The current behavior is:
42sh> xl uptime
'xl uptime' requires at least 1 argument.
Usage: xl [-v] uptime [-s] [Domain]
The normal behavior should list uptime for each domain when there is no
parameters.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
(cherry picked from commit 3533972f6d)
since it errors out, asking for at least one argument, and does
not display any useful output, which is wrong (we want the list
and the info about all the existing cpupools).
IOW, the output is as follows:
~# xl cpupool-list -c
'xl cpupool-list' requires at least 1 argument.
...
While it should be as follows:
~# xl cpupool-list -c
Name CPU list
Pool-0 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
(cherry picked from commit 3998afdbf9)
The qxl drivers for Windows and Linux end up calling instructions
that cannot be used for MMIO at the moment. Just for the 4.3 release,
remove qxl support.
This patch should be reverted as soon as the 4.4 development window opens.
The issue in question:
(XEN) emulate.c:88:d18 bad mmio size 16
(XEN) io.c:201:d18 MMIO emulation failed @ 0033:7fd2de390430: f3 0f 6f
19 41 83 e8 403
The instruction in question is "movdqu (%rcx),%xmm3". Xen knows how
to emulate it, but unfortunately %xmm3 is 16 bytes long, and the interface
between Xen and qemu at the moment would appear to only allow MMIO accesses
of 8 bytes.
It's too late in the release cycle to find a fix or a workaround.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Two changes:
* Stat the file before calling libxl_cdrom_insert()
* Return an error if anything fails (including libxl_cdrom_insert)
This is in part to work around the fact that the RAW disk type
is used for things that aren't actually files; so we can't call
stat in libxl_device.c:libxl__device_disk_set_backend() because
it may be going over a remote protocol.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The libxl_cpu_bitmap_alloc(..) function, if provided with a zero
value for max CPUs will call xc_get_max_cpus() which will retrieve
the number of physical CPUs the host has. This is usually
OK if the guest's maxvcpus <= host pcpus. But if the value
is different, then the bitmap for VCPUs is limited by the
number of CPUs the host has.
This is incorrect as what we want is to hotplug in the guest
the amount of CPUs that the user specified on the command line
and not be limited by the amount of physical CPUs.
This means that a guest config like this:
vcpus=8
maxvcpus=32
and on a 4 PCPU machine doing
xl vcpu-set <guest name> 16
won't work. This is b/c the the size of the bitmap is one byte
so it can only hold up to 8 VCPUs. Hence anything above that
is going to be ignored.
Note that this patch also fixes the bitmap setting - as it
would set all of the bits allowed. Meaning if the user had a 4PCPU
host we would still allow the user to set 8VCPUs. This second
iteration of the patch fixes this.
Note that all of the libxl_cpu_bitmap_[test|set] silently ignore
any test or sets above its size:
if (bit >= bitmap->size * 8)
return 0;
so we were never notified off this bug.
This patch warns the user if they are trying to do this. If the
user really wants to do this they have to provide the --ignore-host
parameter to bypass this check.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
During the review of "libxl: Change claim_mode from bool to int."
Ian Campbell suggested that the xl info should print the
claim information irregardless of the global claim_mode value.
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
During the review it was noticed that it would be better if internally
the claim_mode was held as an 'int' instead of a 'bool'. The reason
is that during the startup of xl, one has call the libxl_defbool_setdefault.
otherwise any usage of claim_mode would result in assert break.
The assert is due to the fact that using defbool without any set
values (either true of false) will cause it hit an assertion.
If we use an 'int' we don't have to worry about it and by default
the value of zero will suffice for checks whether the claim is
enabled or disabled.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
During the review of the patches it was noticed that there exists
a race wherein the 'free_memory' value consists of information from
two hypercalls. That is the XEN_SYSCTL_physinfo and XENMEM_get_outstanding_pages.
The free memory the host has available for guest is the difference between
the 'free_pages' (from XEN_SYSCTL_physinfo) and 'outstanding_pages'. As they
are two hypercalls many things can happen in between the execution of them.
This patch resolves this by eliminating the XENMEM_get_outstanding_pages
hypercall and providing the free_pages and outstanding_pages information
via the xc_phys_info structure.
It also removes the XSM hooks and adds locking as needed.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Tim Deegan <tim@xen.org>
Acked-by: Keir Fraser <keir.xen@gmail.com>
This adds a backend_domname field in libxl devices that contain a
backend_domid field, allowing either a domid or a domain name to be
specified in the configuration structures. The domain name is resolved
into a domain ID in the _setdefault function when adding the device.
This change allows the backend of the block devices to be specified
(which previously required passing the libxl_ctx down into the block
device parser), and will simplify specification of backend domains in
other users of libxl.
The check on run_hotplug_scripts in parse_config_data is removed because
it is a duplicate of the one in libxl__device_nic_setdefault, and is
removed here because it no longer has the resolved domain ID to check.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- reran flex ]
Node-affinity is now something that is under (some) control of the
user, so show it upon request as part of the output of `xl list'
by the `-n' option.
Re the patch, the print_bitmap() related hunk is _mostly_ code motion,
although there is a very minor change in the code, basically to allow
using the function for printing both cpu and node bitmaps (as, in case
all bits are sets, it used to print "any cpu", which doesn't fit the
nodemap case).
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Updating to make it clear that free_memory reported by 'xl info'
is influenced by the outstanding claim value. That is the free
memory that will be available to the host once all outstanding
claims have been completed. This modifies the behavior that the
patch titled "xl: 'xl info' print outstanding claims if enabled
(claim_mode=1 in xl.conf)" had - which reported the
outstanding claims and nothing else.
The free_pages as reported by the hypervisor is the currently
available count of pages on the heap. The outstanding pages is
the total amount of pages reserved for guests (so not taken from
the heap yet). As guests are being populated the memory from the
heap shrinks and the outstanding count of pages decreases.
The total memory used for guests increases.
As the available count of pages on the heap and outstanding
claims are intertwined, report the amount of free memory available
to be a combination of that. That is free heap memory minus the
outstanding pages.
We also make some odd choices in reporting. By default we will
only display 'outstanding_claims' if the claim_mode is enabled
in the global configuration file. However, if there are outstanding
claims, we will ignore the claim_mode and report these values.
Suggested-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This is similar to "xl: 'xl info' print outstanding claims if enabled
(claim_mode=1 in xl.conf)" which exposes the global claim value.
This patch provides the value of the currently outstanding pages
claimed for each domains. This is per domain value which is added
to the global claim value which influences the hypervisors' MM system.
When a claim call is done, a reservation for a specific amount of pages
is set (and this patch lists said number) and also a global value is
incremented. This global value is then reduced as the domain's memory
is populated and eventually reaches zero.
The toolstack (libxc) also sets the domain's claim to zero when the population
of memory has completed as an extra step. Any call to destroy the domain
will also set the domain's claim to zero.
If the reservation cannot be meet the guest creation fails immediately
instead of taking seconds or minutes (depending on the size of the guest)
while the toolstack populates memory.
See patch: "xl: Implement XENMEM_claim_pages support via 'claim_mode'
global config" for details on how it is implemented.
The value fluctuates quite often so the value is stale once it is provided
to the user-space. However it is useful for diagnostic purposes.
It is printed irregardless of global "claim_mode" option in xl.conf(5).
That is b/c the user might have enabled, launched a guest, and then
disabled the option - and we should still report the correct outstanding
claim value. The 'man xl' shows the details of this argument.
The output is close to what 'xl list' looks like:
Name ID Mem VCPUs State Time(s) Claimed
Domain-0 0 2047 4 r----- 19.7 0
OL5 2 2048 1 --p--- 0.0 847
OL6 3 1024 4 r----- 5.9 0
Windows_XP 4 2047 1 --p--- 0.0 1989
[In which it can be seen that the OL5 guest still has 847MB of claimed
memory (out of the total 2048MB where 1191MB has been allocated to
the guest).]
Please note that the 'Mem' column has the cumulative value of outstanding
claims and the total amount of memory that has been allocated to the guest.
[v1: claims, not claim-list]
[v2: Add outstanding and current memkb in the output list]
[v3: Clairy docs and relax some checks]
[v4: Removed comments about guest config memory being the same as 'Mem']
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch provides the value of the currently outstanding pages
claimed for all domains. This is a total global value that influences
the hypervisors' MM system.
When a claim call is done, a reservation for a specific amount of pages
is set and also a global value is incremented. This global value is then
reduced as the domain's memory is populated and eventually reaches zero.
The toolstack (libxc) also sets the domain's claim to zero when the population
of memory has completed as an extra step. Any call to destroy the domain
will also set the domain's claim to zero.
If the reservation cannot be meet the guest creation fails immediately
instead of taking seconds or minutes (depending on the size of the guest)
while the toolstack populates memory.
See patch: "xl: Implement XENMEM_claim_pages support via 'claim_mode'
global config" for details on how it is implemented.
The value fluctuates quite often so the value is stale once it is provided
to the user-space. However it is useful for diagnostic purposes.
It is only printed when the global "claim_mode" option in xl.conf(5)
is set to enabled (1). The 'man xl' shows the details of this item.
[v1: s/unclaimed/outstanding/]
[v2: Made libxl_get_claiminfo return just MemKB suggested by Ian Campbell]
[v3: Made libxl_get_claininfo return MemMB to conform to the other values printed]
[v4: Improvements suggested by Ian Jackson, also added docs to xl.pod.1]
[v5: Clarify how claims are cancelled, split >72 characters - Ian Jackson]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The XENMEM_claim_pages hypercall operates per domain and it should be
used system wide. As such this patch introduces a global configuration
option 'claim_mode' that by default is disabled.
If this option is enabled then when a guest is created there will be an
guarantee that there is memory available for the guest. This is an
particularly acute problem on hosts with memory over-provisioned guests
that use tmem and have self-balloon enabled (which is the default option
for them). The self-balloon mechanism can deflate/inflate the balloon
quickly and the amount of free memory (which 'xl info' can show) is stale
the moment it is printed. When claim is enabled a reservation for the
amount of memory ('memory' in guest config) is set, which is then reduced
as the domain's memory is populated and eventually reaches zero.
If the reservation cannot be meet the guest creation fails immediately
instead of taking seconds/minutes (depending on the size of the guest)
while the guest is populated.
Note that to enable tmem type guests, one needs to provide 'tmem' on the
Xen hypervisor argument and as well on the Linux kernel command line.
There are two boolean options:
(0) No claim is made. Memory population during guest creation will be
attempted as normal and may fail due to memory exhaustion.
(1) Normal memory and freeable pool of ephemeral pages (tmem) is used when
calculating whether there is enough memory free to launch a guest.
This guarantees immediate feedback whether the guest can be launched due
to memory exhaustion (which can take a long time to find out if launching
massively huge guests) and in parallel.
[v1: Removed own claim_mode type, using just bool, improved docs, all per
Ian's suggestion]
[v2: Updated the comments]
[v3: Rebase on top 733b9c524d (xl: add vif.default.script)]
[v4: Fixed up comments]
[v5: s/global_claim_mode/claim_mode/]
[v6: Ian Jackson's feedback: use libxl_defbool, better comments, etc]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Allow the "usbdevice" key to accept a list of USB devices, and pass
them in using the new usbdevice_list domain build element.
For backwards compatibility, still accept singleton values.
Also update the xl.cfg manpage, adding information about how to pass
through host devices.
as applied:
- Fix trailing whitespace and wrap some lines in xl_cmdimpl.c -iwj
v2:
- Add some verbiage to make it clear that "usb" is for emulated devices
- Reference qemu manual for more usbdevice options
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Usage:
vga="stdvga"|"cirrus"
- Default option is cirrus.
- Prints error and exit if unknown value is passed.
- stdvga parameter is now deprecated.
- Updated xl.cfg man.
Signed-off-by: Fabio Fantoni <fabio.fantoni@heliman.it>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch introduces support for two new parameters in libxl:
smbios_firmware=<path_to_smbios_structures_file>
acpi_firmware=<path_to_acpi_tables_file>
The changes are primarily in the domain building code where the firmware files
are read and passed to libxc for loading into the new guest. After the domain
building call to libxc, the addresses for the loaded blobs are returned and
written to xenstore.
LIBXL_HAVE_FIRMWARE_PASSTHROUGH is defined in libxl.h to allow users to
determine if the feature is present.
This patch also updates the xl.cfg man page with descriptions of the two new
parameters for firmware passthrough.
Signed-off-by: Ross Philipson <ross.philipson@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
libxl_domain_suspend is already prepared to handle LIBXL_SUSPEND_DEBUG,
and xl migrate handles the -d switch as well. Pass this flag down to
libxl_domain_suspend, so that finally xc_domain_save can dump huge
amount of debug data to stdout.
Update xl.1 and help text output.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This removes the need for the "case 0: case 2:" boilerplate in every
main_foo(). Calls exit(3) directly which is OK since xl cleans up the
context etc in an atexit(3) handler.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Improves consistency of option parsing and error handling.
Consistently support --help for all options.
Many users of getopt_long were needlessly passing an option_index
pointer which was not used.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Allow a domain to be built under one security label and run using a
different label. This can be used to prevent the domain builder or
control domain from having the ability to access a guest domain's memory
via map_foreign_range except during the build process where this is
required.
Example domain configuration snippet:
seclabel='customer_1:vm_r:nomigrate_t'
init_seclabel='customer_1:vm_r:nomigrate_t_building'
Note: this does not provide complete protection from a malicious dom0;
mappings created during the build process may persist after the relabel,
and could be used to indirectly access the guest's memory. However, if
dom0 correctly unmaps the domain upon building, a the domU is protected
against dom0 becoming malicious in the future.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
If the user has set a vnc display number both in vnclisten (with
"xxxx:yy"), and with vncdisplay, throw an error.
Update man pages to match.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch adds vtpm support to libxl. It adds vtpm parsing to config
files and 3 new xl commands:
vtpm-attach
vtpm-detach
vtpm-list
Signed-off-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The goto in both of these places misses the event free which would
normally clean up.
==8655== 80 bytes in 1 blocks are definitely lost in loss record 1 of 1
==8655== at 0x4024370: calloc (vg_replace_malloc.c:593)
==8655== by 0x406EAAE: libxl__zalloc (libxl_internal.c:83)
==8655== by 0x4078173: libxl__event_new (libxl_event.c:1167)
==8655== by 0x4056373: domain_death_occurred (libxl.c:958)
==8655== by 0x4058D06: domain_death_xswatch_callback (libxl.c:1038)
==8655== by 0x4078EB5: watchfd_callback (libxl_event.c:458)
==8655== by 0x407839E: afterpoll_internal (libxl_event.c:949)
==8655== by 0x4079142: eventloop_iteration (libxl_event.c:1371)
==8655== by 0x40799BB: libxl_event_wait (libxl_event.c:1396)
==8655== by 0x805CC67: create_domain (xl_cmdimpl.c:1698)
==8655== by 0x805E001: main_create (xl_cmdimpl.c:3986)
==8655== by 0x804D43D: main (xl.c:285)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The goto in both of these places misses the event free which would
normally clean up.
==8655== 80 bytes in 1 blocks are definitely lost in loss record 1 of 1
==8655== at 0x4024370: calloc (vg_replace_malloc.c:593)
==8655== by 0x406EAAE: libxl__zalloc (libxl_internal.c:83)
==8655== by 0x4078173: libxl__event_new (libxl_event.c:1167)
==8655== by 0x4056373: domain_death_occurred (libxl.c:958)
==8655== by 0x4058D06: domain_death_xswatch_callback (libxl.c:1038)
==8655== by 0x4078EB5: watchfd_callback (libxl_event.c:458)
==8655== by 0x407839E: afterpoll_internal (libxl_event.c:949)
==8655== by 0x4079142: eventloop_iteration (libxl_event.c:1371)
==8655== by 0x40799BB: libxl_event_wait (libxl_event.c:1396)
==8655== by 0x805CC67: create_domain (xl_cmdimpl.c:1698)
==8655== by 0x805E001: main_create (xl_cmdimpl.c:3986)
==8655== by 0x804D43D: main (xl.c:285)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduced by changeset 26091: "xl: Add --wait and --all to xl reboot."
Signed-off-by: Sander Eikelenboom <linux@eikelenboom>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Make xl/libxl accept the long option --wait for -w to be compatible with xm.
The long options are used in the default init and sysconfig scripts.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Lots of functions loop over a list of domain and others take a domid as
a parameter, shadowing the global one and leading to all sorts of
confusion.
Therefore remove the global domid and explicitly pass it around as
necessary.
Adds a domid to the parameters for many functions and switches many
others from taking a char * domain specifier to taking a domid, pushing
the domid lookup to the toplevel.
Replaces some open-coded domain_qualifier_to_domid error checking with
find_domain.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- annotate find_domain() with warn_unused_result and fix the
handful of errors. ]
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Valgrind reports:
==3076== 7 bytes in 1 blocks are definitely lost in loss record 1 of 1
==3076== at 0x402458C: malloc (vg_replace_malloc.c:270)
==3076== by 0x406F86D: libxl_cpupoolid_to_name (libxl_utils.c:102)
==3076== by 0x8058742: parse_config_data (xl_cmdimpl.c:639)
==3076== by 0x805BD56: create_domain (xl_cmdimpl.c:1838)
==3076== by 0x805DAED: main_create (xl_cmdimpl.c:3903)
==3076== by 0x804D39D: main (xl.c:285)
And indeed there are several places where xl uses
libxl_cpupoolid_to_name as a boolean to test if the pool name is
valid and leaks the name if it is. Introduce an is_valid helper and
use that instead.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Juergen Gross<juergen.gross@ts.fujitsu.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Print an error and exit if backend!=0 is used in conjunction with
run_hotplug_scripts. Currently libxl can only execute hotplug scripts
from the toolstack domain (the same domain xl is running from).
Added a description and workaround of this issue on
xl-network-configuration.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
c/s 25779:4ca40e0559c3 introduced a compilation error for any build
system using -Werror=uninitialized, such as the default CentOS 5.7
version of gcc.
And with good reason, because if the global libxl
default_output_format is neither OUTPUT_FORMAT_SXP nor
OUTPUT_FORMAT_JSON, the variable hand will be used before being
initialised.
The attached patch fixes the warning, and futher fixes the logic to
work correctly when a new OUTPUT_FORMAT is added to xl.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Bastian Blank reports that the output of this command is just multiple
JSON objects concatenated and is not a single properly formed JSON
object.
Fix this by wrapping in an array. This turned out to be a bit more
intrusive than I was expecting due to the requirement to keep
supporting the SXP output mode.
Python's json module is happy to parse the result...
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Although the current implementation has no asynchromous parts I can
envisage it needing to do bits of create/destroy like functionality
which may need async support in the future.
To do this make the meat into an internal libxl__domain_resume
function in order to satisfy the no-internal-callers rule for the
async function.
Since I needed to touch the logging to s/ctx/CTX/ anyway switch to the
LOG* helper macros.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Microsoft have now published their VM generation ID specification at
https://www.microsoft.com/en-us/download/details.aspx?id=30707.
It differs from the original specification upon which I based my
implementation in several key areas. Particularly, it is no longer
an incrementing 64-bit counter and so this patch is to remove
the incr_generationid field from the build_info and also disable the
ACPI device before 4.2 is released.
I will follow up with further patches to implement the VM generation
ID to the new specification.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This does not make the implementation fully asynchronous but just
updates the API to support asynchrony in the future.
Currently although these functions do not call hotplug scripts etc and
therefore are not "slow" (per the comment about ao machinery in
libxl_internal.h) they do interact with the device model and so are
not quite "fast" either. We can live with this for now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Julien Grall
Roger Pau Monne
Andrew Cooper
Dario Faggioli
George Dunlap
Konrad Rzeszutek Wilk
Daniel De Graaf
Fabio Fantoni
Ross Philipson
Olaf Hering
Ian Campbell
Matthew Fioravante
Kouya Shimura
Ian Jackson
Sander Eikelenboom
Christoph Egger
Sander Eikelenboom
Bastian Blank
Paul Durrant