This also includes the x86 ACPI related functions. Remove support for
device model "none"
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Remove the usage of device model "none" in the migration stream
related functions.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
PVH guests use the same device model selection as PV guests, because
PVH guests only use the device model for the PV backends.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
CD-ROM backend selection was partially based on the device model, this
is no longer needed since the device model "none" is now removed, so
HVM guests always have a device model.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Remove the device model "none" support from domain creation and
introduce support for PVH.
This requires changing some of the HVM checks to be applied for both
HVM and PVH.
Setting device model to none was never supported since it was an
unstable interface used while transitioning from PVHv1 to PVHv2.
Now that PVHv1 has been finally removed and that a supported
interface for PVHv2 is being added this option is no longer necessary,
hence it's removed.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The new guest type is introduced to the libxl IDL. libxl__domain_make
is also modified to save the guest type, and libxl__domain_type is
expanded to fetch that information when detecting guest type.
This is required because the hypervisor only differentiates between PV
and HVM guests, so libxl needs some extra information in order to
differentiate between a HVM and a PVH guest.
The new PVH guest type and its options are documented on the xl.cfg
man page.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The new firmware option aims to provide a coherent way to set the
firmware for the different kind of guests Xen supports.
For PV guests the available firmwares are pvgrub{32|64}, and for HVM
the following are supported: bios, uefi, seabios, rombios and ovmf.
Note that uefi maps to ovmf, and bios maps to the default firmware for
each device model.
The xl.cfg man page is updated to document the new feature.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce a new type option to xl configuration files in order to
specify the domain type. This supersedes the current builder option.
The new option is documented in the xl.cfg man page, and the previous
builder option is marked as deprecated.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is required because those options will be used by the new PVH
guest type, and thus need to be shared between PV and HVM.
Defines are added in order to signal consumers that the fields are
available.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Code movement in preparation for making the bootloader,
bootloader_args, nested_hvm and timer_mode fields shared between all
guests types. While moving the code, limit the line-length to 80
columns.
No functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The deprecation involves generating a function that copies the
deprecated fields into it's new location if the new location has not
been set.
The fields that are going to be shared between PVH and HVM or between
PVH and PV are moved to the top level of libxl_domain_build_info, and
the old locations are marked as deprecated.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Those types are missing a helper to check whether a definition of the
type holds the default value. This will be required by a later patch
that will implement deprecation of fields inside of a libxl type.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The pad field needs to be zero as required by the hypervisor.
Instead of setting the pad separately, use C99 initialiser.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Leaf 4 of the Xen-specific CPUID leaves isn't mentioned at all in
include/public/arch-x86/cpuid.h, the comments for leaf 5 don't tell
anything about the sub-leaf semantics.
Add comments to clarify the interface.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
On very large hosts a pv-guest needs to know whether it will have to
handle frame numbers larger than 32 bits in order to select the
appropriate grant interface version.
Add a new Xen specific CPUID node to contain the maximum machine address
width similar to the x86 CPUID node 0x80000008 containing the maximum
physical address width. The maximum frame width needs to take memory
hotplug into account.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Instead of attaching the ARM specific grant table data to the domain
structure add it to struct grant_table. Add the needed arch functions
to the asm-*/grant_table.h includes.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Delay the allocation of the grant table sub structures in order to
allow modifying parameters needed for sizing of these structures at a
per domain basis. Allocate the structures and the table frames only
from grant_table_init().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add new domain config items for setting the limits for the maximum
numbers of grant table frames and maptrack frames of a domain.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add xl.conf config items for default values of grant limits:
max_grant_frames will set the default for the maximum number of grant
frames for a domain which will take effect if the domain's config file
doesn't specify a value. If max_grant_frames isn't set in xl.conf it
will default to 32 for hosts with all memory below 16TB and to 64 for
hosts with memory above 16TB.
max_maptrack_frames will set the default for the maximum number of
maptrack frames for a domain. If max_maptrack_frames isn't set in
xl.conf it will default to 0, as normally only backend domains need
maptrack frames.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add the maximum possible mfn of the host to the libxl_physinfo
data structure.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When creating a Xenstore stubdom set the grant limits: the stubdom
will need to setup a very limited amount of grants only, so 4 grant
frames are enough. For being able to support up to 32768 domains it
will need 128 maptrack frames (1 mapping per domain, 256 maptrack
entries per maptrack frame).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a new libxc function xc_domain_set_gnttbl_limits() setting the
limits for the maximum numbers of grant table frames and maptrack
frames of a domain.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add a function for obtaining the highest possible physical memory
address of the system. This value is influenced by:
- hypervisor configuration (CONFIG_BIGMEM)
- processor capability (max. addressable physical memory)
- memory map at boot time
- memory hotplug capability
Add this value to xen_sysctl_physinfo in order to enable dom0 to do a
proper sizing of grant frame limits of guests.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
When adding support for RDRAND/RDSEED/RDPID I didn't remember to also
update this special early check. Make it (hopefully) future-proof by
also refusing VEX-encodings.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This Patch allows a migration precopy policy to be specified.
The precopy phase of the xc_domain_save() live migration algorithm has
historically been implemented to run until either a) (almost) no pages
are dirty or b) some fixed, hard-coded maximum number of precopy
iterations has been exceeded. This policy and its implementation are
less than ideal for a few reasons:
- the logic of the policy is intertwined with the control flow of the
mechanism of the precopy stage
- it can't take into account facts external to the immediate
migration context, such external state transfer state, interactive
user input, or the passage of wall-clock time.
- it does not permit the user to change their mind, over time, about
what to do at the end of the precopy (they get an unconditional
transition into the stop-and-copy phase of the migration)
To permit callers to implement arbitrary higher-level policies governing
when the live migration precopy phase should end, and what should be
done next:
- add a precopy_policy() callback to the xc_domain_save() user-supplied
callbacks
- during the precopy phase of live migrations, consult this policy after
each batch of pages transmitted and take the dictated action, which
may be to a) abort the migration entirely, b) continue with the
precopy, or c) proceed to the stop-and-copy phase.
- provide an implementation of the old policy, used when
precopy_policy callback is not provided.
Signed-off-by: Jennifer Herbert <Jennifer.Herbert@citrix.com>
Signed-off-by: Joshua Otto <jtotto@uwaterloo.ca>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Instead of letting the vCPU that for first tries to get
some budget take it all (although temporarily), allow each
vCPU to only get a specific quota of the total budget.
This improves fairness, allows for more parallelism, and
prevents vCPUs from not being able to get any budget (e.g.,
because some other vCPU always comes before and gets it all)
for one or more period, and hence starve (and cause troubles
in guest kernels, such as livelocks, triggering of whatchdogs,
etc.).
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
As cap is already present in Credit1, as a parameter, all
the wiring is there already for it to be percolate down
to csched2_dom_cntl() too.
In this commit, we actually deal with it, and implement
setting, changing or disabling the cap of a domain.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
The ABI of {read,write}_msr() requires them to use x86_emul_hw_exception() if
they report an exception with the emulator core.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Coverity points out that next is indeed NULL at times. Only try to read the
.cpuid_faulting field when we sure that next isn't NULL.
Fixes e7a370733b "x86: replace arch_vcpu::cpuid_faulting with msr_vcpu_policy"
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch changes use of bool_t to bool in the ioreq server code. It also
fixes an incorrect indentation in a continuation line.
This patch is purely cosmetic. No semantic or functional change.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Since ioreq servers are only relevant to HVM guests and all the names in
question unequivocally refer to guest frame numbers, name them all .*gfn
to avoid any confusion.
This patch is purely cosmetic. No semantic or functional change.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
PIE may (and commonly will) result in the binary being loaded above
the 4Gb boundary, which can't work with at least the VZEROUPPER compat
mode test.
Add -fno-PIE and -no-pie when appropriate so that gcc won't generate a
PIE executable.
Reported-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
xs_check_watch() checks for watch notifications without blocking.
Together with the binding for xs_fileno(), this makes it possible
to write event-driven clients in Python.
Signed-off-by: Euan Harris <euan.harris@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
When a watch fires, xspy_read_watch() checks whether the client has
registered interest in the path which changed and, if so, returns the
path and a client-supplied token. The binding for xs_check_watch()
needs to do the same, so this patch extracts the search code into a
separate function.
Signed-off-by: Euan Harris <euan.harris@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Roger Pau Monne
Wei Liu
Juergen Gross
Jan Beulich
Jennifer Herbert
Anthony PERARD
Dario Faggioli
Andrew Cooper
Paul Durrant
Euan Harris