IRQ is of unsigned type so %u should be used. When printing domain id,
%pd should be the correct format to maintain the consistency.
Also, wherever possible, reduce the number of split lines for printk().
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
From map_dt_irq_to_domain() we are assigning a return code of
map_irq_to_domain() to a variable without checking it for an error.
Fix it by propagating the return code directly since this is the last
call.
Fixes: 467e5cbb2f ("xen: arm: consolidate mmio and irq mapping to dom0")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
At the moment, even in case of a SMMU being I/O coherent, we clean the
updated PT as a result of not advertising the coherency feature. SMMUv3
coherency feature means that page table walks, accesses to memory
structures and queues are I/O coherent (refer ARM IHI 0070 E.A, 3.15).
Follow the same steps that were done for SMMU v1,v2 driver by the commit:
080dcb781e
The same restrictions apply, meaning that in order to advertise coherent
table walk platform feature, all the SMMU devices need to report coherency
feature. This is because the page tables (we are sharing them with CPU)
are populated before any device assignment and in case of a device being
behind non-coherent SMMU, we would have to scan the tables and clean
the cache.
It is to be noted that the SBSA/BSA (refer ARM DEN0094C 1.0C, section D)
requires that all SMMUv3 devices support I/O coherency.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
[julien: Add __ro_after_init]
Reviewed-by: Julien Grall <jgrall@amazon.com>
Being able to access a real board with real resources gives a great
opportunity to finally test passthroughing devices to guests. Therefore,
create a new Xilinx job to test GEM (Gigabit Ethernet MAC) controller
passthrough to a dom0less domU.
By passing "gem-passthrough" as a test variant, the test will instruct
the ImageBuilder to use "eth0.dtb" (passthrough dtb stored under tftp
server root) as a guest dtb and to add "xen,passthrough" dtb property to
"/amba/ethernet@ff0e0000" node. The guest itself will try to bringup
the network interface, obtain dynamically IP address and ping the default
gateway.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, setting up a network bridge is unconditionally placed
in the dom0 xen.start script. Since we might want to use the network
interface (there is only one working GEM on the board) for other tests
(e.g. passthrough), move the bridge setup to a dom0_check variable being
part of a default ping test (i.e. if no test variant specified).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
>From vpl011_rx_char_xen(), we call vpl011_data_avail() that handles both
RX and TX state. Because we are passing 0 as out_fifo_level and
SBSA_UART_FIFO_SIZE as out_size, we end up calling a function
vpl011_update_tx_fifo_status() which performs TXI bit handling
depending on the FIFO trigger level. This does not make sense when backend
is in Xen, as we maintain a single TX state where data can always be
written and as such there is no TX FIFO handling. Furthermore, this
function assumes that the backend is in domain by making use of struct
xencons_interface unconditionally. Fix it by calling this function only
when backend is in domain. Also add an assert for sanity.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Henry Wang <Henry.Wang@arm.com>
When backend is in Xen, the handling of data written to DR register is a
bit special because we want to tell guest that we are always ready for new
data to be written (i.e. no real FIFO, TXFF/BUSY never set and TXI always
set). This conflicts with the current handling of TXFE bit, which we
always clear and never set on a write path (we happen to set it when we
receive char from serial input due to use of vpl011_data_avail() but this
might never be called). This can lead to issues if a guest driver makes
use of TXFE bit to check for TX transmission completion (such guest could
then wait endlessly). Fix it by keeping TXFE always set to match the
current emulation logic.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Henry Wang <Henry.Wang@arm.com>
Tested-by: Henry Wang <Henry.Wang@arm.com>
In both vpl011_read_data() and vpl011_read_data_xen(), there is a comment
stating that the guest is expected to read the DR register only if the
TXFE bit of FR register is not set. This is obviously logically wrong and
it should be RXFE (i.e. RX FIFO empty bit set -> nothing to read).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Henry Wang <Henry.Wang@arm.com>
When vgic_reserve_virq() fails and backend is in domain, we should also
free the allocated event channel.
When backend is in Xen and call to xzalloc() returns NULL, there is no
need to call xfree(). This should be done instead on an error path
from vgic_reserve_virq(). Moreover, we should be calling XFREE() to
prevent an extra free in domain_vpl011_deinit().
In order not to repeat the same steps twice, call domain_vpl011_deinit()
on an error path whenever there is more work to do than returning rc.
Since this function can now be called from different places and more
than once, add proper guards, use XFREE() instead of xfree() and move
vgic_free_virq() to it.
Take the opportunity to return -ENOMEM instead of -EINVAL when memory
allocation fails.
Fixes: 1ee1e4b0d1 ("xen/arm: Allow vpl011 to be used by DomU")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
We are assigning return code of domain_vpl011_init() to a variable
without checking it for an error. Fix it.
Fixes: 3580c8b2df ("xen/arm: if direct-map domain use native UART address and IRQ number for vPL011")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
At the moment, we direct serial input to hardware domain by default.
This does not make any sense when running in true dom0less mode, since
such domain does not exist. As a result, users wishing to write to
an emulated UART of a domU are always forced to execute CTRL-AAA first.
The same issue is when rotating among serial inputs, where we always
have to go through hardware domain case. This problem can be elaborated
further to all the domains that no longer exist.
Modify switch_serial_input() so that we skip switching serial input to
non existing domains. Take the opportunity to define and make use of
macro max_console_rx to make it clear what 'max_init_domid + 1' means
in the console code context. Also, modify call to printk() to use correct
format specifier for unsigned int.
For now, to minimize the required changes and to match the current
behavior with hwdom, the default input goes to the first real domain.
The choice is more or less arbitrary since dom0less domUs are supposedly
equal. This will be handled in the future by adding support in boot time
configuration for marking a specific domain preferred in terms of
directing serial input to.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Despite being a matter of taste, in general, there are two main approaches
when dealing with code tagging: tree-wide, where all the sources are taken
into account or config-wide, when considering Kconfig options and actually
built files. At the moment, all_sources variable is defined using SUBDIRS,
which lists all the directories except arch/, where only $(TARGET_ARCH)
is taken into account. This makes it difficult to reason about and creates
fuzzy boundaries being a blocker when considering new directories that
might be config-dependent (like crypto/ which is missing in SUBDIRS).
For now, switch to the intermediate solution to list all the directories
in SUBDIRS without exceptions (also include crypto/). This way, the
approach taken is clear allowing new directories to be listed right away
without waiting to fix the infrastructure first. In the future, we can
then add support for config-wide approach.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add missing aliases for:
- debian:unstable-cppcheck
- debian:unstable-arm64v8-arm32-gcc
- ubuntu:bionic
Remove aliases for no longer used containers:
- centos:7.2
- debian:unstable-arm32-gcc
Modify docs to refer to CentOS 7 instead of 7.2 not to create confusion.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Add a debian container with cppcheck installation routine inside,
capable of performing cppcheck analysis on Xen-only build including
cross-builds for arm32 and x86_64.
Populate build jobs making use of that container to run cppcheck
analysis to produce a text report (xen-cppcheck.txt) containing the list
of all the findings.
This patch does not aim at performing any sort of bisection. Cppcheck is
imperfect and for now, our goal is to at least be aware of its reports,
so that we can compare them with the ones produced by better tools and
to be able to see how these reports change as a result of further
infrastructure improvements (e.g. exception list, rules exclusion).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This might be helpful in providing additional debugging information (in
most cases, at least to distinguish -EINVAL from -ENOMEM), so modify the
code to include printing return code in panic message. In create_dom0,
move the call to alloc_dom0_vcpu0() to a separate condition and call a
meaningful panic message.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a new test job qemu-smoke-dom0less-arm32-gcc-without-dom0 in debug
and non-debug variant that will execute qemu-smoke-dom0less-arm32.sh
script to test dom0less domU boot without dom0 (i.e. true dom0less
configuration).
By passing "without-dom0" as a test variant, the test will clear the
dom0 prompt that we grep for as a last step and remove all the DOM0
related options in ImageBuilder configuration.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Xen supports booting gzip compressed kernels, therefore add a new test
job qemu-smoke-dom0less-arm32-gcc-gzip in debug and non-debug variant
that will execute qemu-smoke-dom0less-arm32.sh script to test booting
a domU with a gzip compressed kernel image (in our case zImage).
By passing "gzip" as a test variant, the test will call gzip command
to compress kernel image and use it in ImageBuilder configuration for
domU1. No need for a specific check to be executed from domU. Being able
to see a test message from a boot log is sufficient to mark a test as
passed.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a new test job qemu-smoke-dom0less-arm32-gcc-staticmem in debug
and non-debug variant that will execute qemu-smoke-dom0less-arm32.sh
script to test static memory allocation feature. The test case itself
is directly taken from dom0less arm64 testing.
Populate build jobs to compile Xen with config options necessary to
enable static memory feature. Populate test jobs passing "static-mem"
as a test variant. The test configures domU with a static memory region
(direct-mapped) and adds a check using /proc/iomem to determine the
memory region marked as "System RAM".
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, we only perform a single arm32 test in our CI, checking
whether dom0 boots successfully or not. This is mostly because we do not
have any arm32 runners and we only execute a hypervisor only build.
In order not to leave the arm32 testing in such a poor state, add a
script qemu-smoke-dom0less-arm32.sh to start testing dom0less
configuration, while keeping dom0 to make the test more interesting.
The script is mostly based on the one used for dom0 arm32 testing as well
as the one used for dom0less arm64 testing. We obtain Debian Bullseye
kernel and Alpine Linux busybox-based rootfs. Depending on the test
variant, we prepare a test case contained within domU_check variable,
that will be executed as part of /init script from domU rootfs.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Due to the limited x86 CI resources slowing down the whole pipeline,
switch the arm32 cross builds to be executed on arm64 which is much more
capable. For that, rename the existing debian container dockerfile
from unstable-arm32-gcc to unstable-arm64v8-arm32-gcc and use
arm64v8/debian:unstable as an image. Note, that we cannot use the same
container name as we have to keep the backwards compatibility.
Take the opportunity to remove extra empty line at the end of a file.
Modify the tag of .arm32-cross-build-tmpl to arm64 and update the build
jobs accordingly.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, Xen does not support booting gzip compressed uImages.
This is because we are trying to decompress the kernel before probing
the u-boot header. This leads to a failure as the header always appears
at the top of the image (and therefore obscuring the gzip header).
Move the call to kernel_uimage_probe before kernel_decompress and make
the function self-containing by taking the following actions:
- take a pointer to struct bootmodule as a parameter,
- check the comp field of a u-boot header to determine compression type,
- in case of compressed image, call kernel_decompress passing uImage
header size as an offset to gzip header,
- set up zimage.{kernel_addr,len} accordingly,
- return -ENOENT in case of a u-boot header not found to distinguish it
amongst other return values and make it the only case for falling
through to try to probe other image types.
Modify kernel_decompress to take an additional parameter being an offset
to a gzip header from start address. This is needed so that a function
can first operate on a region containing actually compressed kernel (in case
of compressed uImage, size of u-boot header is an offset to a gzip header)
and then at the end pass the entire region (as it was before taking an offset
into account) to fw_unreserved_regions for freeing.
This approach avoids splitting the uImage probing into 2 stages (executed
before and after decompression) which otherwise would be necessary to
properly parse header, update boot module start and size before
decompression and update zimage.{kernel_addr,len} afterwards.
Remove the limitation from the booting.txt documentation.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewwed-by: Julien Grall <jgrall@amazon.com>
In a follow-up patch, we will be calling kernel_decompress function from
within kernel_uimage_probe to support booting compressed images with
u-boot header. Therefore, move the kernel_uimage_probe definition after
kernel_decompress so that the latter is visible to the former.
No functional change intended.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Acked-by: Julien Grall <jgrall@amazon.com>
At the moment, the static-mem check relies on the way Xen exposes the
memory banks in device tree. As this might change, the check should be
modified to be generic and not to rely on device tree. In this case,
let's use /proc/iomem which exposes the memory ranges in %08x format
as follows:
<start_addr>-<end_addr> : <description>
This way, we can grep in /proc/iomem for an entry containing memory
region defined by the static-mem configuration with "System RAM"
description. If it exists, mark the test as passed. Also, take the
opportunity to add 0x prefix to domu_{base,size} definition rather than
adding it in front of each occurence.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
The amount of supported physical memory depends on the frametable size
and the number of struct page_info entries that can fit into it. Define
a macro PAGE_INFO_SIZE to store the current size of the struct page_info
(i.e. 56B for arm64 and 32B for arm32) and add a sanity check in
setup_frametable_mappings to be notified whenever the size of the
structure changes. Also call a panic if the calculated frametable_size
exceeds the limit defined by FRAMETABLE_SIZE macro.
Update the comments regarding the frametable in asm/config.h.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
This macro is unused and the corresponding one for arm64 has already
been removed as part of the commit 6dc9a1fe98 ("xen/arm: Remove most
of the *_VIRT_END defines").
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The direct mapped area occupies L0 slots from 256 to 265 included
(i.e. 10 slots), resulting in 5TB (512GB * 10) of virtual address space.
However, due to incorrect slot subtraction (we take 9 slots into account)
we set DIRECTMAP_SIZE to 4.5TB instead. Fix it.
Note that we only support up to 2TB of physical memory so this is
a latent issue.
Fixes: 5263507b1b ("xen: arm: Use a direct mapping of RAM on arm64")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Printing memory size in hex without 0x prefix can be misleading, so
add it. Also, take the opportunity to adhere to 80 chars line length
limit by moving the printk arguments to the next line.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Acked-by: Julien Grall <jgrall@amazon.com>
At the moment, for dom0less domUs, we do not have a way to specify
per domain grant table related limits (unlike when using xl), namely
max version, max number of grant frames, max number of maptrack frames.
This means that such domains always use the values specified by the Xen
command line parameters or their default values if unspecified.
In order to have more control over dom0less domUs, introduce the
following device-tree properties that can be set under domUs nodes:
- max_grant_version to set the maximum grant table version the domain
is allowed to use,
- max_grant_frames to set the maximum number of grant frames the domain
is allowed to have,
- max_maptrack_frames to set the maximum number of grant maptrack frames
the domain is allowed to have.
Update documentation accordingly.
Note that the values obtained from device tree are of type uint32_t,
whereas the d_cfg.max_{grant_frames,maptrack_frames} are of type int32_t.
Call panic in case of overflow. Other sanity checks are already there in
grant_table_init() resulting in panic in case of errors, therefore no
need to repeat them in create_domUs().
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add test jobs in both debug and non-debug versions to run hyp-xen-version
XTF test as a dom0less domU on arm64. The purpose of this test is to
validate the functional behavior of xen_version hypercall.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Introduce support for using XTF on Arm to perform low-level testing.
For the purpose of the CI testing, let's use the fork [1] from upstream
XTF with implemented support for arm64 (the upstream XTF only supports
x86).
Add a new script under automation/scripts to be used by the CI XTF test
jobs to perform the following tasks:
- Compiling XTF,
- Generating u-boot script using ImageBuilder,
- Running Xen with XTF as domU in pure dom0less configuration using Qemu,
- Checking test result.
The script takes the name of the XTF test to run as a first parameter.
[1] https://gitlab.com/xen-project/fusa/xtf.git (branch xtf-arm)
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Populate test jobs for Yocto based tests using the provided containers.
Due to the size restrictions, it is currently not possible to split the
build and run tasks, therefore everything is done in a single step.
Test jobs for the supported Yocto targets are generic to avoid the
necessity to add new ones after each Yocto release. The only thing
required to be changed after updating the containers is the variable
YOCTO_VERSION stored in a .yocto-test template.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Now, when these packages are already installed in the respective
containers, we can remove them from the test scripts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Installation of additional packages from the test scripts when running
the tests has some drawbacks. It is slower than cloning containers and can
fail due to some network issues (apparently it often happens on x86
rackspace). This patch is adding the packages required by the tests to be
installed when building the containers.
>From qemu-alpine-x86_64.sh into debian:stretch:
- cpio,
- busybox-static.
>From qemu-smoke-*-{arm,arm64}.sh into debian:unstable-arm64v8:
- u-boot-qemu,
- u-boot-tools,
- device-tree-compiler,
- curl,
- cpio,
- busybox-static.
The follow-up patch will remove installation of these packages from the
test scripts. This is done in order not to break the CI in-between.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, we route NS phys timer IRQ to Xen even though it does not
make use of this timer. Xen uses hypervisor timer for itself and the
physical timer is fully emulated, hence there is nothing that can trigger
such IRQ. This means that requesting/releasing IRQ ends up as a deadcode
as it has no impact on the functional behavior, whereas the code within
a handler ends up being unreachable. This is a left over from the early
days when the CNTHP IRQ was buggy on the HW model used for testing and we
had to use the CNTP instead.
Remove the calls to {request/release}_irq for this timer as well as the
code within the handler. Since timer_interrupt handler is now only used
by the CNTHP, refactor it as follows:
- rename it to htimer_interrupt to reflect its purpose,
- remove the IRQ affiliation test,
- invert the condition to avoid indented code and use unlikely,
- improve readability by adding new lines \btw code and comments.
Keep the calls to zero the CNTP_CTL_EL0 register for sanity and also
remove the corresponding perf counter definition.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
A build failure [1] is observed if CONFIG_VGA (and thus CONFIG_VIDEO) is
not set. This is because XENPF_get_dom0_console cmd of platform hypercall
makes a call to fill_console_start_info, which is defined in video/vga.c
and built only if CONFIG_VGA is set.
To fix this issue, protect XENPF_get_dom0_console with CONFIG_VIDEO
ifdefery.
[1]:
ld: prelink.o: in function `do_platform_op':
(.text.do_platform_op+0x1a7): undefined reference to `fill_console_start_info'
Fixes: 4dd160583c ("x86/platform: introduce hypercall to get initial video console settings")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
MISRA C rule 4.2 states that trigraphs (sequences of two question marks
followed by a specified third character [=/'()!<>-]) should not be used.
This applies to both code and comments. Thankfully, we do not use them
in the code, but still there are some comments where they are
accidentally used. Fix it.
With regards to the comments and respective macros in pci_regs.h, these
were inherited from Linux. Let's knowingly accept the divergence.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, early printk code for pl011 uses a hardcoded value
for 8n1 LCR configuration. Define and use macro WLEN_8 for that purpose
(no parity and 1 stop bit are defined as 0).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Julien Grall <julien@xen.org>
Make use of the macros defined in asm/pl011-uart.h instead of hardcoding
the values. Also, take the opportunity to fix the file extension in a
top-level comment.
No functional change intended.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
early_uart_init macro is only used if CONFIG_EARLY_UART_INIT is set.
This config option depends on EARLY_UART_PL011, so there is no point
in defining it for MESON, especially if it is empty. Remove it and adapt
the existing comment.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Julien Grall <julien@xen.org>
When creating direct mapped domU, the vIRQ for vpl011 is taken from
the SERHND_DTUART serial port using serial_irq. This function can return
-1 (i.e. no interrupt found) in which case we should call a panic.
However, vpl011_virq is defined as unsigned int which causes the panic
to be unreachable, because less than zero comparison of an unsigned value
can never be true. Fix it by defining vpl011_virq as int.
Fixes: 3580c8b2df ("xen/arm: if direct-map domain use native UART address and IRQ number for vPL011")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
At the moment, we define lots of test jobs in test.yaml, that make use
of the same configuration sections like variables, tags, artifacts.
Introduce templates (hidden jobs whose names start with a dot) to
reduce the overhead and simplify the file (more than 100 lines saved).
This way, the actual jobs can only specify sections that are unique
to them.
Most of the test jobs specify the same set of prerequisite jobs under
needs property with just one additional being unique to the job itself.
Introduce YAML anchors for that purpose, because when using extends, the
needs property is not being merged (the parent property overwrites the
child one).
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
After qemu arm64 test scripts had been renamed to reflect their
usage, do the same for the qemu arm32 test script. Currently it only
boots dom0, so we can assume that this script will be used to perform
dom0 based testing. In the future we will be able to create corresponding
script qemu-smoke-dom0less-arm32.sh to perform dom0less based testing.
This is the last step to get rid of ambiguity with regards to naming
of Arm test scripts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
qemu-alpine-arm64.sh script is used to perform dom0 based testing.
Rename this script to qemu-smoke-dom0-arm64.sh to reflect its usage.
Also rename the corresponding test jobs.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Testing arm64 is done using the qemu-alpine-arm64.sh and
qemu-smoke-arm64.sh scripts. These scripts are executed with exactly
the same artifacts (container, rootfs, kernel, qemu) and the only
difference is that the former is used to perform dom0 based testing
and the latter - dom0less based testing.
Because the current naming is quite ambiguous, rename qemu-smoke-arm64.sh
script to qemu-smoke-dom0less-arm64.sh to reflect its usage.
qemu-alpine-arm64.sh will be renamed in the follow-up patch.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Perform the following cleanup:
- rename the device tree from virt-gicv3 to virt-gicv2 as the GIC version
used in this test is v2,
- use fdtput to perform modifications on the dtb,
- use DEBIAN_FRONTEND=noninteractive to prevent interactive prompt being
stuck waiting for answer other than "yes",
- fix the number of cpus in the device tree because currently we generate
it with a single cpu and try to run QEMU with two,
- fix the memory size we pass when generating QEMU device tree as it does
not match the memory size with what we run QEMU.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Take an example from arm64 qemu test scripts and use ImageBuilder
to generate u-boot script automatically. Calculating the addresses
manually is quite error prone and also we will be able to benefit
from using ImageBuilder when adding domUs to this test in the future.
Install and use u-boot from the debian package.
Modify the script so that binaries are loaded from u-boot via tftp.
Remove dtuart=/pl011@9000000 because stdout-path in QEMU dtb is always
set to pl011 node path.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Script automation/scripts/containerize makes it easy to build Xen within
predefined containers from gitlab container registry. This script is
currently missing the helpers to select Arm containers, so populate the
necessary entries.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
At the moment, all the tests are executed on non-debug Xen builds.
To improve the coverage (e.g. we might catch some asserts), add new
test jobs using debug Xen builds.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
In the follow-up patch we will add new jobs using debug Xen builds.
Because the debug builds take more space and we might end up in
a situation when there is not enough free space (especially during
a static memory test that reserves some region in the middle), increase
RAM size for QEMU from 1GB to 2GB.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
For arm64 we perform builds using debian and alpine containers.
We are missing the randconfig build jobs for the latter, so add them.
This way for each container we have 4 fundamental build jobs:
- defconfig non-debug/debug
- randconfig non-debug/debug
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Some time ago, Linux switched the format of docs to ReST and the format
of device-tree bindings to json-schema.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
All the build jobs exist in two flavors: debug and non-debug, where the
former sets 'debug' variable to 'y' and the latter to 'n'. This variable
is only being recognized by the toolstack, because Xen requires
enabling/disabling debug build via e.g. menuconfig/config file.
As a corollary, we end up building/testing Xen with CONFIG_DEBUG always
set to a default value ('y' for unstable and 'n' for stable branches),
regardless of the type of the build job.
Fix this behavior by setting CONFIG_DEBUG according to the 'debug' value.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
NULL scheduler is not enabled by default on non-debug Xen builds. This
causes the boot time cpupools test to fail on such build jobs. Fix the issue
by explicitly specifying the config options required to enable the NULL
scheduler.
Fixes: 36e3f41587 ("automation: Add a new job for testing boot time cpupools on arm64")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
At the moment, the information about allocating static shared memory
region is only printed during the debug build. This information can also
be helpful for the end user (which may not be the same as the person
building the package), so switch to printk(). Also drop XENLOG_INFO to be
consistent with other printk() used to print the domain information.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Currently, all the arm64 defconfig build jobs, regardless of the
container used, end up building Xen with the extra config options
specified in the main build script (e.g. CONFIG_EXPERT,
CONFIG_STATIC_MEMORY). Because these options are only needed for
specific test jobs, the current behavior of the CI is incorrect
as we add the extra options to all the defconfig builds. This means
that on arm64 there is not a single job performing proper defconfig build.
To fix this issue, add custom build jobs each time there is a need for
building Xen with additional config options. Introduce EXTRA_XEN_CONFIG
variable to be used by these jobs to store the required options. This
variable will be then read by the main build script to modify the .config
file. This will also help users to understand what is needed to run specific
test.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a new test job qemu-smoke-arm64-gcc-boot-cpupools that will execute
script qemu-smoke-arm64.sh to test boot time cpupools feature.
Enable CONFIG_BOOT_TIME_CPUPOOLS for the arm64 build and add a new test
case in qemu-smoke-arm64.sh that if selected will make use of the
ImageBuilder feature to create cpupool with cpu@1, null scheduler and
assign it to domU. Add a check in dom0 xen.start to see if domU is
assigned a Pool-1 with null scheduler.
Take the opportunity to refactor the qemu-smoke-arm64.sh script as
follows:
- use domU_check to store the test's commands to be run from domU
- use dom0_check to store the test's commands to be run from dom0
- use fdtput instead of sed to perform dtb modifications
- use more meaningful messages for "passed" variable. This way we can
grep for messages reported either by domU or dom0 and get rid of
assumption that tests can only be run from domU
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
During the ping test, dom1 tries to assign an ip to eth0 in a loop.
Before setting up the network interface by dom0, this results in
printing the following error message several times:
(XEN) DOM1: ifconfig: SIOCSIFADDR: No such device
Silence this by redirecting stderr/stdout to /dev/null as we do not
care about the output and we should not pollute the log file.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Ayan Kumar Halder <ayankuma@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
After qemu-smoke-arm64 was changed to use kernel 5.19 we end up having
two kernel configurations. This is something not needed and maintaining
a single kernel version is always easier. Modify qemu-alpine-arm64-gcc
to use kernel 5.19 and remove kernel 5.9 from tests-artifacts.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Ayan Kumar Halder <ayankuma@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Michal Orzel