to include the vcpu IDs, in a way that matches
how the "dom:vcpu" couple is displayed in other
events (runstate changes).
Also add the trace for TRC_SCHED_SHUTDOWN_CODE which
was missing and was done via SCHEDOP_shutdown_code hypercall.
(TRC_SCHED_SHUTDOWN trace was present).
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Olaf Hering <olaf@aepfle.de>
---
Changes from v1:
* enhanced changelog, as suggested during review.
While to support ACPI, patch "arm/acpi: Parse GTDT to initialize timer"
refactors the functions preinit_xen_time and init_xen_time. But it
wrongly moves the platform_get_irq from init_xen_time to
preinit_dt_xen_time and this will cause booting failure.
So move platform_get_irq back to init_xen_time to fix it.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
No intended functional change, albeit it includes ditching a redundant
is_hvm_domain().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Avoid cache flush on EPT when removing a UC- range, since when used
this type gets converted to UC anyway (there's no UC- among the types
valid in MTRRs and hence EPT's emt field).
We might further wwant to consider only forcing write buffer flushes
when removing WC ranges.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Make it return an error on bad domain kind or obviously bad GFN range.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Its return value can easily serve the purpose. We cannot, however,
return unspecific "success" anymore for a domain of the wrong type -
since no caller exists that would call this for PV domains, simply add
an ASSERT().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Call hvm_get_mem_pinned_cacheattr() for RAM ranges only, and only when
the guest has a physical device assigned: XEN_DOMCTL_pin_mem_cacheattr
is documented to be intended for RAM only.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
... where suitable. But note that the type of "cacheattr" in
get_page_from_l1e() specifically needs to remain "unsigned long".
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This patch modified the control ring protocol (of which there is
not yet an implementation) to make it more general. Most of the
concepts are not limited to toeplitz hashing so it's best not to
make them unnecessarily specific.
Apart from changing the names of various definitions and modifying
comments, this patch:
- Adds a new control message type to select a hash algorithm.
- Adds a reference implementation of the toeplitz hash.
- Changes the 'toeplitz' extra info fragment into a 'hash' extra
info fragment and replaces the octet of padding with the index of
the algorithm that was used to create the hash value.
- Relaxes the restriction that the mapping table has to be
power-of-2 sized.
The patch also fixes a few spelling typos noticed along the way.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Otherwise a custom XEN_ERRNO definition will not end up creating appropriately
namespaced constants for the aliases.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Define new command line parameter "acpi" to enable/disable acpi.
This implements the following policy to decide whether ACPI should be
used to boot the system:
- acpi=off: ACPI will not be used to boot the system, even if there is
no alternative available (e.g., device tree is empty)
- acpi=force: only ACPI will be used to boot the system; if that fails,
there will be no fallback to alternative methods (such as device tree)
- otherwise, ACPI will be used as a fallback if the device tree turns
out to lack a platform description; the heuristic to decide this is
whether /chosen is the only node present at depth 1
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Parse GTDT (Generic Timer Descriptor Table) to initialize timer. Using
the information presented by GTDT to initialize the arch timer (not
memory-mapped).
Signed-off-by: Parth Dixit <parth.dixit@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Since ACPI 6.0 defines that GIC Distributor Structure contains the GIC
version filed, it could get GIC version from that. Then call acpi device
initializing function to preinit GIC device.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
ACPI on Xen hypervisor uses MADT table for proper GIC initialization.
First get the GIC version from GIC Distributor. Then parse GIC related
subtables, collect CPU interface and distributor addresses and call
driver initialization function (which is hardware abstraction agnostic).
In a similar way, FDT initialize GICv2.
Signed-off-by: Parth Dixit <parth.dixit@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This function could get the specified index entry of MADT table. This
would be useful when it needs to get the contens of the entry.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
ACPI 5.1 only has two explicit methods to boot up SMP, PSCI and Parking
protocol, but the Parking protocol is only specified for ARMv7 now, so
make PSCI as the only way for the SMP boot protocol before some updates
for the ACPI spec or the Parking protocol spec.
ACPI only supports PSCI 0.2+, since prior to PSCI 0.2 function IDs are
not well-defined.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Parth Dixit <parth.dixit@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
MADT contains the information for MPIDR which is essential for SMP
initialization, parse the GIC cpu interface structures to get the MPIDR
value and map it to cpu_logical_map(), and add enabled cpu with valid
MPIDR into cpu_possible_map.
Move BAD_MADT_ENTRY to common place, parenthesize its parameters and
drop the pointer cast.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Naresh Bhat <naresh.bhat@linaro.org>
Signed-off-by: Parth Dixit <parth.dixit@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
There are two flags: PSCI_COMPLIANT and PSCI_USE_HVC. When set, the
former signals to the OS that the hardware is PSCI compliant. The latter
selects the appropriate conduit for PSCI calls by toggling between
Hypervisor Calls (HVC) and Secure Monitor Calls (SMC). FADT table
contains such information, parse FADT to get the flags for furture
usage.
Since STAO table and the GIC version are introduced by ACPI 6.0, we will
check the version and only parse FADT table with version >= 6.0. If
firmware provides ACPI tables with ACPI version less than 6.0, OS will
be messed up with those information, so disable ACPI if we get an FADT
table with version less than 6.0.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Naresh Bhat <naresh.bhat@linaro.org>
Signed-off-by: Parth Dixit <parth.dixit@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
These POSIX errnos are expected by other areas of the Xen public interface,
specifically public/io/xs_wire.h
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Ifdef'ing CONFIG_ARM in xen/arch/arm/efi/efi-boot.h is redundant, remove
the condition and simplify the ifdef's.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
When taking cpus offline for suspend or bringing them online on resume
again the scheduler might issue debug messages when temporarily
breaking vcpu affinity or restoring the original affinity settings.
The resume message can be removed completely, while the message when
breaking affinity should only be issued if the breakage is permanent.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Dario Faggioli <dario.faggioli@citrix.com>
This will cause failed builds and when the build flips back to success
to be reported to #xentest on FreeNode. The syntax of the message will
be:
<travis-ci> xen-project/xen#BUILDID (BRANCH - REVISION : COMMITTER)
<travis-ci> Change view :
https://github.com/xen-project/xen/compare/RANGE
<travis-ci> Build details :
https://travis-ci.org/xen-project/xen/builds/BUILDID
The blob was generated with the following command:
travis encrypt -r xen-project/xen 'chat.freenode.net#xentest'
The reason it is encrypted is to prevent people that fork the repo to
spam #xentest. This value will only properly decrypt when running within
the xen-project/xen space.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
AC_CHECK_LIB() was running gcc -Llib -lm -lutils conftest.c which on
platforms that do as needed operations by default will result in
underlinking. Instead AC_CHECK_LIB() suggests supplying the extra
libraries necessary in a 5th argument.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If hardware support memory protect externsion, expose this feature
to guest by default. Users don't have to use a 'cpuid= ' option in
config file to turn it on.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
bcc/ld86/as86 are necessary when we build ROMBIOS. However if we do not
build it (and are not building qemu-trad), the build requirements are
overly strict and can lead to failures.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Coverity rightly points out that qmp->buffer may not be NULL
terminated when passed to strncat.
Make the actual buffer a byte bigger than QMP_RECEIVE_BUFFER_SIZE and
always append a NULL byte.
I suspect that in practice we have not yet seen QMP messages
approaching the buffer size (4K).
Compile tested only.
CID: 1055989
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The contents of /proc/uptime is typically something like "80164.57
640617.58", so the existing 512 byte buffer is more than large enoguh,
so reduce its effective size to 511 bytes and ensure we include a
NULL.
Otherwise Coverity points out that we pass a potentially unterminated
string to strtok. In practice this likely doesn't actually cause
issues (at least on Linux) because the
string should always contain a space so we will stop parsing.
CID: 105590
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Dom0 is handled separately (via print_dom0_uptime) and the domU
variant doesn't work for dom0 since libxl_vm_get_start_time() doesn't.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>