Added autotools magic to replace custom check scripts. The previous
checks have been ported to autoconf, and some additional ones have
been added (plus the suggestions from running autoscan). Two files are
created as a result from executing configure script, config/Tools.mk
and config.h.
conf/Tools.mk is included by tools/Rules.mk, and contains most of the
options previously defined in .config, that can now be set passing
parameters or defining environment variables when executing configure
script.
config.h is only used by libxl/xl to detect yajl_version.h.
[ tools/config.sub and config.guess copied from
autotools-dev 20100122.1 from Debian squeeze i386,
which is GPLv2.
tools/configure generated using the included ./autogen.sh
which ran autoconf 2.67-2 from Debian squeeze i386. autoconf
is GPLv3+ but has a special exception for the autoconf output;
this exception applies to us and exempts us from complying
with GPLv3+ for configure, which is good as Xen is GPL2 only.
- Ian Jackson ]
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Tested-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Scanning the slot_to_gfn[] array for a free slot is expensive because
evict_pages() always needs to scan the whole array. Remember the last
slots freed during page-in requests and reuse them in evict_pages().
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Update functions to return -1 on error, 0 on success.
Simplify init_page() and make sure errno is assigned.
Adjust PERROR/ERROR usage, use PERROR early because it overwrites errno.
Adjust xenpaging_populate_page() to handle gfn as unsigned long.
Update xenpaging exit code handling. xenpaging_teardown cant possible
fail. Adjust mainloop to indicate possible errors to final exit.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
policy_choose_victim() is one of the bottlenecks in xenpaging. It is called
alot to find free bits in the fragmented bitmaps.
Reduce turnaround time by skipping longs with all bits set.
Adjust wrap detection in loop.
v2:
- fix copy&paste error, bitmap was tested twice
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Move all code to evict a single gfn into one function. This simplifies
error handling in caller. The function returns -1 on fatal error, 0 on
success and 1 if the gfn cant be paged.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Currently the command to flush the qemu cache is called alot if there
are no more pages to evict. This causes churn in the logfiles, and qemu
can not release more pages anyway since the last command.
Fix this by remembering the current number of paged-out gfns, if this
number did not change since the last flush command then sending another
new flush command will not free any more gfns.
Remove return code from xenpaging_mem_paging_flush_ioemu_cache() since
errors do not matter, and will be handled elsewhere. Also failure to
send the flush command is not fatal.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The main loop calls xenpaging_wait_for_event_or_timeout() unconditionally
before doing any work. This function calls poll() with a timeout of 100ms. As
a result the page-out process is very slow due to the delay in poll().
Call poll() without timeout so that it returns immediately until the page-out
is done. Page-out is done when either the policy finds no more pages to
nominate or when the requested number of pages is reached.
The condition is cleared when a watch event arrives, so that processing the
new target is not delayed once again by poll().
v2:
- no poll timeout also when large number of evicts is pending
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This change is based on an idea by <hongkaixing@huawei.com> and
<bicky.shi@huawei.com>.
Scanning the victims[] array is time consuming with a large number of
target pages. Replace the loop to find the slot in the pagefile which
holds the requested gfn with an index.
Remove the victims array and replace it with a flat array. This array
holds the gfn for a given slot in the pagefile. Adjust all users of the
victims array.
Rename variable in main() from i to slot to clearify the meaning.
Update xenpaging_evict_page() to pass a pointer to xen_pfn_t to
xc_map_foreign_pages().
Update policy_choose_victim() to return either a gfn or INVALID_MFN.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
LSB defines runlevel 4 as "reserved for local use, default is
normal/full multiuser"
The current behaviour of insserv in openSuSE 11.4 and SLES11SP2 is that
xencommons gets a symlink in /etc/init.d/rc4.d/ due to the 4 in the
Default-Start: line. As a result insserv will print a warning:
insserv: warning: current stop runlevel(s) (2 3 5) of script `xencommons' overwrites defaults (2 3 4 5).
Since the local admin is responsible to create all symlinks manually in
/etc/init.d/rc4.d/ the xencommons script should not automatically enable
itself in runlevel 4.
So, remove the 4 from Default-Start: line.
Note: This change will not automatically remove old/stale xencommon
symlinks in /etc/init.d/rc4.d/ during a package upgrade.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Correct wording and default value of autoballoon= in xl.conf(5)
to match code and supplied xl.conf.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
s/DEBUG/printk/ in test_xenbus and all associated do_*_test+xenbus_dbg_message
and always print the IRQ and MFN used by the xenbus on init.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: John McDermott <john.mcdermott@nrl.navy.mil>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch provide the code to set the VNC password to QEMU upstream through
VNC. The password is still stored in xenstore but will not be used by QEMU
upstream.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Just to use this function in more than one file.c.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This make things a bit easier.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Add a memset to the save_callbacks struct instance in libcheckpoint's
initialization code. New additions to the callback struct will not
need to add an explicit initialization (to NULL), to maintain
compatibility with older xend/remus based invocation of xc_domain_save.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add dummy entries for parsed but undocumented cfg file options to xl.cfg:
for i in `
grep -Ew 'xlu_cfg_get_(long|string|list|list_as_string_list)' tools/libxl/xl_cmdimpl.c | cut -f 2 -d '"' | sort -u
`
do
grep -wq $i docs/man/xl.cfg.pod.5 || echo $i
done
current output:
acpi_s3
acpi_s4
cpus
device_model
gfx_passthru
maxmem
nodes
sched
vif2
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Use correct string for gfx_passthru, and fix comment typo in xmexample.hvm
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
xl create -f domU.cfg does not need an equal sign.
This applies also to xl cpupool-create.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
When read() return 0, the current code just tries again. But this
leads to an infinite loop if QEMU died too soon.
Also, retry select if a signal was caught.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
NetBSD libxc hypercall implementation was returning -errno on error,
instead of the actual error value from ioctl. Returning error is
easier to understand, and the caller can always check errno.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Reported-by: Olaf Hering <olaf@aepfle.de>
Added a comment that explains why NetBSD return hypercall->retval on
success.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Reported-by: Olaf Hering <olaf@aepfle.de>
In xenpaging source code,there is an interdomain communication between dom0
and domU. In mem_event_enable(),the function alloc_unbound_xen_event_channel()
allocates a free port for domU, and then it will be bound with dom0.
When xenpaging tears down,it just frees dom0's event channel port by
xc_evtchn_unbind(), leaves domU's port still occupied.
So we add the patch to free domU's port when xenpaging exits.
We need double free interdomain eventchannel. First free domainU port,
and leave domain 0 port unbond, Then free domain 0 port.
Signed-off-by: Kaixing Hong <hongkaixing@huawei.com>,
Signed-off-by: Zhen Shi <bicky.shi@huawei.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Tim Deegan <tim@xen.org>
In hap_paging_update_modes, we were getting the gpa of the cr3, rather
than the gfn.
Vmx_load_pdptrs was crashing the host if the cr3 is paged out. Now it
will only crash the guest.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
If the guest balloons away a page that has been nominated for paging but
not yet paged out, we fix:
- Send EVICT_FAIL flag in the event to the pager
- Do not leak the underlying page
If the page was shared, we were not:
- properly refreshing the mfn to balloon after the unshare.
- unlocking the p2m on the error exit case
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
When the subject domain is not the current one (e.g. during domctl or
HVM save/restore handling), use of gdprintk() is questionable at best,
as it won't give the intended information on what domain is affected.
Use plain printk() or dprintk() instead, but keep things (mostly) as
guest messages by using XENLOG_G_*.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Ian Jackson
Roger Pau Monne
Bamvor Jian Zhang
George Dunlap
Olaf Hering
Christoph Egger
Ian Campbell
Anthony PERARD
Shriram Rajagopalan
Juergen Gross
Fabio Fantoni
David Vrabel
Allen Kay
Kaixing Hong
Andres Lagar-Cavilla
Tim Deegan
Jan Beulich