"mkdir -p" reports a missing operand, as config/ has no subdirs. Oddly
enough this doesn't cause the whole command (and hence the build to
fail), despite the "set -e" now covering the entire set of commands -
perhaps a quirk of the relatively old bash I've seen this with (a few
simple experiments suggest that commands inside () producing a non-
success status would exit the inner shell, but not the outer one).
Add a dummy . argument to the invocation.
Suggested-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
"set -e" on a separate Makefile line is meaningless. Glue together all
the lines that this is supposed to cover.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
So it can be used by both gcc and clang. Just add the Kconfig option
and modify the makefiles so the llvm coverage specific code can be
added in a follow up patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[jb: also change the shim config]
Remove sched=null from shim cmdline and doc
We use the default scheduler (credit1 as of writing). The NULL
scheduler still has bugs to fix.
Update shim.config.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Kconfig has
bool "VGA support" if !PV_SHIM_EXCLUSIVE
so for the shim build VGA option doesn't exist.
This avoids having shim.config changed every time the shim is built.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Through a Kconfig option. Enable it by default, and disable it for the
PV-in-PVH shim.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link a minimum set of files to build the shim. The linkfarm rune can
handle creation and deletion of files. Introduce build-shim and
install-shim targets in xen/Makefile.
We can do better by properly generate the dependency from the list of
files but that's an improvement for later.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
It makes more sense to put a tool to be used by other subsystems
to be in 'tools/misc' along 'mkrpm','mkdeb', etc.
The patch titled "xen/livepatch/x86/arm32: Force .livepatch.depends
section to be uint32_t aligned" uses mkhex.
Acked-by: Wei Liu <wei.liu2@citrix.com>
Suggested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
instead of hardcoding values. We also drop the uint64_t
cast as the macro uses ULL to produce the proper width
types.
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This also covers an individual string insn access crossing a page
boundary.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This re-enables tests on configurations where commit 0d6968635c
("hvmloader: avoid tests when they would clobber used memory") forced
them to be skipped.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
DEPS_INCLUDE is currently the same as DEPS, so no functional change.
This patch is the result of this perl rune:
git-grep -l 'include.*DEPS' | xargs perl -i -pe 'next unless m/^-?include/; s/\bDEPS\b/DEPS_INCLUDE/'
I have verified that I haven't missed anything, with this rune:
git-grep '\bDEPS\b'
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
DEPS_RM is currently the same as DEPS, so no functional change.
This patch is the result of two perl runes:
git-grep -l 'rm.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+rm\b/; s/\bDEPS\b/DEPS_RM/;'
git-grep -l 'RM.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+\$\(RM\)/; s/\bDEPS\b/DEPS_RM/;'
And editing tools/xenstat/libxenstat/Makefile by hand.
I verified that I didn't miss anything with this rune:
git-grep '\bDEPS\b' | grep -v include |less
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
We need to choose ACPI tables properly depending on the device
model version we are running. Previously, this decision was
made by BIOS type specific code in hvmloader, e.g. always load
QEMU traditional specific tables if it's ROMBIOS and always
load QEMU Xen specific tables if it's SeaBIOS.
This change saves this behavior (for compatibility) but adds
an additional way (xenstore key) to specify the correct
device model if we happen to run a non-default one. Toolstack
bit makes use of it.
The enforcement of BIOS type depending on QEMU version will
be lifted later when the rest of ROMBIOS compatibility fixes
are in place.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Commit 149c6b unmasked an issue long present in Xen: the control/event
block addresses provided in the ACPI FADT table where hardcoded to the
V1 version. This was papered over because hvmloader would also always
set HVM_PARAM_ACPI_IOPORTS_LOCATION to 1 regardless of the BIOS
version.
The most notable issue caused by the above bug was that the QEMU
traditional GPE0 block was out of sync: the address provided in the
FADT didn't match the address QEMU was using.
Note that PM1a and TMR worked fine because the V1 address was
hardcoded in the FADT and HVM_PARAM_ACPI_IOPORTS_LOCATION was
unconditionally set to 1 by hvmloader.
Fix this by passing the address of the control/event blocks to
acpi_build_tables, so the values can be properly set in the FADT table
provided to the guest.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
find_next_rmrr(base) is used to find the lowest RMRR ending above base
but below 4G. Current method couldn't cover the following situation:
a. two rmrr exist, small gap between them
b. pci_mem_start and mem_resource.base is below the first rmrr.base
c. find_next_rmrr(pci_mem_start) will find the first rmrr
d. After aligning mem_resource.base to bar size,
first_rmrr.end < new_base < second_rmrr.base and
new_base + bar_sz > second_rmrr.base.
So the new bar will overlap with the second rmrr and doesn't overlap
with the first rmrr.
But the next_rmrr point to the first rmrr, then check_overlap() couldn't
find the overlap. Finally assign a wrong address to bar.
This patch using aligned new base to find the next rmrr, could fix the
above case and find all the overlapped rmrr with new base.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The version of SMBIOS set in the entry point is 2.4, however several
structures are missing fields required by 2.4. Fix this by adding the
missing fields, this is based on the documents found at the DMTF site
[0].
Most fields are set to 0 (undefined/not specified), except for the
cache related handlers that need to be initialized to 0xffff in order
to signal that the information is not provided.
[0] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.1.1.pdf
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported by: Chris Gilbert <chris.gilbert@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
We need to choose ACPI tables and ACPI IO port location
properly depending on the device model version we are running.
Previously, this decision was made by BIOS type specific
code in hvmloader, e.g. always load QEMU traditional specific
tables if it's ROMBIOS and always load QEMU Xen specific
tables if it's SeaBIOS.
This change saves this behavior (for compatibility) but adds
an additional way (xenstore key) to specify the correct
device model if we happen to run a non-default one. Toolstack
bit makes use of it.
The enforcement of BIOS type depending on QEMU version will
be lifted later when the rest of ROMBIOS compatibility fixes
are in place.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Allow setting system enclosure asset tag for HVM guest. Guest OS can
check and perform desired operation like support installation.
Also added documentation of '~/bios-string/*' xenstore keys into
docs/misc/xenstore-paths.markdown
Signed-off-by: Vivek Kumar Chaubey <vivekkumar.chaubey@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If the default compiler silently defaults to to -fPIC/-fPIE building
rombios fails:
ld -melf_i386 -s -r 32bitbios.o tcgbios/tcgbiosext.o util.o pmm.o -o 32bitbios_all.o
There are undefined symbols in the BIOS:
U _GLOBAL_OFFSET_TABLE_
make[10]: *** [Makefile:26: 32bitbios_all.o] Error 11
Prevent the failure by enforcing non-PIC/PIE mode.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
After rombios transfers the data for a write, it checks the status and
fails if BSY is set. qemu-trad doesn't set BSY for PIO writes, but QEMU
upstream does, and this causes rombios to fail writes because they are
marked as BSY. Instead, wait for BSY to clear after a write.
INT 13 writes are probably rarely used these days, but they are used by
GRUB 2 to write to its environment file which happens by default on
Ubuntu.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The condition: if there is a space in the ring then wait for the producer
to fill the ring also evaluates to true even if the ring if full. It
leads to a deadlock where producer is waiting for consumer
to consume the items and consumer is waiting for producer to fill the ring.
Fix for the issue: check if the ring is full and then break from
the loop to consume the items from the ring.
eg. case: prod = 1272, cons = 248.
Signed-off-by: Anshul Makkar <anshul.makkar@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
First of all limit the memory range used for testing to 4Mb: There's no
point placing page tables right above 8Mb when they can equally well
live at the bottom of the chunk at 4Mb - rep_io_test() cares about the
5Mb...7Mb range only anyway. In a subsequent patch this will then also
allow simply looking for an unused 4Mb range (instead of using a build
time determined one).
Extend the "skip tests" condition beyond the "is there enough memory"
question.
Reported-by: Charles Arnold <carnold@suse.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
The use of seabios defconfig kills boot performance of Windows guests
because the default is for the int13 handler to use PIO when accessing
the emulated IDE device.
By instead using a canned configuration with the ATA settings overridden
to enable DMA access (and also wider PIO) boot performance is markedly
improved without the need to use a different (and possibly not supported)
device model.
This patch adds the canned configuration into tools/firmware and modifies
the Makefile rule to copy it into place.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The present way of setting this up is flawed: Leaving the I/O bitmap
pointer at zero means that the interrupt redirection bitmap lives
outside (ahead of) the allocated space of the TSS. Similarly setting a
TSS limit of 255 when only 128 bytes get allocated means that 128 extra
bytes may be accessed by the CPU during I/O port access processing.
Introduce a new HVM param to set the allocated size of the TSS, and
have the hypervisor actually take care of setting namely the I/O bitmap
pointer. Both this and the segment limit now take the allocated size
into account.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
At the moment this flag is unconditionally set for PVHv2 domains. Note that
using this boot flag requires that the FADT table revision is at least 5.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Update the structure of the FADT table to version 5, and use that version for
PVHv2 guests. Note that HVM guests will continue to use FADT 4. In order to do
this, add a new field to acpi_config that contains the ACPI revision to use by
libacpi. Note that currently this only applies to the FADT.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
There is no reason to build, for example, dsdt_pvh.asl for hvmloader. We
pass which DSDTs to build via DSDT_FILES parameter.
If DSDT_FILES is empty all DSDTs for a particular architecture will be built.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
We now have permission from Lenovo to relicense commit 801d469ad8
("[HVM] ACPI support patch 3 of 4: ACPI _PRT table") to LGPLv2.1
This essentially means reverting commits c3397311a6 ("acpi: Prevent
GPL-only code from seeping into non-GPL binaries") and 26c4f0b8a4
("tools/libacpi: fix sed usage")
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ken Lancaster <klancaster@lenovo.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
The current commit in tree is rather old. It has come to a point that
cherry-picking commits from upstream isn't trivial anymore.
There is long term plan to track ipxe upstream, but for 4.8 release, we
should just update ipxe to a newer commit (they are using rolling
release model now).
Forward-port the one boot prompt patch that is still relevant and retire
the rest which are already in upstream.
Reported-by: Juergen Schinker <ba1020@homie.homelinux.net>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In prepearation to moving acpi sources into generally available
libacpi:
1. Pass IOAPIC/LAPIC/PCI mask values via struct acpi_config
2. Modify include files search paths to point to acpi directory
3. Macro-ise include file for build.c that defines various
utilities used by that file. Users of libacpi will be expected
to define this macro when compiling build.c
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
ACPI sources will be available to various component which will build
them according to their own rules. ACPI's Makefile will only generate
necessary source files.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Non-hvmloader users may be building tables in virtual address space
and therefore we need to make sure that values that end up in tables
are physical addresses.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Jan Beulich
Roger Pau Monné
Wei Liu
Andrew Cooper
Konrad Rzeszutek Wilk
Ian Jackson
Chao Gao
Igor Druzhinin
Xiong Zhang
Vivek Kumar Chaubey
Petre Pircalabu
Olaf Hering
Bernhard M. Wiedemann
Ross Lagerwall
Anshul Makkar
Paul Durrant
Boris Ostrovsky