While converting to __cpumask_set_cpu() was correct, the first argument
passed should have been corrected to be "cpu" instead of "nr" at once.
The wrong construct results in problems on systems with relatively few
CPUs.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citirx.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
master commit: 5dbdf33c57
master date: 2015-02-27 16:09:27 +0100
Non-anonymous allocations with this flag set should - for the purpose
of the availability check - be treated just like anonymous ones, as
they wouldn't lead to a reduction of ->outstanding_pages.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
master commit: 17294e69c4
master date: 2015-02-26 13:58:54 +0100
The implementation was backwards and checked that the guest could
read when asked about write and vice versa.
This is an update to the fix for XSA-98.
Reported-by: Tamas K Lengyel <tklengyel@sec.in.tum.de>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit c1245e9d5b)
By default qemu will try to create some sort of backend for the
emulated VGA device, either SDL or VNC.
However when the user specifies sdl=0 and vnc=0 in their configuration
libxl was not explicitly disabling either backend, which could lead to
one unexpectedly running.
If either sdl=1 or vnc=1 is configured then both before and after this
change only the backends which are explicitly enabled are configured,
i.e. this issue only occurs when all backends are supposed to have
been disabled.
This affects qemu-xen and qemu-xen-traditional differently.
If qemu-xen was compiled with SDL support then this would result in an
SDL window being opened if $DISPLAY is valid, or a failure to start
the guest if not. Passing "-display none" to qemu before any further
-sdl options disables this default behaviour and ensures that SDL is
only started if the libxl configuration demands it.
If qemu-xen was compiled without SDL support then qemu would instead
start a VNC server listening on ::1 (IPv6 localhost) or 127.0.0.1
(IPv4 localhost) with IPv6 preferred if available. Explicitly pass
"-vnc none" when vnc is not enabled in the libxl configuration to
remove this possibility.
qemu-xen-traditional would never start a vnc backend unless asked.
However by default it will start an SDL backend, the way to disable
this is to pass a -vnc option. In other words passing "-vnc none" will
disable both vnc and sdl by default. sdl can then be reenabled if
configured by subsequent use of the -sdl option.
Tested with both qemu-xen and qemu-xen-traditional built with SDL
support and:
xl cr # defaults
xl cr sdl=0 vnc=0
xl cr sdl=1 vnc=0
xl cr sdl=0 vnc=1
xl cr sdl=0 vnc=0 vga=\"none\"
xl cr sdl=0 vnc=0 nographic=1
with both valid and invalid $DISPLAY.
This is XSA-119 / CVE-2015-2152.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
(cherry picked from commit 91b0ae9db3)
In order for commit cbeeaa7d ("x86/nmi: fix shootdown of pcpus
running in VMX non-root mode")'s re-use of that fixmap entry to not
cause undesirable (in crash context) cross-CPU TLB flushes, invalidate
the fixmap entry right after use.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: 375a09cffa
master date: 2015-03-04 09:59:47 +0100
For ModRM encoded instructions with register operands we must not
overwrite ea.mem.seg (if a - bogus in that case - segment override was
present) as it aliases with ea.reg.
This is CVE-2015-2151 / XSA-123.
Reported-by: Felix Wilhelm <fwilhelm@ernw.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Reviewed-by: Keir Fraser <keir@xen.org>
master commit: bcf92a5382
master date: 2015-03-10 13:45:51 +0100
... avoiding to pass hypervisor stack contents back to the caller
through space unused by the respective strings.
This is CVE-2015-2045 / XSA-122.
Signed-off-by: Aaron Adams <Aaron.Adams@nccgroup.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
master commit: fe2e079f64
master date: 2015-03-05 13:35:54 +0100
So far the value presented to the guest remained uninitialized.
This is CVE-2015-2044 / XSA-121.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
master commit: c9e57594e1
master date: 2015-03-05 13:34:54 +0100
c/s 5b5c40c0d1 "libxc: introduce a per architecture scratch pfn for temporary
grant mapping" accidentally an issue whereby there were two paths out of
xc_core_arch_get_scratch_gpfn() which returned 0, but only one of which
assigned a value to the gpfn parameter.
xc_domain_maximum_gpfn() can validly return 0, at which point gpfn 1 is a
valid scratch page to use.
In addition, widen rc before adding 1 and possibly overflowing.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Julien Grall <julien.grall@linaro.org>
CC: Jan Beulich <JBeulich@suse.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit 5b0447f647)
c/s 7dd3b06ff "vmx: fix handling of NMI VMEXIT" fixed one issue but
inadvertently introduced a regression when it came to the NMI shootdown. The
shootdown code worked by patching vector 2 in each IDT, but the introduced
direct call to do_nmi() bypassed this.
Instead of patching each IDT, take a different approach by updating the
existing dispatch table. This allows for the removal of the remote IDT
patching and the removal of the nmi_crash() entry point.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: cbeeaa7da0
master date: 2015-02-11 17:18:27 +0100
and use it in preference to the direct call to do_nmi() in vmx.c
The value 'TRAP_last_reserved' was only used where 'TRAP_nr' would be more
appropriate, so is replaced.
No functional change
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: d3eb16b8a7
master date: 2015-02-11 17:16:18 +0100
...when they are added back into the guest physmap, when an ioreq
server is disabled. If this is not done then the pages are missed
during migration, causing ioreq server creation to fail on the remote end.
This problem only manifests if the ioreq server is non-default because in
the default case the pages are never removed from the guest physmap.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
master commit: 70f6911300
master date: 2015-02-10 13:29:51 +0100
In the case where a stub domain is providing emulation for an HVM
guest, there is no interlock in the toolstack to make sure that
the stub domain is up and running before the guest is unpaused.
Prior to the introduction of ioreq servers this was not a problem,
since there was only ever one emulator so ioreqs were simply
created anyway and the vcpu remained blocked until the stub domain
started and picked up the ioreq.
Since ioreq servers allow for multiple emulators for a single guest
it's not possible to know a priori which emulator will handle a
particular ioreq, so emulators must attach to a guest before the
guest runs.
This patch works around the lack of interlock in the toolstack for
stub domains by keeping the domain paused until at least one ioreq
server is created and enabled, which in practice means the stub
domain is indeed up and running.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
master commit: dd748d128d
master date: 2015-02-10 13:28:40 +0100
NMI watchdog sets APIC_LVTPC register to generate an NMI when PMU counter
overflow occurs. This may be overwritten by VPMU code later, effectively
turning off the watchdog.
We should disable VPMU when NMI watchdog is running.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: e5e09b5c46
master date: 2015-02-03 11:30:09 +0100
The GICv2 spec reserved the value 0b11 for GICD_SGIR.TargetListFilter.
Even if it's an invalid value, a malicious guest could write this value
and threfore crash the hypervisor.
Replace the BUG() by logging the error and inject a data abort to the guest.
This was introduced by commit ea37fd2111
"xen/arm: split vgic driver into generic and vgic-v2 driver".
This is CVE-2015-0268 / XSA-117.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This has been renamed by the rumpkernels upstream.
(This patch needs to be backported.)
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Antti Kantee <pooka@iki.fi>
CC: Martin Lucina <martin@lucina.net>
CC: Ian Campbell <Ian.Campbell@eu.citrix.com>
(cherry picked from commit f4e99a4f5098f6fa3c856f79b8365bb29a3d3a15)
Starting from rump kernel changeset 91d5623 ("Renaming platform macros,
app-tools and autoconf target string"), __RUMPUSER_XEN__ and __RUMPAPP__
are deleted. We are supposed to use __RUMPRUN__ instead.
We still keep __RUMPUSER_XEN__ for now in order to make xen-unstable
pass osstest push gate. I will remove __RUMPUSER_XEN__ later.
Related discussion:
http://thread.gmane.org/gmane.comp.rumpkernel.user/739
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
(cherry picked from commit 441256a532)
The code to initialize the grant table in libxc uses
xc_domain_maximum_gpfn() + 1 to get a guest pfn for mapping the grant
frame and to initialize it.
This solution has two major issues:
- The check of the return of xc_domain_maximum_gpfn is buggy because
xen_pfn_t is unsigned and in case of an error -ERRNO is returned.
Which is never catch with ( pfn <= 0 ).
- The guest memory layout maybe filled up to the end, i.e
xc_domain_maximum_gpfn() + 1 gives either 0 or an invalid PFN due to
hardware limitation.
Futhermore, on ARM, xc_domain_maximum_gpfn() is not implemented and
return -ENOSYS. This will make libxc to use always the same PFN which
may colapse with an already mapped region (see xen/include/public/arch-arm.h
for the layout).
This patch only address the problem for ARM, the x86 version use the same
behavior (ie xc_domain_maximum_gpfn() + 1), as I'm not familiar with Xen x86.
A new function xc_core_arch_get_scratch_gpfn is introduced to be able to
choose the gpfn per architecture.
For the ARM version, we use the GUEST_GNTTAB_GUEST which is the base of
the region by the guest to map the grant table. At the build time,
nothing is mapped there.
At the same time correctly check the return of xc_domain_maximum_gpfn
for x86.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit 5b5c40c0d1)
"origPtr" is used as an offset into the bd->dbuf[] array. That array is
allocated in start_bunzip() and has "bd->dbufSize" number of elements so
the test here should be >= instead of >.
Later we check "origPtr" again before using it as an offset so I don't
know if this bug can be triggered in real life.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Trivial adjustments to make the respective Linux commit
b5c8afe5be51078a979d86ae5ae78c4ac948063d apply to Xen.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
master commit: 39798e95a9
master date: 2015-01-28 16:50:08 +0100
.. otherwise it has the side effect that: domain_relinquish_resources
will stop and will return to user-space with -EINTR which it is not
equipped to deal with that error code; or vcpu_reset - which will
ignore it and convert the error to -ENOMEM..
The preemption mechanism we have for domain destruction is to return
-EAGAIN (and then user-space calls the hypercall again) and as such we need
to catch the case of:
domain_relinquish_resources
->vcpu_destroy_pagetables
-> put_page_and_type_preemptible
-> __put_page_type
returns -EINTR
and convert it to the proper type. For:
XEN_DOMCTL_setvcpucontext
-> vcpu_reset
-> vcpu_destroy_pagetables
we need to return -ERESTART otherwise we end up returning -ENOMEM.
There are also other callers of vcpu_destroy_pagetables: arch_vcpu_reset
(vcpu_reset) are:
- hvm_s3_suspend (asserts on any return code),
- vlapic_init_sipi_one (asserts on any return code),
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: de4f284b3d
master date: 2015-01-26 12:51:09 +0100
Only the low 32 bits are relevant.
For consistency also change a cast on regs->eax to regs->_eax.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: ae1edef1ae
master date: 2015-01-22 12:48:40 +0100
As done by the recent Linux commit b65d6e17fe ("kvm: x86: mask out
XSAVES") for KVM, we should also mask out XSAVES from what PV guests
get to see as long as we don't emulate accesses to MSR_IA32_XSS.
Actually, go beyond that: Just like for leaf 7, switch from
blacklisting to whitelisting, i.e. only allow XSAVEOPT and XSAVEC for
the time being. And do these overrides consistently for both Dom0 and
DomU-s.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 8d050ed109
master date: 2015-01-22 12:47:56 +0100
Xen event channels are not internal resources. They still have one end in a
domain, and are created at the request of privileged domains. This logic
which "successfully" creates a Xen event channel opens up undesirable failure
cases with ill-specified XSM policies.
If a domain is permitted to create ioreq servers or memevent listeners, but
not to create event channels, the ioreq/memevent creation will succeed but
attempting to bind the returned event channel will fail without any indication
of a permission error.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
master commit: 09aa4759fa
master date: 2015-01-20 10:42:26 +0100
XENMEM_{in,de}crease_reservation as well as XENMEM_populate_physmap
return the extent at which failure was detected, not error indicators.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Tim Deegan <tim@xen.org>
master commit: 76d4ff26d9
master date: 2015-01-19 11:59:05 +0100
While for us it's not as bad as it was for Linux, their commit
13e457e0ee ("KVM: x86: Emulator does not decode clflush well", by
Nadav Amit <namit@cs.technion.ac.il>) nevertheless points out two
shortcomings in our code: opcode 0F AE /7 is clflush only when it uses
a memory mode (otherwise it's SFENCE) and when there's no REP prefix
(an operand size prefix is fine, as that's CLFLUSHOPT).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 9d03db6b81
master date: 2015-01-12 15:41:12 +0100
printk is not rated-limited by default. Therefore a malicious guest may
be able to flood the Xen console.
If we use gdprintk, unecessary information will be printed such as the
filename and the line. Instead use XENLOG_G_ERR combine with %pv.
This is XSA-118.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit d0b2caa80f)
printk by default is not rate-limited by default. Therefore a malicious guest
may be able to flood the Xen console.
If we use gdprintk, unnecessary information will be printed such as the
filename and the line. Instead use XENLOG_G_{ERR,DEBUG} combine with %pv.
Also remove the vGICv3 prefix which is not neccessary and update some
message which were wrong.
This is XSA-118.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
(cherry picked from commit c96222cc6d)
In pl011.c, when TX interrupt is received
serial_tx_interrupt() is called to push next
characters. If TX buffer is empty, serial_tx_interrupt()
does not disable TX interrupt and hence pl011 UART
irq handler pl011_interrupt() always sees TX interrupt
status set in MIS register and cpu does not come out of
UART irq handler.
With this patch, mask TX interrupt by writing 0 to
IMSC register when TX buffer is empty and unmask by
writing 1 to IMSC register before sending characters.
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Reviewed-by: Tim Deegan <tim@xen.org>
(cherry picked from commit 20e297f840)
',' is a valid character in a device-tree path (see ePAPR v1.1 Table
2-1), in fact ',' is actually pretty common in node names.
Using ',' as a separator breaks for example on fast models. If you use
the full path (/smb/motherboard/iofpga@3,00000000/uart@090000) rather
than the alias then earlyprintk gives:
(XEN) Looking for UART console /smb/motherboard/iofpga@3
(XEN) Unable to find device "/smb/motherboard/iofpga@3"
(XEN) Bad console= option 'dtuart'
I actually noticed this on Jetson where the uart is
"/serial@0,70006300" and there happened to be no alias defined.
Instead use ':' as the separator, it is defined to terminate the path
in the context of /chosen/stdout-path (Table 3-4) which is pretty
closely analogous to the dtuart= option and so makes a pretty good
choice (especially since the next patch adds support for stdout-path).
Since no DT aware driver current supports any options there is no
point in retaining support for ',' for backwards compatibility.
Additionally, expand the buffer for the dtuart option, a path can be
far longer than 30 characters (in fact the maximum size of a single
node name is 31, so it's not even necessarily enough for an alias).
128 is completely arbitrary and allows for paths at least 8 deep even
with worst case node names.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
(cherry picked from commit f01af57300)
This can (and will) be legitimately the case when sharing page tables
with EPT (more of a problem before p2m_access_rwx became zero, but
still possible even now when other than that is the default for a
guest), leading to an unconditional crash (in print_vtd_entries())
when a DMA remapping fault occurs.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
master commit: 46e0baf591
master date: 2015-01-07 11:13:58 +0100
We need to make sure that last_vcpu is not pointing to VCPU whose
VPMU is being destroyed. Otherwise we may try to dereference it in
the future, when VCPU is gone.
We have to do this via IPI since otherwise there is a (somewheat
theoretical) chance that between test and subsequent clearing
of last_vcpu the remote processor (i.e. vpmu->last_pcpu) might do
both vpmu_load() and then vpmu_save() for another VCPU. The former
will clear last_vcpu and the latter will set it to something else.
Performing this operation via IPI will guarantee that nothing can
happen on the remote processor between testing and clearing of
last_vcpu.
We should also check for VPMU_CONTEXT_ALLOCATED in vpmu_destroy() to
avoid unnecessary percpu tests and arch-specific destroy ops. Thus
checks in AMD and Intel routines are no longer needed.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
master commit: ed80171556
master date: 2015-01-07 11:12:27 +0100
The first paragraph seems to have been wrapped to 70, so do the other
new paragraphs to 70 too for visual consistency.
No non-whitespace change.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* Add two missing "and"s and a missing semicolon (a la Oxford comma).
* Use a double-space after full stop (like the first paragraph does).
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Expand the README file to give a brief view of what went in
Xen 4.5.0. Also change the Makefile to not use the '-rc'
postfix.
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
These repos have branched for 4.5, along with xen.git. At the moment,
they have a repo per Xen branch.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Jan Beulich
Ian Campbell
Aaron Adams
Andrew Cooper
Paul Durrant
Boris Ostrovsky
Julien Grall
Ian Jackson
Wei Liu
Jim Fehlig
Dan Carpenter
Konrad Rzeszutek Wilk
Vijaya Kumar K
Olaf Hering