00000100
80000008:ffffffff -> 00003027:00000000:00000000:00000000
MSRs:
index -> value
000000ce -> 0000000080000000
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Use physinfo.max_cpu_id instead of physinfo.nr_cpus to get max CPU id.
This fixes for example 'xenpm get-cpufreq-para' with smt=off, which
otherwise would miss half of the cores.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Also specify field widths of the multiple similar lines printed in the
course of the loop, to help readability.
Make the iteration variable unsigned.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The casts weren't even to the right type - all LAPIC registers are
32-bit (pairs/groups of registers may be combined to form larger logical
ones, but this is not visible in the given data representation).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Also avoid printing the MSR flags (they're always zero as of commit
2f1add6e1c "x86/vmx: Don't leak host syscall MSR state into HVM
guests"), and print FPU registers only when the respective flag
indicates the space holds valid data.
Adjust format specifiers a little at the same time, in particular to
avoid at least some leading zeros to be printed when the positions
can't ever be non-zero. This helps readability in my opinion.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This requires calling dpkg-deb directly and pass it -z0.
It reduces the time to run the mkdeb script from 14 seconds to 3
seconds on my workstation with SSD, from 87s to 15s on a machine
with HDD. The deb file grows from 49M to 58M.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
rpmbuild -bb spents alot of time in compressing the binaries. Reduce the
turnaround time of 'make rpmball' by using gzip as compression tool.
This reduces the buildtime from 'w9.xzdio'/138 seconds to 'w1.gzdio'/88
seconds in my environment.
The downside is an increased filesize of xen.rpm, 19MB vs. 37MB.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xen-tools/libs.h currently contains a shared BUILD_BUG_ON() implementation and
is used by some tools. Extend this to include ARRAY_SIZE and clean up all the
opencoding.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
To combat GPZ SP4 "Speculative Store Bypass", Intel have extended their
speculative sidechannel mitigations specification as follows:
* A feature bit to indicate that Speculative Store Bypass Disable is
supported.
* A new bit in MSR_SPEC_CTRL which, when set, disables memory disambiguation
in the pipeline.
* A new bit in MSR_ARCH_CAPABILITIES, which will be set in future hardware,
indicating that the hardware is not susceptible to Speculative Store Bypass
sidechannels.
For contemporary processors, this interface will be implemented via a
microcode update.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
qemu upstream uses git submodules. git archive does not work with git
submodules (and could not work properly with them, because this is one
of the many things it is inherently impossible to do correctly with
git submodules).
qemu upstream have worked around this by providing a rather scary
shell script which attempts to do roughly the right thing. It's close
enough that we can use it with only minor precautions.
Unfortunately this does mean that `mktarball' now executes the qemu
source code it was using, rather than merely shuffling it about, as it
did previously. I think this is a less bad ill than copying (and,
effectively, forking) the scary script.
CC: Wei Liu <wei.liu2@citrix.com>
CC: George Dunlap <george.dunlap@eu.citrix.com>
CC: Juergen Gross <jgross@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
gcc-8 complains:
xen-lowmemd.c: In function 'handle_low_mem':
xen-lowmemd.c:80:55: error: '%s' directive output may be truncated writing up to 511 bytes into a region of size 489 [-Werror=format-truncation=]
snprintf(error, BUFSZ,"Failed to write target %s to xenstore", data);
^~ ~~~~
xen-lowmemd.c:80:9: note: 'snprintf' output between 36 and 547 bytes into a destination of size 512
snprintf(error, BUFSZ,"Failed to write target %s to xenstore", data);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In practice it wouldn't happen, because 'data' contains string
representation of 64-bit unsigned number (20 characters at most).
But place a limit to mute gcc warning.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
Now that it is possible to get and set the migration
delay via the SCHEDOP sysctl, use that in xenpm, instead
of the special purpose libxc interface (which will be
removed in a following commit).
The sysctl, however, requires a cpupool-id argument,
for knowing on which scheduler it is operating on. In
this case, since we don't want to alter xenpm's command
line interface, we always use '0', which means xenpm
will always act on the default cpupool ('Pool-0').
>From this commit on, `xenpm {set,get}-vcpu-migration-delay'
commands work again. But that is only for the sake of
backward compatibility, and their use is deprecated, in
favour of 'xl sched-credit -s [-c <poolid>] -m <delay>'.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Juergen Gross
Anthony PERARD
Jan Beulich
Andrew Cooper
Konrad Rzeszutek Wilk
Pawel Wieczorkiewicz
Chao Gao
Ross Lagerwall
Wei Liu
Hans van Kranenburg
Paul Durrant
Sergey Dyasli
Marek Marczykowski-Górecki
Ian Jackson
Olaf Hering
Ian Jackson
Dario Faggioli