- force use of physical APIC mode if indicated so (as we don't support
xAPIC cluster mode, the respective flag is taken to force physical
mode too)
- don't use MSI if indicated so (implies no IOMMU)
Both can be overridden on the command line, for the MSI case this at
once adds a new command line option allowing to turn off PCI MSI (IOMMU
and HPET are unaffected by this).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
First draft specification document it as a 64bit counter, now are a 128bit
value handled as a couple of 64bit values.
Allow to disable the device is values are all zeroes.
Add documentation for platform/generation-id key.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
- If videoram setting is less than 8 mb shows error and exit.
- Added videoram setting for qemu upstream with cirrus (added in qemu 1.3).
- Updated xl.cfg man.
- Default and minimal videoram changed to 16 mb if stdvga is set and upstream
qemu is being used. This is required by qemu 1.4 to avoid a xen memory error
(qemu 1.3 doesn't complain about it, probably buggy).
Signed-off-by: Fabio Fantoni <fabio.fantoni@heliman.it>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Usage:
vga="stdvga"|"cirrus"
- Default option is cirrus.
- Prints error and exit if unknown value is passed.
- stdvga parameter is now deprecated.
- Updated xl.cfg man.
Signed-off-by: Fabio Fantoni <fabio.fantoni@heliman.it>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch introduces support for two new parameters in libxl:
smbios_firmware=<path_to_smbios_structures_file>
acpi_firmware=<path_to_acpi_tables_file>
The changes are primarily in the domain building code where the firmware files
are read and passed to libxc for loading into the new guest. After the domain
building call to libxc, the addresses for the loaded blobs are returned and
written to xenstore.
LIBXL_HAVE_FIRMWARE_PASSTHROUGH is defined in libxl.h to allow users to
determine if the feature is present.
This patch also updates the xl.cfg man page with descriptions of the two new
parameters for firmware passthrough.
Signed-off-by: Ross Philipson <ross.philipson@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
libxl_domain_suspend is already prepared to handle LIBXL_SUSPEND_DEBUG,
and xl migrate handles the -d switch as well. Pass this flag down to
libxl_domain_suspend, so that finally xc_domain_save can dump huge
amount of debug data to stdout.
Update xl.1 and help text output.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
26470:acaf29203cf9 missed a bunch of hardcoded paths, e.g. in the
initscripts. I think at this juncture it is appropriate to revert
this change and try again after some more testing.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
It is sometimes hard to discover all the optional tools that should be
on a system to build all available Xen documentation. By checking for
documentation generation tools at ./configure time and displaying a
warning, Xen packagers will more easily learn about new optional build
dependencies, like markdown, when they are introduced.
Based on a patch by Matt Wilson. Changed to use a separate
docs/configure which is called from the top-level in the same manner
as stubdoms.
Rerun autogen.sh and "git add docs/configure" after applying this patch.
Signed-off-by: Matt Wilson <msw@amazon.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
(For the change to introduce docs/configure)
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
In the 300+ page PDF this produces I couldn't see anything which
wasn't the autogenerated doxygen boilerplate stuff.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This document is about an old unmaintained version of the XenAPI,
which bears little to no relation to what is implemented in xapi and
which is only partially implemented in xend (which is deprecated). The
doc hasn't seen much in the way of updates since 2009.
Anyone who is actually interested can continue to use the version
which was in 4.2.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Stub domains now use autoconf to build.
This configure script can enable or disable specific domains
and also specify custom download locations for stubdom library
packages. See ./configure --help for details.
C and Caml are disabled by default. vtpm-stubdom is conditional
on the presense of cmake.
Rename vtpmmgrdom to vtpmmgr-stubdom
Also update .*ignore
Signed-off-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Because the FLASK XSM module no longer checks IS_PRIV for remote
domain accesses covered by XSM permissions, domains now have the
ability to perform memory management and other functions on all
domains that have the same type. While it is possible to prevent this
by only creating one domain per type, this solution significantly
limits the flexibility of the type system.
This patch introduces a domain type transition to represent a domain
that is operating on itself. In the example policy, this is
demonstrated by creating a type with _self appended when declaring a
domain type which will be used for reflexive operations. AVCs for a
domain of type domU_t will look like the following:
scontext=system_u:system_r:domU_t
tcontext=system_u:system_r:domU_t_self
This change also allows policy to distinguish between event channels a
domain creates to itself and event channels created between domains of
the same type.
The IS_PRIV_FOR check used for device model domains is also no longer
checked by FLASK; a similar transition is performed when the target is
set and used when the device model accesses its target domain.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
At least certain Marvell SATA controllers are known to issue bus master
requests with a non-zero function as origin, despite themselves being
single function devices.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: "Zhang, Xiantao" <xiantao.zhang@intel.com>
Allow a domain to be built under one security label and run using a
different label. This can be used to prevent the domain builder or
control domain from having the ability to access a guest domain's memory
via map_foreign_range except during the build process where this is
required.
Example domain configuration snippet:
seclabel='customer_1:vm_r:nomigrate_t'
init_seclabel='customer_1:vm_r:nomigrate_t_building'
Note: this does not provide complete protection from a malicious dom0;
mappings created during the build process may persist after the relabel,
and could be used to indirectly access the guest's memory. However, if
dom0 correctly unmaps the domain upon building, a the domU is protected
against dom0 becoming malicious in the future.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
If the user has set a vnc display number both in vnclisten (with
"xxxx:yy"), and with vncdisplay, throw an error.
Update man pages to match.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch adds vtpm support to libxl. It adds vtpm parsing to config
files and 3 new xl commands:
vtpm-attach
vtpm-detach
vtpm-list
Signed-off-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Make xl/libxl accept the long option --wait for -w to be compatible with xm.
The long options are used in the default init and sysconfig scripts.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
We gate the whole of the "txt" target on pod2text. I think this is
better than gating only the pod-generated outputs; it avoids a partial
output tree.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
These product numbers are used by the QEMU blacklisting protocol in
traditional QEMU and are currently coded directly into the xenstore.c
source module. Since there are now multiple QEMUs this information
should be pulled into a public header to avoid duplication/conflict.
hvm-emulated-unplug.markdown has also been adjusted to reference the
new header.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
The sched_credit_default_yield option was added when the behavior of
"SCHEDOP_yield" was changed in 4.1, to allow any users who had
problems to revert to the old behavior. The new behavior has been in
Xen.org xen since 4.1, and in XenServer even longer, and there is no
evidence of anyone having trouble with it. Remove the option.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This is based upon my inspection of a system with a single PV domain
and a single HVM domain running and is therefore very incomplete.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is a port of Linux'es intel-idle driver serving the same purpose.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Some highlights:
* Correct some markup errors:
Around line 663:
'=item' outside of any '=over'
Around line 671:
You forgot a '=back' before '=head3'
* Add documentation for msitranslate, power_mgnt, acpi_s3, aspi_s4,
gfx_passthru, nomigrate, etc.
* Reorganize items in "unclassified" sections like cpuid,
gfx_passthru to where they belong
* Correct link L<> references so they can be resolved within the
document
* Remove placeholders for deprecated options device_model and vif2
* Remove placeholder for "sched" and "node", as these are options for
cpupool configuration. Perhaps cpupool configuration deserves
a section in this document.
* Rename "global" options to "general"
* Add section headers to group general VM options.
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Print an error and exit if backend!=0 is used in conjunction with
run_hotplug_scripts. Currently libxl can only execute hotplug scripts
from the toolstack domain (the same domain xl is running from).
Added a description and workaround of this issue on
xl-network-configuration.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Namely when making use the CONFIG_XEN_COMPAT_* options in the legacy
Linux kernels, newer kernels may not be compatible with older
hypervisors, so trying to boot such a combination makes little sense.
Booting older kernels on newer hypervisors, however, has to always
work.
With the way xen.efi looks for its configuration file, allowing
individual configuration files to refer only to compatible kernels,
and referring from an older- to a newer-hypervisor one (the kernels
of which will, as said, necessarily be compatible with the older
hypervisor) allows to greatly reduce redundancy at least in
development environments where one frequently wants multiple
hypervisors and kernles to be installed in parallel.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Allow intermediate parts of the command line options to be absent
(expressed by two immediately succeeding commas).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
The dom0_max_vcpus command line option only allows the exact number of
VCPUs for dom0 to be set. It is not possible to say "up to N VCPUs
but no more than the number physically present."
Allow a range for the option to set a minimum number of VCPUs, and a
maximum which does not exceed the number of PCPUs.
For example, with "dom0_max_vcpus=4-8":
PCPUs Dom0 VCPUs
2 4
4 4
6 6
8 8
10 8
Existing command lines with "dom0_max_vcpus=N" still work as before
(and are equivalent to dom0_max_vcpus=N-N).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Committed-by: Jan Beulich <jbeulich@suse.com>
This patch corrects the following errors produced by pod2man:
Hey! The above document had some coding errors, which are explained
below:
Around line 301:
You can't have =items (as at line 305) unless the first thing after
the =over is an =item
Around line 311:
'=item' outside of any '=over'
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
gfx_passthru: Document gfx_passthru makes the GPU become primary in the guest
and other generic info about gfx_passthru.
Signed-off-by: Pasi Kärkkäinen <pasik@iki.fi>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
I'm sure they aren't perfect but various people have done a pass over
them recently and they are much improved. I don't think we need to
continue to describe them so pessimistically.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
- videoram: Document that only qemu-xen-traditional device-model currently
supports changing the amount of video memory for stdvga graphics device.
- videoram: Better document the default amount of videoram for both stdvga
and Cirrus.
- stdvga: Add a note that stdvga allows bigger amount of videoram and
bigger resolutions.
Signed-off-by: Pasi Kärkkäinen <pasik@iki.fi>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Jan Beulich